Pass struct rpc_request as the first argument instead of an untyped blob.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Acked-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Pass struct rpc_request as the first argument instead of an untyped blob,
and mark the data object as const.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJeff Layton <jlayton@redhat.com>

When mempool_alloc() is allowed to sleep (GFP_NOIO allows
sleeping) it cannot fail.
So rpc_alloc_task() cannot fail, so rpc_new_task doesn't need
to test for failure.
Consequently rpc_new_task() cannot fail, so the callers
don't need to test.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Set the timeout for TCP connections to be 1 lease period to ensure
that we don't lose our lease due to a faulty TCP connection.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

When the NFSv4 server tells us the lease period, we usually want
to adjust down the timeout parameters on the TCP connection to
ensure that we don't miss lease renewals due to a faulty connection.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

After removing sunrpc module, I get many kmemleak information as,
unreferenced object 0xffff88003316b1e0 (size 544):
  comm "gssproxy", pid 2148, jiffies 4294794465 (age 4200.081s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffffb0cfb58a>] kmemleak_alloc+0x4a/0xa0
    [<ffffffffb03507fe>] kmem_cache_alloc+0x15e/0x1f0
    [<ffffffffb0639baa>] ida_pre_get+0xaa/0x150
    [<ffffffffb0639cfd>] ida_simple_get+0xad/0x180
    [<ffffffffc06054fb>] nlmsvc_lookup_host+0x4ab/0x7f0 [lockd]
    [<ffffffffc0605e1d>] lockd+0x4d/0x270 [lockd]
    [<ffffffffc06061e5>] param_set_timeout+0x55/0x100 [lockd]
    [<ffffffffc06cba24>] svc_defer+0x114/0x3f0 [sunrpc]
    [<ffffffffc06cbbe7>] svc_defer+0x2d7/0x3f0 [sunrpc]
    [<ffffffffc06c71da>] rpc_show_info+0x8a/0x110 [sunrpc]
    [<ffffffffb044a33f>] proc_reg_write+0x7f/0xc0
    [<ffffffffb038e41f>] __vfs_write+0xdf/0x3c0
    [<ffffffffb0390f1f>] vfs_write+0xef/0x240
    [<ffffffffb0392fbd>] SyS_write+0xad/0x130
    [<ffffffffb0d06c37>] entry_SYSCALL_64_fastpath+0x1a/0xa9
    [<ffffffffffffffff>] 0xffffffffffffffff

I found, the ida information (dynamic memory) isn't cleanup.
Signed-off-by: NKinglong Mee <kinglongmee@gmail.com>
Fixes: 2f048db4 ("SUNRPC: Add an identifier for struct rpc_clnt")
Cc: stable@vger.kernel.org # v3.12+
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

xs_connect() contains an exponential backoff mechanism so the repeated
connection attempts are delayed by longer and longer amounts.

This is appropriate when the connection failed due to a timeout, but
it not appropriate when a definitive "no" answer is received.  In such
cases, call_connect_status() imposes a minimum 3-second back-off, so
not having the exponetial back-off will never result in immediate
retries.

The current situation is a problem when the NFS server tries to
register with rpcbind but rpcbind isn't running.  All connection
attempts are made on the same "xprt" and as the connection is never
"closed", the exponential back delays successive attempts to register,
or de-register, different protocols.  This results in a multi-minute
delay with no benefit.

So, when call_connect_status() receives a definitive "no", use
xprt_conditional_disconnect() to cancel the previous connection attempt.
This will set XPRT_CLOSE_WAIT so that xprt->ops->close() calls xs_close()
which resets the reestablish_timeout.

To ensure xprt_conditional_disconnect() does the right thing, we
ensure that rq_connect_cookie is set before a connection attempt, and
allow xprt_conditional_disconnect() to complete even when the
transport is not fully connected.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

We need to hold the rcu_read_lock() when calling rcu_dereference(),
otherwise we can't guarantee that the object being dereferenced still
exists.

