- 16 11月, 2016 9 次提交
-
-
由 Pablo Neira 提交于
Honor udptable parameter that is passed to __udp*_lib_mcast_deliver(), otherwise udplite broadcast/multicast use the wrong table and it breaks. Fixes: 2dc41cff ("udp: Use hash2 for long hash1 chains in __udp*_lib_mcast_deliver.") Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Kochetkov 提交于
The patch disable capturing multicast packets when multicast mode disabled for ethernet ('ifconfig eth0 -multicast'). In that case no multicast packet will be passed to kernel. Signed-off-by: NAlexander Kochetkov <al.kochet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Kochetkov 提交于
Multicast support was implemented by commit 775dd682 ('arc_emac: implement promiscuous mode and multicast filtering'). It can be enabled explicity using 'ifconfig eth0 multicast'. The patch is needed in order to remove explicit configuration as most devices has multicast mode enabled by default. Signed-off-by: NAlexander Kochetkov <al.kochet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Giuseppe Cavallaro says: ==================== stmmac: fix PTP support This subset of patches aim to fix the PTP support for the stmmac and especially for 4.x chip series. While setting PTP on an ST box with 4.00a Ethernet core, the kernel panics due to a broken settings of the descriptors. The patches review the register configuration, the algo used for configuring the protocol, the way to get the timestamp inside the RX/TX descriptors and, in the end, the statistics displayed by ethtool. V2: RESEND all the patches adding the Acked-by. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch fixes the ethtool stats for PTP frames; previous version does not take care about some message types: i.e. announce, management and signaling. It also provided a broken statistic in case of "No PTP message received". Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: NRayagond Kokatanur <rayagond@vayavyalabs.com> Acked-by: NAlexandre TORGUE <alexandre.torgue@st.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
Due to bad management of the descriptors, when use ptp4l, kernel panics as shown below: ----------------------------------------------------------- Unable to handle kernel NULL pointer dereference at virtual address 000001ac ... Internal error: Oops: 17 [#1] SMP ARM ... Hardware name: STi SoC with Flattened Device Tree task: c0c05e80 task.stack: c0c00000 PC is at dwmac4_wrback_get_tx_timestamp_status+0x0/0xc LR is at stmmac_tx_clean+0x2f8/0x4d4 ----------------------------------------------------------- In case of GMAC4 the extended descriptor pointers were used for getting the timestamp. These are NULL for this HW, and the normal ones must be used. The PTP also had problems on this chip due to the bad register management and issues on the algo adopted to setup the PTP and getting the timestamp values from the descriptors. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: NRayagond Kokatanur <rayagond@vayavyalabs.com> Acked-by: NAlexandre TORGUE <alexandre.torgue@st.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch is to update this file by using BIT macros, removing not used defines and fixes some typos. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: NRayagond Kokatanur <rayagond@vayavyalabs.com> Acked-by: NAlexandre TORGUE <alexandre.torgue@st.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hangbin Liu 提交于
In commit 24cf3af3 ("igmp: call ip_mc_clear_src..."), we forgot to remove igmpv3_clear_delrec() in ip_mc_down(), which also called ip_mc_clear_src(). This make us clear all IGMPv3 source filter info after NETDEV_DOWN. Move igmpv3_clear_delrec() to ip_mc_destroy_dev() and then no need ip_mc_clear_src() in ip_mc_destroy_dev(). On the other hand, we should restore back instead of free all source filter info in igmpv3_del_delrec(). Or we will not able to restore IGMPv3 source filter info after NETDEV_UP and NETDEV_POST_TYPE_CHANGE. Fixes: 24cf3af3 ("igmp: call ip_mc_clear_src() only when ...") Signed-off-by: NHangbin Liu <liuhangbin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jia Jie Ho 提交于
TSE PCS SGMII ethernet has an issue where switching speed doesn't work caused by a faulty register macro offset. This fixes the issue. Signed-off-by: NJia Jie Ho <ho.jia.jie@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 11月, 2016 19 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix off by one wrt. indexing when dumping /proc/net/route entries, from Alexander Duyck. 2) Fix lockdep splats in iwlwifi, from Johannes Berg. 3) Cure panic when inserting certain netfilter rules when NFT_SET_HASH is disabled, from Liping Zhang. 4) Memory leak when nft_expr_clone() fails, also from Liping Zhang. 5) Disable UFO when path will apply IPSEC tranformations, from Jakub Sitnicki. 6) Don't bogusly double cwnd in dctcp module, from Florian Westphal. 7) skb_checksum_help() should never actually use the value "0" for the resulting checksum, that has a special meaning, use CSUM_MANGLED_0 instead. From Eric Dumazet. 8) Per-tx/rx queue statistic strings are wrong in qed driver, fix from Yuval MIntz. 