- 10 9月, 2014 16 次提交
-
-
由 Daniel Borkmann 提交于
Introduced in commit 314beb9b ("x86: bpf_jit_comp: secure bpf jit against spraying attacks") and later on replicated in aa2d2c73 ("s390/bpf,jit: address randomize and write protect jit code") for s390 architecture, write protection for BPF JIT images got added and a random start address of the JIT code, so that it's not on a page boundary anymore. Since both use a very similar allocator for the BPF binary header, we can consolidate this code into the BPF core as it's mostly JIT independant anyway. This will also allow for future archs that support DEBUG_SET_MODULE_RONX to just reuse instead of reimplementing it. JIT tested on x86_64 and s390x with BPF test suite. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Alexander Duyck reported high false sharing on dst refcount in tcp stack when prequeue is used. prequeue is the mechanism used when a thread is blocked in recvmsg()/read() on a TCP socket, using a blocking model rather than select()/poll()/epoll() non blocking one. We already try to use RCU in input path as much as possible, but we were forced to take a refcount on the dst when skb escaped RCU protected region. When/if the user thread runs on different cpu, dst_release() will then touch dst refcount again. Commit 09316255 (tcp: force a dst refcount when prequeue packet) was an example of a race fix. It turns out the only remaining usage of skb->dst for a packet stored in a TCP socket prequeue is IP early demux. We can add a logic to detect when IP early demux is probably going to use skb->dst. Because we do an optimistic check rather than duplicate existing logic, we need to guard inet_sk_rx_dst_set() and inet6_sk_rx_dst_set() from using a NULL dst. Many thanks to Alexander for providing a nice bug report, git bisection, and reproducer. Tested using Alexander script on a 40Gb NIC, 8 RX queues. Hosts have 24 cores, 48 hyper threads. echo 0 >/proc/sys/net/ipv4/tcp_autocorking for i in `seq 0 47` do for j in `seq 0 2` do netperf -H $DEST -t TCP_STREAM -l 1000 \ -c -C -T $i,$i -P 0 -- \ -m 64 -s 64K -D & done done Before patch : ~6Mpps and ~95% cpu usage on receiver After patch : ~9Mpps and ~35% cpu usage on receiver. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Rothwell 提交于
After merging the wireless-next tree, today's linux-next build (powerpc allyesconfig) failed like this: drivers/net/wireless/ath/ath5k/debug.c: In function 'open_file_eeprom': drivers/net/wireless/ath/ath5k/debug.c:933:2: error: implicit declaration of function 'vmalloc' [-Werror=implicit-function-declaration] buf = vmalloc(eesize); ^ drivers/net/wireless/ath/ath5k/debug.c:933:6: warning: assignment makes pointer from integer without a cast buf = vmalloc(eesize); ^ drivers/net/wireless/ath/ath5k/debug.c:960:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] vfree(buf); ^ Caused by commit db906eb2 ("ath5k: added debugfs file for dumping eeprom"). Also reported by Guenter Roeck. I have used Geert Uytterhoeven's suggested fix of including vmalloc.h and so added this patch for today: From: Stephen Rothwell <sfr@canb.auug.org.au> Date: Mon, 8 Sep 2014 18:39:23 +1000 Subject: [PATCH] ath5k: fix debugfs addition Reported-by: NGuenter Roeck <linux@roeck-us.net> Suggested-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varka Bhadram 提交于
It removes the owner field updation of driver structure. It will be automatically updated by module_platform_driver() Signed-off-by: NVarka Bhadram <varkab@cdac.in> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li RongQing 提交于
Change the date type of error status from u64 to atomic_long_t, and use atomic operation, then remove the lock which is used to protect the error status. The operation of atomic maybe faster than spin lock. Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rami Rosen 提交于
This patch removes an unncessary check in the br_afspec() method of br_netlink.c. Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== bridge: implement rtnl_link options for getting and setting bridge options So far, only sysfs is complete interface for getting and setting bridge options. This patchset follows-up on the similar bonding code and allows userspace to get/set bridge master/port options using Netlink IFLA_INFO_DATA/IFLA_INFO_SLAVE_DATA attr. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Allow rtnetlink users to set bridge master info via IFLA_INFO_DATA attr This initial part implements forward_delay, hello_time, max_age options. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Allow rtnetlink users to get bridge master info in IFLA_INFO_DATA attr This initial part implements forward_delay, hello_time, max_age options. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Allow rtnetlink users to set port info via IFLA_INFO_SLAVE_DATA attr Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Allow rtnetlink users to get port info in IFLA_INFO_SLAVE_DATA attr Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
