task #29077503
commit 255f598507083905995ecab96392770ae03aac7f upstream
and, therefore, managed by the buddy), and eventually replug it later.

When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.

We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().

It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.

We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.

Add a module parameter to control if online memory shall be touched.

As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.

Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.

Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: NPankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
(cherry picked from ccommit 255f598507083905995ecab96392770ae03aac7f)
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>

Conflicts:
	minium fix on mm/page_alloc.c
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

task #29077503
commit c627ff5d982276908188fae86dbe727ed49c9594 upstream
have to do is watch out for concurrent onlining activity.
Tested-by: NPankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-5-david@redhat.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
(cherry picked from ccommit c627ff5d982276908188fae86dbe727ed49c9594)
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

task #29077503
commit f2af6d3978d74a7891d0f428537b4494498202cb upstream
virtio-mem device (and, therefore, its memory) belongs. Add a new
virtio-mem feature flag and export pxm_to_node, so it can be used in kernel
module context.

Acked-by: Michal Hocko <mhocko@suse.com> # for the export
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> # for the export
Acked-by: NPankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: NPankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-4-david@redhat.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
(cherry picked from ccommit f2af6d3978d74a7891d0f428537b4494498202cb)
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>

Conflicts:
	move drivers/acpi/numa/srat.c modification into
	drivers/acpi/numa.c
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

task #29077503
commit 5f1f79bbc9e26fa9412fa9522f957bb8f030c442 upstream
for adding/removing memory from that memory region on request.

When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.

On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.

The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.

User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.

Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.

One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".

This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.

Notes:
- In case memory is to be onlined by user space, we limit the amount of
  offline memory blocks, to not run out of memory. This is esp. an
  issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
  behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: NPankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: NPankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
(cherry picked from ccommit 5f1f79bbc9e26fa9412fa9522f957bb8f030c442)
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>

Conflicts:
	drivers/virtio/Makefile
	include/uapi/linux/virtio_ids.h
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

task #29077503
commit 18db149120c106cf2b1a2595f82f3229f9d223b8 upstream

Let's replace the __online_page...() functions by generic_online_page().
Hyper-V only wants to delay the actual onlining of un-backed pages, so
we can simpy re-use the generic function.

This patch (of 3):

Let's expose generic_online_page() so online_page_callback users can
simply fall back to the generic implementation when actually deciding to
online the pages.

Link: http://lkml.kernel.org/r/20190909114830.662-2-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
(cherry picked from ccommit 18db149120c106cf2b1a2595f82f3229f9d223b8)
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>

task #29077503
commit a9cd410a3d296846a8125aa43d97a573a354c472 upstream
When freeing pages are done with higher order, time spent on coalescing
pages by buddy allocator can be reduced.  With section size of 256MB,
hot add latency of a single section shows improvement from 50-60 ms to
less than 1 ms, hence improving the hot add latency by 60 times.  Modify
external providers of online callback to align with the change.

[arunks@codeaurora.org: v11]
  Link: http://lkml.kernel.org/r/1547792588-18032-1-git-send-email-arunks@codeaurora.org
[akpm@linux-foundation.org: remove unused local, per Arun]
[akpm@linux-foundation.org: avoid return of void-returning __free_pages_core(), per Oscar]
[akpm@linux-foundation.org: fix it for mm-convert-totalram_pages-and-totalhigh_pages-variables-to-atomic.patch]
[arunks@codeaurora.org: v8]
  Link: http://lkml.kernel.org/r/1547032395-24582-1-git-send-email-arunks@codeaurora.org
[arunks@codeaurora.org: v9]
  Link: http://lkml.kernel.org/r/1547098543-26452-1-git-send-email-arunks@codeaurora.org
Link: http://lkml.kernel.org/r/1538727006-5727-1-git-send-email-arunks@codeaurora.orgSigned-off-by: NArun KS <arunks@codeaurora.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Reviewed-by: NAlexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Srivatsa Vaddagiri <vatsa@codeaurora.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

