Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jd8tqbx8o8bs4t4g50vyhoc2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since we need evsel->{attr.{sample_{id_all,type}},sample_size},
reducing the number of parameters tools have to pass.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wdtmgak0ihgsmw1brb54a8h4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

That is a more compact form of perf_session__parse_sample and to support
multiple evlists per perf_session is the way to go anyway.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vkxx3j5qktoj11bvcwmfjj13@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Removing perf_session->id_hdr_size, as it can be obtained from the
evsel/evlist.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1nwc2kslu7gsfblu98xbqbll@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Removing perf_session->sample_id_all, as it can be obtained from the
evsel/evlist.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ok58u1mlc5ci9b6p36r52uh1@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Removing perf_session->sample_type, as it can be obtained from the
evsel/evlist.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mnt1zwlik7sp7z6ljc9kyefg@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that we don't have to store it in the perf_session instance, because
in the future perf_session instances may have multiple evlists, each
with different sample_type/sizes.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ptod86fxkpgq3h62m9refkv4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It was a mistake just replace assert to BUG_ON since its condition
should be negated. Fix it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1343267410-7758-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Following commit introduced wrong array boundaries, that could lead to
SIGSEGV.

  perf symbols: Factor DSO symtab types to generic binary types
  commit 44f24cb3
  Author: Jiri Olsa <jolsa@redhat.com>

Fixing to use proper array size.
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Link: http://lkml.kernel.org/r/1343825277-10517-1-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Parse events tests got broken after following commit:

  perf tools: Fix trace events storms due to weight demux
  commit 0983cc0d
  Author: Frederic Weisbecker <fweisbec@gmail.com>

that added PERF_SAMPLE_PERIOD sample type for tracepoints.

Updating related tests.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1343825338-10618-1-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Like do_wp_page(), __replace_page() should do munlock_vma_page()
for the case when the old page still has other !VM_LOCKED
mappings. Unfortunately this needs mm/internal.h.

Also, move put_page() outside of ptl lock. This doesn't really
matter but looks a bit better.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120729182249.GA20372@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

1. vma_address() returns loff_t, this looks confusing and this
   is unnecessary after the previous change. Make it return "ulong",
   all callers truncate the result anyway.

2. Its name conflicts with mm/rmap.c:vma_address(), rename it to
   offset_to_vaddr(), this matches vaddr_to_offset().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120729182247.GA20365@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

1. register_for_each_vma() checks that vma_address() == vaddr,
   but this is not enough. We should also ensure that
   vaddr >= vm_start, find_vma() guarantees "vaddr < vm_end" only.

2. After the prevous changes, register_for_each_vma() is the
   only reason why vma_address() has to return loff_t, all other
   users know that we have the valid mapping at this offset and
   thus the overflow is not possible.

   Change the code to use vaddr_to_offset() instead, imho this looks
   more clean/understandable and now we can change vma_address().

3. While at it, remove the unnecessary type-cast.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120729182244.GA20362@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add the new helper, vaddr_to_offset(vma, vaddr) which returns
the offset in vma->vm_file this vaddr is mapped at.

Change build_probe_list() and find_active_uprobe() to use the
new helper, the next patch adds another user.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120729182242.GA20355@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Currently build_probe_list() builds the list of all uprobes
attached to the given inode, and the caller should filter out
those who don't fall into the [start,end) range, this is
sub-optimal.

This patch turns find_least_offset_node() into
find_node_in_range() which returns the first node inside the
[min,max] range, and changes build_probe_list() to use this node
as a starting point for rb_prev() and rb_next() to find all
other nodes the caller needs. The resulting list is no longer
sorted but we do not care.

This can speed up both build_probe_list() and the callers, but
there is another reason to introduce find_node_in_range(). It
can be used to figure out whether the given vma has uprobes or
not, this will be needed soon.

While at it, shift INIT_LIST_HEAD(tmp_list) into
build_probe_list().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120729182240.GA20352@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Remove insert_vm_struct()->uprobe_mmap(). It is not needed, nobody
except arch/ia64/kernel/perfmon.c uses insert_vm_struct(vma)
with vma->vm_file != NULL.

And it is wrong. Again, get_user_pages() can not succeed before
vma_link(vma) makes is visible to find_vma(). And even if this
worked, we must not insert the new bp before this mapping is
visible to vma_prio_tree_foreach() for uprobe_unregister().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120729182238.GA20349@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Remove copy_vma()->uprobe_mmap(new_vma), it is absolutely wrong.

This new_vma was just initialized to represent the new unmapped
area, [vm_start, vm_end) was returned by get_unmapped_area() in
the caller.

This means that uprobe_mmap()->get_user_pages() will fail for
sure, simply because find_vma() can never succeed. And I
verified that sys_mremap()->mremap_to() indeed always fails with
the wrong ENOMEM code if [addr, addr+old_len] is probed.

And why this uprobe_mmap() was added? I believe the intent was
wrong. Note that the caller is going to do move_page_tables(),
all registered uprobes are already faulted in, we only change
the virtual addresses.

