The pxa-ssp driver currently assumes that .set_fmt() is called before
.set_clkdiv(), .set_pll() etc.

Commit a8bd0ee5 ("ASoC: raumfeld: Use static DAI format setup") broke
support for Raumfeld hardware (and possible other PXA based ones) because
it effectively changed the order of these calls. Also, as the call to
.set_fmt() is now done at probe time, the port clock is not yet enabled.

To fix this, strip all hardware register access code from the .set_fmt()
callback and memorize the desired value, so we can use it from the
.hw_params() callback. Also make the .set_fmt() callback less destructive
by reading all registers that it writes to in the beginning and only
masking out the bits that it possibly fiddles with.
Signed-off-by: NDaniel Mack <daniel@zonque.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to DB820c machine driver.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add devicetree bindings documentation file for Qualcomm apq8096 sound card.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to q6asm dai driver which configures Q6ASM streams
to pass pcm data.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to q6afe backend dais driver.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch add support to MI2S mixers required to select path between
ASM stream and AFE ports.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to SLIMBus related mixers to control mux between
ASM stream and AFE port.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to q6 routing driver which configures route
between ASM and AFE module using ADM apis.

This driver uses dapm widgets to setup the matrix between AFE ports and
ASM streams.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to open, write and media format commands
in the q6asm module.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to memory map and unmap regions commands in
q6asm module.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds basic support to Q6 ASM (Audio Stream Manager) module on
Q6DSP. ASM supports up to 8 concurrent streams. each stream can be setup
as playback/capture. ASM provides top control functions like
Pause/flush/resume for playback and record. ASM can Create/destroy encoder,
decoder and also provides POPP dynamic services.

This patch adds support to basic features to allow hdmi playback.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to Q6ADM (Audio Device Manager) module in
q6dsp. ADM performs routing between audio streams and AFE ports.
It does Rate matching for streams going to devices driven by
different clocks, it handles volume ramping, Mixing with channel
and bit-width. ADM creates and destroys dynamic COPP services
for device-related audio processing as needed.

This patch adds basic support to ADM.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

With in ACP, There are three I2S controllers can be
configured/enabled ( I2S SP, I2S MICSP, I2S BT).
Default enabled I2S controller instance is I2S SP.
This patch provides required changes to support I2S BT
controller Instance.
Signed-off-by: NVijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Marking snd_soc_ops instances const
Signed-off-by: NAkshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: NVijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

System clock on the platform is 25Mhz and not 24Mhz.

PLL_OUT for da7219 codec to use DA7219_PLL_FREQ_OUT_98304
as it is for 48KHz SR.
Signed-off-by: NAkshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: NVijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

hw_param can be called multiple times and thus we can have
more clk enable. The clk may not get diabled due to refcounting.
startup/shutdown ensures single clk enable/disable call.
Signed-off-by: NAkshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: NVijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

rtd structure freed early may result in kernel panic in dma close
call back. moved releasing memory for rtd structure to the end of
dma close callback.
Signed-off-by: NVijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Added sram bank variable to audio_substream_data structure.
Signed-off-by: NVijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Added pte offset variable in audio_substream_data structure.
Added Stoney related PTE offset macros in acp header file.
Modified hw_params callback to assign the pte offset value
based on asic_type.
PTE Offset macros used to calculate no of PTE entries
need to be programmed when memory allocated for audio buffer.
Depending upon allocated audio buffer size, PTE offset values
will change.
Compared to CZ, Stoney has SRAM memory limitation i.e 48k
It is required to define separate PTE Offset macros for
Stoney.
Signed-off-by: NVijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to LPASS Bit clock, LPASS Digital
core clock and OSR clock. These clocks are required for both
MI2S and PCM setup.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to 4 MI2S ports on LPASS.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to 6 SLIMBus AFE ports, which are used as
backend dais.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to Q6AFE (Audio Front End) module on Q6DSP.

AFE module sits right at the other end of cpu where the codec/audio
devices are connected.

AFE provides abstraced interfaces to both hardware and virtual devices.
Each AFE tx/rx port can be configured to connect to one of the hardware
devices like codec, hdmi, slimbus, i2s and so on. AFE services include
starting, stopping, and if needed, any configurations of the ports.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Reviewed-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Log the correct error code in case the .open() call to a component fails.
Signed-off-by: NDaniel Mack <daniel@zonque.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Currently the 'big-endian' property is listed as required, which is
not correct. i.MX SoCs do not need such property, so move it under
'Optional properties' entry instead.