(cherry picked from ccommit a9cd410a3d296846a8125aa43d97a573a354c472)
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>

Conflicts:
	replace totalram_pages_add as old way.

task #29077503
commit bb8965bd82fd4ed433a888f1383016ab3fa0d7de upstream
Memory migration might fail during offlining and we keep retrying in that
case.  This is currently obfuscated by goto retry loop.  The code is hard
to follow and as a result it is even suboptimal becase each retry round
scans the full range from start_pfn even though we have successfully
scanned/migrated [start_pfn, pfn] range already.  This is all only because
check_pages_isolated failure has to rescan the full range again.

De-obfuscate the migration retry loop by promoting it to a real for loop.
In fact remove the goto altogether by making it a proper double loop
(yeah, gotos are nasty in this specific case).  In the end we will get a
slightly more optimal code which is better readable.

[akpm@linux-foundation.org: reflow comments to 80 cols]
Link: http://lkml.kernel.org/r/20181211142741.2607-3-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

(cherry picked from ccommit bb8965bd82fd4ed433a888f1383016ab3fa0d7de)
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>

task #29077503
commit e3df4c6e4836ce93cd5cf92d9cbdeaf4439a0241 upstream
offlining a page range.  This is indeed the case when
test_pages_in_a_zone respp.  start_isolate_page_range fail.  This was an
omission when forward porting the debugging patch from an older kernel.

Fix the issue by dropping mem_hotplug_done from the failure condition
and keeping the single unlock in the catch all failure path.

Link: http://lkml.kernel.org/r/20190115120307.22768-1-mhocko@kernel.org
Fixes: 7960509329c2 ("mm, memory_hotplug: print reason for the offlining failure")
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NJan Kara <jack@suse.cz>
Reviewed-by: NJan Kara <jack@suse.cz>
Tested-by: NJan Kara <jack@suse.cz>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
(cherry picked from ccommit e3df4c6e4836ce93cd5cf92d9cbdeaf4439a0241)
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>

task #29077503
commit 7960509329c24a2bf0bc4929636614a1b7bb4443 upstream
The memory offlining failure reporting is inconsistent and insufficient.
Some error paths simply do not report the failure to the log at all.  When
we do report there are no details about the reason of the failure and
there are several of them which makes memory offlining failures hard to
debug.

Make sure that the
	memory offlining [mem %#010llx-%#010llx] failed
message is printed for all failures and also provide a short textual
reason for the failure e.g.

[ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed due to signal backoff

this tells us that the offlining has failed because of a signal pending
aka user intervention.

[akpm@linux-foundation.org: tweak messages a bit]
Link: http://lkml.kernel.org/r/20181107101830.17405-5-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Reviewed-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

(cherry picked from ccommit 7960509329c24a2bf0bc4929636614a1b7bb4443)
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>

task #29077503
commit 756d25be457fc5497da0ceee0f3d0c9eb4d8535d upstream
We have two types of users of page isolation:

 1. Memory offlining:  Offline memory so it can be unplugged. Memory
                       won't be touched.

 2. Memory allocation: Allocate memory (e.g., alloc_contig_range()) to
                       become the owner of the memory and make use of
                       it.

For example, in case we want to offline memory, we can ignore (skip
over) PageHWPoison() pages, as the memory won't get used.  We can allow
to offline memory.  In contrast, we don't want to allow to allocate such
memory.

