the tcp and udp code creates a set of struct file_operations at runtime
while it can also be done at compile time, with the added benefit of then
having these file operations be const.

the trickiest part was to get the "THIS_MODULE" reference right; the naive
method of declaring a struct in the place of registration would not work
for this reason.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Zheng Liang(lzheng@redhat.com) found a bug that if we config bonding with
arp monitor, sometimes bonding driver cannot get the speed and duplex from
its slaves, it will assume them to be 100Mb/sec and Full, please see
/proc/net/bonding/bond0.
But there is no such problem when uses miimon.

(Take igb for example)
I find that the reason is that after dev_open() in bond_enslave(),
bond_update_speed_duplex() will call igb_get_settings()
, but in that function,
it runs ethtool_cmd_speed_set(ecmd, -1); ecmd->duplex = -1;
because igb get an error value of status.
So even dev_open() is called, but the device is not really ready to get its
settings.

Maybe it is safe for us to call igb_get_settings() only after
this message shows up, that is "igb: p4p1 NIC Link is Up 1000 Mbps Full Duplex,
Flow Control: RX".

So I prefer to update the speed and duplex for a slave when reseices
NETDEV_CHANGE/NETDEV_UP event.

Changelog
V2:
1 remove the "fake 100/Full" logic in bond_update_speed_duplex(),
  set speed and duplex to -1 when it gets error value of speed and duplex.
2 delete the warning in bond_enslave() if bond_update_speed_duplex() returns
  error.
3 make bond_info_show_slave() handle bad values of speed and duplex.
Signed-off-by: NWeiping Pan <wpan@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When (de)configuring a vlan interface, the IFF_ALLMULTI ans IFF_PROMISC
flags are cleared or set on the underlying interface. So, if these flags
are changed on a vlan interface that is not up, the flags underlying
interface might be set or cleared twice.

Only propagating flag changes when a device is up makes sure this does
not happen. It also makes sure that an underlying device is not set to
promiscuous or allmulti mode for a vlan device that is down.
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Whatever situations make this state legitimate when SMP
also would be legitimate when !SMP and f.e. preemption is
enabled.

This is dubious enough that we should just delete it entirely.  If we
want to add debugging for neigh timer races, better more thorough
mechanisms are needed.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit f1585086
(netfilter: nfnetlink_queue: return error number to caller)
erronously assigns the return value of nf_queue() to the "ret" value.

This can cause bogus return values if we encounter QUEUE verdict
when bypassing is enabled, the listener does not exist and the
next hook returns NF_STOLEN.

In this case nf_hook_slow returned -ESRCH instead of 0.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Marc Boucher, James Morris and Rusty Russell were crucial in the
early netfilter days. We thank them all!

However, they are not actively maintaining netfilter anymore.

This patch adds myself as netfilter maintainer.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Several callers (h323 conntrack, xt_addrtype) assume that the
returned **dst only needs to be released if the function returns 0.

This is true for the ipv4 implementation, but not for the ipv6 one.

Instead of changing the users, change the ipv6 implementation
to behave like the ipv4 version by only providing the dst_entry result
in the success case.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This is to address the following error during the compilation:

  In file included from kernel/sysctl_binary.c:6:
  include/net/ip_vs.h:1406: error: expected identifier or ‘(’ before ‘{’ token
  make[1]: *** [kernel/sysctl_binary.o] Error 1
  make[1]: *** Waiting for unfinished jobs....

That manifests itself when CONFIG_IP_VS_NFCT is undefined in .config file.
Signed-off-by: NKrzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

This is to address the following warning during compilation time:

  net/netfilter/ipvs/ip_vs_core.c: In function ‘ip_vs_leave’:
  net/netfilter/ipvs/ip_vs_core.c:532: warning: unused variable ‘cs’

This variable is indeed no longer in use.
Signed-off-by: NKrzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

This patch exports several definitions that used to live under
include/net/netfilter/nf_nat.h. These definitions, although not
exported, have been used by iptables and other userspace
applications like miniupnpd since long time. Basically, these
userspace tools included some internal definition of the required
structures and they assume no changes in the binary representation
(which is OK indeed).

To resolve this situation, this patch makes public the required
structure and install them in INSTALL_HDR_PATH.

See: https://bugs.gentoo.org/376873, for more information.

This patch is heavily based on the initial patch sent by:

Anthony G. Basile <blueness@gentoo.org>

Which was entitled:

netfilter: export sanitized nf_nat.h to INSTALL_HDR_PATH
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Site specific OOM messages are duplications of a generic MM
out of memory message and aren't really useful, so just
delete them.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Also reword the test to make it read more easily (to me)
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

ipvs is not used in ip_vs_genl_set_cmd() or ip_vs_genl_get_cmd()
Acked-by: NJulian Anastasov <ja@ssi.bg>
Acked-by Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Acked-by: NJulian Anastasov <ja@ssi.bg>
Acked-by Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Acked-by: NJulian Anastasov <ja@ssi.bg>
Acked-by Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Add missing documentation for conntrack, snat_reroute and sync_version.

