* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
  serial8250: ratelimit "too much work" error
  serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
  serial: abstraction for 8250 legacy ports
  serial/imx: check that the buffer is non-empty before sending it out
  serial: mfd: add more baud rates support
  jsm: Remove the uart port on errors
  Alchemy: Add UART PM methods.
  8250: allow platforms to override PM hook.
  altera_uart: Don't use plain integer as NULL pointer
  altera_uart: Fix missing prototype for registering an early console
  altera_uart: Fixup type usage of port flags
  altera_uart: Make it possible to use Altera UART and 8250 ports together
  altera_uart: Add support for different address strides
  altera_uart: Add support for getting mapbase and IRQ from resources
  altera_uart: Add support for polling mode (IRQ-less)
  serial: Factor out uart_poll_timeout() from 8250 driver
  serial: mark the 8250 driver as maintained
  serial: 8250: Don't delay after transmitter is ready.
  tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
  vcs: invoke the vt update callback when /dev/vcs* is written to
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (31 commits)
  driver core: Display error codes when class suspend fails
  Driver core: Add section count to memory_block struct
  Driver core: Add mutex for adding/removing memory blocks
  Driver core: Move find_memory_block routine
  hpilo: Despecificate driver from iLO generation
  driver core: Convert link_mem_sections to use find_memory_block_hinted.
  driver core: Introduce find_memory_block_hinted which utilizes kset_find_obj_hinted.
  kobject: Introduce kset_find_obj_hinted.
  driver core: fix build for CONFIG_BLOCK not enabled
  driver-core: base: change to new flag variable
  sysfs: only access bin file vm_ops with the active lock
  sysfs: Fail bin file mmap if vma close is implemented.
  FW_LOADER: fix kconfig dependency warning on HOTPLUG
  uio: Statically allocate uio_class and use class .dev_attrs.
  uio: Support 2^MINOR_BITS minors
  uio: Cleanup irq handling.
  uio: Don't clear driver data
  uio: Fix lack of locking in init_uio_class
  SYSFS: Allow boot time switching between deprecated and modern sysfs layout
  driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices
  ...

Commit dd3932ed ("block: remove BLKDEV_IFL_WAIT") had removed the
flag argument to blkdev_issue_flush(), but the ocfs2 merge brought in a
new one.  It didn't cause a merge conflict, so the merges silently
worked out fine, but the result didn't actually compile.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (56 commits)
  [CIFS] move close processing  from cifs_close to cifsFileInfo_put
  cifs: convert cifs_tcp_ses_lock from a rwlock to a spinlock
  cifs: cancel_delayed_work() + flush_scheduled_work() -> cancel_delayed_work_sync()
  Clean up two declarations of blob_len
  cifs: move cifsFileInfo_put to file.c
  cifs: convert GlobalSMBSeslock from a rwlock to regular spinlock
  [CIFS] Fix minor checkpatch warning and update cifs version
  cifs: move cifs_new_fileinfo to file.c
  cifs: eliminate pfile pointer from cifsFileInfo
  cifs: cifs_write argument change and cleanup
  cifs: clean up cifs_reopen_file
  cifs: eliminate the inode argument from cifs_new_fileinfo
  cifs: eliminate oflags option from cifs_new_fileinfo
  cifs: fix flags handling in cifs_posix_open
  cifs: eliminate cifs_posix_open_inode_helper
  cifs: handle FindFirst failure gracefully
  NTLM authentication and signing - Calculate auth response per smb session
  cifs: don't use vfsmount to pin superblock for oplock breaks
  cifs: keep dentry reference in cifsFileInfo instead of inode reference
  cifs: on multiuser mount, set ownership to current_fsuid/current_fsgid (try #7)
  ...