Let's generalize the approach so we can special case other types of
pages we want to skip over in case we offline memory.  While at it, also
pass the same flags to test_pages_isolated().
Original-by: NDavid Hildenbrand <david@redhat.com>
Link: http://lkml.kernel.org/r/20191021172353.3056-3-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Suggested-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
(cherry picked from ccommit 756d25be457fc5497da0ceee0f3d0c9eb4d8535d)
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>

Conflicts:
	reenable patch context on all files.

task #29077503
commit d381c54760dcfad23743da40516e7e003d73952a upstream
Heiko has complained that his log is swamped by warnings from
has_unmovable_pages

[   20.536664] page dumped because: has_unmovable_pages
[   20.536792] page:000003d081ff4080 count:1 mapcount:0 mapping:000000008ff88600 index:0x0 compound_mapcount: 0
[   20.536794] flags: 0x3fffe0000010200(slab|head)
[   20.536795] raw: 03fffe0000010200 0000000000000100 0000000000000200 000000008ff88600
[   20.536796] raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000
[   20.536797] page dumped because: has_unmovable_pages
[   20.536814] page:000003d0823b0000 count:1 mapcount:0 mapping:0000000000000000 index:0x0
[   20.536815] flags: 0x7fffe0000000000()
[   20.536817] raw: 07fffe0000000000 0000000000000100 0000000000000200 0000000000000000
[   20.536818] raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000

which are not triggered by the memory hotplug but rather CMA allocator.
The original idea behind dumping the page state for all call paths was
that these messages will be helpful debugging failures.  From the above it
seems that this is not the case for the CMA path because we are lacking
much more context.  E.g the second reported page might be a CMA allocated
page.  It is still interesting to see a slab page in the CMA area but it
is hard to tell whether this is bug from the above output alone.

Address this issue by dumping the page state only on request.  Both
start_isolate_page_range and has_unmovable_pages already have an argument
to ignore hwpoison pages so make this argument more generic and turn it
into flags and allow callers to combine non-default modes into a mask.
While we are at it, has_unmovable_pages call from
is_pageblock_removable_nolock (sysfs removable file) is questionable to
report the failure so drop it from there as well.

Link: http://lkml.kernel.org/r/20181218092802.31429-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
(cherry picked from ccommit d381c54760dcfad23743da40516e7e003d73952a)
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>

Conflicts:
	mm/page_alloc.c

task #29077503
commit ca215086b14b89a0e70fc211314944aa6ce50020 upstream
pages inflated in virtio-balloon.  Nowadays, it is only a marker that a
page is part of virtio-balloon and therefore logically offline.
We also want to make use of this flag in other balloon drivers - for
inflated pages or when onlining a section but keeping some pages offline
(e.g.  used right now by XEN and Hyper-V via set_online_page_callback()).

We are going to expose this flag to dump tools like makedumpfile.  But
instead of exposing PG_balloon, let's generalize the concept of marking
pages as logically offline, so it can be reused for other purposes later
on.

Rename PG_balloon to PG_offline.  This is an indicator that the page is
logically offline, the content stale and that it should not be touched
(e.g.  a hypervisor would have to allocate backing storage in order for
the guest to dump an unused page).  We can then e.g.  exclude such pages
from dumps.

We replace and reuse KPF_BALLOON (23), as this shouldn't really harm
(and for now the semantics stay the same).  In following patches, we
will make use of this bit also in other balloon drivers.  While at it,
document PGTABLE.

[akpm@linux-foundation.org: fix comment text, per David]
Link: http://lkml.kernel.org/r/20181119101616.8901-3-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NKonstantin Khlebnikov <koct9i@gmail.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NPankaj gupta <pagupta@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Christian Hansen <chansen3@cisco.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Julien Freche <jfreche@vmware.com>
Cc: Kairui Song <kasong@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Lianbo Jiang <lijiang@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

(cherry picked from ccommit ca215086b14b89a0e70fc211314944aa6ce50020)
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>

fix #29327388

Now the blk-mq did not support multi-page bvec, which means each bvec
can only contain one page. Though the physical segment is 1 in one bio,
the bio still can contains multiple bvecs which are physically contiguous,
so we can not use one bvec length to map the request, instead we should
use the full length of the request to mapping the request, when the
physical segment is 1 in a request.