The thing is that netdev_master_upper_dev_link calls call_netdevice_notifiers(NETDEV_CHANGEUPPER, dev). That generates rtnl link message and during that, rtnl_link_ops->fill_slave_info is called. But with current ordering, rx_handler and IFF_BRIDGE_PORT are not set yet so there would have to be check for that in fill_slave_info callback. Resolve this by reordering to similar what bonding and team does to avoid the check. Also add removal of IFF_BRIDGE_PORT flag into error path. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vincent Bernat 提交于
net.ipv4.ip_nonlocal_bind sysctl was global to all network namespaces. This patch allows to set a different value for each network namespace. Signed-off-by: NVincent Bernat <vincent@bernat.im> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Alexei Starovoitov says: ==================== load imm64 insn and uapi/linux/bpf.h V9->V10 - no changes, added Daniel's ack Note they're on top of Hannes's patch in the same area [1] V8 thread with 'why' reasoning and end goal [2] Original set [3] of ~28 patches I'm planning to present in 4 stages: I. this 2 patches to fork off llvm upstreaming II. bpf syscall with manpage and map implementation III. bpf program load/unload with verifier testsuite (1st user of instruction macros from bpf.h and 1st user of load imm64 insn) IV. tracing, etc [1] http://patchwork.ozlabs.org/patch/385266/ [2] https://lkml.org/lkml/2014/8/27/628 [3] https://lkml.org/lkml/2014/8/26/859 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
allow user space to generate eBPF programs uapi/linux/bpf.h: eBPF instruction set definition linux/filter.h: the rest This patch only moves macro definitions, but practically it freezes existing eBPF instruction set, though new instructions can still be added in the future. These eBPF definitions cannot go into uapi/linux/filter.h, since the names may conflict with existing applications. Full eBPF ISA description is in Documentation/networking/filter.txt Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
add BPF_LD_IMM64 instruction to load 64-bit immediate value into a register. All previous instructions were 8-byte. This is first 16-byte instruction. Two consecutive 'struct bpf_insn' blocks are interpreted as single instruction: insn[0].code = BPF_LD | BPF_DW | BPF_IMM insn[0].dst_reg = destination register insn[0].imm = lower 32-bit insn[1].code = 0 insn[1].imm = upper 32-bit All unused fields must be zero. Classic BPF has similar instruction: BPF_LD | BPF_W | BPF_IMM which loads 32-bit immediate value into a register. x64 JITs it as single 'movabsq %rax, imm64' arm64 may JIT as sequence of four 'movk x0, #imm16, lsl #shift' insn Note that old eBPF programs are binary compatible with new interpreter. It helps eBPF programs load 64-bit constant into a register with one instruction instead of using two registers and 4 instructions: BPF_MOV32_IMM(R1, imm32) BPF_ALU64_IMM(BPF_LSH, R1, 32) BPF_MOV32_IMM(R2, imm32) BPF_ALU64_REG(BPF_OR, R1, R2) User space generated programs will use this instruction to load constants only. To tell kernel that user space needs a pointer the _pseudo_ variant of this instruction may be added later, which will use extra bits of encoding to indicate what type of pointer user space is asking kernel to provide. For example 'off' or 'src_reg' fields can be used for such purpose. src_reg = 1 could mean that user space is asking kernel to validate and load in-kernel map pointer. src_reg = 2 could mean that user space needs readonly data section pointer src_reg = 3 could mean that user space needs a pointer to per-cpu local data All such future pseudo instructions will not be carrying the actual pointer as part of the instruction, but rather will be treated as a request to kernel to provide one. The kernel will verify the request_for_a_pointer, then will drop _pseudo_ marking and will store actual internal pointer inside the instruction, so the end result is the interpreter and JITs never see pseudo BPF_LD_IMM64 insns and only operate on generic BPF_LD_IMM64 that loads 64-bit immediate into a register. User space never operates on direct pointers and verifier can easily recognize request_for_pointer vs other instructions. Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 9月, 2014 6 次提交
-
-