Fix up trivial conflict in fs/cifs/cifsfs.c due to added/removed header files

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (84 commits)
  [SCSI] be2iscsi: SGE Len == 64K
  [SCSI] be2iscsi: Remove premature free of cid
  [SCSI] be2iscsi: More time for FW
  [SCSI] libsas: fix bug for vacant phy
  [SCSI] sd: Fix overflow with big physical blocks
  [SCSI] st: add MTWEOFI to write filemarks without flushing drive buffer
  [SCSI] libsas: Don't issue commands to devices that have been hot-removed
  [SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive
  [SCSI] lpfc 8.3.17: Update lpfc driver version to 8.3.17
  [SCSI] lpfc 8.3.17: Replace function reset methodology
  [SCSI] lpfc 8.3.17: SCSI fixes
  [SCSI] lpfc 8.3.17: BSG fixes
  [SCSI] lpfc 8.3.17: SLI Additions and Fixes
  [SCSI] lpfc 8.3.17: Code Cleanup and Locking fixes
  [SCSI] zfcp: Remove scsi_cmnd->serial_number from debug traces
  [SCSI] ipr: fix array error logging
  [SCSI] aha152x: enable PCMCIA on 64bit
  [SCSI] scsi_dh_alua: Handle all states correctly
  [SCSI] cxgb4i: connection and ddp setting update
  [SCSI] cxgb3i: fixed connection over vlan
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Add missing I/O macros {in,out}{w,l}_p() for !CONFIG_ISA
  m68k: Remove big kernel lock in cache flush code
  m68k: __pa(): cast arg to long
  fbdev: atafb - Remove undead ifdef ATAFB_FALCON
  zorro: Fix device_register() error handling
  fbdev/m68k: Fix section mismatches in q40fb.c
  m68k/m68knommu: merge the MMU and non-MMU traps.h
  m68k/m68knommu: merge MMU and non-MMU thread_info.h
  m68k/m68knommu: merge MMU and non-MMU atomic.h
  m68k/m68knommu: clean up page.h
  m68k/m68knommu: merge machdep.h files into a single file
  m68k/m68knommu: merge MMU and non-MMU string.h
  m68k/m68knommu: Remove dead SMP config option
  m68k: move definition of THREAD_SIZE into thread_info_mm.h
  m68k: Use asm-generic/ioctls.h (enables termiox)
  m68k: Remove dead GG2 config option

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: Fix dlm lock status block comment in dlm.h
  dlm: Don't send callback to node making lock request when "try 1cb" fails

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (36 commits)
  xfs: semaphore cleanup
  xfs: Extend project quotas to support 32bit project ids
  xfs: remove xfs_buf wrappers
  xfs: remove xfs_cred.h
  xfs: remove xfs_globals.h
  xfs: remove xfs_version.h
  xfs: remove xfs_refcache.h
  xfs: fix the xfs_trans_committed
  xfs: remove unused t_callback field in struct xfs_trans
  xfs: fix bogus m_maxagi check in xfs_iget
  xfs: do not use xfs_mod_incore_sb_batch for per-cpu counters
  xfs: do not use xfs_mod_incore_sb for per-cpu counters
  xfs: remove XFS_MOUNT_NO_PERCPU_SB
  xfs: pack xfs_buf structure more tightly
  xfs: convert buffer cache hash to rbtree
  xfs: serialise inode reclaim within an AG
  xfs: batch inode reclaim lookup
  xfs: implement batched inode lookups for AG walking
  xfs: split out inode walk inode grabbing
  xfs: split inode AG walking into separate code for reclaim
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: update comments to reflect that percpu allocations are always zero-filled
  percpu: Optimize __get_cpu_var()
  x86, percpu: Optimize this_cpu_ptr
  percpu: clear memory allocated with the km allocator
  percpu: fix build breakage on s390 and cleanup build configuration tests
  percpu: use percpu allocator on UP too
  percpu: reduce PCPU_MIN_UNIT_SIZE to 32k
  vmalloc: pcpu_get/free_vm_areas() aren't needed on UP

Fixed up trivial conflicts in include/linux/percpu.h

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: remove in_workqueue_context()
  workqueue: Clarify that schedule_on_each_cpu is synchronous
  memory_hotplug: drop spurious calls to flush_scheduled_work()
  shpchp: update workqueue usage
  pciehp: update workqueue usage
  isdn/eicon: don't call flush_scheduled_work() from diva_os_remove_soft_isr()
  workqueue: add and use WQ_MEM_RECLAIM flag
  workqueue: fix HIGHPRI handling in keep_working()
  workqueue: add queue_work and activate_work trace points
  workqueue: prepare for more tracepoints
  workqueue: implement flush[_delayed]_work_sync()
  workqueue: factor out start_flush_work()
  workqueue: cleanup flush/cancel functions
  workqueue: implement alloc_ordered_workqueue()

