- 19 9月, 2012 3 次提交
-
-
由 Suresh Siddha 提交于
Currently for x86 and x86_32 binaries, fpstate in the user sigframe is copied to/from the fpstate in the task struct. And in the case of signal delivery for x86_64 binaries, if the fpstate is live in the CPU registers, then the live state is copied directly to the user sigframe. Otherwise fpstate in the task struct is copied to the user sigframe. During restore, fpstate in the user sigframe is restored directly to the live CPU registers. Historically, different code paths led to different bugs. For example, x86_64 code path was not preemption safe till recently. Also there is lot of code duplication for support of new features like xsave etc. Unify signal handling code paths for x86 and x86_64 kernels. New strategy is as follows: Signal delivery: Both for 32/64-bit frames, align the core math frame area to 64bytes as needed by xsave (this where the main fpu/extended state gets copied to and excludes the legacy compatibility fsave header for the 32-bit [f]xsave frames). If the state is live, copy the register state directly to the user frame. If not live, copy the state in the thread struct to the user frame. And for 32-bit [f]xsave frames, construct the fsave header separately before the actual [f]xsave area. Signal return: As the 32-bit frames with [f]xstate has an additional 'fsave' header, copy everything back from the user sigframe to the fpstate in the task structure and reconstruct the fxstate from the 'fsave' header (Also user passed pointers may not be correctly aligned for any attempt to directly restore any partial state). At the next fpstate usage, everything will be restored to the live CPU registers. For all the 64-bit frames and the 32-bit fsave frame, restore the state from the user sigframe directly to the live CPU registers. 64-bit signals always restored the math frame directly, so we can expect the math frame pointer to be correctly aligned. For 32-bit fsave frames, there are no alignment requirements, so we can restore the state directly. "lat_sig catch" microbenchmark numbers (for x86, x86_64, x86_32 binaries) are with in the noise range with this change. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1343171129-2747-4-git-send-email-suresh.b.siddha@intel.com [ Merged in compilation fix ] Link: http://lkml.kernel.org/r/1344544736.8326.17.camel@sbsiddha-desk.sc.intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
Consolidate x86, x86_64 inline asm routines saving/restoring fpu state using config_enabled(). Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1343171129-2747-3-git-send-email-suresh.b.siddha@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Suresh Siddha 提交于
Use config_enabled() to cleanup the definitions of is_ia32/is_x32. Move the function prototypes to the header file to cleanup ifdefs, and move the x32_setup_rt_frame() code around. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1343171129-2747-2-git-send-email-suresh.b.siddha@intel.com Merged in compilation fix from, Link: http://lkml.kernel.org/r/1344544736.8326.17.camel@sbsiddha-desk.sc.intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 05 9月, 2012 7 次提交
-
-
由 Mathias Krause 提交于
IOMMU_INIT_POST and IOMMU_INIT_POST_FINISH pass the plain value 0 instead of NULL to __IOMMU_INIT. Fix this and make sparse happy by doing so. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Link: http://lkml.kernel.org/r/1346621506-30857-8-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathias Krause 提交于
It's redundant and makes sparse complain about it. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Link: http://lkml.kernel.org/r/1346621506-30857-7-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathias Krause 提交于
Don't remove the __user annotation of the fpstate pointer, but drop the superfluous void * cast instead. This fixes the following sparse warnings: xsave.c:135:15: warning: cast removes address space of expression xsave.c:135:15: warning: incorrect type in argument 1 (different address spaces) xsave.c:135:15: expected void const volatile [noderef] <asn:1>*<noident> [...] Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1346621506-30857-6-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathias Krause 提交于
Stay in sync with the declaration and fix the corresponding sparse warnings. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: http://lkml.kernel.org/r/1346621506-30857-5-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathias Krause 提交于
Fix the following sparse warnings by adding appropriate __user casts and annotations: ia32_signal.c:165:38: warning: incorrect type in argument 1 (different address spaces) ia32_signal.c:165:38: expected struct sigaltstack const [noderef] [usertype] <asn:1>*<noident> ia32_signal.c:165:38: got struct sigaltstack * [...] Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/1346621506-30857-4-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathias Krause 提交于
The address calculated by VDSO32_SYMBOL() is a pointer into userland. Add the __user annotation to fix related sparse warnings in its users. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Andy Lutomirski <luto@MIT.EDU> Link: http://lkml.kernel.org/r/1346621506-30857-3-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathias Krause 提交于