In future if we support multi-page bvecs, this patch can be dropped.
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

Now the blk-mq did not support multi-page bvec, which means each bvec
can only contain one page. For simple PRP, it just support one bvec
in the bio though the physical segment is only 1, otherwise it can
not map the whole request.

In future if we support multi-page bvecs, this patch can be dropped.
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit 049bf37262c61c99f45438910711b55054b24838 upstream

The shortcut for single segment SGL requests did not set the PSDT field
to mark the request as using SGLs.

Fixes: 297910571f08 ("nvme-pci: optimize mapping single segment requests using SGLs")
Signed-off-by: NKlaus Birkelund Jensen <klaus.jensen@cnexlabs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit a4f40484e7f1dff56bb9f286cc59ffa36e0259eb upstream

In the current code, the nvme is using a fixed 4k PRP entry size,
but if the kernel use a page size which is more than 4k, we should
consider the situation that the bv_offset may be larger than the
dev->ctrl.page_size. Otherwise we may miss setting the prp2 and then
cause the command can't be executed correctly.

Fixes: dff824b2aadb ("nvme-pci: optimize mapping of small single segment requests")
Cc: stable@vger.kernel.org
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Hao <haokexin@gmail.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit 70479b71bc80ae6f63c8d6644cc76dff99f79686 upstream

Remove two pointless local variables, remove ret assignment that is
never used, move the use_sgl initialization closer to where it is used.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit 297910571f08f1d7e398793df6e606ebb375a3f1 upstream

If the controller supports SGLs we can take another short cut for single
segment request, given that we can always map those without another
indirection structure, and thus don't need to create a scatterlist
structure.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit dff824b2aadb7808f50ceb0927acaec5ad750ce7 upstream

If a request is single segment and fits into one or two PRP entries we
do not have to create a scatterlist for it, but can just map the bio_vec
directly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit d43f1ccfad053dbefba1d15443cdc36ca60958f0 upstream

We'll have a better way to optimize for small I/O that doesn't
require it soon, so remove the existing inline_sg case to make that
optimization easier to implement.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit 4aedb705437f6f98b45f45c394e6803ca67abd33 upstream

This prepares for some bigger changes to the data mapping helpers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit 783b94bd9250478154904fa782d2cfc46336cdf6 upstream

We always have exactly one segment, so we can simply call dma_map_bvec.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit b15c592de37ed9d71499a3b8a750d1b235fcba3d upstream

This mirrors how nvme_map_pci is called and will allow simplifying some
checks in nvme_unmap_pci later on.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit 7fe07d14f71fabef642a478626248a9121e95b7b upstream

This means we now have a function that undoes everything nvme_map_data
does and we can simplify the error handling a bit.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit 915f04c93db4e3a7388c8ad8ddfc28830e4cbce3 upstream

Cleaning up the command setup isn't related to unmapping data, and
disentangling them will simplify error handling a bit down the road.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit 9b048119a153590b934ef49aae309b723587f527 upstream

nvme_init_iod should really be split into two parts: initialize a few
general iod fields, which can easily be done at the beginning of
nvme_queue_rq, and allocating the scatterlist if needed, which logically
belongs into nvme_map_data with the code making use of it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit 3ab3a0313cb8c50391d74e40fd46a3408d8e4de9 upstream

Provide a nice little shortcut for mapping a single bvec.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit 9d9de535f385a8b3ba0e88ca0abf386c5704bbfc upstream

In a lot of places we want to know the DMA direction for a given
struct request.  Add a little helper to make it a littler easier.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit 2a876f5e25e8ec9fa5777d36e5695ee33dd63f6f upstream

This provides a nice little shortcut to get the integrity data for
drivers like NVMe that only support a single integrity segment.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit 3aef3cae4342c1d8137a1c0782cbb66f1be3943c upstream