Fix up trivial conflict in fs/gfs2/main.c as per Tejun

* 'for-2.6.37/misc' of git://git.kernel.dk/linux-2.6-block:
  pipe: fix failure to return error code on ->confirm()

* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
  xen-blkfront: disable barrier/flush write support
  Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
  block: remove BLKDEV_IFL_WAIT
  aic7xxx_old: removed unused 'req' variable
  block: remove the BH_Eopnotsupp flag
  block: remove the BLKDEV_IFL_BARRIER flag
  block: remove the WRITE_BARRIER flag
  swap: do not send discards as barriers
  fat: do not send discards as barriers
  ext4: do not send discards as barriers
  jbd2: replace barriers with explicit flush / FUA usage
  jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  jbd: replace barriers with explicit flush / FUA usage
  nilfs2: replace barriers with explicit flush / FUA usage
  reiserfs: replace barriers with explicit flush / FUA usage
  gfs2: replace barriers with explicit flush / FUA usage
  btrfs: replace barriers with explicit flush / FUA usage
  xfs: replace barriers with explicit flush / FUA usage
  block: pass gfp_mask and flags to sb_issue_discard
  dm: convey that all flushes are processed as empty
  ...

* 'for-2.6.37/drivers' of git://git.kernel.dk/linux-2.6-block: (95 commits)
  cciss: fix PCI IDs for new Smart Array controllers
  drbd: add race-breaker to drbd_go_diskless
  drbd: use dynamic_dev_dbg to optionally log uuid changes
  dynamic_debug.h: Fix dynamic_dev_dbg() macro if CONFIG_DYNAMIC_DEBUG not set
  drbd: cleanup: change "<= 0" to "== 0"
  drbd: relax the grace period of the md_sync timer again
  drbd: add some more explicit drbd_md_sync
  drbd: drop wrong debug asserts, fix recently introduced race
  drbd: cleanup useless leftover warn/error printk's
  drbd: add explicit drbd_md_sync to drbd_resync_finished
  drbd: Do not log an ASSERT for P_OV_REQUEST packets while C_CONNECTED
  drbd: fix for possible deadlock on IO error during resync
  drbd: fix unlikely access after free and list corruption
  drbd: fix for spurious fullsync (uuids rotated too fast)
  drbd: allow for explicit resync-finished notifications
  drbd: preparation commit, using full state in receive_state()
  drbd: drbd_send_ack_dp must not rely on header information
  drbd: Fix regression in recv_bm_rle_bits (compressed bitmap)
  drbd: Fixed a stupid copy and paste error
  drbd: Allow larger values for c-fill-target.
  ...

Fix up trivial conflict in drivers/block/ataflop.c due to BKL removal

* 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block: (39 commits)
  cfq-iosched: Fix a gcc 4.5 warning and put some comments
  block: Turn bvec_k{un,}map_irq() into static inline functions
  block: fix accounting bug on cross partition merges
  block: Make the integrity mapped property a bio flag
  block: Fix double free in blk_integrity_unregister
  block: Ensure physical block size is unsigned int
  blkio-throttle: Fix possible multiplication overflow in iops calculations
  blkio-throttle: limit max iops value to UINT_MAX
  blkio-throttle: There is no need to convert jiffies to milli seconds
  blkio-throttle: Fix link failure failure on i386
  blkio: Recalculate the throttled bio dispatch time upon throttle limit change
  blkio: Add root group to td->tg_list
  blkio: deletion of a cgroup was causes oops
  blkio: Do not export throttle files if CONFIG_BLK_DEV_THROTTLING=n
  block: set the bounce_pfn to the actual DMA limit rather than to max memory
  block: revert bad fix for memory hotplug causing bounces
  Fix compile error in blk-exec.c for !CONFIG_DETECT_HUNG_TASK
  block: set the bounce_pfn to the actual DMA limit rather than to max memory
  block: Prevent hang_check firing during long I/O
  cfq: improve fsync performance for small files
  ...

