This is a pre-requisite for runtime pm on powerxpress systems.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows you to enable dither in the display hardware
when the monitor supports lower a lower bpc than the
current framebuffer format.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The FMT blocks control how data is sent from the backend
of the display pipe to to monitor.  Proper set up of the
FMT blocks are required for 30bpp formats.  Additionally,
dithering can be enabled on for better display with 18 and
24bpp displays.  The exception is LVDS/eDP which atom
takes care of in the SelectCRTC_Source table.  For now
just enable truncation until we test dithering more.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

device_unregister() already drops its reference to the struct device, so
explicitly calling put_device() before device_unregister() can cause the
device to have been freed before it can be unregistered.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-next-2013-10-18' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

- CRC support from Damien and He Shuang. Long term this should allow us to
  test an awful lot modesetting corner cases automatically. So for me as
  the maintainer this is really big.
- HDMI audio fix from Jani.
- VLV dpll computation code refactoring from Ville.
- Fixups for the gpu booster from last time around (Chris).
- Some cleanups in the context code from Ben.
- More watermark work from Ville (we'll be getting there ...).
- vblank timestamp improvements from Ville.
- CONFIG_FB=n support, including drm core changes to make the fbdev
  helpers optional.
- DP link training improvements (Jani).
- mmio vtable from Ben, prep work for future hw.

* tag 'drm-intel-next-2013-10-18' of git://people.freedesktop.org/~danvet/drm-intel: (132 commits)
  drm/i915/dp: don't mention eDP bpp clamping if it doesn't affect bpp
  drm/i915: remove dead code in ironlake_crtc_mode_set
  drm/i915: crc support for hsw
  drm/i915: fix CRC debugfs setup
  drm/i915: wait one vblank when disabling CRCs
  drm/i915: use ->get_vblank_counter for the crc frame counter
  drm/i915: wire up CRC interrupt for ilk/snb
  drm/i915: add CRC #defines for ilk/snb
  drm/i915: extract display_pipe_crc_update
  drm/i915: don't Oops in debugfs for I915_FBDEV=n
  drm/i915: set HDMI pixel clock in audio configuration
  drm/i915: pass mode to ELD write vfuncs
  cpufreq: Add dummy cpufreq_cpu_get/put for CONFIG_CPU_FREQ=n
  drm/i915: check gem bo size when creating framebuffers
  drm/i915: Use unsigned long for obj->user_pin_count
  drm/i915: prevent tiling changes on framebuffer backing storage
  drm/i915: grab dev->struct_mutex around framebuffer_init
  drm/i915: vlv: fix VGA hotplug after modeset
  drm: add support for additional stereo 3D modes
  drm/i915: preserve dispaly init order on ByT
  ...

To disable a monitor, a Spice client sends a monitor config with the
monitor resolution to 0x0.

However, before qxl_crtc_disable() is reached after the hotplug event,
it can happen that another monitor is reconfigured, and
qxl_send_monitors_config() is called with the old config, which will
re-enable the monitor on the client.

Reset config if monitor is found disconnected, during
drm_helper_hpd_irq_event().
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

All hard-coded resolutions are passing this check.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

By default, 1024x768 is the preferred resolution. However, when a
monitor config is given, it should be the only preferred resolution.

Note that the monitor config resolution is passed to
qxl_add_common_modes() to avoid adding a duplicate mode without the
preferred resolution. That would discard the previous monitor config
preferred bit.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In commit 38d5487d, Keith explained:
    This patch simply merges the two mode type bits together; that seems
    reasonable to me, but perhaps only a subset of the bits should be
    used? None of these can be user defined as they all come from
    looking at just the hardware.

However, merging the bits means that a flag becomes sticky. It is not
possible, for example to update the mode type to remove the
DRM_MODE_TYPE_PREFERRED bit.