Also fix up a typo, IPVS_DEBUG should be IP_VS_DEBUG.
Acked-by: NJulian Anastasov <ja@ssi.bg>
Acked-by Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This is to expose "ports" parameter via sysfs so it can be read
at any time in order to determine what port or ports were passed
to the module at the point when it was loaded.
Signed-off-by: NKrzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Fixes parameter name of skb_frag_dmamap function to silence warning on
make htmldocs.
Signed-off-by: NMarcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The `#define filename' screws up the expansion of
DEFINE_DYNAMIC_DEBUG_METADATA:

drivers/net/ethernet/i825xx/3c505.c: In function 'send_pcb':
drivers/net/ethernet/i825xx/3c505.c:390: error: expected identifier before string constant
drivers/net/ethernet/i825xx/3c505.c:390: error: expected '}' before '.' token
drivers/net/ethernet/i825xx/3c505.c:436: error: expected identifier before string constant
drivers/net/ethernet/i825xx/3c505.c:435: error: expected '}' before '.' token
drivers/net/ethernet/i825xx/3c505.c: In function 'start_receive':
drivers/net/ethernet/i825xx/3c505.c:557: error: expected identifier before string constant
drivers/net/ethernet/i825xx/3c505.c:557: error: expected '}' before '.' token
drivers/net/ethernet/i825xx/3c505.c: In function 'receive_packet':
drivers/net/ethernet/i825xx/3c505.c:629: error: expected identifier before string constant

etc

So remove that #define and "open-code" it.

Cc: Philip Blundell <philb@gnu.org>
Cc: David Miller <davem@davemloft.net>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Quoth Andrew:

 - Most of MM.  Still waiting for the poweroc guys to get off their
   butts and review some threaded hugepages patches.

 - alpha

 - vfs bits

 - drivers/misc

 - a few core kerenl tweaks

 - printk() features

 - MAINTAINERS updates

 - backlight merge

 - leds merge

 - various lib/ updates

 - checkpatch updates

* akpm: (127 commits)
  epoll: fix spurious lockdep warnings
  checkpatch: add a --strict check for utf-8 in commit logs
  kernel.h/checkpatch: mark strict_strto<foo> and simple_strto<foo> as obsolete
  llist-return-whether-list-is-empty-before-adding-in-llist_add-fix
  wireless: at76c50x: follow rename pack_hex_byte to hex_byte_pack
  fat: follow rename pack_hex_byte() to hex_byte_pack()
  security: follow rename pack_hex_byte() to hex_byte_pack()
  kgdb: follow rename pack_hex_byte() to hex_byte_pack()
  lib: rename pack_hex_byte() to hex_byte_pack()
  lib/string.c: fix strim() semantics for strings that have only blanks
  lib/idr.c: fix comment for ida_get_new_above()
  lib/percpu_counter.c: enclose hotplug only variables in hotplug ifdef
  lib/bitmap.c: quiet sparse noise about address space
  lib/spinlock_debug.c: print owner on spinlock lockup
  lib/kstrtox: common code between kstrto*() and simple_strto*() functions
  drivers/leds/leds-lp5521.c: check if reset is successful
  leds: turn the blink_timer off before starting to blink
  leds: save the delay values after a successful call to blink_set()
  drivers/leds/leds-gpio.c: use gpio_get_value_cansleep() when initializing
  drivers/leds/leds-lm3530.c: add __devexit_p where needed
  ...

epoll can acquire recursively acquire ep->mtx on multiple "struct
eventpoll"s at once in the case where one epoll fd is monitoring another
epoll fd.  This is perfectly OK, since we're careful about the lock
ordering, but it causes spurious lockdep warnings.  Annotate the recursion
using mutex_lock_nested, and add a comment explaining the nesting rules
for good measure.

Recent versions of systemd are triggering this, and it can also be
demonstrated with the following trivial test program:

--------------------8<--------------------

int main(void) {
   int e1, e2;
   struct epoll_event evt = {
       .events = EPOLLIN
   };

   e1 = epoll_create1(0);
   e2 = epoll_create1(0);
   epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt);
   return 0;
}
--------------------8<--------------------
Reported-by: NPaul Bolle <pebolle@tiscali.nl>
Tested-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NNelson Elhage <nelhage@nelhage.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some find using utf-8 in commit logs inappropriate.

Some patch commit logs contain unintended utf-8 characters when doing
things like copy/pasting compilation output.

Look for the start of any commit log by skipping initial lines that look
like email headers and "From: " lines.

Stop looking for utf-8 at the first signature line.
Signed-off-by: NJoe Perches <joe@perches.com>
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mark obsolete/deprecated strict_strto<foo> and simple_strto<foo> functions
and macros as obsolete.

Update checkpatch to warn about their use.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

clarify comment

Cc: Huang Ying <ying.huang@intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no functional change.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no functional change.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no functional change.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no functional change.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As suggested by Andrew Morton in [1] there is better to have most
significant part first in the function name.

[1] https://lkml.org/lkml/2011/9/20/22

There is no functional change.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Mimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 84c95c9a ("string: on strstrip(), first remove leading spaces
before running over str") improved the performance of the strim()
function.