NOTE: However, somehow we need to close the race with
uprobe_register() which relies on map_info->vaddr. This needs
another fix I'll try to do later. Probably we need uprobe_mmap()
in move_vma() but we can not do this right now, this can confuse
uprobes_state.counter (which I still hope we are going to kill).
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120729182236.GA20342@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

vma->vm_pgoff is "unsigned long", it should be promoted to
loff_t before the multiplication to avoid the overflow.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120729182233.GA20339@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

uprobe_munmap() does get_user_pages() and it is also called from
the final mmput()->exit_mmap() path. This slows down
exit/mmput() for no reason, and I think  it is simply
dangerous/wrong to try to fault-in a page into the dying mm. If
nothing else, this happens after the last sync_mm_rss(), afaics
handle_mm_fault() can change the task->rss_stat and make the
subsequent check_mm() unhappy.

Change uprobe_munmap() to check mm->mm_users != 0.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120729182231.GA20336@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The bug was introduced by me in 449d0d7c ("uprobes: Simplify the
usage of uprobe->pending_list").

Yes, we do not care about uprobe->pending_list after return and
nobody can remove the current list entry, but put_uprobe(uprobe)
can actually free it and thus we need list_for_each_safe().
Reported-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Link: http://lkml.kernel.org/r/20120729182229.GA20329@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The comment above write_opcode()->lock_page(old_page) tells
about the race with do_wp_page(). I don't really understand
which exactly race it means, but afaics this lock_page() was not
enough to close all races with do_wp_page().

Anyway, since:

   77fc4af1 uprobes: Change register_for_each_vma() to take mm->mmap_sem for writing

this code is always called with ->mmap_sem held for writing,
so we can forget about do_wp_page().

However, we can't simply remove this lock_page(), and the only
(afaics) reason is __replace_page()->try_to_free_swap().

Nothing in write_opcode() needs it, move it into
__replace_page() and fix the comment.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120729182220.GA20322@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

write_opcode() does lock_page(new_page) for no reason. Nobody
can see this page until __replace_page() exposes it under ptl
lock, and we do nothing with this page after pte_unmap_unlock().

If nothing else, the similar code in do_wp_page() doesn't lock
the new page for page_add_new_anon_rmap/set_pte_at_notify.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120729182218.GA20315@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

page_address_in_vma(old_page) in __replace_page() is ugly and
wrong. The caller already knows the correct virtual address,
this page was found by get_user_pages(vaddr).

However, page_address_in_vma() can actually fail if
page->mapping was cleared by __delete_from_page_cache() after
get_user_pages() returns. But this means the race with page
reclaim, write_opcode() should not fail, it should retry and
read this page again. Probably the race with remove_mapping() is
not possible due to page_freeze_refs() logic, but afaics at
least shmem_writepage()->shmem_delete_from_page_cache() can
clear ->mapping.

We could change __replace_page() to return -EAGAIN in this case,
but it would be better to simply use the caller's vaddr and rely
on page_check_address().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120729182216.GA20311@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

write_opcode() rechecks valid_vma() and ->f_mapping, this is
pointless. The caller, register_for_each_vma() or uprobe_mmap(),
has already done these checks under mmap_sem.

To clarify, uprobe_mmap() checks valid_vma() only, but we can
rely on build_probe_list(vm_file->f_mapping->host).
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120729182212.GA20304@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When CONFIG_PERF_EVENTS disabled, there will have a compiliation
error, because missing struct before structure name.
Signed-off-by: NJovi Zhang <bookjovi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Kosina <trivial@kernel.org>
Link: http://lkml.kernel.org/r/CACV3sbKF%3DCX%2B2jWEWesfCA6rBoQ3wDM4-5ac9MuBtVbCtMRHdQ@mail.gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The event control register of SNB-EP uncore QPI box has a one bit
extension at bit position 21.
Reported-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1343097850-4348-1-git-send-email-zheng.z.yan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fix:

 arch/x86/kernel/cpu/perf_event.h:377:43: sparse: dubious one-bit signed bitfield

Cc: Borislav Petkov <bp@amd64.org>
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-2jxkmktkppkclj1qe6qxd7ah@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

LLC-* and node-* events require using the OFFCORE_RESPONSE events
on SandyBridge, but the hw_cache_extra_regs is left uninitialized.
This patch adds the missing extra register configure table for
SandyBridge.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342517275-2875-1-git-send-email-zheng.z.yan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The uncore subsystem in Nehalem-EX consists of 7 components
(U-Box, C-Box, B-Box, S-Box, R-Box, M-Box and W-Box). This
patch is large because the way to program these boxes is
diverse.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4FF534F1.3030307@intel.com
[ Improved the code. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The format definition of uncore PCU filter should be filter_band*
instead of filter_brand*.
Reported-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1343024611-4692-1-git-send-email-zheng.z.yan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Otherwise they can't be filtered for a defined task:

  perf record -e sched:sched_switch ./foo

This command doesn't report any events without this patch.

I think it isn't a security concern if someone knows who will
be executed next - this can already be observed by polling /proc
state. By default perf is disabled for non-root users in any case.