9) Fix SCTP reference counting of associations and transports in sctp_diag. From Xin Long. 10) When we hit ip6tunnel_xmit() we could have come from an ipv4 path in a previous layer or similar, so explicitly clear the ipv6 control block in the skb. From Eli Cooper. 11) Fix bogus sleeping inside of inet_wait_for_connect(), from WANG Cong. 12) Correct deivce ID of T6 adapter in cxgb4 driver, from Hariprasad Shenai. 13) Fix potential access past the end of the skb page frag array in tcp_sendmsg(). From Eric Dumazet. 14) 'skb' can legitimately be NULL in inet{,6}_exact_dif_match(). Fix from David Ahern. 15) Don't return an error in tcp_sendmsg() if we wronte any bytes successfully, from Eric Dumazet. 16) Extraneous unlocks in netlink_diag_dump(), we removed the locking but forgot to purge these unlock calls. From Eric Dumazet. 17) Fix memory leak in error path of __genl_register_family(). We leak the attrbuf, from WANG Cong. 18) cgroupstats netlink policy table is mis-sized, from WANG Cong. 19) Several XDP bug fixes in mlx5, from Saeed Mahameed. 20) Fix several device refcount leaks in network drivers, from Johan Hovold. 21) icmp6_send() should use skb dst device not skb->dev to determine L3 routing domain. From David Ahern. 22) ip_vs_genl_family sets maxattr incorrectly, from WANG Cong. 23) We leak new macvlan port in some cases of maclan_common_netlink() errors. Fix from Gao Feng. 24) Similar to the icmp6_send() fix, icmp_route_lookup() should determine L3 routing domain using skb_dst(skb)->dev not skb->dev. Also from David Ahern. 25) Several fixes for route offloading and FIB notification handling in mlxsw driver, from Jiri Pirko. 26) Properly cap __skb_flow_dissect()'s return value, from Eric Dumazet. 27) Fix long standing regression in ipv4 redirect handling, wrt. validating the new neighbour's reachability. From Stephen Suryaputra Lin. 28) If sk_filter() trims the packet excessively, handle it reasonably in tcp input instead of exploding. From Eric Dumazet. 29) Fix handling of napi hash state when copying channels in sfc driver, from Bert Kenward. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (121 commits) mlxsw: spectrum_router: Flush FIB tables during fini net: stmmac: Fix lack of link transition for fixed PHYs sctp: change sk state only when it has assocs in sctp_shutdown bnx2: Wait for in-flight DMA to complete at probe stage Revert "bnx2: Reset device during driver initialization" ps3_gelic: fix spelling mistake in debug message net: ethernet: ixp4xx_eth: fix spelling mistake in debug message ibmvnic: Fix size of debugfs name buffer ibmvnic: Unmap ibmvnic_statistics structure sfc: clear napi_hash state when copying channels mlxsw: spectrum_router: Correctly dump neighbour activity mlxsw: spectrum: Fix refcount bug on span entries bnxt_en: Fix VF virtual link state. bnxt_en: Fix ring arithmetic in bnxt_setup_tc(). Revert "include/uapi/linux/atm_zatm.h: include linux/time.h" tcp: take care of truncations done by sk_filter() ipv4: use new_gw for redirect neigh lookup r8152: Fix error path in open function net: bpqether.h: remove if_ether.h guard net: __skb_flow_dissect() must cap its return value ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull arch/tile bugfix from Chris Metcalf: "This just fixes an incompatibility with tile __ro_after_init" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: handle __ro_after_init like parisc does
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux由 Linus Torvalds 提交于
Pull RTC fixes from Alexandre Belloni: "Here are a few driver fixes for 4.9. It has been calm for a while so I don't expect more for this cycle. Drivers: - asm9260: fix module autoload - cmos: fix crashes - omap: fix clock handling" * tag 'rtc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: omap: prevent disabling of clock/module during suspend rtc: omap: Fix selecting external osc rtc: cmos: Don't enable interrupts in the middle of the interrupt handler rtc: cmos: remove all __exit_p annotations rtc: asm9260: fix module autoload
-
由 Chris Metcalf 提交于
The tile architecture already marks RO_DATA as read-only in the kernel, so grouping RO_AFTER_INIT_DATA with RO_DATA, as is done by default, means the kernel faults in init when it tries to write to RO_AFTER_INIT_DATA. For now, just arrange that __ro_after_init is handled like __write_once, i.e. __read_mostly. Reviewed-by: NKees Cook <keescook@chromium.org> Signed-off-by: NChris Metcalf <cmetcalf@mellanox.com>
-
由 Ido Schimmel 提交于
Since commit b45f64d1 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") we reflect to the device the entire FIB table and not only FIBs that point to netdevs created by the driver. During module removal, FIBs of the second type are removed following NETDEV_UNREGISTER events sent. The other FIBs are still present in both the driver's cache and the device's table. Fix this by iterating over all the FIB tables in the device and flush them. There's no need to take locks, as we're the only writer. Fixes: b45f64d1 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Commit 52f95bbf ("stmmac: fix adjust link call in case of a switch is attached") added some logic to avoid polling the fixed PHY and therefore invoking the adjust_link callback more than once, since this is a fixed PHY and link events won't be generated. This