Fix the following sparse warnings: sys_ia32.c:293:38: warning: incorrect type in argument 2 (different address spaces) sys_ia32.c:293:38: expected unsigned int [noderef] [usertype] <asn:1>*stat_addr sys_ia32.c:293:38: got unsigned int *stat_addr Ironically, sys_ia32.h was introduced to fix sparse warnings but missed that one. Signed-off-by: NMathias Krause <minipli@googlemail.com> Link: http://lkml.kernel.org/r/1346621506-30857-2-git-send-email-minipli@googlemail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 03 9月, 2012 2 次提交
-
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fixes from Steve French. * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix cifs_do_create error hadnling cifs: print error code if smb signature verification fails CIFS: Fix log messages in packet checking for SMB2 CIFS: Protect i_nlink from being negative
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) NLA_PUT* --> nla_put_* conversion got one case wrong in nfnetlink_log, fix from Patrick McHardy. 2) Missed error return check in ipw2100 driver, from Julia Lawall. 3) PMTU updates in ipv4 were setting the expiry time incorrectly, fix from Eric Dumazet. 4) SFC driver erroneously reversed src and dst when reporting filters via ethtool. 5) Memory leak in CAN protocol and wrong setting of IRQF_SHARED in sja1000 can platform driver, from Alexey Khoroshilov and Sven Schmitt. 6) Fix multicast traffic scaling regression in ipv4_dst_destroy, only take the lock when we really need to. From Eric Dumazet. 7) Fix non-root process spoofing in netlink, from Pablo Neira Ayuso. 8) CWND reduction in TCP is done incorrectly during non-SACK recovery, fix from Yuchung Cheng. 9) Revert netpoll change, and fix what was actually a driver specific problem. From Amerigo Wang. This should cure bootup hangs with netconsole some people reported. 10) Fix xen-netfront invoking __skb_fill_page_desc() with a NULL page pointer. From Ian Campbell. 11) SIP NAT fix for expectiontation creation, from Pablo Neira Ayuso. 12) __ip_rt_update_pmtu() needs RCU locking, from Eric Dumazet. 13) Fix usbnet deadlock on resume, can't use GFP_KERNEL in this situation. From Oliver Neukum. 14) The davinci ethernet driver triggers an OOPS on removal because it frees an MDIO object before unregistering it. Fix from Bin Liu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) net: qmi_wwan: add several new Gobi devices fddi: 64 bit bug in smt_add_para() net: ethernet: fix kernel OOPS when remove davinci_mdio module net/xfrm/xfrm_state.c: fix error return code net: ipv6: fix error return code net: qmi_wwan: new device: Foxconn/Novatel E396 usbnet: fix deadlock in resume cs89x0 : packet reception not working netfilter: nf_conntrack: fix racy timer handling with reliable events bnx2x: Correct the ndo_poll_controller call bnx2x: Move netif_napi_add to the open call ipv4: must use rcu protection while calling fib_lookup bnx2x: fix 57840_MF pci id net: ipv4: ipmr_expire_timer causes crash when removing net namespace e1000e: DoS while TSO enabled caused by link partner with small MSS l2tp: avoid to use synchronize_rcu in tunnel free function gianfar: fix default tx vlan offload feature flag netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation xen-netfront: use __pskb_pull_tail to ensure linear area is big enough on RX netfilter: nfnetlink_log: fix error return code in init path ...
-
- 02 9月, 2012 4 次提交
-
-
由 Bjørn Mork 提交于
Gobi devices are composite, needing both the qcserial and qmi_wwan drivers to support all functions. Re-syncing the list of supported devices with qcserial. Cc: Aleksander Morgado <aleksander@lanedo.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@tempietto.lan>
-
由 Dan Carpenter 提交于
The intent was to set 4 bytes of data so that's why the sp_len is set to 4 on the next line. The cast to u_long pointer clears 8 bytes on 64 bit arches. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@tempietto.lan>
-
由 Linus Torvalds 提交于
-
由 John Stultz 提交于
Andreas Bombe reported that the added ktime_t overflow checking added to timespec_valid in commit 4e8b1452 ("time: Improve sanity checking of timekeeping inputs") was causing problems with X.org because it caused timeouts larger then KTIME_T to be invalid. Previously, these large timeouts would be clamped to KTIME_MAX and would never expire, which is valid. This patch splits the ktime_t overflow checking into a new timespec_valid_strict function, and converts the timekeeping codes internal checking to use this more strict function. Reported-and-tested-by: NAndreas Bombe <aeb@debian.org> Cc: Zhouping Liu <zliu@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 9月, 2012 10 次提交
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix KVM_GET_MSR for PV EOI kvm: Fix nonsense handling of compat ioctl
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6由 Linus Torvalds 提交于