Unfortunately this changed the semantics of strim() and broke my code.
Before the patch it was possible to use strim() without using the return
value for removing trailing spaces from strings that had either only
blanks or only trailing blanks.

Now this does not work any longer for strings that *only* have blanks.

Before patch: "   " -> ""    (empty string)
After patch:  "   " -> "   " (no change)

I think we should remove your patch to restore the old behavior.

The description (lib/string.c):

 * Note that the first trailing whitespace is replaced with a %NUL-terminator

=> The first trailing whitespace of a string that only has whitespace
   characters is the first whitespace

The patch restores the old strim() semantics.
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Andre Goddard Rosa <andre.goddard@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NWang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These variables are only used when CONFIG_HOTPLUG_CPU is enabled, they are
ifdef'ed everywhere else.  So don't define them when CONFIG_HOTPLUG_CPU is
not enabled.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__bitmap_parse() and __bitmap_parselist() both take a pointer to a kernel
buffer as a parameter and then cast it to a pointer to user buffer for use
in cases when the parameter is_user indicates that the buffer is actually
located in user space.  This casting, and the casts in the callers,
results in sparse noise like the following:

	warning: incorrect type in initializer (different address spaces)
	  expected char const [noderef] <asn:1>*ubuf
	  got char const *buf
	warning: cast removes address space of expression

Since these casts are intentional, use __force to quiet the noise.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When SPIN_BUG_ON is triggered, the lock owner information is reported.
But it is omitted when spinlock lockup is detected.

This information is useful especially on the architectures which don't
implement trigger_all_cpu_backtrace() that is called just after detecting
lockup.  So report it and also avoid message format duplication.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently termination logic (\0 or \n\0) is hardcoded in _kstrtoull(),
avoid that for code reuse between kstrto*() and simple_strtoull().
Essentially, make them different only in termination logic.

simple_strtoull() (and scanf(), BTW) ignores integer overflow, that's a
bug we currently don't have guts to fix, making KSTRTOX_OVERFLOW hack
necessary.

Almost forgot: patch shrinks code size by about ~80 bytes on x86_64.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make sure that the reset is successful by issuing a dummy read to R
channel current register and check its default value.  On some platforms,
without this dummy read, any further access to {R/G/B}_EXEC will not have
any impact.

[akpm@linux-foundation.org: fix up code comment]
Signed-off-by: Nsrinidhi kasagar <srinidhi.kasagar@stericsson.com>
Tested-by: NNaga Radhesh <naga.radheshy@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Depending on the implementation of the hardware blinking function in
blink_set(), the led can support hardware blinking for some values of
delay_on and delay_off and fall-back to software blinking for some other
values.

Turning off the blink_timer unconditionally before starting to blink
make sure that a sequence like:

  OFF
  hardware blinking
  software blinking
  hardware blinking

does not leave the software blinking timer active.
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Reviewed-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When calling the hardware blinking function implemented by blink_set(),
the delay_on and delay_off values are not preserved across calls.

Fix that and make the "timer" trigger work as expected when hardware
blinking is available.

BEFORE the fix:
  $ cd /sys/class/leds/someled
  $ echo timer > trigger
  $ cat delay_on delay_off
  0
  0
  $ echo 100 > delay_on
  $ cat delay_on delay_off
  0
  0
  $ echo 100 > delay_off
  $ cat delay_on delay_off
  0
  0

AFTER the fix:
  $ cd /sys/class/leds/someled
  $ echo timer > trigger
  $ cat delay_on delay_off
  0
  0
  $ echo 100 > delay_on
  $ cat delay_on delay_off
  100
  0
  $ echo 100 > delay_off
  $ cat delay_on delay_off
  100
  100
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Reviewed-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I get the following warning:

------------[ cut here ]------------
WARNING: at drivers/gpio/gpiolib.c:1559 __gpio_get_value+0x90/0x98()
Modules linked in:
Call Trace:
[<ffffffff81440950>] dump_stack+0x8/0x34
[<ffffffff81141478>] warn_slowpath_common+0x78/0xa0
[<ffffffff812f0958>] __gpio_get_value+0x90/0x98
[<ffffffff81434f04>] create_gpio_led+0xdc/0x194
[<ffffffff8143524c>] gpio_led_probe+0x290/0x36c
[<ffffffff8130e8b0>] driver_probe_device+0x78/0x1b0
[<ffffffff8130eaa8>] __driver_attach+0xc0/0xc8
[<ffffffff8130d7ac>] bus_for_each_dev+0x64/0xb0
[<ffffffff8130e130>] bus_add_driver+0x1c8/0x2a8
[<ffffffff8130f100>] driver_register+0x90/0x180
[<ffffffff81100438>] do_one_initcall+0x38/0x160

---[ end trace ee38723fbefcd65c ]---

My GPIOs are on an I2C port expander, so we must use the *_cansleep()
variant of the GPIO functions.  This is was not being done in
create_gpio_led().

We can change gpio_get_value() to gpio_get_value_cansleep() because it is
only called from the platform_driver probe function, which is a context
where we can sleep.

Only tested on my gpio_cansleep() system, but it seems safe for all
systems.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: NTrent Piepho <tpiepho@gmail.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>