The FSF mailing address may change. Drop it.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The dw_wdt has an external reset line, that can keep the device in reset
and therefore rendering it useless and also is the only way of stopping
the watchdog once it was started.

Get the reset lines for this core from the devicetree. As these lines are
optional, use devm_reset_control_get_optional_shared. If the reset line
is not specified in the devicetree, the reset framework will just skip
deasserting and continue.
This way all users of the driver will continue to function without
any harm, even if the reset line is not specified in the devicetree.
Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: linux-watchdog@vger.kernel.org
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Document the reset lines holding the watchdog core in reset.
Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-watchdog@vger.kernel.org
Cc: devicetree@vger.kernel.org
Acked-by: NRob Herring <robh@kernel.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Both NCT6793D and NCT6795D are compatible to NCT6792D.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

On some systems its desirable to have watchdog reboot the system
when it does not come up fast enough. This adds a kernel parameter
to disable the auto-update of watchdog before userspace takes over
and a kernel option to set the default. The info messages were
added to shorten error searching on misconfigured systems.
Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This adds support for watchdog part of Fintek F71868 Super I/O chip to
f71808e_wdt driver.

The F71868 chip is, in general, very similar to a F71869, however it has
slightly different set of available reset pulse widths.

Tested on MSI A55M-P33 motherboard.
Signed-off-by: NMaciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This patch adds IWDG (Independent WatchDoG) support for STM32 platform.
Signed-off-by: NYannick FERTRE <yannick.fertre@st.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This adds documentation of device tree bindings for the STM32 IWDG
(Independent WatchDoG).
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add binding information for DA9062 and DA9061 watchdog.

Example bindings for both DA9062 and DA9061 devices are added. For
the DA9061 device, a fallback compatible line is added as a valid
combination of compatible strings.

The original binding for DA9062 (only) used to reside inside the
Documentation/devicetree/bindings/mfd/da9062.txt MFD document.
The da9062-watchdog section was deleted in that file and replaced
with a link to the new DA9061/62 binding information stored in this
patch.
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSteve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The watchdog infrastructure now supports handling watchdog keepalive
if the watchdog is running while the watchdog device is closed.
The infrastructure now also supports generating additional heartbeats
if the maximum hardware timeout is smaller than or close to the
configured timeout. Convert the driver to use this infrastructure.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The header says: This file is licensed under the terms of the GNU
General Public License version 2. The right identifier for
MODULE_LICENSE is "GPL v2" then.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Cleanup the code from minor readability issues (no functional changes):
1. Fix checkpatch: ERROR: Do not include the paragraph about writing to
   the Free Software Foundation's mailing address.
2. Fix checkpatch: WARNING: quoted string split across lines
3. Fix chechpatch: WARNING: Prefer 'unsigned int' to bare use of
   'unsigned'
4. Use 'dev' consistently in probe function instead of mixing dev with
   &pdev->dev.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Simplify the flow in helper function for getting the driver data by
using of_device_get_match_data() and only one if() branch.

The code should be equivalent.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Structures watchdog_device, watchdog_ops and s3c2410_wdt_variant are not
modified so they can be made const to increase code safeness.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Firmware followed by bootloader leaves watchdog running.

Keep it running in the driver.

User will not need any additional options to reboot in case of panic
during boot.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Describe the WDT hardware in the RZ/A series.
Signed-off-by: NChris Brandt <chris.brandt@renesas.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NRob Herring <robh@kernel.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Adds a watchdog timer driver for the Renesas RZ/A Series SoCs. A reset
handler is also included since a WDT overflow is the only method for
restarting an RZ/A SoC.
Signed-off-by: NChris Brandt <chris.brandt@renesas.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Because suspending to RAM may lose the register values, they are restored
on resume. This is currently done unconditionally because there is
currently no way to know (from the driver) whether they have really been
lost or are still valid. Writing MR also pings the watchdog and this may
not be what is expected so add a comment explaining why it happens.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Because the only way to use the driver is to have a device tree enabling
it, pdev->dev.of_node will never be NULL. Remove the unnecessary check.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This fixes a problem with reading files larger than 2GB from a UFS-2
file system:

    https://bugzilla.kernel.org/show_bug.cgi?id=195721

The incorrect UFS s_maxsize limit became a problem as of commit
c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
which started using s_maxbytes to avoid a page index overflow in
do_generic_file_read().