由 David S. Miller 提交于
Merge tag 'master-2014-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-09-08 Please pull this batch of updates intended for the 3.18 stream... For the mac80211 bits, Johannes says: "Not that much content this time. Some RCU cleanups, crypto performance improvements, and various patches all over, rather than listing them one might as well look into the git log instead." For the Bluetooth bits, Gustavo says: "The changes consists of: - Coding style fixes to HCI drivers - Corrupted ack value fix for the H5 HCI driver - A couple of Enhanced L2CAP fixes - Conversion of SMP code to use common L2CAP channel API - Page scan optimizations when using the kernel-side whitelist - Various mac802154 and and ieee802154 6lowpan cleanups - One new Atheros USB ID" For the iwlwifi bits, Emmanuel says: "We have a new big thing coming up which is called Dynamic Queue Allocation (or DQA). This is a completely new way to work with the Tx queues and it requires major refactoring. This is being done by Johannes and Avri. Besides this, Johannes disables U-APSD by default because of APs that would disable A-MPDU if the association supports U-ASPD. Luca contributed to the power area which he was cleaning up on the way while working on CSA. A few more random things here and there." For the Atheros bits, Kalle says: "For ath6kl we had two small fixes and a new SDIO device id. For ath10k the bigger changes are: * support for new firmware version 10.2 (Michal) * spectral scan support (Simon, Sven & Mathias) * export a firmware crash dump file (Ben & me) * cleaning up of pci.c (Michal) * print pci id in all messages, which causes most of the churn (Michal)" Beyond that, we have the usual collection of various updates to ath9k, b43, mwifiex, and wil6210, as well as a few other bits here and there. Please let me know if there are problems! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
inetpeer sequence numbers are no longer incremented, so no need to check and flush the tree. The function that increments the sequence number was already dead code and removed in in "ipv4: remove unused function" (068a6e18). Remove the code that checks for a change, too. Verifying that v4_seq and v6_seq are never incremented and thus that flush_check compares bp->flush_seq to 0 is trivial. The second part of the change removes flush_check completely even though bp->flush_seq is exactly !0 once, at initialization. This change is correct because the time this branch is true is when bp->root == peer_avl_empty_rcu, in which the branch and inetpeer_invalidate_tree are a NOOP. Signed-off-by: NWillem de Bruijn <willemb@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
CPSW supports both rx and tx pause frames for flow control. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rick Jones 提交于
A bit of floor sweeping in a dusty old corner. Convert the "normal" skb free calls to dev_consume_skb_any() so packet drop tracing will be more sane. Signed-off-by: NRick Jones <rick.jones2@hp.com> Acked-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
GRE assumes that the GRE header is at skb_network_header + ip_hrdlen(skb). It is more general to use skb_transport_header and this allows the possbility of inserting additional header between IP and GRE (which is what we will done in Generic UDP Encapsulation for GRE). Signed-off-by: NTom Herbert <therbert@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change makes it so that dp83640_remove can use skb_queue_purge instead of looping through itself to flush any entries out of the queue. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 9月, 2014 18 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: "This pull request includes Alban's patch to disallow '\n' in cgroup names. Two other patches from Li to fix a possible oops when cgroup destruction races against other file operations and one from Vivek to fix a unified hierarchy devel behavior" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: check cgroup liveliness before unbreaking kernfs cgroup: delay the clearing of cgrp->kn->priv cgroup: Display legacy cgroup files on default hierarchy cgroup: reject cgroup names with '\n'
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
Pull percpu fixes from Tejun Heo: "One patch to fix a failure path in the alloc path. The bug is dangerous but probably not too likely to actually trigger in the wild given that there hasn't been any report yet. The other two are low impact fixes" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: free percpu allocation info for uniprocessor system percpu: perform tlb flush after pcpu_map_pages() failure percpu: fix pcpu_alloc_pages() failure path
