A later patch will introduce a BPF_MAP_TYPE_REUSEPORT_ARRAY which
allows a SO_REUSEPORT sk to be added to a bpf map.  When a sk
is removed from reuse->socks[], it also needs to be removed from
the bpf map.  Also, when adding a sk to a bpf map, the bpf
map needs to ensure it is indeed in a reuse->socks[].
Hence, reuseport_lock is needed by the bpf map to ensure its
map_update_elem() and map_delete_elem() operations are in-sync with
the reuse->socks[].  The BPF_MAP_TYPE_REUSEPORT_ARRAY map will only
acquire the reuseport_lock after ensuring the adding sk is already
in a reuseport group (i.e. reuse->socks[]).  The map_lookup_elem()
will be lockless.

This patch also adds an ID to sock_reuseport.  A later patch
will introduce BPF_PROG_TYPE_SK_REUSEPORT which allows
a bpf prog to select a sk from a bpf map.  It is inflexible to
statically enforce a bpf map can only contain the sk belonging to
a particular reuse->socks[] (i.e. same IP:PORT) during the bpf
verification time. For example, think about the the map-in-map situation
where the inner map can be dynamically changed in runtime and the outer
map may have inner maps belonging to different reuseport groups.
Hence, when the bpf prog (in the new BPF_PROG_TYPE_SK_REUSEPORT
type) selects a sk,  this selected sk has to be checked to ensure it
belongs to the requesting reuseport group (i.e. the group serving
that IP:PORT).

The "sk->sk_reuseport_cb" pointer cannot be used for this checking
purpose because the pointer value will change after reuseport_grow().
Instead of saving all checking conditions like the ones
preced calling "reuseport_add_sock()" and compare them everytime a
bpf_prog is run, a 32bits ID is introduced to survive the
reuseport_grow().  The ID is only acquired if any of the
reuse->socks[] is added to the newly introduced
"BPF_MAP_TYPE_REUSEPORT_ARRAY" map.

If "BPF_MAP_TYPE_REUSEPORT_ARRAY" is not used,  the changes in this
patch is a no-op.
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Although the actual cookie check "__cookie_v[46]_check()" does
not involve sk specific info, it checks whether the sk has recent
synq overflow event in "tcp_synq_no_recent_overflow()".  The
tcp_sk(sk)->rx_opt.ts_recent_stamp is updated every second
when it has sent out a syncookie (through "tcp_synq_overflow()").

The above per sk "recent synq overflow event timestamp" works well
for non SO_REUSEPORT use case.  However, it may cause random
connection request reject/discard when SO_REUSEPORT is used with
syncookie because it fails the "tcp_synq_no_recent_overflow()"
test.

When SO_REUSEPORT is used, it usually has multiple listening
socks serving TCP connection requests destinated to the same local IP:PORT.
There are cases that the TCP-ACK-COOKIE may not be received
by the same sk that sent out the syncookie.  For example,
if reuse->socks[] began with {sk0, sk1},
1) sk1 sent out syncookies and tcp_sk(sk1)->rx_opt.ts_recent_stamp
   was updated.
2) the reuse->socks[] became {sk1, sk2} later.  e.g. sk0 was first closed
   and then sk2 was added.  Here, sk2 does not have ts_recent_stamp set.
   There are other ordering that will trigger the similar situation
   below but the idea is the same.
3) When the TCP-ACK-COOKIE comes back, sk2 was selected.
   "tcp_synq_no_recent_overflow(sk2)" returns true. In this case,
   all syncookies sent by sk1 will be handled (and rejected)
   by sk2 while sk1 is still alive.

The userspace may create and remove listening SO_REUSEPORT sockets
as it sees fit.  E.g. Adding new thread (and SO_REUSEPORT sock) to handle
incoming requests, old process stopping and new process starting...etc.
With or without SO_ATTACH_REUSEPORT_[CB]BPF,
the sockets leaving and joining a reuseport group makes picking
the same sk to check the syncookie very difficult (if not impossible).

The later patches will allow bpf prog more flexibility in deciding
where a sk should be located in a bpf map and selecting a particular
SO_REUSEPORT sock as it sees fit.  e.g. Without closing any sock,
replace the whole bpf reuseport_array in one map_update() by using
map-in-map.  Getting the syncookie check working smoothly across
socks in the same "reuse->socks[]" is important.

