Online defrag operations for ext4 are hard coded to use the page cache.
See ext4_ioctl() -> ext4_move_extents() -> move_extent_per_page()

When combined with DAX I/O, which circumvents the page cache, this can
result in data corruption.  This was observed with xfstests ext4/307 and
ext4/308.

Fix this by only allowing online defrag for non-DAX files.
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When S_DAX is set on an inode we assume that if there are pages attached
to the mapping (mapping->nrpages != 0), those pages are clean zero pages
that were used to service reads from holes.  Any dirty data associated
with the inode should be in the form of DAX exceptional entries
(mapping->nrexceptional) that is written back via
dax_writeback_mapping_range().

With the current code, though, this isn't always true.  For example,
ext2 and ext4 directory inodes can have S_DAX set, but have their dirty
data stored as dirty page cache entries.  For these types of inodes,
having S_DAX set doesn't really make sense since their I/O doesn't
actually happen through the DAX code path.

Instead, only allow S_DAX to be set for regular inodes for ext2 and
ext4.  This allows us to have strict DAX vs non-DAX paths in the
writeback code.
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The recent *sync enabling discovered that we are inserting into the
block_device pagecache counter to the expectations of the dirty data
tracking for dax mappings.  This can lead to data corruption.

We want to support DAX for block devices eventually, but it requires
wider changes to properly manage the pagecache.

   dump_stack+0x85/0xc2
   dax_writeback_mapping_range+0x60/0xe0
   blkdev_writepages+0x3f/0x50
   do_writepages+0x21/0x30
   __filemap_fdatawrite_range+0xc6/0x100
   filemap_write_and_wait+0x4a/0xa0
   set_blocksize+0x70/0xd0
   sb_set_blocksize+0x1d/0x50
   ext4_fill_super+0x75b/0x3360
   mount_bdev+0x180/0x1b0
   ext4_mount+0x15/0x20
   mount_fs+0x38/0x170

Mark the support broken so its disabled by default, but otherwise still
available for testing.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reported-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When doing append direct io cleanup, if deleting inode fails, it goes
out without unlocking inode, which will cause the inode deadlock.

This issue was introduced by commit cf1776a9 ("ocfs2: fix a tiny
race when truncate dio orohaned entry").
Signed-off-by: NGuozhonghua <guozhonghua@h3c.com>
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: NGang He <ghe@suse.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>	[4.2+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace calls to get_random_int() followed by a cast to (unsigned long)
with calls to get_random_long().  Also address shifting bug which, in
case of x86 removed entropy mask for mmap_rnd_bits values > 31 bits.
Signed-off-by: NDaniel Cashman <dcashman@android.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nick Kralevich <nnk@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit d07e2259 ("mm: mmap: add new /proc tunable for mmap_base
ASLR") added the ability to choose from a range of values to use for
entropy count in generating the random offset to the mmap_base address.

The maximum value on this range was set to 32 bits for 64-bit x86
systems, but this value could be increased further, requiring more than
the 32 bits of randomness provided by get_random_int(), as is already
possible for arm64.  Add a new function: get_random_long() which more
naturally fits with the mmap usage of get_random_int() but operates
exactly the same as get_random_int().

Also, fix the shifting constant in mmap_rnd() to be an unsigned long so
that values greater than 31 bits generate an appropriate mask without
overflow.  This is especially important on x86, as its shift instruction
uses a 5-bit mask for the shift operand, which meant that any value for
mmap_rnd_bits over 31 acts as a no-op and effectively disables mmap_base
randomization.

Finally, replace calls to get_random_int() with get_random_long() where
appropriate.

This patch (of 2):

Add get_random_long().
Signed-off-by: NDaniel Cashman <dcashman@android.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nick Kralevich <nnk@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 4167e9b2 ("mm: remove GFP_THISNODE") removed the GFP_THISNODE
flag combination due to confusing semantics.  It noted that
alloc_misplaced_dst_page() was one such user after changes made by
commit e97ca8e5 ("mm: fix GFP_THISNODE callers and clarify").

