- 14 8月, 2012 1 次提交
-
-
由 Jiri Slaby 提交于
Currently we have no way to assign tty->port while performing tty installation. There are two ways to provide the link tty_struct => tty_port. Either by calling tty_port_install from tty->ops->install or tty_port_register_device called instead of tty_register_device when the device is being set up after connected. In this patch we modify most of the drivers to do the latter. When the drivers use tty_register_device and we have tty_port already, we switch to tty_port_register_device. So we have the tty_struct => tty_port link for free for those. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 17 7月, 2012 1 次提交
-
-
由 Alan Cox 提交于
This will let us sort out a whole pile of tty related races. The alternative would be to keep points and refcount the termios objects. However 1. They are tiny anyway 2. Many devices don't use the stored copies 3. We can remove a pty special case Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 31 3月, 2012 1 次提交
-
-
由 Lucas De Marchi 提交于
Usage of /etc/modprobe.conf file was deprecated by module-init-tools and is no longer parsed by new kmod tool. References to this file are replaced in Documentation, comments and Kconfig according to the context. There are also some references to the old /etc/modules.conf from 2.4 kernels that are being removed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by: NTakashi Iwai <tiwai@suse.de> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 3月, 2012 1 次提交
-
-
由 David Howells 提交于
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 09 3月, 2012 2 次提交
-
-
由 Jiri Slaby 提交于
Checking if tty->index is in bounds is not needed. The tty has the index set in the initial open. This is done in get_tty_driver. And it can be only in interval <0,driver->num). So remove the tests which check exactly this interval. Some are left untouched as they check against the current backing device count. (Leaving apart that the check is racy in most of the cases.) Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jiri Slaby 提交于
All num, magic and owner are set by alloc_tty_driver. No need to re-set them on each allocation site. pti driver sets something different to what it passes to alloc_tty_driver. It is not a bug, since we don't use the lines parameter in any way. Anyway this is fixed, and now we do the right thing. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 23 9月, 2011 1 次提交
-
-
由 Yong Zhang 提交于
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: NYong Zhang <yong.zhang0@gmail.com> Acked-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 23 2月, 2011 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
As planned by Arnd Bergmann, this moves the following drivers from drivers/char/ to drivers/tty/ as that's where they really belong: amiserial nozomi synclink rocket cyclades moxa mxser isicom bfin_jtag_comm Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 18 2月, 2011 3 次提交
-
-
由 Alan Cox 提交于
Only oddities here are a couple of drivers that bogusly called the ldisc helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes away. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 11 8月, 2010 1 次提交
-
-
由 Alan Cox 提交于
As with the others we can use the port mutex to get the needed locking properties and fix the race with open. Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 22 5月, 2010 1 次提交
-
-
由 Dan Carpenter 提交于
This patch makes it return -ENODEV if we run out of empty slots in the probe function. It's unlikely to happen, but it makes the static checkers happy. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 01 5月, 2010 1 次提交
-
-
由 Alan Cox 提交于
This forgot to update a field in the old char drivers. The fact nobody has basically noticed (except one mxser user) rather suggests most of these drivers could go into the bitbucket. Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Andreas Pretzsch <apr@cn-eng.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 03 3月, 2010 2 次提交
-
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Joe Perches 提交于
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert printks to pr_<level> Convert some embedded function names to %s...__func__ Remove a period after exclamation points. Remove #define pr_dbg which could be used by future kernel.h includes Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 12月, 2009 3 次提交
-
-
由 Alan Cox 提交于