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "Two patches are to add PCI IDs for ICH9 and all others are device specific fixes. Nothing too interesting" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver. ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware. ahci: add pcid for Marvel 0x9182 controller ata: Disabling the async PM for JMicron chip 363/361 ata_piix: Add Device IDs for Intel 9 Series PCH ahci: Add Device IDs for Intel 9 Series PCH ata: ahci_tegra: Read calibration fuse
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix skb leak in mac802154, from Martin Townsend 2) Use select not depends on NF_NAT for NFT_NAT, from Pablo Neira Ayuso 3) Fix union initializer bogosity in vxlan, from Gerhard Stenzel 4) Fix RX checksum configuration in stmmac driver, from Giuseppe CAVALLARO 5) Fix TSO with non-accelerated VLANs in e1000, e1000e, bna, ehea, i40e, i40evf, mvneta, and qlge, from Vlad Yasevich 6) Fix capability checks in phy_init_eee(), from Giuseppe CAVALLARO 7) Try high order allocations more sanely for SKBs, specifically if a high order allocation fails, fall back directly to zero order pages rather than iterating down one order at a time. From Eric Dumazet 8) Fix a memory leak in openvswitch, from Li RongQing 9) amd-xgbe initializes wrong spinlock, from Thomas Lendacky 10) RTNL locking was busted in setsockopt for anycast and multicast, fix from Sabrina Dubroca 11) Fix peer address refcount leak in ipv6, from Nicolas Dichtel 12) DocBook typo fixes, from Masanari Iida * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits) ipv6: restore the behavior of ipv6_sock_ac_drop() amd-xgbe: Enable interrupts for all management counters amd-xgbe: Treat certain counter registers as 64 bit greth: moved TX ring cleaning to NAPI rx poll func cnic : Cleanup CONFIG_IPV6 & VLAN check net: treewide: Fix typo found in DocBook/networking.xml bnx2x: Fix link problems for 1G SFP RJ45 module 3c59x: avoid panic in boomerang_start_xmit when finding page address: netfilter: add explicit Kconfig for NETFILTER_XT_NAT ipv6: use addrconf_get_prefix_route() to remove peer addr ipv6: fix a refcnt leak with peer addr net-timestamp: only report sw timestamp if reporting bit is set drivers/net/fddi/skfp/h/skfbi.h: Remove useless PCI_BASE_2ND macros l2tp: fix race while getting PMTU on PPP pseudo-wire ipv6: fix rtnl locking in setsockopt for anycast and multicast VMXNET3: Check for map error in vmxnet3_set_mc openvswitch: distinguish between the dropped and consumed skb amd-xgbe: Fix initialization of the wrong spin lock openvswitch: fix a memory leak netfilter: fix missing dependencies in NETFILTER_XT_TARGET_LOG ...
-
由 Beniamino Galvani 提交于
The mdio-sun4i driver automatically selects REGULATOR and REGULATOR_FIXED_VOLTAGE because it uses the regulator API. But a driver selecting a subsystem increases the chance of generating circular Kconfig dependencies, especially when other drivers depend on the selected symbol. Since the regulator API functions are replaced with no-ops when REGULATOR is disabled, the driver can be built successfully even without regulator support and so those 'select' dependencies can be safely dropped. Suggested-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBeniamino Galvani <b.galvani@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless由 David S. Miller 提交于
John W. Linville says: ==================== pull request: wireless 2014-09-05 Please pull this batch of fixes intended for the 3.17 stream... For the mac80211 bits, Johannes says: "Here are a few fixes for mac80211. One has been discussed for a while and adds a terminating NUL-byte to the alpha2 sent to userspace, which shouldn't be necessary but since many places treat it as a string we couldn't move to just sending two bytes. In addition to that, we have two VLAN fixes from Felix, a mesh fix, a fix for the recently introduced RX aggregation offload, a revert for a broken patch (that luckily didn't really cause any harm) and a small fix for alignment in debugfs." For the iwlwifi bits, Emmanuel says: "I revert a patch that disabled CTS to self in dvm because users reported issues. The revert is CCed to stable since the offending patch was sent to stable too. I also bump the firmware API versions since a new firmware is coming up. On top of that, Marcel fixes a bug I introduced while fixing a bug in our Kconfig file." Please let me know if there are problems! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