Unfortunately when GFP_THISNODE was removed, users of
alloc_misplaced_dst_page() started waking kswapd and entering direct
reclaim because the wrong GFP flags are cleared.  The consequence is
that workloads that used to fit into memory now get reclaimed which is
addressed by this patch.

The problem can be demonstrated with "mutilate" that exercises memcached
which is software dedicated to memory object caching.  The configuration
uses 80% of memory and is run 3 times for varying numbers of clients.
The results on a 4-socket NUMA box are

mutilate
                            4.4.0                 4.4.0
                          vanilla           numaswap-v1
Hmean    1      8394.71 (  0.00%)     8395.32 (  0.01%)
Hmean    4     30024.62 (  0.00%)    34513.54 ( 14.95%)
Hmean    7     32821.08 (  0.00%)    70542.96 (114.93%)
Hmean    12    55229.67 (  0.00%)    93866.34 ( 69.96%)
Hmean    21    39438.96 (  0.00%)    85749.21 (117.42%)
Hmean    30    37796.10 (  0.00%)    50231.49 ( 32.90%)
Hmean    47    18070.91 (  0.00%)    38530.13 (113.22%)

The metric is queries/second with the more the better.  The results are
way outside of the noise and the reason for the improvement is obvious
from some of the vmstats

                                 4.4.0       4.4.0
                               vanillanumaswap-v1r1
Minor Faults                1929399272  2146148218
Major Faults                  19746529        3567
Swap Ins                      57307366        9913
Swap Outs                     50623229       17094
Allocation stalls                35909         443
DMA allocs                           0           0
DMA32 allocs                  72976349   170567396
Normal allocs               5306640898  5310651252
Movable allocs                       0           0
Direct pages scanned         404130893      799577
Kswapd pages scanned         160230174           0
Kswapd pages reclaimed        55928786           0
Direct pages reclaimed         1843936       41921
Page writes file                  2391           0
Page writes anon              50623229       17094

The vanilla kernel is swapping like crazy with large amounts of direct
reclaim and kswapd activity.  The figures are aggregate but it's known
that the bad activity is throughout the entire test.

Note that simple streaming anon/file memory consumers also see this
problem but it's not as obvious.  In those cases, kswapd is awake when
it should not be.

As there are at least two reclaim-related bugs out there, it's worth
spelling out the user-visible impact.  This patch only addresses bugs
related to excessive reclaim on NUMA hardware when the working set is
larger than a NUMA node.  There is a bug related to high kswapd CPU
usage but the reports are against laptops and other UMA hardware and is
not addressed by this patch.
Signed-off-by: NMel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>	[4.1+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

pmd_trans_unstable()/pmd_none_or_trans_huge_or_clear_bad() were
introduced to locklessy (but atomically) detect when a pmd is a regular
(stable) pmd or when the pmd is unstable and can infinitely transition
from pmd_none() and pmd_trans_huge() from under us, while only holding
the mmap_sem for reading (for writing not).

While holding the mmap_sem only for reading, MADV_DONTNEED can run from
under us and so before we can assume the pmd to be a regular stable pmd
we need to compare it against pmd_none() and pmd_trans_huge() in an
atomic way, with pmd_trans_unstable().  The old pmd_trans_huge() left a
tiny window for a race.

Useful applications are unlikely to notice the difference as doing
MADV_DONTNEED concurrently with a page fault would lead to undefined
behavior.

