Some platforms e.g. TI Davinci require 32-bit accesses to the UARTs.
The of_serial driver currently registers all UARTs as UPIO_MEM.  Add a
new attribute "reg-io-width" to allow the port to be registered with
different IO width requirements.
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Some platform code has specific requirements on the naming of devices.
This patch allows callers of of_platform_populate() to provide a
device name lookup table.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Add a function to create amba_devices (i.e. primecell peripherals)
from device tree nodes. The device tree scanning is done by the
of_platform_populate() function which can call of_amba_device_create
based on a match table entry.

Nodes with a "arm,primecell-periphid" property can override the h/w
peripheral id value.

Based on the original work by Jeremy Kerr.
Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
[grant.likely: add Jeremy's original s-o-b line, changes from review
               comments, and moved all code to drivers/of/platform.c]
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

of_platform_populate() is similar to of_platform_bus_probe() except
that it strictly enforces that all device nodes must have a compatible
property, and it can be used to register devices (not buses) which are
children of the root node.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

No need for most platforms to define their own bus table when calling
of_platform_populate().  Supply a stock one.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

0xff01 is not an actual voltage value, but a flag
for the driver.  If the power state as that value,
skip setting the voltage.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Because the socket buffer is freed in the completion interrupt, it is not
safe to access it after submitting it to the hardware.

Cc: stable@kernel.org
Cc: Sachin Sanap <ssanap@marvell.com>
Cc: Zhangfei Gao <zgao6@marvell.com>
Cc: Philip Rakity <prakity@marvell.com>
Signed-off-by: NRichard Cochran <richard.cochran@omicron.at>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As soon as skb is given to hardware, TX completion can free skb under
us.
Therefore, we should update dev stats before kicking the device.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

this printk isn't really useful, just drop it for now.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Since we were calling the wptr function before checking if the IH was
even enabled, or the GPU wasn't shutdown, we'd get spam in the logs when
the GPU readback 0xffffffff. This reorders things so we return early
in the no IH and GPU shutdown cases.

Reported-and-tested-by: ManDay on #radeon
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is used during phy init to set up the phy for DP.  This may
fix DP problems on DCE3.2 cards.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Certain revisions of the vbios on DCE3.2 cards have a bug
in the transmitter control table which prevents duallink from
being enabled properly on some cards.  The action switch statement
jumps to the wrong offset for the OUTPUT_ENABLE action.  The fix
is to use the ENABLE action rather than the OUTPUT_ENABLE action
on the affected cards.  In fixed version of the vbios, both
actions jump to the same offset, so the change should be safe.
Reported-and-tested-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Its illegal to dereference skb after dev_kfree_skb(skb)
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Robin Holt <holt@sgi.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As soon as skb is given to hardware and spinlock released, TX completion
can free skb under us. Therefore, we should update netdev stats before
spinlock release.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise we will not see the name of the slave dev in error
message:

[  388.469446] (null):  doesn't support polling, aborting.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to the data sheet for G4, AP4 and AG5 KEYSC MODE_6 is 8x8 keys.
Bump up MAXKEYS to 64 too.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Reviewed-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Otherwise the updated evdev driver (commit cdda911c,
"Input: evdev - only signal polls on full packets") no longer works on
top of omap-keypad.

Tested on Amstrad Delta.
Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We should only wake waiters on the event device when we actually post
an EV_SYN/SYN_REPORT to the queue. Otherwise we end up making waiting
threads runnable only to go right back to sleep because the device
still isn't readable.
Reported-by: NJeffrey Brown <jeffbrown@android.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Initialize dynamically allocated sysfs attributes before device_create_file()
call to suppress lockdep_init_map() warning if lockdep debugging is enabled.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org # 2.6.34+

Initialize dynamically allocated sysfs attributes before device_create_file()
call to suppress lockdep_init_map() warning if lockdep debugging is enabled.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org # 2.6.34+

Initialize dynamically allocated sysfs attributes before device_create_file()
call to suppress lockdep_init_map() warning if lockdep debugging is enabled.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org # 2.6.34+

Call sysfs_attr_init() from atk_init_attribute() to handle sysfs attribute
initialization in a single function.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Cc: Luca Tettamanti <kronos.it@gmail.com>
Acked-by: NJean Delvare <khali@linux-fr.org>

pdev_entry.cpu and pdev_entry.cpu_core_id aren't used anywhere in the
driver code so we can drop these struct members.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

The DDX modifies DMA_SEMAPHORE on nv50 in order to implement sync-to-vblank,
things will go very wrong for cross-channel sync after this.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

While parsing the perf table, there is no check if
the num of entries read from the vbios is less than
the currently allocated number.

In case of a buggy vbios this will cause overwriting
of kernel memory, causing aditional problems.

Add a simple check in order to prevent the case
Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The failure appeared in dmesg as:

[drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt
ring idle [waiting on 35064155, at 35064155], missed IRQ?