A partial solution is to set the newly added sk's ts_recent_stamp
to the max ts_recent_stamp of a reuseport group but that will require
to iterate through reuse->socks[]  OR
pessimistically set it to "now - TCP_SYNCOOKIE_VALID" when a sk is
joining a reuseport group.  However, neither of them will solve the
existing sk getting moved around the reuse->socks[] and that
sk may not have ts_recent_stamp updated, unlikely under continuous
synflood but not impossible.

This patch opts to treat the reuseport group as a whole when
considering the last synq overflow timestamp since
they are serving the same IP:PORT from the userspace
(and BPF program) perspective.

"synq_overflow_ts" is added to "struct sock_reuseport".
The tcp_synq_overflow() and tcp_synq_no_recent_overflow()
will update/check reuse->synq_overflow_ts if the sk is
in a reuseport group.  Similar to the reuseport decision in
__inet_lookup_listener(), both sk->sk_reuseport and
sk->sk_reuseport_cb are tested for SO_REUSEPORT usage.
Update on "synq_overflow_ts" happens at roughly once
every second.

A synflood test was done with a 16 rx-queues and 16 reuseport sockets.
No meaningful performance change is observed.  Before and
after the change is ~9Mpps in IPv4.

Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Yonghong Song says:

====================
Commit a26ca7c9 ("bpf: btf: Add pretty print support to
the basic arraymap") added pretty print support to array map.
This patch adds pretty print for hash and lru_hash maps.

The following example shows the pretty-print result of a pinned
hashmap. Without this patch set, user will get an error instead.

    struct map_value {
            int count_a;
            int count_b;
    };

    cat /sys/fs/bpf/pinned_hash_map:

    87907: {87907,87908}
    57354: {37354,57355}
    76625: {76625,76626}
    ...

Patch #1 fixed a bug in bpffs map_seq_next() function so that
all elements in the hash table will be traversed.
Patch #2 implemented map_seq_show_elem() and map_check_btf()
callback functions for hash and lru hash maps.
Patch #3 enhanced tools/testing/selftests/bpf/test_btf.c to
test bpffs hash and lru hash map pretty print.
====================
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Pretty print tests for hash/lru_hash maps are added in test_btf.c.
The btf type blob is the same as pretty print array map test.
The test result:
  $ mount -t bpf bpf /sys/fs/bpf
  $ ./test_btf -p
    BTF pretty print array......OK
    BTF pretty print hash......OK
    BTF pretty print lru hash......OK
    PASS:3 SKIP:0 FAIL:0
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Commit a26ca7c9 ("bpf: btf: Add pretty print support to
the basic arraymap") added pretty print support to array map.
This patch adds pretty print for hash and lru_hash maps.
The following example shows the pretty-print result of
a pinned hashmap:

    struct map_value {
            int count_a;
            int count_b;
    };

    cat /sys/fs/bpf/pinned_hash_map:

    87907: {87907,87908}
    57354: {37354,57355}
    76625: {76625,76626}
    ...
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

In function map_seq_next() of kernel/bpf/inode.c,
the first key will be the "0" regardless of the map type.
This works for array. But for hash type, if it happens
key "0" is in the map, the bpffs map show will miss
some items if the key "0" is not the first element of
the first bucket.

This patch fixed the issue by guaranteeing to get
the first element, if the seq_show is just started,
by passing NULL pointer key to map_get_next_key() callback.
This way, no missing elements will occur for
bpffs hash table show even if key "0" is in the map.

Fixes: a26ca7c9 ("bpf: btf: Add pretty print support to the basic arraymap")
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Toshiaki Makita says:

====================
This patch set introduces driver XDP for veth.
Basically this is used in conjunction with redirect action of another XDP
program.

  NIC -----------> veth===veth
 (XDP) (redirect)        (XDP)

In this case xdp_frame can be forwarded to the peer veth without
modification, so we can expect far better performance than generic XDP.

Envisioned use-cases
--------------------

* Container managed XDP program
Container host redirects frames to containers by XDP redirect action, and
privileged containers can deploy their own XDP programs.

* XDP program cascading
Two or more XDP programs can be called for each packet by redirecting
xdp frames to veth.

* Internal interface for an XDP bridge
When using XDP redirection to create a virtual bridge, veth can be used
to create an internal interface for the bridge.