[akpm@linux-foundation.org: tidy up comment grammar/layout]
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reported-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull Ceph fixes from Sage Weil:
 "There are two small messenger bug fixes and a log spam regression fix"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: don't spam dmesg with stray reply warnings
  libceph: use the right footer size when skipping a message
  libceph: don't bail early from try_read() when skipping a message

Pull sound fixes from Takashi Iwai:
 "Things got calmed down for rc6, as it seems, and we have only a few
  HD-audio fixes at this time: a fix for Skylake codec probe errors, a
  fix for missing interrupt handling, and a few Dell and HP quirks"

* tag 'sound-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Loop interrupt handling until really cleared
  ALSA: hda - Fix headset support and noise on HP EliteBook 755 G2
  ALSA: hda - Fixup speaker pass-through control for nid 0x14 on ALC225
  ALSA: hda - Fixing background noise on Dell Inspiron 3162
  ALSA: hda - Apply clock gate workaround to Skylake, too

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are two reverts of recent PCI-related ACPI core changes (one of
  which caused some systems to crash on boot and the other was a cleanup
  on top of it) and a devfreq fix for Tegra.

  Specifics:

   - Revert an ACPI core change related to IRQ management in PCI that
     introduced code relying on the use of kmalloc() which turned out to
     also run during early init when that's not available yet and caused
     some systems to crash on boot for this reason along with a cleanup
     on top of it (Rafael Wysocki).

   - Prevent devfreq from flooding the kernel log with useless messages
     on Tegra (which started to happen after some recent changes in the
     devfreq core) by fixing the driver to follow the documentation and
     the core's expectations in its ->target callback (Tomeu Vizoso)"

* tag 'pm+acpi-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI, PCI, irq: remove interrupt count restriction"
  Revert "ACPI / PCI: Simplify acpi_penalize_isa_irq()"
  PM / devfreq: tegra: Set freq in rate callback

* pm-devfreq:
  PM / devfreq: tegra: Set freq in rate callback

* acpi-pci:
  Revert "ACPI, PCI, irq: remove interrupt count restriction"
  Revert "ACPI / PCI: Simplify acpi_penalize_isa_irq()"

Currently the interrupt handler of HD-audio driver assumes that no irq
update is needed while processing the irq.  But in reality, it has
been confirmed that the HW irq is issued even during the irq
handling.  Since we clear the irq status at the beginning, process the
interrupt, then exits from the handler, the lately issued interrupt is
left untouched without being properly processed.

This patch changes the interrupt handler code to loop over the
check-and-process.  The handler tries repeatedly as long as the IRQ
status are turned on, and either stream or CORB/RIRB is handled.

For checking the stream handling, snd_hdac_bus_handle_stream_irq()
returns a value indicating the stream indices bits.  Other than that,
the change is only in the irq handler itself.
Reported-by: NLibin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Merge tag 'trace-fixes-v4.5-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "Another small bug reported to me by Chunyu Hu.

  When perf added a "reg" function to the function tracing event (not a
  tracepoint), it caused that event to be displayed as a tracepoint and
  could cause errors in tracepoint handling.  That was solved by adding
  a flag to ignore ftrace non-tracepoint events.  But that flag was
  missed when displaying events in available_events, which should only
  contain tracepoint events.

  This broke a documented way to enable all events with:

      cat available_events > set_event

  As the function non-tracepoint event would cause that to error out.
  The commit here fixes that by having the available_events file not
  list events that have the ignore flag set"

* tag 'trace-fixes-v4.5-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix showing function event in available_events

Pull KVM fixes from Paolo Bonzini:
 "KVM/ARM fixes:
   - Fix per-vcpu vgic bitmap allocation
   - Do not give copy random memory on MMIO read
   - Fix GICv3 APR register restore order

  KVM/x86 fixes:
   - Fix ubsan warning
   - Fix hardware breakpoints in a guest vs. preempt notifiers
   - Fix Hurd

  Generic:
   - use __GFP_NOWARN together with GFP_NOWAIT"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: MMU: fix ubsan index-out-of-range warning
  arm64: KVM: vgic-v3: Restore ICH_APR0Rn_EL2 before ICH_APR1Rn_EL2
  KVM: async_pf: do not warn on page allocation failures
  KVM: x86: fix conversion of addresses to linear in 32-bit protected mode
  KVM: x86: fix missed hardware breakpoints
  arm/arm64: KVM: Feed initialized memory to MMIO accesses
  KVM: arm/arm64: vgic: Ensure bitmaps are long enough