That caused files to be truncated on UFS-2 file systems because the
default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it.

Here I simply increase the default to a common value used by other file
systems.
Signed-off-by: NRichard Narron <comet.berkeley@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Will B <will.brokenbourgh2877@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: <stable@vger.kernel.org> # v4.9 and backports of c2a9737fSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull NFS client bugfixes from Trond Myklebust:
 "Bugfixes include:

   - Fix a typo in commit e0926934 ("NFS append COMMIT after
     synchronous COPY") that breaks copy offload

   - Fix the connect error propagation in xs_tcp_setup_socket()

   - Fix a lock leak in nfs40_walk_client_list

   - Verify that pNFS requests lie within the offset range of the layout
     segment"

* tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: Mark unnecessarily extern functions as static
  SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()
  NFSv4.0: Fix a lock leak in nfs40_walk_client_list
  pnfs: Fix the check for requests in range of layout segment
  xprtrdma: Delete an error message for a failed memory allocation in xprt_rdma_bc_setup()
  pNFS/flexfiles: missing error code in ff_layout_alloc_lseg()
  NFS fix COMMIT after COPY

Pull tty fix from Greg KH:
 "Here is a single tty core fix for 4.12-rc4. It reverts a patch that a
  lot of people reported as causing lockdep and other warnings.

  Right after I reverted this in my tree, it seems like another
  "correct" fix might have shown up, but it's too late in the release
  cycle to be messing with tty core locking, so let's just revert this
  for now to go back how things always have been and try it again for
  4.13.

  This has not been in linux-next as I only reverted it a few hours ago"

* tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "tty: fix port buffer locking"

Pull input subsystem fixes from Dmitry Torokhov:

 - a couple of regression fixes in synaptics and axp20x-pek drivers

 - try to ease transition from PS/2 to RMI for Synaptics touchpad users
   by ensuring we do not try to activate RMI mode when RMI SMBus support
   is not enabled, and nag users a bit to enable it

 - plus a couple of other changes that seemed worthwhile for this
   release

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too
  Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail
  Input: tm2-touchkey - use LEN_ON as boolean value instead of LED_FULL
  Input: synaptics - tell users to report when they should be using rmi-smbus
  Input: synaptics - warn the users when there is a better mode
  Input: synaptics - keep PS/2 around when RMI4_SMB is not enabled
  Input: synaptics - clear device info before filling in
  Input: silead - disable interrupt during suspend

Pull RTC fixlet from Alexandre Belloni:
 "A single patch, not really a fix but I don't think there is any reason
  to delay it.

  Change the mailing list address"

* tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  MAINTAINERS: update RTC mailing list

Pull SCSI fixes from James Bottomley:
 "This is nine fixes, seven of which are for the qedi driver (new as of
  4.10) the other two are a use after free in the cxgbi drivers and a
  potential NULL dereference in the rdac device handler"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: libcxgbi: fix skb use after free
  scsi: qedi: Fix endpoint NULL panic during recovery.
  scsi: qedi: set max_fin_rt default value
  scsi: qedi: Set firmware tcp msl timer value.
  scsi: qedi: Fix endpoint NULL panic in qedi_set_path.
  scsi: qedi: Set dma_boundary to 0xfff.
  scsi: qedi: Correctly set firmware max supported BDs.
  scsi: qedi: Fix bad pte call trace when iscsiuio is stopped.
  scsi: scsi_dh_rdac: Use ctlr directly in rdac_failover_get()

Pull rdma fixes from Doug Ledford:
 "For the most part this is just a minor -rc cycle for the rdma
  subsystem. Even given that this is all of the -rc patches since the
  merge window closed, it's still only about 25 patches:

   - Multiple i40iw, nes, iw_cxgb4, hfi1, qib, mlx4, mlx5 fixes

   - A few upper layer protocol fixes (IPoIB, iSER, SRP)