Implementation
--------------

This changeset is making use of NAPI to implement ndo_xdp_xmit and
XDP_TX/REDIRECT. This is mainly because XDP heavily relies on NAPI
context.
 - patch 1: Export a function needed for veth XDP.
 - patch 2-3: Basic implementation of veth XDP.
 - patch 4-6: Add ndo_xdp_xmit.
 - patch 7-9: Add XDP_TX and XDP_REDIRECT.
 - patch 10: Performance optimization for multi-queue env.

Tests and performance numbers
-----------------------------

Tested with a simple XDP program which only redirects packets between
NIC and veth. I used i40e 25G NIC (XXV710) for the physical NIC. The
server has 20 of Xeon Silver 2.20 GHz cores.

  pktgen --(wire)--> XXV710 (i40e) <--(XDP redirect)--> veth===veth (XDP)

The rightmost veth loads XDP progs and just does DROP or TX. The number
of packets is measured in the XDP progs. The leftmost pktgen sends
packets at 37.1 Mpps (almost 25G wire speed).

veth XDP action    Flows    Mpps
================================
DROP                   1    10.6
DROP                   2    21.2
DROP                 100    36.0
TX                     1     5.0
TX                     2    10.0
TX                   100    31.0

I also measured netperf TCP_STREAM but was not so great performance due
to lack of tx/rx checksum offload and TSO, etc.

  netperf <--(wire)--> XXV710 (i40e) <--(XDP redirect)--> veth===veth (XDP PASS)

Direction         Flows   Gbps
==============================
external->veth        1   20.8
external->veth        2   23.5
external->veth      100   23.6
veth->external        1    9.0
veth->external        2   17.8
veth->external      100   22.9

Also tested doing ifup/down or load/unload a XDP program repeatedly
during processing XDP packets in order to check if enabling/disabling
NAPI is working as expected, and found no problems.

v8:
- Don't use xdp_frame pointer address to calculate skb->head, headroom,
  and xdp_buff.data_hard_start.

v7:
- Introduce xdp_scrub_frame() to clear kernel pointers in xdp_frame and
  use it instead of memset().

v6:
- Check skb->len only if reallocation is needed.
- Add __GFP_NOWARN to alloc_page() since it can be triggered by external
  events.
- Fix sparse warning around EXPORT_SYMBOL.

v5:
- Fix broken SOBs.

v4:
- Don't adjust MTU automatically.
- Skip peer IFF_UP check on .ndo_xdp_xmit() because it is unnecessary.
  Add comments to explain that.
- Use redirect_info instead of xdp_mem_info for storing no_direct flag
  to avoid per packet copy cost.

v3:
- Drop skb bulk xmit patch since it makes little performance
  difference. The hotspot in TCP skb xmit at this point is checksum
  computation in skb_segment and packet copy on XDP_REDIRECT due to
  cloned/nonlinear skb.
- Fix race on closing device.
- Add extack messages in ndo_bpf.

v2:
- Squash NAPI patch with "Add driver XDP" patch.
- Remove conversion from xdp_frame to skb when NAPI is not enabled.
- Introduce per-queue XDP ring (patch 8).
- Introduce bulk skb xmit when XDP is enabled on the peer (patch 9).
====================
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Move XDP and napi related fields from veth_priv to newly created veth_rq
structure.

When xdp_frames are enqueued from ndo_xdp_xmit and XDP_TX, rxq is
selected by current cpu.

When skbs are enqueued from the peer device, rxq is one to one mapping
of its peer txq. This way we have a restriction that the number of rxqs
must not less than the number of peer txqs, but leave the possibility to
achieve bulk skb xmit in the future because txq lock would make it
possible to remove rxq ptr_ring lock.

v3:
- Add extack messages.
- Fix array overrun in veth_xmit.
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This allows further redirection of xdp_frames like

 NIC   -> veth--veth -> veth--veth
 (XDP)          (XDP)         (XDP)

The intermediate XDP, redirecting packets from NIC to the other veth,
reuses xdp_mem_info from NIC so that page recycling of the NIC works on
the destination veth's XDP.
In this way return_frame is not fully guarded by NAPI, since another
NAPI handler on another cpu may use the same xdp_mem_info concurrently.
Thus disable napi_direct by xdp_set_return_frame_no_direct() during the
NAPI context.