It is possible that the interface is already gone after joining the list of anycast on this interface as we don't hold a refcount for the device, in this case we are safe to ignore the error. What's more important, for API compatibility we should not change this behavior for applications even if it were correct. Fixes: commit a9ed4a29 ("ipv6: fix rtnl locking in setsockopt for anycast and multicast") Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
由 Andy Shevchenko 提交于
Instead of dereference each byte let's use %*ph specifier in the printk() calls. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sudip Mukherjee 提交于
new link for - How to piss off a Linux kernel subsystem maintainer Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Bolle 提交于
The NFS/RDMA Kconfig symbol was split into separate options for client and server in commit 2e8c12e1 ("xprtrdma: add separate Kconfig options for NFSoRDMA client and server support"). Update the documentation to reflect this split. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: "J. Bruce Fields" <bfields@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Masanari Iida 提交于
hpfall.c was renamed to freefall.c in 3.16, but this file still refer to hpfall.c instead of freefall.c Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
The example code provided with the i2c device interface documentation won't compile since it uses the reserved word "register" to name a variable. The compiler fails with this error message: error: expected identifier or '(' before '=' token __u8 register = 0x20; /* Device register to access */ ^ Rename the variable "register" to simply "reg" in the example code. Another couple of typos has been fixed as well. [Change "! =" to "!=".] Signed-off-by: NJose Alarcon Roldan <jose.alarcon.roldan@gmail.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Acked-by: NWolfram Sang <wsa@the-dreams.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rob Jones 提交于
Despite the fact that these functions have been around for years, they are little used (only 15 uses in 13 files at the preseht time) even though many other files use work-arounds to achieve the same result. By documenting them, hopefully they will become more widely used. Signed-off-by: NRob Jones <rob.jones@codethink.co.uk> Acked-by: NSteven Whitehouse <swhiteho@redhat.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from Rafael Wysocki: "These are regression fixes (ACPI sysfs, ACPI video, suspend test), ACPI cpuidle deadlock fix, missing runtime validation of ACPI _DSD output, a fix and a new CPU ID for the RAPL driver, new blacklist entry for the ACPI EC driver and a couple of trivial cleanups (intel_pstate and generic PM domains). Specifics: - Fix for recently broken test_suspend= command line argument (Rafael Wysocki). - Fixes for regressions related to the ACPI video driver caused by switching the default to native backlight handling in 3.16 from Hans de Goede. - Fix for a sysfs attribute of ACPI device objects that returns stale values sometimes due to the fact that they are cached instead of executing the appropriate method (_SUN) every time (broken in 3.14). From Yasuaki Ishimatsu. - Fix for a deadlock between cpuidle_lock and cpu_hotplug.lock in the ACPI processor driver from Jiri Kosina. - Runtime output validation for the ACPI _DSD device configuration object missing from the support for it that has been introduced recently. From Mika Westerberg. - Fix for an unuseful and misleading RAPL (Running Average Power Limit) domain detection message in the RAPL driver from Jacob Pan. - New Intel Haswell CPU ID for the RAPL driver from Jason Baron. - New Clevo W350etq blacklist entry for the ACPI EC driver from Lan Tianyu. - Cleanup for the intel_pstate driver and the core generic PM domains code from Gabriele Mazzotta and Geert Uytterhoeven" * tag 'pm+acpi-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock ACPI / scan: not cache _SUN value in struct acpi_device_pnp cpufreq: intel_pstate: Remove unneeded variable powercap / RAPL: change domain detection message powercap / RAPL: add support for CPU model 0x3f PM / domains: Make generic_pm_domain.name const PM / sleep: Fix test_suspend= command line option ACPI / EC: Add msi quirk for Clevo W350etq ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC ACPI / video: Add a disable_native_backlight quirk ACPI / video: Fix use_native_backlight selection logic ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package.
-
由 Tom Lendacky 提交于
A previous patch inadvertently deleted a declaration in the amd_xgbe_an_tx_training function causing the build to fail. Add the declaration for 'priv' back to the function. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>