   - A modest number of core fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (26 commits)
  RDMA/SA: Fix kernel panic in CMA request handler flow
  RDMA/umem: Fix missing mmap_sem in get umem ODP call
  RDMA/core: not to set page dirty bit if it's already set.
  RDMA/uverbs: Declare local function static and add brackets to sizeof
  RDMA/netlink: Reduce exposure of RDMA netlink functions
  RDMA/srp: Fix NULL deref at srp_destroy_qp()
  RDMA/IPoIB: Limit the ipoib_dev_uninit_default scope
  RDMA/IPoIB: Replace netdev_priv with ipoib_priv for ipoib_get_link_ksettings
  RDMA/qedr: add null check before pointer dereference
  RDMA/mlx5: set UMR wqe fence according to HCA cap
  net/mlx5: Define interface bits for fencing UMR wqe
  RDMA/mlx4: Fix MAD tunneling when SRIOV is enabled
  RDMA/qib,hfi1: Fix MR reference count leak on write with immediate
  RDMA/hfi1: Defer setting VL15 credits to link-up interrupt
  RDMA/hfi1: change PCI bar addr assignments to Linux API functions
  RDMA/hfi1: fix array termination by appending NULL to attr array
  RDMA/iw_cxgb4: fix the calculation of ipv6 header size
  RDMA/iw_cxgb4: calculate t4_eq_status_entries properly
  RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers
  RDMA/nes: ACK MPA Reply frame
  ...

This reverts commit 925bb1ce.

It causes lots of warnings and problems so for now, let's just revert
it.

Reported-by: <valdis.kletnieks@vt.edu>
Reported-by: NRussell King <linux@armlinux.org.uk>
Reported-by: NSergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Reported-by: NJiri Slaby <jslaby@suse.cz>
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Acked-by: NVegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

nfs_initialise_sb() and nfs_clone_super() are declared as extern even
though they are used only in fs/nfs/super.c. Mark them as static.

Also remove explicit 'inline' directive from nfs_initialise_sb() and
leave it upto compiler to decide whether inlining is worth it.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Merge tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "A couple of patches for the aspeed pwm fan driver"

* tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1
  hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimed
  hwmon: (aspeed-pwm-tacho) On read failure return -ETIMEDOUT
  hwmon: (aspeed-pwm-tacho) Select REGMAP

Pull MTD fixes from Brian Norris:
 "NAND updates from Boris:

  tango fixes:
   - Add missing MODULE_DEVICE_TABLE() in tango_nand.c
   - Update the number of corrected bitflips

  core fixes:
   - Fix a long standing memory leak in nand_scan_tail()
   - Fix several bugs introduced by the per-vendor init/detection
     infrastructure (introduced in 4.12)
   - Add a static specifier to nand_ooblayout_lp_hamming_ops definition"

* tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd:
  mtd: nand: make nand_ooblayout_lp_hamming_ops static
  mtd: nand: tango: Update ecc_stats.corrected
  mtd: nand: tango: Export OF device ID table as module aliases
  mtd: nand: samsung: warn about un-parseable ECC info
  mtd: nand: free vendor-specific resources in init failure paths
  mtd: nand: drop unneeded module.h include
  mtd: nand: don't leak buffers when ->scan_bbt() fails

Make fan and pwm names in sysfs start with index 1 in accordance to
Documentation/hwmon/sysfs-interface conventions.

Current implementation starts with index 0, making tools such as
sensors(1) skip the first fan.
Signed-off-by: NStefan Schaeckeler <sschaeck@cisco.com>
Fixes: 2d7a548a ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Call of_node_put() on a node claimed with of_node_get() or by any other
means such as for_each_child_of_node().
Signed-off-by: NStefan Schaeckeler <sschaeck@cisco.com>
Fixes: 2d7a548a ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

acpi_dev_found checks that there is a matching ACPI node, but it
may be disabled (_STA method returns 0) in which case the
soc_button_array driver will not bind to it and axp20x-pek should
handle the power-button.

This commit switches from acpi_dev_found to acpi_dev_present to
avoid not registering an input-dev for the powerbutton when there
is a disabled PNP0C40 device.