v8:
- Don't use xdp_frame pointer address for data_hard_start of xdp_buff.

v4:
- Use xdp_[set|clear]_return_frame_no_direct() instead of a flag in
  xdp_mem_info.

v3:
- Fix double free when veth_xdp_tx() returns a positive value.
- Convert xdp_xmit and xdp_redir variables into flags.
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

We need some mechanism to disable napi_direct on calling
xdp_return_frame_rx_napi() from some context.
When veth gets support of XDP_REDIRECT, it will redirects packets which
are redirected from other devices. On redirection veth will reuse
xdp_mem_info of the redirection source device to make return_frame work.
But in this case .ndo_xdp_xmit() called from veth redirection uses
xdp_mem_info which is not guarded by NAPI, because the .ndo_xdp_xmit()
is not called directly from the rxq which owns the xdp_mem_info.

This approach introduces a flag in bpf_redirect_info to indicate that
napi_direct should be disabled even when _rx_napi variant is used as
well as helper functions to use it.

A NAPI handler who wants to use this flag needs to call
xdp_set_return_frame_no_direct() before processing packets, and call
xdp_clear_return_frame_no_direct() after xdp_do_flush_map() before
exiting NAPI.

v4:
- Use bpf_redirect_info for storing the flag instead of xdp_mem_info to
  avoid per-frame copy cost.
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

We are going to add kern_flags field in redirect_info for kernel
internal use.
In order to avoid function call to access the flags, make redirect_info
accessible from modules. Also as it is now non-static, add prefix bpf_
to redirect_info.

v6:
- Fix sparse warning around EXPORT_SYMBOL.
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This allows NIC's XDP to redirect packets to veth. The destination veth
device enqueues redirected packets to the napi ring of its peer, then
they are processed by XDP on its peer veth device.
This can be thought as calling another XDP program by XDP program using
REDIRECT, when the peer enables driver XDP.

Note that when the peer veth device does not set driver xdp, redirected
packets will be dropped because the peer is not ready for NAPI.

v4:
- Don't use xdp_ok_fwd_dev() because checking IFF_UP is not necessary.
  Add comments about it and check only MTU.

v2:
- Drop the part converting xdp_frame into skb when XDP is not enabled.
- Implement bulk interface of ndo_xdp_xmit.
- Implement XDP_XMIT_FLUSH bit and drop ndo_xdp_flush.
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This is preparation for XDP TX and ndo_xdp_xmit.
This allows napi handler to handle xdp_frames through xdp ring as well
as sk_buff.

v8:
- Don't use xdp_frame pointer address to calculate skb->head and
  headroom.

v7:
- Use xdp_scrub_frame() instead of memset().

v3:
- Revert v2 change around rings and use a flag to differentiate skb and
  xdp_frame, since bulk skb xmit makes little performance difference
  for now.

v2:
- Use another ring instead of using flag to differentiate skb and
  xdp_frame. This approach makes bulk skb transmit possible in
  veth_xmit later.
- Clear xdp_frame feilds in skb->head.
- Implement adjust_tail.
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

xdp_frame has kernel pointers which should not be readable from bpf
programs. When we want to reuse xdp_frame region but it may be read by
bpf programs later, we can use this helper to clear kernel pointers.
This is more efficient than calling memset() for the entire struct.
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Oversized packets including GSO packets can be dropped if XDP is
enabled on receiver side, so don't send such packets from peer.

Drop TSO and SCTP fragmentation features so that veth devices themselves
segment packets with XDP enabled. Also cap MTU accordingly.

v4:
- Don't auto-adjust MTU but cap max MTU.
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This is the basic implementation of veth driver XDP.

Incoming packets are sent from the peer veth device in the form of skb,
so this is generally doing the same thing as generic XDP.

This itself is not so useful, but a starting point to implement other
useful veth XDP features like TX and REDIRECT.

This introduces NAPI when XDP is enabled, because XDP is now heavily
relies on NAPI context. Use ptr_ring to emulate NIC ring. Tx function
enqueues packets to the ring and peer NAPI handler drains the ring.

Currently only one ring is allocated for each veth device, so it does
not scale on multiqueue env. This can be resolved by allocating rings
on the per-queue basis later.