Return the currently active bvec segment, potentially spanning multiple
pages.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29327388

commit 39f8e36401142d73e33a954ac4bdf844fb5de9ae upstream
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #29256237

commit a01a9445c00eca3e37523eb6b0d87f494eceeb4b TencentOS-kernel

Since 'commit f719e375 ("ipvs: drop first packet to
redirect conntrack")', when a new TCP connection meet
the conditions that need reschedule, the first syn packet
is dropped, this cause one second latency for the new
connection, more discussion about this problem can easy
search from google, such as:

1)One second connection delay in masque
https://marc.info/?t=151683118100004&r=1&w=2

2)IPVS low throughput #70747
https://github.com/kubernetes/kubernetes/issues/70747

3)Apache Bench can fill up ipvs service proxy in seconds #544
https://github.com/cloudnativelabs/kube-router/issues/544

4)Additional 1s latency in `host -> service IP -> pod`
https://github.com/kubernetes/kubernetes/issues/90854

5)kube-proxy ipvs conn_reuse_mode setting causes errors
with high load from single client
https://github.com/kubernetes/kubernetes/issues/81775

The root cause is when the old session is expired, the
conntrack related to the session is dropped by
ip_vs_conn_drop_conntrack. The code is as follows:
```
static void ip_vs_conn_expire(struct timer_list *t)
{
...

     if ((cp->flags & IP_VS_CONN_F_NFCT) &&
         !(cp->flags & IP_VS_CONN_F_ONE_PACKET)) {
             /* Do not access conntracks during subsys cleanup
              * because nf_conntrack_find_get can not be used after
              * conntrack cleanup for the net.
              */
             smp_rmb();
             if (ipvs->enable)
                     ip_vs_conn_drop_conntrack(cp);
     }
...
}
```
As shown in the code, only when condition (cp->flags & IP_VS_CONN_F_NFCT)
is true, the function ip_vs_conn_drop_conntrack will be called.

So we optimize this by following steps (Administrators
can choose the following optimization by setting
net.ipv4.vs.conn_reuse_old_conntrack=1):
1) erase the IP_VS_CONN_F_NFCT flag (it is safely because
   no packets will use the old session)
2) call ip_vs_conn_expire_now to release the old session,
   then the related conntrack will not be dropped
3) then ipvs unnecessary to drop the first syn packet, it
   just continue to pass the syn packet to the next process,
   create a new ipvs session, and the new session will related
   to the old conntrack(which is reopened by conntrack as a new
   one), the next whole things is just as normal as that the old
   session isn't used to exist.

The above processing has no problems except for passive FTP,
for passive FTP situation, ipvs can judging from
condition (atomic_read(&cp->n_control)) and condition (cp->control).
So, for other conditions(means not FTP), ipvs should give users
the right to choose，they can choose a high performance one processing
logical by setting net.ipv4.vs.conn_reuse_old_conntrack=1. It is necessary
because most business scenarios (such as kubernetes) are very sensitive
to TCP short connection latency.

This patch has been verified on our thousands of kubernets
node servers on Tencent Inc.
Signed-off-by: NYangYuxi <yx.atom1@gmail.com>
[Tony: add the missing sysctl knob and disable it by default]
Signed-off-by: NTony Lu <tonylu@linux.alibaba.com>
Acked-by: NDust Li <dust.li@linux.alibaba.com>

to #28991349

commit 9515743bfb39c61aaf3d4f3219a645c8d1fe9a0e upstream

Completions need to consumed in the same order the controller submitted
them, otherwise future completion entries may overwrite ones we haven't
handled yet. Hold the nvme queue's poll lock while completing new CQEs to
prevent another thread from freeing command tags for reuse out-of-order.

Fixes: dabcefab45d3 ("nvme: provide optimized poll function for separate poll queues")
Signed-off-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28991349

commit 0542cd57d266074114d70791ab245e18f750cd32 upstream

This patch avoids that the kernel-doc script complains about these
function headers when building with W=1.