Merge tag 'renesas-sh-drivers-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

Pull SuperH driver fix from Simon Horman:
 "Restore legacy clock domain on SuperH platforms"

* tag 'renesas-sh-drivers-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  drivers: sh: Restore legacy clock domain on SuperH platforms

Pull powerpc fixes from Michael Ellerman:
 - eeh: Fix partial hotplug criterion from Gavin Shan
 - mm: Clear the invalid slot information correctly from Aneesh Kumar K.V

* tag 'powerpc-4.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm/hash: Clear the invalid slot information correctly
  powerpc/eeh: Fix partial hotplug criterion

Pull s390 bugfixes from Martin Schwidefsky:
 "Two critical bug fixes for the signal handling"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/fpu: signals vs. floating point control register
  s390/compat: correct restore of high gprs on signal return

Pull nfsd bugfix from Bruce Fields:
 "One fix for a bug that could cause a NULL write past the end of a
  buffer in case of unusually long writes to some system interfaces used
  by mountd and other nfs support utilities"

* tag 'nfsd-4.5-1' of git://linux-nfs.org/~bfields/linux:
  sunrpc/cache: fix off-by-one in qword_get()

Pull drm fixes from Dave Airlie:
 "This is a bit larger than Id like, but I asked the Intel guys to pull
  in some Skylake fixes in the possibly vain hope that Skylake might be
  more functional now that I'm seeing production hardware shipping.

  For i915, it's mostly the same patch in a few places, making sure the
  hw doesn't turn off when we are programming it.

  Apart from that are two nouveau fixes, one for a module defer bug, and
  one for using nouveau on new Lenovo P50 models.

  Then there are a bunch of AMDGPU fixes, one is a fix for v4.4 vblank
  regressions, and some PM fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (26 commits)
  drm/nouveau/disp/dp: ensure sink is powered up before attempting link training
  drm/nouveau: platform: Fix deferred probe
  drm/amdgpu: disable direct VM updates when vm_debug is set
  amdgpu: fix NULL pointer dereference at tonga_check_states_equal
  drm/i915/gen9: Verify and enforce dc6 state writes
  drm/i915/gen9: Check for DC state mismatch
  drm/radeon/pm: adjust display configuration after powerstate
  drm/amdgpu/pm: adjust display configuration after powerstate
  drm/amdgpu/pm: add some checks for PX
  drm/amdgpu: fix locking in force performance level
  drm/amdgpu/gfx8: fix priv reg interrupt enable
  drm/i915/skl: Ensure HW is powered during DDB HW state readout
  drm/i915/lvds: Ensure the HW is powered during HW state readout
  drm/i915/hdmi: Ensure the HW is powered during HW state readout
  drm/i915/dsi: Ensure the HW is powered during HW state readout
  drm/i915/dp: Ensure the HW is powered during HW state readout
  drm/i915: Ensure the HW is powered when accessing the CRC HW block
  drm/i915/ddi: Ensure the HW is powered during HW state readout
  drm/i915/crt: Ensure the HW is powered during HW state readout
  drm/i915: Ensure the HW is powered during HW access in assert_pipe
  ...

Pull libnvdimm fixes from Dan Williams:

 - Two fixes for compatibility with the ACPI 6.1 specification.

   Without these fixes multi-interface DIMMs will fail to be probed, and
   address range scrub commands to find memory errors will give results
   that the kernel will mis-interpret.  For multi-interface DIMMs Linux
   will accept either the original 6.0 implementation or 6.1.

   For address range scrub we'll only support 6.1 since ACPI formalized
   this DSM differently than the original example [1] implemented in
   v4.2.  The expectation is that production systems will only ever ship
   the ACPI 6.1 address range scrub command definition.

 - The wider async address range scrub work targeting 4.6 discovered
   that the original synchronous implementation in 4.5 is not sizing its
   return buffer correctly.