Note that NAPI is not used but netif_rx is used when XDP is not loaded,
so this does not change the default behaviour.

v6:
- Check skb->len only when allocation is needed.
- Add __GFP_NOWARN to alloc_page() as it can be triggered by external
  events.

v3:
- Fix race on closing the device.
- Add extack messages in ndo_bpf.

v2:
- Squashed with the patch adding NAPI.
- Implement adjust_tail.
- Don't acquire consumer lock because it is guarded by NAPI.
- Make poll_controller noop since it is unnecessary.
- Register rxq_info on enabling XDP rather than on opening the device.
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This is needed for veth XDP which does skb_copy_expand()-like operation.

v2:
- Drop skb_copy_header part because it has already been exported now.
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Jesper Dangaard Brouer says:

====================
Background: cpumap moves the SKB allocation out of the driver code,
and instead allocate it on the remote CPU, and invokes the regular
kernel network stack with the newly allocated SKB.

The idea behind the XDP CPU redirect feature, is to use XDP as a
load-balancer step in-front of regular kernel network stack.  But the
current sample code does not provide a good example of this.  Part of
the reason is that, I have implemented this as part of Suricata XDP
load-balancer.

Given this is the most frequent feature request I get.  This patchset
implement the same XDP load-balancing as Suricata does, which is a
symmetric hash based on the IP-pairs + L4-protocol.

The expected setup for the use-case is to reduce the number of NIC RX
queues via ethtool (as XDP can handle more per core), and via
smp_affinity assign these RX queues to a set of CPUs, which will be
handling RX packets.  The CPUs that runs the regular network stack is
supplied to the sample xdp_redirect_cpu tool by specifying
the --cpu option multiple times on the cmdline.

I do note that cpumap SKB creation is not feature complete yet, and
more work is coming.  E.g. given GRO is not implemented yet, do expect
TCP workloads to be slower.  My measurements do indicate UDP workloads
are faster.
====================
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This implement XDP CPU redirection load-balancing across available
CPUs, based on the hashing IP-pairs + L4-protocol.  This equivalent to
xdp-cpu-redirect feature in Suricata, which is inspired by the
Suricata 'ippair' hashing code.

An important property is that the hashing is flow symmetric, meaning
that if the source and destination gets swapped then the selected CPU
will remain the same.  This is helps locality by placing both directions
of a flows on the same CPU, in a forwarding/routing scenario.

The hashing INITVAL (15485863 the 10^6th prime number) was fairly
arbitrary choosen, but experiments with kernel tree pktgen scripts
(pktgen_sample04_many_flows.sh +pktgen_sample05_flow_per_thread.sh)
showed this improved the distribution.

This patch also change the default loaded XDP program to be this
load-balancer.  As based on different user feedback, this seems to be
the expected behavior of the sample xdp_redirect_cpu.

Link: https://github.com/OISF/suricata/commit/796ec08dd7a63Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Adjusted function call API to take an initval. This allow the API
user to set the initial value, as a seed. This could also be used for
inputting the previous hash.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This reverts commit 36e0f12b.

The reverted commit adds a WARN to check against NULL entries in the
mem_id_ht rhashtable. Any kernel path implementing the XDP (generic or
driver) fast path is required to make a paired
xdp_rxq_info_reg/xdp_rxq_info_unreg call for proper function. In
addition, a driver using a different allocation scheme than the
default MEM_TYPE_PAGE_SHARED is required to additionally call
xdp_rxq_info_reg_mem_model.

For MEM_TYPE_ZERO_COPY, an xdp_rxq_info_reg_mem_model call ensures
that the mem_id_ht rhashtable has a properly inserted allocator id. If
not, this would be a driver bug. A NULL pointer kernel OOPS is
preferred to the WARN.
Suggested-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Overlapping changes in RXRPC, changing to ktime_get_seconds() whilst
adding some tracepoints.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jose Abreu says:

====================
Add support for XGMAC2 in stmmac

This series adds support for 10Gigabit IP in stmmac. The IP is called XGMAC2
and has many similarities with GMAC4. Due to this, its relatively easy to
incorporate this new IP into stmmac driver by adding a new block and
filling the necessary callbacks.

The functionality added by this series is still reduced but its only a
starting point which will later be expanded.

I splitted the patches into funcionality and to ease the review. Only the
patch 8/9 really enables the XGMAC2 block by adding a new compatible string.

Version 4 addresses review comments of Florian Fainelli and Rob Herring.