Also, fsl-sai.txt incorrectly referenced 'FTM_PWM registers', so
change it to 'SAI registers', which is the intended description.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Trivial fix to spelling mistake in snprintf literal string
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

HID is assumed to be made of TI PCI ID (0x104C) + part number, so all
four 104C5121, 104C5122, 104C5141 104C5142 are valid.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

There is no platform code that uses i2c module table.
Remove it altogether and adjust ->probe() to be ->probe_new().
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Make C-header and SPDX-License-Identifier header uniform.
Signed-off-by: NMarco Felsch <m.felsch@pengutronix.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

Trivial fix to spelling mistakes in SND_SOC_BYTES literal strings
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Trivial fix to spelling mistake in SOC_ENUM literal string
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Removed invalid msg_type check.
This also fixes below static checker warning:
apr.c:95:35: warning: comparison is always true due to limited range of
 data type [-Wtype-limits]
warn: always true condition '(msg_type != 69864) => (0-u16max != 69864)'
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Set PR-38 register to 0x1fe1 will make PLL function more stable.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The ssm2305 is a simple Class-D audio amplifier. A application can
turn on/off the device by a gpio. It's also possible to hardwire the
shutdown pin.

Tested on a i.MX6 based custom board.
Signed-off-by: NMarco Felsch <m.felsch@pengutronix.de>
Reviewed-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds support to core apr service, which is used to query
status of other static and dynamic services on the dsp.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: NRohit kumar <rohitkr@codeaurora.org>
Acked-by: NBanajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: NPravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

As a side effect of the following commit, the active TX
serializer may get disabled which may result in distorted
audio output.

ASoC: davinci-mcasp: Add support for multichannel playback
(2952b27e)

For example, if a 4 channel I2S playback with two TX serializers
is activated. Later on, if a recording of 2 channels, with only 1 RX
serializer is started, which will also disable one of the TX
serializer because max_active_serializers is only calculated for
RX (recording) stream. This patch fixes this issue.
Signed-off-by: NVishal Thanki <vishalthanki@gmail.com>
Acked-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Many X86 devices using a BYT SoC + RT5640 codec are cheap devices with
generic DMI strings, causing snd_soc_set_dmi_name() to fail to set a
long_name, making it impossible for userspace to have a correct UCM
profile which only uses inputs / outputs which are actually hooked up
on the device.

Our quirks already specify which input the internal mic is connected to
and if a single (mono) speaker is used or if the device has stereo
speakers.

This commit sets a long_name based on the quirks so that userspace can
have UCM profiles doing the right thing based on the long_name.

Note that if we ever encounter the need for a special UCM profile for
some device we can add a quirk to set a specific long_name for the
device,
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Even with our recently tweaked defaults, quite a few bytcr_rt5640 devices
still need quirks to be fully functional. This commits adds quirks where
necessary for the 16 bytcr_rt5640 devices I have access to.

The quirks are added for the following reasons:

1) Devices with only one speaker need the mono quirk to avoid driving an
unused and potentially short-circuited output. 8 of my sample of 16 devs
are mono, 4 of these would work with the defaults if it were not for their
mono speaker.

2) Devices using a different input for the internal mic then the default,
this is the case for 6 of my sample of 16 devices.

3) BYTCR devices without an ACPI channel map, which do not work with the
default of SSP0-AIF2, this is the case for 2 of my sample of 16 devices.

4) Devices which need non-default jack-detect settings, this is the case
for 6 of my sample of 16 devices.

This commit add quirks for the following devices:

Acer Iconia Tab 8 W1-810
Chuwi Vi8
HP Pavilion X2 10-n000nd
HP Stream 7
I.T. Works TW891
Lamina I8270
MSI S100
Pipo W4
PoV-mobii-800w (v2.0)
PoV-mobii-800w (v2.1)
Toshiba Click Mini L9W-B
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Use dmi_first_match() instead of dmi_check_system() + callbacks, this
avoid the need to initialize dmi_system_id.callback for each
byt_rt5640_quirk_table entry.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>