The tests to explicitly reject probing CPS, RFE and SRS instructions
are redundant as the default case is now to reject undecoded patterns.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The PLD instructions wasn't being decoded correctly and the emulation
code wasn't adjusting PC correctly.

As the PLD instruction is only a performance hint we emulate it as a
simple nop, and we can broaden the instruction decoding to take into
account newer PLI and PLDW instructions.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The emulation of SETEND was broken as it changed the endianess for
the running kprobes handling code. Rather than adding a new simulation
routine to fix this we'll just reject probing of SETEND as these should
be very rare in the kernel.

Note, the function emulate_none is now unused but it is left in the
source code as future patches will use it.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Following the change to remove support for coprocessor instructions
we are left with three stub functions which can be consolidated.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The kernel doesn't currently support VFP or Neon code, and probing of
code with CP15 operations is fraught with bad consequences. Therefore we
don't need the ability to probe coprocessor instructions and the code to
support this can be removed.

The removed code also had at least two bugs:
 - MRC into R15 should set CPSR not trash PC
 - LDC and STC which use PC as base register needed the address offset by 8
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The USAD8 instruction wasn't being explicitly decoded leading
to the incorrect emulation routine being called. It can be correctly
decoded in the same way as the signed multiply instructions so we move
the decoding there.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The signed multiply instructions were being decoded incorrectly.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

These sign extension instructions are encoded as extend-and-add
instructions where the register to add is specified as r15. The decoding
routines weren't checking for this and were using the incorrect
emulation code, giving incorrect results.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The instructions space for media instructions contains some undefined
patterns. We need to reject probing of these because they may in future
become defined and the kprobes code may then emulate them faultily.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The v6T2 RBIT instruction was accidentally being emulated correctly,
this patch adds correct decoding for the instruction.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

These instructions are specified as UNPREDICTABLE.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The decoding of these instructions got the register indexed and
immediate indexed forms the wrong way around, causing incorrect
emulation.

Instructions like "LDRD Rx, [Rx]" were corrupting Rx because the base
register writeback was being performed unconditionally, overwriting the
value just loaded from memory. The fix is to only writeback the base
register when that form of the instruction is used. Note, now that we
reject probing writeback with PC the emulation code doesn't need the
check rn!=15.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Using PC as an base register with writeback is UNPREDICTABLE, as is non
word-sized loads or stores of PC. (We only really care about preventing
loads to PC but it keeps the code simpler if we also exclude stores.)
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The decoding of these instructions got the register indexed and
immediate indexed forms the wrong way around, causing incorrect
emulation.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The emulation code for STREX and LDREX instructions is faulty, however,
rather than attempting to fix this we reject probes of these
instructions. We do this because they can never succeed in gaining
exclusive access as the exception framework clears the exclusivity
monitor when a probes breakpoint is hit. (This is a general problem
when probing all instructions executing between a LDREX and its
corresponding STREX and can lead to infinite retry loops.)
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The instructions space for 'Multiply and multiply-accumulate'
instructions contains some undefined patterns. We need to reject
probing of these because they may in future become defined and the
kprobes code may then emulate them faultily.

This has already happened with the new MLS instruction which this patch
also adds correct decoding for as well as tightening up other decoding
tests. (Before this patch the wrong emulation routine was being called
for MLS though it still produced correct results.)
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The MRS instruction should set mode and interrupt bits in the read value
so it is simpler to use a new simulation routine (simulate_mrs) rather
than some modified emulation.

prep_emulate_rd12 is now unused and removed.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

We need to reject probing of instructions which read SPSR because
we can't handle this as the value in SPSR is lost when the exception
handler for the probe breakpoint first runs.

This patch also fixes the bitmask for MRS instructions decoding to
include checking bits 5-7.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Emulation of instructions like "ADD rd, rn, #<const>" would result in a
corrupted value for rd.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Probing these instructions was corrupting R0 because the emulation code
didn't account for the fact that they don't write a result to a
register.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Now we have the framework code handling conditionally executed
instructions we can remove redundant checks in individual simulation
routines.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