 - Arnd caught that my recent fix to the size of the pfn_t flags missed
   updating the flags variable used in the pmem driver.

 - Toshi found that we mishandle the memremap() return value in
   devm_memremap().

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nvdimm: use 'u64' for pfn flags
  devm_memremap: Fix error value when memremap failed
  nfit: update address range scrub commands to the acpi 6.1 format
  libnvdimm, tools/testing/nvdimm: fix 'ars_status' output buffer sizing
  nfit: fix multi-interface dimm handling, acpi6.1 compatibility

Pull power supply fixes from Sebastian Reichel:
 "Add a regression fix for changed sysfs path of bq27xxx_battery and
  update MAINTAINERS file"

* tag 'for-v4.5-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: bq27xxx_battery: Restore device name
  MAINTAINERS: update bq27xxx driver

HP EliteBook 755 G2 with ALC3228 (ALC280) codec [103c:221c] requires
the known fixup (ALC269_FIXUP_HEADSET_MIC) for making the headset mic
working.  Also, it suffers from the loopback noise problem, so we
should disable aamix path as well.
Reported-by: NDerick Eddington <derick.eddington@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On one of the machines we enable, we found that the actual speaker volume
did not always correspond to the volume set in alsamixer. This patch
fixes that problem.

This patch was orginally written by Kailang @ Realtek, I've rebased it
to fit sound git master.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1549660Co-Authored-By: NKailang <kailang@realtek.com>
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Merge tag 'kvm-arm-for-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/ARM fixes for 4.5-rc6

- Fix per-vcpu vgic bitmap allocation
- Do not give copy random memory on MMIO read
- Fix GICv3 APR register restore order

Ubsan reports the following warning due to a typo in
update_accessed_dirty_bits template, the patch fixes
the typo:

[  168.791851] ================================================================================
[  168.791862] UBSAN: Undefined behaviour in arch/x86/kvm/paging_tmpl.h:252:15
[  168.791866] index 4 is out of range for type 'u64 [4]'
[  168.791871] CPU: 0 PID: 2950 Comm: qemu-system-x86 Tainted: G           O L  4.5.0-rc5-next-20160222 #7
[  168.791873] Hardware name: LENOVO 23205NG/23205NG, BIOS G2ET95WW (2.55 ) 07/09/2013
[  168.791876]  0000000000000000 ffff8801cfcaf208 ffffffff81c9f780 0000000041b58ab3
[  168.791882]  ffffffff82eb2cc1 ffffffff81c9f6b4 ffff8801cfcaf230 ffff8801cfcaf1e0
[  168.791886]  0000000000000004 0000000000000001 0000000000000000 ffffffffa1981600
[  168.791891] Call Trace:
[  168.791899]  [<ffffffff81c9f780>] dump_stack+0xcc/0x12c
[  168.791904]  [<ffffffff81c9f6b4>] ? _atomic_dec_and_lock+0xc4/0xc4
[  168.791910]  [<ffffffff81da9e81>] ubsan_epilogue+0xd/0x8a
[  168.791914]  [<ffffffff81daafa2>] __ubsan_handle_out_of_bounds+0x15c/0x1a3
[  168.791918]  [<ffffffff81daae46>] ? __ubsan_handle_shift_out_of_bounds+0x2bd/0x2bd
[  168.791922]  [<ffffffff811287ef>] ? get_user_pages_fast+0x2bf/0x360
[  168.791954]  [<ffffffffa1794050>] ? kvm_largepages_enabled+0x30/0x30 [kvm]
[  168.791958]  [<ffffffff81128530>] ? __get_user_pages_fast+0x360/0x360
[  168.791987]  [<ffffffffa181b818>] paging64_walk_addr_generic+0x1b28/0x2600 [kvm]
[  168.792014]  [<ffffffffa1819cf0>] ? init_kvm_mmu+0x1100/0x1100 [kvm]
[  168.792019]  [<ffffffff8129e350>] ? debug_check_no_locks_freed+0x350/0x350
[  168.792044]  [<ffffffffa1819cf0>] ? init_kvm_mmu+0x1100/0x1100 [kvm]
[  168.792076]  [<ffffffffa181c36d>] paging64_gva_to_gpa+0x7d/0x110 [kvm]
[  168.792121]  [<ffffffffa181c2f0>] ? paging64_walk_addr_generic+0x2600/0x2600 [kvm]
[  168.792130]  [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90
[  168.792178]  [<ffffffffa17d9a4a>] emulator_read_write_onepage+0x27a/0x1150 [kvm]
[  168.792208]  [<ffffffffa1794d44>] ? __kvm_read_guest_page+0x54/0x70 [kvm]
[  168.792234]  [<ffffffffa17d97d0>] ? kvm_task_switch+0x160/0x160 [kvm]
[  168.792238]  [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90
[  168.792263]  [<ffffffffa17daa07>] emulator_read_write+0xe7/0x6d0 [kvm]
[  168.792290]  [<ffffffffa183b620>] ? em_cr_write+0x230/0x230 [kvm]
[  168.792314]  [<ffffffffa17db005>] emulator_write_emulated+0x15/0x20 [kvm]
[  168.792340]  [<ffffffffa18465f8>] segmented_write+0xf8/0x130 [kvm]
[  168.792367]  [<ffffffffa1846500>] ? em_lgdt+0x20/0x20 [kvm]
[  168.792374]  [<ffffffffa14db512>] ? vmx_read_guest_seg_ar+0x42/0x1e0 [kvm_intel]
[  168.792400]  [<ffffffffa1846d82>] writeback+0x3f2/0x700 [kvm]
[  168.792424]  [<ffffffffa1846990>] ? em_sidt+0xa0/0xa0 [kvm]
[  168.792449]  [<ffffffffa185554d>] ? x86_decode_insn+0x1b3d/0x4f70 [kvm]
[  168.792474]  [<ffffffffa1859032>] x86_emulate_insn+0x572/0x3010 [kvm]
[  168.792499]  [<ffffffffa17e71dd>] x86_emulate_instruction+0x3bd/0x2110 [kvm]
[  168.792524]  [<ffffffffa17e6e20>] ? reexecute_instruction.part.110+0x2e0/0x2e0 [kvm]
[  168.792532]  [<ffffffffa14e9a81>] handle_ept_misconfig+0x61/0x460 [kvm_intel]
[  168.792539]  [<ffffffffa14e9a20>] ? handle_pause+0x450/0x450 [kvm_intel]
[  168.792546]  [<ffffffffa15130ea>] vmx_handle_exit+0xd6a/0x1ad0 [kvm_intel]
[  168.792572]  [<ffffffffa17f6a6c>] ? kvm_arch_vcpu_ioctl_run+0xbdc/0x6090 [kvm]
[  168.792597]  [<ffffffffa17f6bcd>] kvm_arch_vcpu_ioctl_run+0xd3d/0x6090 [kvm]
[  168.792621]  [<ffffffffa17f6a6c>] ? kvm_arch_vcpu_ioctl_run+0xbdc/0x6090 [kvm]
[  168.792627]  [<ffffffff8293b530>] ? __ww_mutex_lock_interruptible+0x1630/0x1630
[  168.792651]  [<ffffffffa17f5e90>] ? kvm_arch_vcpu_runnable+0x4f0/0x4f0 [kvm]
[  168.792656]  [<ffffffff811eeb30>] ? preempt_notifier_unregister+0x190/0x190
[  168.792681]  [<ffffffffa17e0447>] ? kvm_arch_vcpu_load+0x127/0x650 [kvm]
[  168.792704]  [<ffffffffa178e9a3>] kvm_vcpu_ioctl+0x553/0xda0 [kvm]
[  168.792727]  [<ffffffffa178e450>] ? vcpu_put+0x40/0x40 [kvm]
[  168.792732]  [<ffffffff8129e350>] ? debug_check_no_locks_freed+0x350/0x350
[  168.792735]  [<ffffffff82946087>] ? _raw_spin_unlock+0x27/0x40
[  168.792740]  [<ffffffff8163a943>] ? handle_mm_fault+0x1673/0x2e40
[  168.792744]  [<ffffffff8129daa8>] ? trace_hardirqs_on_caller+0x478/0x6c0
[  168.792747]  [<ffffffff8129dcfd>] ? trace_hardirqs_on+0xd/0x10
[  168.792751]  [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90
[  168.792756]  [<ffffffff81725a80>] do_vfs_ioctl+0x1b0/0x12b0
[  168.792759]  [<ffffffff817258d0>] ? ioctl_preallocate+0x210/0x210
[  168.792763]  [<ffffffff8174aef3>] ? __fget+0x273/0x4a0
[  168.792766]  [<ffffffff8174acd0>] ? __fget+0x50/0x4a0
[  168.792770]  [<ffffffff8174b1f6>] ? __fget_light+0x96/0x2b0
[  168.792773]  [<ffffffff81726bf9>] SyS_ioctl+0x79/0x90
[  168.792777]  [<ffffffff82946880>] entry_SYSCALL_64_fastpath+0x23/0xc1
[  168.792780] ================================================================================
Signed-off-by: NMike Krinkin <krinkin.m.u@gmail.com>
Reviewed-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