After a brief discussion with Dave Airlie on irc, it was agreed to
propose that change, instead of introducing another function to remove a
bit from exisiting modes type.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

drm_helper_hpd_irq_event() only notifies when the connector status
changed. However, Spice monitor config can change while the connector is
connected, to support arbitrary resolution. Do an hotplug event if it
wasn't done by drm_helper_hpd_irq_event().
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The caller may want to know whether the configuration was changed, and
if an hotplug event was sent.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fix a little spelling of drm_crtc_convert_umode() comment.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fix build on non-ARM
* 'drm-tda998x-3.12-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox:
  DRM: Armada: depend on ARM

Armada DRM uses relaxed accessors which are not available on other
platforms.  Limit it to just ARM.
Acked-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This adds support for the Armada 510 display subsystem found on the
Marvell Dove devices.  This IP is re-used across several different Marvell
SoCs with various tweaks, and this driver has been structured to allow
the other IPs to re-use the bulk of this code; further work in this area
is expected from interested parties.

This has been extensively tested on the SolidRun Cubox platform and
appears to work well there.

[airlied: update for api changes merged previous to this]

So drm was abusing device lifetimes, by having embedded device structures
in the minor and connector it meant that the lifetime of the internal drm
objects (drm_minor and drm_connector) were tied to the lifetime of the device
files in sysfs, so if something kept those files opened the current code
would kfree the objects and things would go downhill from there.

Now in reality there is no need for these lifetimes to be so intertwined,
especailly with hotplugging of devices where we wish to remove the sysfs
and userspace facing pieces before we can unwind the internal objects due
to open userspace files or mmaps, so split the objects out so the struct
device is no longer embedded and do what fbdev does and just allocate
and remove the sysfs inodes separately.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add support for TDA998x output via the slave driver in the kernel.
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds ARGB hardware cursor support to the DRM driver for the
Marvell Armada SoCs.  ARGB cursors are supported at either 32x64 or
64x32 resolutions.
Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This is useful with the follow-up patch that frobs
dev_priv->vbt.edp_bpp, and the value no longer comes directly from
VBT.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In

Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Jun 5 13:34:23 2013 +0200

    drm/i915: consolidate pch pll enable sequence

I've removed all the code from this if block, but somehow forgotten to
kill the block itself.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

hw designers decided to change the CRC registers and coalesce them all
into one. Otherwise nothing changed. I've opted for a new hsw_ version
to grab the crc sample since hsw+1 will have the same crc registers,
but different interrupt source registers. So this little helper
function will come handy there.

Also refactor the display error handler with a neat pipe loop.

v2: Use for_each_pipe.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We've set up all files, but removed only those for which we have a
pipe. Which leaves the one for pipe C on machines with less than 2
pipes, breaking module reload.

v2: We can't get at the drm device this early (wtf), so just register
all the files and also remove them all again.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This avoids a spurious spurious interrupt warning.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Suggested by Ville.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We enable the interrupt unconditionally and only control it
through the enable bit in the CRC control register.

v2: Extract per-platform helpers to compute the register values.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Also add a new _PIPE_INC macro which takes an base plus increment.
Much less likely to botch the job by missing an s/A/B/ somewhere.

v2: They've moved the bitfield. Argh!
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The ringbuffer update logic should always be the same, but different
platforms have different amounts of CRC registers. Hence extract it.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Failed to properly test this.
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The HDMI audio expects HDMI pixel clock to be set in the audio
configuration. We've currently just set 0, using 25.2 / 1.001 kHz
frequency, which fails with some modes.

v2: Now with a commit message.

Reference: http://mid.gmane.org/CAGpEb3Ep1LRZETPxHGRfBDqr5Ts2tAc8gCukWwugUf1U5NYv1g@mail.gmail.com
Reference: http://mid.gmane.org/20130206213533.GA16367@hardeman.nuReported-by: NDavid Härdeman <david@hardeman.nu>
Reported-by: NJasper Smet <josbeir@gmail.com>
Tested-by: NJasper Smet <josbeir@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This will be needed for setting the HDMI pixel clock for audio
config. No functional changes.

v2: Now with a commit message.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The drm/i915 driver wants to adjust it's own power policies using the
cpu policies as a guideline (we can implicitly boost the cpus through
the gpus on some platforms). To avoid a dreaded select (since a
depends will leave users wondering where where their driver has gone
too) add dummy functions.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: cpufreq@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's better to catch such fallout early, and this way we can rely on
the checking done by the drm core on fb->heigh/width at modeset time.