works fine the first time, because we start with phydev->irq = PHY_POLL, so we call adjust_link, then we set phydev->irq = PHY_IGNORE_INTERRUPT and we stop polling the PHY. Now, if we called ndo_close(), which calls both phy_stop() and does an explicit netif_carrier_off(), we end up with a link down. Upon calling ndo_open() again, despite starting the PHY state machine, we have PHY_IGNORE_INTERRUPT set, and we generate no link event at all, so the link is permanently down. Fixes: 52f95bbf ("stmmac: fix adjust link call in case of a switch is attached") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Now when users shutdown a sock with SEND_SHUTDOWN in sctp, even if this sock has no connection (assoc), sk state would be changed to SCTP_SS_CLOSING, which is not as we expect. Besides, after that if users try to listen on this sock, kernel could even panic when it dereference sctp_sk(sk)->bind_hash in sctp_inet_listen, as bind_hash is null when sock has no assoc. This patch is to move sk state change after checking sk assocs is not empty, and also merge these two if() conditions and reduce indent level. Fixes: d46e416c ("sctp: sctp should change socket state when shutdown is received") Reported-by: NAndrey Konovalov <andreyknvl@google.com> Tested-by: NAndrey Konovalov <andreyknvl@google.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Baoquan He says: ==================== bnx2: Wait for in-flight DMA to complete at probe stage This is v2 post. In commit 3e1be7ad ("bnx2: Reset device during driver initialization"), firmware requesting code was moved from open stage to probe stage. The reason is in kdump kernel hardware iommu need device be reset in driver probe stage, otherwise those in-flight DMA from 1st kernel will continue going and look up into the newly created io-page tables. However bnx2 chip resetting involves firmware requesting issue, that need be done in open stage. Michale Chan suggested we can just wait for the old in-flight DMA to complete at probe stage, then though without device resetting, we don't need to worry the old in-flight DMA could continue looking up the newly created io-page tables. v1->v2: Michael suggested to wait for the in-flight DMA to complete at probe stage. So give up the old method of trying to reset chip at probe stage, take the new way accordingly. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Baoquan He 提交于
In-flight DMA from 1st kernel could continue going in kdump kernel. New io-page table has been created before bnx2 does reset at open stage. We have to wait for the in-flight DMA to complete to avoid it look up into the newly created io-page table at probe stage. Suggested-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NBaoquan He <bhe@redhat.com> Acked-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Baoquan He 提交于
This reverts commit 3e1be7ad. When people build bnx2 driver into kernel, it will fail to detect and load firmware because firmware is contained in initramfs and initramfs has not been uncompressed yet during do_initcalls. So revert commit 3e1be7ad and work out a new way in the later patch. Signed-off-by: NBaoquan He <bhe@redhat.com> Acked-by: NPaul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake "unmached" to "unmatched" in debug message. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
In commit 022d00ee ("ASoC: lpass-platform: Fix broken pcm data usage") the stream specific information initialization was broken, with the dma channel information not being initialized if there was no alloc_dma_channel() helper function. Before that, the DMA channel number was implicitly initialized to zero because the backing store was allocated with devm_kzalloc(). When the init code was rewritten, that implicit initialization was lost, and gcc rightfully complains about an uninitialized variable being used. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This reverts commit bfd8d3f2. It turns out that this flushes things much too aggressiverly, and causes lines to break up when the system logger races with new continuation lines being printed. There's a pending patch to make printk() flushing much more straightforward, but it's too invasive for 4.9, so in the meantime let's just not make the system message logging flush continuation lines. They'll be flushed by the final newline anyway. Suggested-by: NPetr Mladek <pmladek@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mauro Carvalho Chehab 提交于
This file was converted to a separate module at commit 7a0786c1 ("gp8psk: Fix DVB frontend attach"), because the DVB attach routines require it to work. However, I forgot to copy the MODULE_foo() macros from the original module, causing this warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/media/dvb-frontends/gp8psk-fe.o Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Fixes: 7a0786c1 ("gp8psk: Fix DVB frontend attach") Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Misc fixes: - fix an Intel/MID boot crash/hang bug - fix a cache topology mis-parsing bug on certain AMD CPUs - fix a virtualization firmware bug by adding a check+quirk workaround on the kernel side" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Deal with broken firmware (VMWare/XEN) x86/cpu/AMD: Fix cpu_llc_id for AMD Fam17h systems x86/platform/intel-mid: Retrofit pci_platform_pm_ops ->get_state hook