After login to the desktop on Dell Inspiron 3162,
there's a very loud background noise comes from the builtin speaker.
The noise does not go away even if the speaker is muted.

The noise disappears after using the aamix fixup.

Codec: Realtek ALC3234
Address: 0
AFG Function Id: 0x1 (unsol 1)
    Vendor Id: 0x10ec0255
    Subsystem Id: 0x10280725
    Revision Id: 0x100002
    No Modem Function Group found

BugLink: http://bugs.launchpad.net/bugs/1549620Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

single for for eDP panel issues on Lenovo P50
* 'linux-4.5' of git://github.com/skeggsb/linux:
  drm/nouveau/disp/dp: ensure sink is powered up before attempting link training

This can happen under some annoying circumstances, and is a quick fix
until more substantial changes can be made.

Fixed eDP mode changes on (at least) the Lenovo P50.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

The error cleanup paths aren't quite correct and will crash upon
deferred probe.

Cc: stable@vger.kernel.org # v4.3+
Reviewed-by: NBen Skeggs <bskeggs@redhat.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

CONFIG_ARCH_SHMOBILE is not only enabled for Renesas ARM platforms
(which are DT based and multi-platform), but also on a select set of
Renesas SuperH platforms (SH7722/SH7723/SH7724/SH7343/SH7366). Hence
since commit 0ba58de2 ("drivers: sh: Get rid of
CONFIG_ARCH_SHMOBILE_MULTI"), the legacy clock domain is no longer
installed on these SuperH platforms, and module clocks may not be
enabled when needed, leading to driver failures.

To fix this, add an additional check for CONFIG_OF.

Fixes: 0ba58de2 ("drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI").
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This is a bit large, but it really helps Skylake bugs we are seeing
on a number of laptops.

Most of the commits are quite similar, ensuring the display power
doesn't vanish under us during hardware access. Also do note that it's
not just Skylake that's affected.

* tag 'drm-intel-fixes-2016-02-22' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/gen9: Verify and enforce dc6 state writes
  drm/i915/gen9: Check for DC state mismatch
  drm/i915/skl: Ensure HW is powered during DDB HW state readout
  drm/i915/lvds: Ensure the HW is powered during HW state readout
  drm/i915/hdmi: Ensure the HW is powered during HW state readout
  drm/i915/dsi: Ensure the HW is powered during HW state readout
  drm/i915/dp: Ensure the HW is powered during HW state readout
  drm/i915: Ensure the HW is powered when accessing the CRC HW block
  drm/i915/ddi: Ensure the HW is powered during HW state readout
  drm/i915/crt: Ensure the HW is powered during HW state readout
  drm/i915: Ensure the HW is powered during HW access in assert_pipe
  drm/i915: Ensure the HW is powered when disabling VGA
  drm/i915/ibx: Ensure the HW is powered during PLL HW readout
  drm/i915: Ensure the HW is powered during display pipe HW readout
  drm/i915: Add helper to get a display power ref if it was already enabled

A few radeon and amdgpu fixes for 4.5.  A few further fixes for the vblank
regressions in 4.4 and a couple of other minor fixes.

* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: disable direct VM updates when vm_debug is set
  amdgpu: fix NULL pointer dereference at tonga_check_states_equal
  drm/radeon/pm: adjust display configuration after powerstate
  drm/amdgpu/pm: adjust display configuration after powerstate
  drm/amdgpu/pm: add some checks for PX
  drm/amdgpu: fix locking in force performance level
  drm/amdgpu/gfx8: fix priv reg interrupt enable
  drm/amdgpu: Don't hang in amdgpu_flip_work_func on disabled crtc.
  drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2)

Pull ARC fixes from Vineet Gupta:
 - Fix for csd deadlock due to missing self IPI
 - Accompanying IPI cleanups / optimization
 - Brown paper bag bug in one of the cleanups above
 - Boot reporting updates for new hardware features
 - Don't force DEVTMPFS if INITRAMFS

* tag 'arc-4.5-rc6-fixes-upd' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  arc: SMP: CONFIG_ARC_IPI_DBG cleanup
  ARC: SMP: No need for CONFIG_ARC_IPI_DBG
  ARCv2: Elide sending new cross core intr if receiver didn't ack prev
  ARCv2: SMP: Push IPI_IRQ into IPI provider
  ARC: [intc-compact] Remove IPI setup from ARCompact port
  ARCv2: SMP: Emulate IPI to self using software triggered interrupt
  arc: get rid of DEVTMPFS dependency on INITRAMFS_SOURCE
  ARCv2: boot report CCMs (Closely Coupled Memories)
  ARCv2: boot print Low Latency Memory
  ARC: Assume multiplier is always present

Pull vfs fixes from Al Viro:
 "Assorted fixes - xattr one from this cycle, the rest - stable fodder"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs/pnode.c: treat zero mnt_group_id-s as unequal
  affs_do_readpage_ofs(): just use kmap_atomic() around memcpy()
  xattr handlers: plug a lock leak in simple_xattr_list
  fs: allow no_seek_end_llseek to actually seek

Commit d15f9d69 ("libceph: check data_len in ->alloc_msg()")
mistakenly bumped the log level on the "tid %llu unknown, skipping"
message.  Turn it back into a dout() - stray replies are perfectly
normal when OSDs flap, crash, get killed for testing purposes, etc.

Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

ceph_msg_footer is 21 bytes long, while ceph_msg_footer_old is only 13.
Don't skip too much when CEPH_FEATURE_MSG_AUTH isn't negotiated.

Cc: stable@vger.kernel.org # 3.19+
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

The contract between try_read() and try_write() is that when called
each processes as much data as possible.  When instructed by osd_client
to skip a message, try_read() is violating this contract by returning
after receiving and discarding a single message instead of checking for
more.  try_write() then gets a chance to write out more requests,
generating more replies/skips for try_read() to handle, forcing the
messenger into a starvation loop.

Cc: stable@vger.kernel.org # 3.10+
Reported-by: NVarada Kari <Varada.Kari@sandisk.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Tested-by: NVarada Kari <Varada.Kari@sandisk.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Sebastian Ott and Gerald Schaefer reported random crashes on s390.
It was bisected to my THP refcounting patchset.

The problem is that pmdp_invalidated() called with wrong virtual
address. It got offset up by HPAGE_PMD_SIZE by loop over ptes.

The solution is to introduce new variable to be used in loop and don't
touch 'haddr'.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-and-tested-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Reported-and-tested-by Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>