When a kprobe is placed onto conditionally executed ARM instructions,
many of the emulation routines used to single step them produce corrupt
register results. Rather than fix all of these cases we modify the
framework which calls them to test the relevant condition flags and, if
the test fails, skip calling the emulation code.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Currently emulate_ldrd and emulate_strd don't even have the adjustment
of the PC value, so in case of Rn == PC, it will not update the PC
incorrectly but instead load/store from the wrong address.  Let's add
both the adjustment of the PC value and the check for PC == PC.
Signed-off-by: NViktor Rosendahl <viktor.rosendahl@nokia.com>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block:
  ide: always ensure that blk_delay_queue() is called if we have pending IO
  block: fix request sorting at unplug
  dm: improve block integrity support
  fs: export empty_aops
  ide: ide_requeue_and_plug() reinstate "always plug" behaviour
  blk-throttle: don't call xchg on bool
  ufs: remove unessecary blk_flush_plug
  block: make the flush insertion use the tail of the dispatch list
  block: get rid of elv_insert() interface
  block: dump request state on seeing a corrupted request completion

On an error path in inotify_init1 a normal user can trigger a double
free of struct user.  This is a regression introduced by a2ae4cc9
("inotify: stop kernel memory leak on file creation failure").

We fix this by making sure that if a group exists the user reference is
dropped when the group is cleaned up.  We should not explictly drop the
reference on error and also drop the reference when the group is cleaned
up.

The new lifetime rules are that an inotify group lives from
inotify_new_group to the last fsnotify_put_group.  Since the struct user
and inotify_devs are directly tied to this lifetime they are only
changed/updated in those two locations.  We get rid of all special
casing of struct user or user->inotify_devs.
Signed-off-by: NEric Paris <eparis@redhat.com>
Cc: stable@kernel.org (2.6.37 and up)
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Just because we are not requeuing a request does not mean that
some aren't pending. So always issue a blk_delay_queue() if
either we are requeueing OR there's pending IO.

This fixes a boot problem for some IDE boxes.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Comparison function for list_sort() must be anticommutative,
otherwise it is not sorting in ordinary meaning.

But fortunately list_sort() always check ((*cmp)(priv, a, b) <= 0)
it not distinguish negative and zero, so comparison function can
implement only less-or-equal instead of full three-way comparison.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

The current block integrity (DIF/DIX) support in DM is verifying that
all devices' integrity profiles match during DM device resume (which
is past the point of no return).  To some degree that is unavoidable
(stacked DM devices force this late checking).  But for most DM
devices (which aren't stacking on other DM devices) the ideal time to
verify all integrity profiles match is during table load.

Introduce the notion of an "initialized" integrity profile: a profile
that was blk_integrity_register()'d with a non-NULL 'blk_integrity'
template.  Add blk_integrity_is_initialized() to allow checking if a
profile was initialized.

Update DM integrity support to:
- check all devices with _initialized_ integrity profiles match
  during table load; uninitialized profiles (e.g. for underlying DM
  device(s) of a stacked DM device) are ignored.
- disallow a table load that would result in an integrity profile that
  conflicts with a DM device's existing (in-use) integrity profile
- avoid clearing an existing integrity profile
- validate all integrity profiles match during resume; but if they
  don't all we can do is report the mismatch (during resume we're past
  the point of no return)
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

With the ->sync_page() hook gone, we have a few users that
add their own static address_space_operations without any
functions defined.

fs/inode.c already has an empty_aops that it uses for init
purposes. Lets export that and use it in the places where
an otherwise empty aops was defined.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

We see stalls if we don't always ensure that the queue gets run
again. Even if rq == NULL, we could have other pending requests
in the queue.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

xchg does not work portably with smaller than 32bit types.
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

We already flush the per-process plugging list when context switching,
so a blk_flush_plug call just before a yield() is not needed.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

It's not a preempt type request, in fact we have to insert it
behind requests that do specify INSERT_FRONT.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Merge it with __elv_add_request(), it's pretty pointless to
have a function with only two callers. The main interface
is elv_add_request()/__elv_add_request().
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Currently we just dump a non-informative 'request botched' message.
Lets actually try and print something sane to help debug issues
around this.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
  drm/i915/lvds: Remove 0xa0 DDC probe for LVDS
  drm/i915/crt: Remove 0xa0 probe for VGA

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: rpckbd - fix a leak of the IRQ during init failure
  Input: wacom - add support for Lenovo tablet ID (0xE6)
  Input: i8042 - downgrade selftest error message to dbg()
  Input: synaptics - fix crash in synaptics_module_init()
  Input: spear-keyboard - fix inverted condition in interrupt handler
  Input: uinput - allow for 0/0 min/max on absolute axes.
  Input: sparse-keymap - report KEY_UNKNOWN for unknown scan codes
  Input: sparse-keymap - report scancodes with key events
  Input: h3600_ts_input - fix a spelling error
  Input: wacom - report resolution for pen devices
  Input: wacom - constify wacom_features for a new missed Bamboo models