NOTE: Although the IP supports 10G, for now it was only possible to test it
at 1G speed due to 10G PHY HW shipping problems. Here follows iperf3
results at 1G:

Connecting to host 192.168.0.10, port 5201
[  4] local 192.168.0.3 port 39178 connected to 192.168.0.10 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-1.00   sec   110 MBytes   920 Mbits/sec    0    482 KBytes
[  4]   1.00-2.00   sec   113 MBytes   946 Mbits/sec    0    482 KBytes
[  4]   2.00-3.00   sec   112 MBytes   937 Mbits/sec    0    482 KBytes
[  4]   3.00-4.00   sec   113 MBytes   946 Mbits/sec    0    482 KBytes
[  4]   4.00-5.00   sec   112 MBytes   935 Mbits/sec    0    482 KBytes
[  4]   5.00-6.00   sec   113 MBytes   946 Mbits/sec    0    482 KBytes
[  4]   6.00-7.00   sec   112 MBytes   937 Mbits/sec    0    482 KBytes
[  4]   7.00-8.00   sec   113 MBytes   946 Mbits/sec    0    482 KBytes
[  4]   8.00-9.00   sec   112 MBytes   937 Mbits/sec    0    482 KBytes
[  4]   9.00-10.00  sec   113 MBytes   946 Mbits/sec    0    482 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec  1.09 GBytes   940 Mbits/sec    0             sender
[  4]   0.00-10.00  sec  1.09 GBytes   938 Mbits/sec                  receiver
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds the documentation for XGMAC2 DT bindings.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the bindings parsing for XGMAC2 IP block.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that we have all the XGMAC related callbacks, lets start integrating
this IP block into main driver.

Also, we corrected the initialization flow to only start DMA after
setting descriptors length.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

XGMAC2 uses the same engine of timestamping as GMAC4. Let's use the same
callbacks.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the MDIO related funcionalities for the new IP block XGMAC2.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the descriptor related callbacks for the new IP block XGMAC2.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the DMA related callbacks for the new IP block XGMAC2.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the MAC related callbacks for the new IP block XGMAC2.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new entry to HWIF table for XGMAC 2.10. For now we fill it with
empty callbacks which will be added in posterior patches.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
More complete PHYLINK support for mv88e6xxx

Previous patches added sufficient PHYLINK support to the mv88e6xxx
that it did not break existing use cases, basically fixed-link phys.

This patchset builds out the support so that SFP modules, up to
2.5Gbps can be supported, on mv88e6390X, on ports 9 and 10. It also
provides a framework which can be extended to support SFPs on ports
2-8 of mv88e6390X, 10Gbps PHYs, and SFP support on the 6352 family.

Russell King did much of the initial work, implementing the validate
and mac_link_state calls. However, there is an important TODO in the
commit message:

needs to call phylink_mac_change() when the port link comes up/goes down.

The remaining patches implement this, by adding more support for the
SERDES interfaces, in particular, interrupt support so we get notified
when the SERDES gains/looses sync.

This has been tested on the ZII devel C, using a Clearfog as peer
device.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a port changes CMODE, the SERDES interface being used can change.
Disable interrupts for the old SERDES interface, and enable interrupts
on the new.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

phylink wants to know when the MAC layers notices a change in the
link. For the 6390 family, this is a change in the SERDES state.

Add interrupt support for the SERDES interface used to implement
SGMII/1000Base-X/2500Base-X. This is currently limited to ports 9 and
10. Support for the 10G SERDES and other ports will be added later,
building on this basic framework.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An up coming change will register interrupts for individual switch
ports, using the mv88e6xxx_port as the interrupt context information.
Add members to the mv88e6xxx_port structure so we can link it back to
the mv88e6xxx_chip member the port belongs to and the port number of
the port.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 6390 family has a number of SERDES interfaces per port. When the
cmode changes, eg 1000Base-X to XAUI, the SERDES interface in use will
also change. Power down the old SERDES interface and power up the new
SERDES interface.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ports CMODE indicates the type of link between the MAC and the
PHY. It is used often in the SERDES code. Rather than read it each
time, cache its value.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 6390 has three different SERDES interface types. 2500Base-X is
implemented by the SGMII/1000Base-X SERDES. So power on/off the
correct SERDES.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a helper for accessing SERDES registers of the 6390 family.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>