Fixes: 39e5d2df ("SUNRPC search xprt switch for sockaddr")
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

For xprtrdma, the RPC Call and Reply buffers are involved in real
I/O operations.

To start with, the DMA direction of the I/O for a Call is opposite
that of a Reply.

In the current arrangement, the Reply buffer address is on a
four-byte alignment just past the call buffer. Would be friendlier
on some platforms if that was at a DMA cache alignment instead.

Because the current arrangement allocates a single memory region
which contains both buffers, the RPC Reply buffer often contains a
page boundary in it when the Call buffer is large enough (which is
frequent).

It would be a little nicer for setting up DMA operations (and
possible registration of the Reply buffer) if the two buffers were
separated, well-aligned, and contained as few page boundaries as
possible.

Now, I could just pad out the single memory region used for the pair
of buffers. But frequently that would mean a lot of unused space to
ensure the Reply buffer did not have a page boundary.

Add a separate pointer to rpc_rqst that points right to the RPC
Reply buffer. This makes no difference to xprtsock, but it will help
xprtrdma in subsequent patches.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

xprtrdma needs to allocate the Call and Reply buffers separately.
TBH, the reliance on using a single buffer for the pair of XDR
buffers is transport implementation-specific.

Transports that want to allocate separate Call and Reply buffers
will ignore the "size" argument anyway.  Don't bother passing it.

The buf_alloc method can't return two pointers. Instead, make the
method's return value an error code, and set the rq_buffer pointer
in the method itself.

This gives call_allocate an opportunity to terminate an RPC instead
of looping forever when a permanent problem occurs. If a request is
just bogus, or the transport is in a state where it can't allocate
resources for any request, there needs to be a way to kill the RPC
right there and not loop.

This immediately fixes a rare problem in the backchannel send path,
which loops if the server happens to send a CB request whose
call+reply size is larger than a page (which it shouldn't do yet).

One more issue: looks like xprt_inject_disconnect was incorrectly
placed in the failure path in call_allocate. It needs to be in the
success path, as it is for other call-sites.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: there is some XDR initialization logic that is common
to the forward channel and backchannel. Move it to an XDR header
so it can be shared.

rpc_rqst::rq_buffer points to a buffer containing big-endian data.
Update its annotation as part of the clean up.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Use a setup function to call into the NFS layer to test an rpc_xprt
for session trunking so as to not leak the rpc_xprt_switch into
the nfs layer.

Search for the address in the rpc_xprt_switch first so as not to
put an unnecessary EXCHANGE_ID on the wire.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Give the NFS layer access to the rpc_xprt_switch_add_xprt function
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Give the NFS layer access to the xprt_switch_put function
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

rpc_task_set_client is only called from rpc_run_task after
rpc_new_task and rpc_task_release_client is not needed as the
task is new.

When called from rpc_new_task, rpc_task_set_client also removed the
assigned rpc_xprt which is not desired.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The variable `err` is not used anywhere and just returns the
predefined value `0` at the end of the function. Hence, remove the
variable and return 0 explicitly.
Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Using NFSv4.1 on RDMA should be safe, so broaden the new checks in
rpc_create().

WARN_ON_ONCE is used, matching most other WARN call sites in clnt.c.

Fixes: 39a9beab ("rpc: share one xps between all backchannels")
Fixes: d50039ea ("nfsd4/rpc: move backchannel create logic...")
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NJ. Bruce Fields <bfields@fieldses.org>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

We don't want to miss a lease period renewal due to the TCP connection
failing to reconnect in a timely fashion. To ensure this doesn't happen,
cap the reconnection timer so that we retry the connection attempt
at least every 1/2 lease period.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

...and ensure that we propagate it to new transports on the same
client.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Fix the report:

net/sunrpc/clnt.c:2580:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The spec allows backchannels for multiple clients to share the same tcp
connection.  When that happens, we need to use the same xprt for all of
them.  Similarly, we need the same xps.