This works around that problem on by making the blitter command
streamer write interrupt state to the Hardware Status Page when a
MI_USER_INTERRUPT command is decoded, which appears to force the seqno
out to memory before the interrupt happens.

v1->v2: Moved to prior interrupt handler installation and RMW flags as
per feedback.
v2->v3: Removed RMW of flags (by anholt)

Cc: stable@kernel.org
Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [v1]
Tested-by: Eric Anholt <eric@anholt.net> [v1,v3]
	   (incidence of the bug with a testcase went from avg 2/1000 to
	   0/12651 in the latest test run (plus more for v1))
Tested-by: Kenneth Graunke <kenneth@whitecape.org> [v1]
Tested-by: Robert Hooker <robert.hooker@canonical.com> [v1]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33394Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>

if_open() calls try_module_get(), and after an attempt to lock a mutex
the if_open() function may return -ERESTARTSYS without
putting the module.  Then, when if_open() is executed again,
try_module_get() is called making the reference counter of THIS_MODULE
greater than one at successful exit from if_open().  The if_close()
function puts the module only once, and as a result it can't be
unloaded.

This patch adds module_put call before the return from if_open().

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NPavel Shved <shved@ispras.ru>
Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>

The fst_open() function, after a successful try_module_get() may return
an error code if hdlc_open() returns it.  However, it does not put the
module on this error path.

This patch adds the necessary module_put() call.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NPavel Shved <shved@ispras.ru>
Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>

The RIPTR and TIPTR  (receive/transmit internal temporary data pointer),
used by microcode as a temporary buffer for data, must be 32-byte aligned
according to the RM for MPC8247.

Tested on mgcoge.
Signed-off-by: NClive Stubbings <clive.stubbings@xentech.co.uk>
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
cc: Pantelis Antoniou <pantelis.antoniou@gmail.com>
cc: Vitaly Bordug <vbordug@ru.mvista.com>
cc: netdev@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>

The default bits per word setting should be 8 bits, but since most of our
devices have been explicitly setting this up, we didn't notice when the
default stopped working.

At the moment, any default transfers without an explicit bit size setting
error out with:
bfin-spi bfin-spi.0: transfer: unsupported bits_per_word

So in the transfer logic, have a bits_per_word setting of 0 fall into the
8 bit transfer logic.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

The size of the desc array is not the size of the desc structure, so
when we try to free up things, we leak some parts.
Reported-by: NRegis Dargent <rdargent@edevice.com>
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>

Commit 8d8fc29d changed the behavior of slave
devices in regards to netpoll.  Specifically it created a mutually exclusive
relationship between being a slave and a netpoll-capable device.  This creates
problems for KVM because guests relied on needing netconsole active on a slave
device to a bridge.  Ideally libvirtd could just attach netconsole to the bridge
device instead, but thats currently infeasible, because while the bridge device
supports netpoll, it requires that all slave interface also support it, but the
tun/tap driver currently does not.  The most direct solution is to teach tun/tap
to support netpoll, which is implemented by the patch below.

I've not tested this yet, but its pretty straightforward.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Reported-by: NRik van Riel <riel@redhat.com>
CC: Rik van Riel <riel@redhat.com>
CC: Maxim Krasnyansky <maxk@qualcomm.com>
CC: Cong Wang <amwang@redhat.com>
CC: "David S. Miller" <davem@davemloft.net>
Reviewed-by: NRik van Riel <riel@redhat.com>
Tested-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NWANG Cong <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>

The dp83640 PHY provides time stamp and other information via special
PHY status frames. Previously, the driver decoded the frames and then
let the network stack drop them. This works fine when the PTP messages
come over UDP.

However, when receiving PTP messages via L2 packets, this creates a
problem. The status frames use the official PTP destination MAC address,
and so they are delivered to user space along with the "real" frames,
causing confusion for applications.

This commit fixes the issue by simply dropping the PHY status frames
in the driver.
Signed-off-by: NRichard Cochran <richard.cochran@omicron.at>
Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>

If two eternal time stamp events occur at nearly the same time, the
phyter will add an extra word into the status frame. This commit fixes
the parsing code to recognize and skip over the extra word.
Signed-off-by: NRichard Cochran <richard.cochran@omicron.at>
Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>

This PHY is available integrated into BCM63xx series SOCs only.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/phy/Kconfig |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
Acked-by: NFlorian Fainelli <ffainelli@freebox.fr>
Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>

Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>

Introducing driver for the network port of Samsung Kalmia based USB LTE modems.
It has also an ACM interface that previous patches associates with the "option"
module. To access those interfaces, the modem must first be switched from modem
mode using a tool like usb_modeswitch.

As the proprietary protocol has been discovered by watching the MS Windows driver
behavior, there might be errors in the protocol handling, but stable and fast
connection has been established for hours with Norwegian operator NetCom that
distributes this modem with their LTE/4G subscription.

More and updated information about how to use this driver is available here:

http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465
https://github.com/mkotsbak/Samsung-GT-B3730-linux-driverSigned-off-by: NMarius B. Kotsbak <marius@kotsbak.com>
Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>