I need these events for profiling sleep times.  sched_switch is used for
getting callchains and sched_stat_* is used for getting time periods.
These events are combined in user space, then it can be analyzed by
perf tools.
Signed-off-by: NAndrew Vagin <avagin@openvz.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arun Sharma <asharma@fb.com>
Link: http://lkml.kernel.org/r/1342088069-1005148-1-git-send-email-avagin@openvz.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core fixes and improvements from Arnaldo Carvalho de Melo:

 * libtraceevent build fixes from Namhyung Kim

 * Prevent overflow when calculating annotation buckets size, from Cody Schafer

 * Set breakpoint events sample period to 1, just like trace events, from Jovi Zhang

 * Fix strerror_r usage, from Kirill Shutemov

 * Fix duplicate function declaration problems with bison 2.6, from Kirill Shutemov

 * Add DSO caching facility (and perf test entry) to speed up binary file
   reading, will be used by the DWARF unwind code, from Jiri Olsa

 * Fix trace event storms by setting PERF_SAMPLE_PERIOD, from Frederic Weisbecker

 * perf kvm fixes from David Ahern
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

A large enough symbol size causes an overflow in the size parameter to
the histogram allocation, leading to a segfault in
symbol__inc_addr_samples later on when this histogram is accessed.

In the case of being called via perf-report, this returns back and
gracefully ignores the sample, eventually ignoring the chained return
value of perf_session_deliver_event in flush_sample_queue.
Signed-off-by: NCody Schafer <cody@linux.vnet.ibm.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1342753525-4521-1-git-send-email-cody@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The TRACEEVENT-CFLAGS file is used to detect any change on compiler
flags. Just ignore it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1341559297-25725-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cross compiling perf requires setting ARCH and CROSS_COMPILE variables,
but libtraceevent couldn't detect the changes so it ends up believing no
recompiling is required. Thus the linker failed like:

     LINK perf
 ../lib/traceevent//libtraceevent.a: member ../lib/traceevent//libtraceevent.a(event-parse.o) in archive is not an object
 collect2: ld returned 1 exit status
 make: *** [perf] Error 1

This patch fixes this by adding TRACEEVENT-CFLAGS file like
PERF-CFLAGS to track those changes.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1341559297-25725-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Bison 2.6 started to generate parse_events_parse() declaration in header. In
this case we have redundant redeclaration:

util/parse-events.c:29:5: error: redundant redeclaration of ‘parse_events_parse’ [-Werror=redundant-decls]
In file included from util/parse-events.c:14:0:
util/parse-events-bison.h:99:5: note: previous declaration of ‘parse_events_parse’ was here
cc1: all warnings being treated as errors

Let's disable -Wredundant-decls for util/parse-events.c since it includes
header we can't control.
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120723210407.GA25186@shutemov.nameSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Perf uses GNU-specific version of strerror_r(). The GNU-specific strerror_r()
returns a pointer to a string containing the error message.  This may be either
a pointer to a string that the function stores in buf, or a pointer to some
(immutable) static string (in which case buf is unused).

In glibc-2.16 GNU version was marked with attribute warn_unused_result.  It
triggers few warnings in perf:

util/target.c: In function ‘perf_target__strerror’:
util/target.c:114:13: error: ignoring return value of ‘strerror_r’, declared with attribute warn_unused_result [-Werror=unused-result]
ui/browsers/hists.c: In function ‘hist_browser__dump’:
ui/browsers/hists.c:981:13: error: ignoring return value of ‘strerror_r’, declared with attribute warn_unused_result [-Werror=unused-result]

They are bugs.

Let's fix strerror_r() usage.
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Acked-by: NUlrich Drepper <drepper@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/20120723210654.GA25248@shutemov.name
[ committer note: s/assert/BUG_ON/g ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There have one problem about hw_breakpoint perf event, as watched, the
events reported to userspace is not correctly, sometime one trigger
bp_event report several events, sometime bp_event cannot go through to
user.

The root cause is attr->freq is 1 passed to kernel defaultly in bp
events, this make kernel calculate event period not as expect, make
sample period to 1 will change attr->freq to 0, to fix this problem.

This patch is similar with commit f92128 about tracepoint events:
    perf: Make the trace events sample period default to 1
Signed-off-by: NJovi Zhang <bookjovi@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/CACV3sbLF8taiCq_VYW-sgRJyupeMzg58C7ZXfMe3xZUiH_Mx6w@mail.gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding automated test for DSO data reading. Testing raw/cached reads
from different file/cache locations.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1342959280-5361-18-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding dso data caching so we don't need to open/read/close, each time
we want dso data.

The DSO data caching affects following functions:
  dso__data_read_offset
  dso__data_read_addr

Each DSO read tries to find the data (based on offset) inside the cache.
If it's not present it fills the cache from file, and returns the data.
If it is present, data are returned with no file read.

Each data read is cached by reading cache page sized/aligned amount of
DSO data. The cache page size is hardcoded to 4096.  The cache is using
RB tree with file offset as a sort key.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1342959280-5361-17-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>