Alexander Strakh <strakh@ispras.ru> reported KERNEL_VERSION: 2.6.31 DESCRIBE: Driver drivers/char/isicom.c might sleep in atomic context, because it calls tty_port_xmit_buf under spin_lock. ./drivers/char/isicom.c: 1307 static void isicom_hangup(struct tty_struct *tty) 1308 { ... 1315 spin_lock_irqsave(&port->card->card_lock, flags); 1316 isicom_shutdown_port(port); ... Path to might_sleep macro from isicom_hangup: 1. isicom_hangup calls spin_lock_irqsave (drivers/char/isicom.c:1315) and then calls isicom_shutdown_port. 2. isiscom_shutdown_port calls tty_port_free_xmit_buf at drivers/char/isicom.c:906 3. tty_port_free_xmit_buf calls mutex_lock at drivers/char/tty_port:48 Found by Linux Driver Verification Project. Reported-by: NAlexander Strakh <strakh@ispras.ru> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Split this into two flags - INIT meaning the board is set up and ACTIVE meaning the board has ports open. Remove the broken HUPCL casing and push the counts somewhere sensible. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Trivial conversion in this case so might as well do it while testing the port_open design is right Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 20 9月, 2009 2 次提交
-
-
由 Alan Cox 提交于
Again moving towards being able to add a common open method Signed-off-by: NAlan Cox <alan@linux.intel.com>
-
由 Alan Cox 提交于
Start to extract and build a model for a common tty_port_close() Signed-off-by: NAlan Cox <alan@linux.intel.com>
-
- 13 7月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 7月, 2009 1 次提交
-
-
由 Joe Perches 提交于
Commit 5fd29d6c ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 6月, 2009 1 次提交
-
-
由 Jiri Slaby 提交于
Fix this: isicom.c: In function `isicom_probe': isicom.c:1587: warning: `signature' may be used uninitialized in this function by uninitialized_var(), because if the signature is not initialized in reset_card(), we won't use it. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 6月, 2009 1 次提交
-
-
由 Alan Cox 提交于
Some drivers implement this internally, others miss it out. Push the behaviour into the core code as that way everyone will do it consistently. Update the dtr rts method to raise or lower depending upon flags. Having a single method in this style fits most of the implementations more cleanly than two funtions. We need this in place before we tackle the USB side Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 4月, 2009 1 次提交
-
-
由 Alan Cox 提交于
The isicom driver leaks a kref on the shutdown path. Drop the additional kref we took Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 1月, 2009 5 次提交
-
-
由 Alan Cox 提交于
Again this is a lot of common code we can unify Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Start sucking more commonality out of the drivers into a single piece of core code. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
This helps set the basis for moving block_til_ready into common code. We also introduce a tty_port_hangup helper as this will also be generally needed. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
This moves another per device special out of what should be shared open wait paths into private methods Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
This is the first step to generalising the various pieces of waiting logic duplicated in all sorts of serial drivers. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 11月, 2008 1 次提交
-
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2008 1 次提交
-
-
由 Alan Cox 提交于
Rather than blindly keep taking krefs we reorder the code in a few places to pass the tty down to the right place (which is important as from the user side it is not the case that tty == port->tty in all situations). For the irq and related paths use the krefs to stop the tty being freed under us. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 7月, 2008 1 次提交
-
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 7月, 2008 3 次提交
-
-
由 Alan Cox 提交于
Move more bits into the tty_port structure Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Switch isicom to use a tty_port structure for some fields Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
Don't forget to enable and disable PCI devices. The device might be unusable without that. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 4月, 2008 2 次提交
-
-
由 Alan Cox 提交于
Fix the rather strange buffer management on open that turned up while auditing for BKL dependencies. Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
- Operations are now a shared const function block as with most other Linux objects - Introduce wrappers for some optional functions to get consistent behaviour - Wrap put_char which used to be patched by the tty layer - Document which functions are needed/optional - Make put_char report success/fail - Cache the driver->ops pointer in the tty as tty->ops - Remove various surplus lock calls we no longer need - Remove proc_write method as noted by Alexey Dobriyan - Introduce some missing sanity checks where certain driver/ldisc combinations would oops as they didn't check needed methods were present [akpm@linux-foundation.org: fix fs/compat_ioctl.c build] [akpm@linux-foundation.org: fix isicom] [akpm@linux-foundation.org: fix arch/ia64/hp/sim/simserial.c build] [akpm@linux-foundation.org: fix kgdb] Signed-off-by: NAlan Cox <alan@redhat.com> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-