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fix from Ingo Molnar: "This fixes a genirq regression that resulted in the Intel/Broxton pinctrl/GPIO driver (and possibly others) spewing warnings" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Use irq type from irqdata instead of irqdesc
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "An uncore PMU driver hardware enablement change for Intel SkyLake uncore PMUs (Skylake Y, U, H and S platforms), plus a number of tooling fixes for the histogram handling/displaying code" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add more Intel uncore IMC PCI IDs for SkyLake perf hists: Fix column length on --hierarchy perf hists browser: Fix column indentation on --hierarchy perf hists browser: Show folded sign properly on --hierarchy perf hists browser: Fix indentation of folded sign on --hierarchy perf hist browser: Fix hierarchy column counts
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull EFI fixes from Ingo Molnar: "A boot crash fix and a build warning fix" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y x86/efi: Fix EFI memmap pointer size warning
-
git://github.com/jonmason/ntb由 Linus Torvalds 提交于
Pull NTB fixes from Jon Mason: "NTB bug fixes for ntb_hw_intel, ntb_perf, and ntb_pingpong. Also, a fixup to use jiffies in schedule_timeout_* call instead of a constant" * tag 'ntb-4.9' of git://github.com/jonmason/ntb: ntb_perf: potential info leak in debugfs ntb: ntb_hw_intel: init peer_addr in struct intel_ntb_dev ntb: make DMA_OUT_RESOURCE_TO HZ independent ntb_transport: make DMA_OUT_RESOURCE_TO HZ independent NTB: ntb_hw_intel: Fix typo in module parameter descriptions ntb_pingpong: Fix db_init parameter description
-
- 14 11月, 2016 12 次提交
-
-
由 Dan Carpenter 提交于
This is a static checker warning, not something I'm desperately concerned about. But snprintf() returns the number of bytes that would have been copied if there were space. We really care about the number of bytes that actually were copied so we should use scnprintf() instead. It probably won't overrun, and in that case we may as well just use sprintf() but these sorts of things make static checkers and code reviewers happier. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Dave Jiang 提交于
The peer_addr member of intel_ntb_dev is not set, therefore when acquiring ntb_peer_db and ntb_peer_spad we only get the offset rather than the actual physical address. Adding fix to correct that. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Acked-by: NAllen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Nicholas Mc Guire 提交于
schedule_timeout_* takes a timeout in jiffies but the code currently is passing in a constant which makes this timeout HZ dependent, so pass it through msecs_to_jiffies() to fix this up. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Acked-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Nicholas Mc Guire 提交于
schedule_timeout_* takes a timeout in jiffies but the code currently is passing in a constant which makes this timeout HZ dependent, so pass it through msecs_to_jiffies() to fix this up. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Wei Yongjun 提交于
Fix typo in module parameter descriptions. Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com> Acked-by: NAllen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Wei Yongjun 提交于
Fix 'db_init' parameter description. Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com> Acked-by: NAllen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake "successed" to "succeeded" in debug message. Also unwrap multi-line literal string. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
This mistake was causing debugfs directory creation failures when multiple ibmvnic devices were probed. Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
This structure was mapped but never subsequently unmapped. Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bert Kenward 提交于
efx_copy_channel() doesn't correctly clear the napi_hash related state. This means that when napi_hash_add is called for that channel nothing is done, and we are left with a copy of the napi_hash_node from the old channel. When we later call napi_hash_del() on this channel we have a stale napi_hash_node. Corruption is only seen when there are multiple entries in one of the napi_hash lists. This is made more likely by having a very large number of channels. Testing was carried out with 512 channels - 32 channels on each of 16 ports. This failure typically appears as protection faults within napi_by_id() or napi_hash_add(). efx_copy_channel() is only used when tx or rx ring sizes are changed (ethtool -G). Fixes: 36763266 ("sfc: Add support for busy polling") Signed-off-by: NBert Kenward <bkenward@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: "ARM fixes. There are a couple pending x86 patches but they'll have to wait for next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs KVM: arm/arm64: vgic: Prevent access to invalid SPIs arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU
-