Cc: Hannes Reinecke <hare@suse.com>
Cc: Keith Busch <keith.busch@intel.com>
Fixes: ed76e329d74a ("blk-mq: abstract out queue map") # v5.0.
Fixes: e42b3867de4b ("blk-mq-rdma: pass in queue map to blk_mq_rdma_map_queues") # v5.0.
Reviewed-by: NChaitanya Kulkarni <chiatanya.kulkarni@wdc.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28991349

commit 5aceaeb26394538858a9dbae5830d628469a44cf upstream

We should check if a given queue map actually has queues enabled before
dispatching to it.  This allows drivers to not initialize optional but
not used map types, which subsequently will allow fixing problems with
queue map rebuilds for that case.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28991349

commit e5edd5f298fafda28284bafb8371e6f0b7681035 upstream

From 7e849dd9cf37 ("nvme-pci: don't share queue maps"), the mapping
table won't be initialized actually if map->nr_queues is zero, so
we can't use blk_mq_map_queue_type() to retrieve hctx any more.

This way still may cause broken mapping, fix it by skipping zero-queues
maps in blk_mq_map_swqueue().

Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28991349

commit e5edd5f298fafda28284bafb8371e6f0b7681035 upstream

Now that the block layer checks if a queue map has any queues inside
it there is no more reason to duplicate the maps for the non-default
types.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28991349

commit 6e66b49392419f3fe134e1be583323ef75da1e4b upstream

blk_mq_map_queues() and multiple .map_queues() implementations expect that
set->map[HCTX_TYPE_DEFAULT].nr_queues is set to the number of hardware
queues. Hence set .nr_queues before calling these functions. This patch
fixes the following kernel warning:

WARNING: CPU: 0 PID: 2501 at include/linux/cpumask.h:137
Call Trace:
 blk_mq_run_hw_queue+0x19d/0x350 block/blk-mq.c:1508
 blk_mq_run_hw_queues+0x112/0x1a0 block/blk-mq.c:1525
 blk_mq_requeue_work+0x502/0x780 block/blk-mq.c:775
 process_one_work+0x9af/0x1740 kernel/workqueue.c:2269
 worker_thread+0x98/0xe40 kernel/workqueue.c:2415
 kthread+0x361/0x430 kernel/kthread.c:255

Fixes: ed76e329d74a ("blk-mq: abstract out queue map") # v5.0
Reported-by: syzbot+d44e1b26ce5c3e77458d@syzkaller.appspotmail.com
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28991349

commit 5938870247be4453ef6602c7ce467bebb48113c8 upstream

Now almost all .map_queues() implementation based on managed irq
affinity doesn't update queue mapping and it just retrieves the
old built mapping, so if nr_hw_queues is changed, the mapping talbe
includes stale mapping. And only blk_mq_map_queues() may rebuild
the mapping talbe.

One case is that we limit .nr_hw_queues as 1 in case of kdump kernel.
However, drivers often builds queue mapping before allocating tagset
via pci_alloc_irq_vectors_affinity(), but set->nr_hw_queues can be set
as 1 in case of kdump kernel, so wrong queue mapping is used, and
kernel panic[1] is observed during booting.

This patch fixes the kernel panic triggerd on nvme by rebulding the
mapping table via blk_mq_map_queues().