The ACPI-6.0 standard defines a standard gpio button device using
the ACPI0011 HID replacing the custom PNP0C40 gpio device, many
newer devices define both PNP0C40 and ACPI0011 devices enabling one
or the other depending on whether the BIOS thinks it is going to boot
Android or Windows.

This commit adds a check for the ACPI0011 device, so that if
either device is present *and* enabled we don't register an input-dev
for the powerbutton.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Commit 9b13a4ca ("Input: axp20x-pek - do not register input device
on some systems") added a check for the INTCFD9 ACPI device which also
handles the powerbutton as on some systems the powerbutton is connected
to both the PMIC, handled by axp20x-pek, and to a gpio on the SoC, handled
by soc_button_array which attaches itself to the INTCFD9 ACPI device.

Testing + comparing DSDTs has shown that this only happens on Cherry
Trail devices with an AXP288 PMIC, the AXP288 PMIC is also used on
Bay Trail devices but there the power button is only connected to
the PMIC and not handled by soc_button_array.

This means that the INTCFD9 check has caused a regression on Bay Trail
devices, causing power-button presses to no longer be seen.

This commit fixes this by limiting the check to devices where the ACPI
node for the AXP288 contains a _HRV (hardware revision) attribute with
a value of 3 which indicates we are dealing with a Cherry Trail platform.

Fixes: 9b13a4ca ("Input: axp20x-pek - do not register input ...")
Reported-by: NСергей Трусов <t.rus76@ya.ru>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Merge with mainline to get acpi_dev_present() needed by patches to
axp20x-pek driver.

Pull ACPI fixes from Rafael Wysocki:
 "These revert one more problematic commit related to the ACPI-based
  handling of laptop lids and make some unuseful error messages coming
  from ACPICA go away.

  Specifics:

   - Revert one more commit related to the ACPI-based handling of laptop
     lids that changed the default behavior on laptops that booted with
     closed lids and introduced a regression there (Benjamin Tissoires).

   - Add a missing acpi_put_table() to the code implementing the
     /sys/firmware/acpi/tables interface to prevent a counter in the
     ACPICA core from overflowing (Dan Williams).

   - Drop error messages printed by ACPICA on acpi_get_table() reference
     counting mismatches as they need not indicate real errors at this
     point (Lv Zheng)"

* tag 'acpi-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Tables: Fix regression introduced by a too early mechanism enabling
  Revert "ACPI / button: Change default behavior to lid_init_state=open"
  ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of service

Pull power management fixes from Rafael Wysocki:
 "These fix two bugs in error code paths in the cpufreq core and in the
  kirkwood-cpufreq driver.

  Specifics:

   - Make cpufreq_register_driver() return an error if the ->init()
     calls fail for all CPUs to prevent non-functional drivers from
     hanging around for no reason (David Arcari).

   - Make kirkwood-cpufreq check the return value of
     clk_prepare_enable() (which may fail) as appropriate (Arvind
     Yadav)"

* tag 'pm-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable()
  cpufreq: cpufreq_register_driver() should return -ENODEV if init fails

Pull /dev/random bug fix from Ted Ts'o:
 "Fix a race on architectures with prioritized interrupts (such as m68k)
  which can causes crashes in drivers/char/random.c:get_reg()"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  fix race in drivers/char/random.c:get_reg()

Merge misc fixes from Andrew Morton:
 "15 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  scripts/gdb: make lx-dmesg command work (reliably)
  mm: consider memblock reservations for deferred memory initialization sizing
  mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified
  mlock: fix mlock count can not decrease in race condition
  mm/migrate: fix refcount handling when !hugepage_migration_supported()
  dax: fix race between colliding PMD & PTE entries
  mm: avoid spurious 'bad pmd' warning messages
  mm/page_alloc.c: make sure OOM victim can try allocations with no watermarks once
  pcmcia: remove left-over %Z format
  slub/memcg: cure the brainless abuse of sysfs attributes
  initramfs: fix disabling of initramfs (and its compression)
  mm: clarify why we want kmalloc before falling backto vmallock
  frv: declare jiffies to be located in the .data section
  include/linux/gfp.h: fix ___GFP_NOLOCKDEP value
  ksm: prevent crash after write_protect_page fails