If we ever support planar formats on intel we might want to look into
a common helper to do all this, but for now this is good enough.

v2: Take tiling into account, requested by Ville.

v3: Fix tile height on gen2, spotted by Ville.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Requested-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

At least on linux sizeof(long) == sizeof(void*) and the thinking
is that you can grab about as many references as there's memory.

Doesn't really matter, just a bit of OCD since the fixed size data
type in a pure in-kernel datastructure look off.

v2: Ville asked for an overflow check since no one prevents userspace
from incrementing the pin count forever.

v3: s/INT/LONG/, noticed by Chris.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Assuming that all framebuffer related metadata is invariant simplifies
our userspace input data checking. And current userspace always first
updates the tiling of an object before creating a framebuffer with it.

This allows us to upconvert a check in pin_and_fence to a WARN.

In the future it should also be helpful to know which buffer objects
are potential scanout targets for e.g. frontbuffer rendering tracking
and similar things.

Note that SNA shipped for one prerelease with code which will be
broken through this patch. But users shouldn't notice since it's
purely an optimization and will transparently fall back to allocating
a new fb. i-g-t also had offending code (now fixed), but we don't
really care about breaking the test-suite.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Grumpily-reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We look at gem state (like obj->tiling/obj->stride), we better have
the relevant locks.

Right now this doesn't matter much since most of these checks are
a curtesy to safe buggy userspace, but I'd like to freeze the tiling
once we have framebuffer objects attached. And then locking matters.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since

commit 912d812e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 11 20:08:23 2012 +0200

    drm/i915/crt: don't set HOTPLUG bits on !PCH

on VLV we don't detect any VGA unplug event after a modeset, since there we
reset the ADPA hotplug bits. Fix it by preserving the hotplug bits on VLV as
well.
Signed-off-by: NImre Deak <imre.deak@intel.com>
[danvet: For consistency use gen >= 5 like in Chris' exact same fix
in intel_crt_reset.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Parse the 3D_Structure_ALL and 3D_MASK fields of the HDMI Vendor
Specific Data Block to expose more stereo 3D modes.

v2: Use (1 << 0) for consistency. (Ville Syrjälä)
    Skip adding any modes if 3D_MASK is indicated as being present but
    the length only includes 3D_Structure_ALL. (Ville Syrjälä)
    Check that the value of HDMI_3D_LEN is large enough to include
    3D_Structure_ALL and 3D_MASK, if they are present. (Ville Syrjälä)
v3: Increment offset before the length checks. (Ville Syrjälä)
Signed-off-by: NThomas Wood <thomas.wood@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch changes HDMI port registration order for the BayTrail platform.

The story is that in kernel version 3.11 i915 supported only one HDMI port -
the HDMIB port. So this port ended up being HDMI-1 in user-space.

But commit '6f6005a5 drm/i915: expose HDMI connectors on port C on BYT'
introduced HDMIC port support. And added HDMIC  registration prior to HDMIB,
so HDMIB became HDMI-2 and HDMIC became HDMI-1.

Well, this is fine as far as the kernel is concerned. i915 does not give any
guarantees to the numbering, and has never given them.

However, this breaks wayland setup in Tizen IVI. We have only one single HDMI
port on our hardware, and it is connected to HDMIB. Our configuration relies on
the fact that it is HDMI-1.

Well, certainly this is user-space problem which was exposed with Jesse's
patch. However, there is a reason why we have to do this assumption - we use
touchscreen monitors and we have to associate event devices with the monitors,
and this is not easy to do dynamically, so we just have a static setup.

Anyway, while the user-space setup will have to be fixed regardless, let's
chane the HDMI port registration order so that HDMIB stays HDMI-1, just like it
was in 3.11. Simply because there is no strong reason for changing the order in
the kernel, and it'll help setups like ours in sense that we'll have more time
for fixing the issue properly.

Also amend the commentary which looks a bit out-of-date.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
[danvet: Drop the commment, SDVOC is gone and we have a proper HDMIC
define now.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>