Fix up trivial conflicts due to __rcu sparse annotation in include/linux/genhd.h

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: tighten the corrupted PEB criteria
  UBI: fix check_data_ff return code
  UBI: remember copy_flag while scanning
  UBI: preserve corrupted PEBs
  UBI: add truly corrupted PEBs to corrupted list
  UBI: introduce debugging helper function
  UBI: make check_pattern function non-static
  UBI: do not put eraseblocks to the corrupted list unnecessarily
  UBI: separate out corrupted list
  UBI: change cascade of ifs to switch statements
  UBI: rename a local variable
  UBI: handle bit-flips when no header found
  UBI: remove duplicate IO error codes
  UBI: rename IO error code
  UBI: fix small 80 characters limit style issue
  UBI: cleanup and simplify Kconfig

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: do not allocate unneeded scan buffer
  UBIFS: do not forget to cancel timers
  UBIFS: remove a bit of unneeded code
  UBIFS: add a commentary about log recovery
  UBIFS: avoid kernel error if ubifs superblock read fails
  UBIFS: introduce new flags for RO mounts
  UBIFS: introduce new flag for RO due to errors
  UBIFS: check return code of pnode_lookup
  UBIFS: check return code of ubifs_lpt_lookup
  UBIFS: improve error reporting when reading bad node
  UBIFS: introduce list sorting debugging checks
  UBIFS: fix assertion warnings in comparison function
  UBIFS: mark unused key objects as invalid
  UBIFS: do not write rubbish into truncation scanning node
  UBIFS: improve assertion in node comparison functions
  UBIFS: do not use key type in list_sort
  UBIFS: do not look up truncation nodes
  UBIFS: fix assertion warning
  UBIFS: do not treat ENOSPC specially
  UBIFS: switch to RO mode after synchronizing

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: fix ni_daq_700 compilation
  pcmcia: IOCARD is also required for using IRQs

* git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic/io.h: allow people to override individual funcs
  bitops: remove duplicated extern declarations
  bitops: make asm-generic/bitops/find.h more generic
  asm-generic: kdebug.h: Checkpatch cleanup
  asm-generic: fcntl: make exported headers use strict posix types
  asm-generic: cmpxchg does not handle non-long arguments
  asm-generic: make atomic_add_unless a function

* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek

* 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: (30 commits)
  BKL: remove BKL from freevxfs
  BKL: remove BKL from qnx4
  autofs4: Only declare function when CONFIG_COMPAT is defined
  autofs: Only declare function when CONFIG_COMPAT is defined
  ncpfs: Lock socket in ncpfs while setting its callbacks
  fs/locks.c: prepare for BKL removal
  BKL: Remove BKL from ncpfs
  BKL: Remove BKL from OCFS2
  BKL: Remove BKL from squashfs
  BKL: Remove BKL from jffs2
  BKL: Remove BKL from ecryptfs
  BKL: Remove BKL from afs
  BKL: Remove BKL from USB gadgetfs
  BKL: Remove BKL from autofs4
  BKL: Remove BKL from isofs
  BKL: Remove BKL from fat
  BKL: Remove BKL from ext2 filesystem
  BKL: Remove BKL from do_new_mount()
  BKL: Remove BKL from cgroup
  BKL: Remove BKL from NTFS
  ...

* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  block: autoconvert trivial BKL users to private mutex
  drivers: autoconvert trivial BKL users to private mutex
  ipmi: autoconvert trivial BKL users to private mutex
  mac: autoconvert trivial BKL users to private mutex
  mtd: autoconvert trivial BKL users to private mutex
  scsi: autoconvert trivial BKL users to private mutex

Fix up trivial conflicts (due to addition of private mutex right next to
deletion of a version string) in drivers/char/pcmcia/cm40[04]0_cs.c

* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  BKL: introduce CONFIG_BKL.
  dabusb: remove the BKL
  sunrpc: remove the big kernel lock
  init/main.c: remove BKL notations
  blktrace: remove the big kernel lock
  rtmutex-tester: make it build without BKL
  dvb-core: kill the big kernel lock
  dvb/bt8xx: kill the big kernel lock
  tlclk: remove big kernel lock
  fix rawctl compat ioctls breakage on amd64 and itanic
  uml: kill big kernel lock
  parisc: remove big kernel lock
  cris: autoconvert trivial BKL users
  alpha: kill big kernel lock
  isapnp: BKL removal
  s390/block: kill the big kernel lock
  hpet: kill BKL, add compat_ioctl

Running a serial console, if too many kernel messages are generated within
a short time causing a lot of serial I/O, the 8250 driver will generate
another kernel message reporting this, which just adds to the I/O. It has
a cascading effect and quickly results the system being brought to its knees
by a flood of "too much work" messages.

Ratelimit the error message to avoid this.

[akpm@linux-foundation.org: use the superior printk_ratelimited()]
[akpm@linux-foundation.org: printk_ratelimited() needs ratelimit.h]
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The actual uart baud rate of devices vary between +/-2% of what is
asked.  The SPORT RX sample rate should be faster than double of the
worst case.  Otherwise, wrong data may be received.  So set SPORT RX
clock to be 3% faster in general.
Reported-by: NOlivier STOCK <ostockemer@ereca.fr>
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Not every platform that has generic legacy 8250 ports manages to have them
clocked the right way or without errata. Provide a generic interface to
allow platforms to override the default behaviour in a manner that dumps
the complexity in *their* code not the 8250 driver.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The .start_tx callback (imx_start_tx here) isn't only called when the
buffer is non-empty.  E.g. after resume or when handshaking is enabled
and the other side starts to signal being ready.

So check for an empty puffer already before sending the first character.
This prevents sending out stale (or uninitialised) data.
Signed-off-by: NVolker Ernst <volker.ernst@txtr.com>
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Cc: Andy Green <andy@warmcat.com>
[ukl: reword commit log, put check in while condition]
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add more baud rates support referring the baud_table[] defined
in drivers/char/tty_ioctl.c: 3000000/2000000/1000000/500000
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Acked-by: NAlan Cox <alan.cox@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If kzmalloc fails, the uart port is not removed causing a leak.
This patch just add another label that removes the uart when the
kzmalloc fails.
Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Custom UART PM hook for Alchemy chips:  do standard UART pm and
additionally en/disable uart block clocks as needed.
This allows to get rid of a debug port PM hack in the Alchemy pm code.

Tested on Db1200.
Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add a hook for platforms to specify custom pm methods.
Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes sparse warning.
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Acked-by: NTobias Klauser <tklauser@distanz.ch>

Simply add an early_altera_uart_setup() prototype declaration, otherwise
platform code have to do it in .c files, which is ugly.
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Acked-by: NTobias Klauser <tklauser@distanz.ch>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

port->flags is of type upf_t, which corresponds to UPF_* flags.

ASYNC_BOOT_AUTOCONF is an unsigned integer, which happen to
be the same as UPF_BOOT_AUTOCONF.
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Acked-by: NTobias Klauser <tklauser@distanz.ch>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes tty name, major and minor numbers. The major number
204 is used across many platform-specific serial drivers, so we
use that.
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Acked-by: NTobias Klauser <tklauser@distanz.ch>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some controllers implement registers with a stride, to support
those we must implement the proper IO accessors.
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Acked-by: NTobias Klauser <tklauser@distanz.ch>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This makes it much easier to integrate the driver with the rest of
the Linux (e.g. MFD subsystem).

The old method is still supported though.

Also, from now on, there is one platform device per port (no
changes are needed for the platform code, as no one registers
the devices anywhere in-tree yet).
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Acked-by: NTobias Klauser <tklauser@distanz.ch>
Cc: Alan Cox <alan@linux.intel.com>,
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some Altera UART implementations doesn't route the IRQ line, so we have
to work in polling mode.
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Acked-by: NTobias Klauser <tklauser@distanz.ch>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Soon we will use that handy function in the altera_uart driver.
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Clearly I have gone insane, so I might as well tell the world about it.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The loop in wait_for_xmitr() is delaying one extra uS after the ready
condition has been met.  Rewrite the loop to only delay if the
transmitter is not ready.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>