[1] kernel panic log
[    4.438371] nvme nvme0: 16/0/0 default/read/poll queues
[    4.443277] BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
[    4.444681] PGD 0 P4D 0
[    4.445367] Oops: 0000 [#1] SMP NOPTI
[    4.446342] CPU: 3 PID: 201 Comm: kworker/u33:10 Not tainted 4.20.0-rc5-00664-g5eb02f7ee1eb-dirty #459
[    4.447630] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014
[    4.448689] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[    4.449368] RIP: 0010:blk_mq_map_swqueue+0xfb/0x222
[    4.450596] Code: 04 f5 20 28 ef 81 48 89 c6 39 55 30 76 93 89 d0 48 c1 e0 04 48 03 83 f8 05 00 00 48 8b 00 42 8b 3c 28 48 8b 43 58 48 8b 04 f8 <48> 8b b8 98 00 00 00 4c 0f a3 37 72 42 f0 4c 0f ab 37 66 8b b8 f6
[    4.453132] RSP: 0018:ffffc900023b3cd8 EFLAGS: 00010286
[    4.454061] RAX: 0000000000000000 RBX: ffff888174448000 RCX: 0000000000000001
[    4.456480] RDX: 0000000000000001 RSI: ffffe8feffc506c0 RDI: 0000000000000001
[    4.458750] RBP: ffff88810722d008 R08: ffff88817647a880 R09: 0000000000000002
[    4.464580] R10: ffffc900023b3c10 R11: 0000000000000004 R12: ffff888174448538
[    4.467803] R13: 0000000000000004 R14: 0000000000000001 R15: 0000000000000001
[    4.469220] FS:  0000000000000000(0000) GS:ffff88817bac0000(0000) knlGS:0000000000000000
[    4.471554] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    4.472464] CR2: 0000000000000098 CR3: 0000000174e4e001 CR4: 0000000000760ee0
[    4.474264] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    4.476007] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    4.477061] PKRU: 55555554
[    4.477464] Call Trace:
[    4.478731]  blk_mq_init_allocated_queue+0x36a/0x3ad
[    4.479595]  blk_mq_init_queue+0x32/0x4e
[    4.480178]  nvme_validate_ns+0x98/0x623 [nvme_core]
[    4.480963]  ? nvme_submit_sync_cmd+0x1b/0x20 [nvme_core]
[    4.481685]  ? nvme_identify_ctrl.isra.8+0x70/0xa0 [nvme_core]
[    4.482601]  nvme_scan_work+0x23a/0x29b [nvme_core]
[    4.483269]  ? _raw_spin_unlock_irqrestore+0x25/0x38
[    4.483930]  ? try_to_wake_up+0x38d/0x3b3
[    4.484478]  ? process_one_work+0x179/0x2fc
[    4.485118]  process_one_work+0x1d3/0x2fc
[    4.485655]  ? rescuer_thread+0x2ae/0x2ae
[    4.486196]  worker_thread+0x1e9/0x2be
[    4.486841]  kthread+0x115/0x11d
[    4.487294]  ? kthread_park+0x76/0x76
[    4.487784]  ret_from_fork+0x3a/0x50
[    4.488322] Modules linked in: nvme nvme_core qemu_fw_cfg virtio_scsi ip_tables
[    4.489428] Dumping ftrace buffer:
[    4.489939]    (ftrace buffer empty)
[    4.490492] CR2: 0000000000000098
[    4.491052] ---[ end trace 03cd268ad5a86ff7 ]---

Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-nvme@lists.infradead.org
Cc: David Milburn <dmilburn@redhat.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28991349

commit c45b1fa2433c65e44bdf48f513cb37289f3116b9 upstream

When -ENOSPC is returned from pci_alloc_irq_vectors_affinity(),
we still try to allocate multiple irq vectors again, so irq queues
covers the admin queue actually. But we don't consider that, then
number of the allocated irq vector may be same with sum of
io_queues[HCTX_TYPE_DEFAULT] and io_queues[HCTX_TYPE_READ], this way
is obviously wrong, and finally breaks nvme_pci_map_queues(), and
warning from pci_irq_get_affinity() is triggered.

IRQ queues should cover admin queues, this patch makes this
point explicitely in nvme_calc_io_queues().

We got severl boot failure internal report on aarch64, so please
consider to fix it in v4.20.

Fixes: 6451fe73fa0f ("nvme: fix irq vs io_queue calculations")
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Tested-by: Nfin4478 <fin4478@hotmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>