This fixes list corruption introduced by the multipath code.

Cc: stable@vger.kernel.org
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Acked-by: NTrond Myklebust <trondmy@primarydata.com>

Also simplify the logic a bit.

Cc: stable@vger.kernel.org
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Acked-by: NTrond Myklebust <trondmy@primarydata.com>

Callers of rpc_create_xprt expect it to put the xprt on success and
failure.

Cc: stable@vger.kernel.org
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Acked-by: NTrond Myklebust <trondmy@primarydata.com>

RPC-over-RDMA transports have a limit on how large a backward
direction (backchannel) RPC message can be. Ensure that the NFSv4.x
CREATE_SESSION operation advertises this limit to servers.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Add a function to allow creation and addition of a new transport
to an existing rpc_clnt
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Add a helper for tasks that require us to apply a function to all the
transports in an rpc_clnt.
An example of a usecase would be BIND_CONN_TO_SESSION, where we want
to send one RPC call down each transport.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

This is a pre-patch for the RPC multipath code. It sets up the storage in
struct rpc_clnt for the multipath code.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The missing break means that we always return EAFNOSUPPORT when
faced with a request for an IPv6 loopback address.

Reported-by: coverity (CID 401987)
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If we're running out of buffer memory when transmitting data, then
we want to just delay for a moment, and then continue transmitting
the remainder of the message.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If the back channel is disconnected, we can and should just fail the
transmission. The expectation is that the NFSv4.1 server will always
retransmit any outstanding callbacks once the connection is
re-established.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

It has been exceptionally useful to exercise the logic that handles
local immediate errors and RDMA connection loss.  To enable
developers to test this regularly and repeatably, add logic to
simulate connection loss every so often.

Fault injection is disabled by default. It is enabled with

  $ sudo echo xxx > /sys/kernel/debug/sunrpc/inject_fault/disconnect

where "xxx" is a large positive number of transport method calls
before a disconnect. A value of several thousand is usually a good
number that allows reasonable forward progress while still causing a
lot of connection drops.

These hooks are disabled when SUNRPC_DEBUG is turned off.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

RDMA xprts don't have a sock_xprt, but an rdma_xprt, so the
xs_swapper_enable/disable functions will likely oops when fed an RDMA
xprt. Turn these functions into rpc_xprt_ops so that that doesn't
occur. For now the RDMA versions are no-ops that just return -EINVAL
on an attempt to swapon.

Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Split xs_swapper into enable/disable functions and eliminate the
"enable" flag.

Currently, it's racy if you have multiple swapon/swapoff operations
running in parallel over the same xprt. Also fix it so that we only
set it to a memalloc socket on a 0->1 transition and only clear it
on a 1->0 transition.

Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Jerome reported seeing a warning pop when working with a swapfile on
NFS. The nfs_swap_activate can end up calling sk_set_memalloc while
holding the rcu_read_lock and that function can sleep.

To fix that, we need to take a reference to the xprt while holding the
rcu_read_lock, set the socket up for swapping and then drop that
reference. But, xprt_put is not exported and having NFS deal with the
underlying xprt is a bit of layering violation anyway.

Fix this by adding a set of activate/deactivate functions that take a
rpc_clnt pointer instead of an rpc_xprt, and have nfs_swap_activate and
nfs_swap_deactivate call those.

Also, add a per-rpc_clnt atomic counter to keep track of the number of
active swapfiles associated with it. When the counter does a 0->1
transition, we enable swapping on the xprt, when we do a 1->0 transition
we disable swapping on it.

This also allows us to be a bit more selective with the RPC_TASK_SWAPPER
flag. If non-swapper and swapper clnts are sharing a xprt, then we only
need to flag the tasks from the swapper clnt with that flag.
Acked-by: NMel Gorman <mgorman@suse.de>
Reported-by: NJerome Marchand <jmarchan@redhat.com>
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>