Pull PARISC fixes from James Bottomley: "This is a set of two bug fixes. One is the ATOMIC problem which is now causing a compile failure in certain situations. The other is mishandling of PER_LINUX32 which may also cause user visible effects. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] fix personality flag check in copy_thread() [PARISC] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "A couple of s390 bug fixes for 3.5-rc4" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/32: Don't clobber personality flags on exec s390/smp: add missing smp_store_status() for !SMP s390/dasd: fix ioctl return value s390: Always use "long" for ssize_t to match size_t
-
由 Bin Liu 提交于
davinci mdio device is not unregistered from mdiobus when removing the module, which causes BUG_ON() when free the device from mdiobus. Calling mdiobus_unregister() before mdiobus_free() fixes the issue. Signed-off-by: NBin Liu <b-liu@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Initialize return variable before exiting on an error path. The initial initialization of the return variable is also dropped, because that value is never used. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksander Morgado 提交于
Foxconn-branded Novatel E396, Gobi3k modem. Cc: Dan Williams <dcbw@redhat.com> Cc: Bjørn Mork <bjorn@mork.no> Cc: Ben Chan <benchan@google.com> Signed-off-by: NAleksander Morgado <aleksander@lanedo.com> Acked-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Neukum 提交于
A usbnet device can share a multifunction device with a storage device. If the storage device is autoresumed the usbnet devices also needs to be autoresumed. Allocating memory with GFP_KERNEL can deadlock in this case. This should go back into all kernels that have commit 65841fd5 That is 3.5 Signed-off-by: NOliver Neukum <oneukum@suse.de> CC: stable@kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jaccon Bastiaansen 提交于
The RxCFG register of the CS89x0 could be configured incorrectly (because of misplaced parentheses), resulting in the disabling of packet reception. Signed-off-by: NJaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
-
- 31 8月, 2012 12 次提交
-
-
由 Pablo Neira Ayuso 提交于
Existing code assumes that del_timer returns true for alive conntrack entries. However, this is not true if reliable events are enabled. In that case, del_timer may return true for entries that were just inserted in the dying list. Note that packets / ctnetlink may hold references to conntrack entries that were just inserted to such list. This patch fixes the issue by adding an independent timer for event delivery. This increases the size of the ecache extension. Still we can revisit this later and use variable size extensions to allocate this area on demand. Tested-by: NOliver Smith <olipro@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Merav Sicron 提交于
This patch correct poll_bnx2x (ndo_poll_controller call) which was not functioning well with MSI-X. Signed-off-by: NMerav Sicron <meravs@broadcom.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Merav Sicron 提交于
Move netif_napi_add for all queues from the probe call to the open call, to avoid the case that napi objects are added for queues that may eventually not be initialized and activated. With the former behavior, the driver could crash when netpoll was calling ndo_poll_controller. Signed-off-by: NMerav Sicron <meravs@broadcom.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Following lockdep splat was reported by Pavel Roskin : [ 1570.586223] =============================== [ 1570.586225] [ INFO: suspicious RCU usage. ] [ 1570.586228] 3.6.0-rc3-wl-main #98 Not tainted [ 1570.586229] ------------------------------- [ 1570.586231] /home/proski/src/linux/net/ipv4/route.c:645 suspicious rcu_dereference_check() usage! [ 1570.586233] [ 1570.586233] other info that might help us debug this: [ 1570.586233] [ 1570.586236] [ 1570.586236] rcu_scheduler_active = 1, debug_locks = 0 [ 1570.586238] 2 locks held by Chrome_IOThread/4467: [ 1570.586240] #0: (slock-AF_INET){+.-...}, at: [<ffffffff814f2c0c>] release_sock+0x2c/0xa0 [ 1570.586253] #1: (fnhe_lock){+.-...}, at: [<ffffffff815302fc>] update_or_create_fnhe+0x2c/0x270 [ 1570.586260] [ 1570.586260] stack backtrace: [ 1570.586263] Pid: 4467, comm: Chrome_IOThread Not tainted 3.6.0-rc3-wl-main #98 [ 1570.586265] Call Trace: [ 1570.586271] [<ffffffff810976ed>] lockdep_rcu_suspicious+0xfd/0x130 [ 1570.586275] [<ffffffff8153042c>] update_or_create_fnhe+0x15c/0x270 [ 1570.586278] [<ffffffff815305b3>] __ip_rt_update_pmtu+0x73/0xb0 [ 1570.586282] [<ffffffff81530619>] ip_rt_update_pmtu+0x29/0x90 [ 1570.586285] [<ffffffff815411dc>] inet_csk_update_pmtu+0x2c/0x80 [ 1570.586290] [<ffffffff81558d1e>] tcp_v4_mtu_reduced+0x2e/0xc0 [ 1570.586293] [<ffffffff81553bc4>] tcp_release_cb+0xa4/0xb0 [ 1570.586296] [<ffffffff814f2c35>] release_sock+0x55/0xa0 [ 1570.586300] [<ffffffff815442ef>] tcp_sendmsg+0x4af/0xf50 [ 1570.586305] [<ffffffff8156fc60>] inet_sendmsg+0x120/0x230 [ 1570.586308] [<ffffffff8156fb40>] ? inet_sk_rebuild_header+0x40/0x40 [ 1570.586312] [<ffffffff814f4bdd>] ? sock_update_classid+0xbd/0x3b0 [ 1570.586315] [<ffffffff814f4c50>] ? sock_update_classid+0x130/0x3b0 [ 1570.586320] [<ffffffff814ec435>] do_sock_write+0xc5/0xe0 [ 1570.586323] [<ffffffff814ec4a3>] sock_aio_write+0x53/0x80 [ 1570.586328] [<ffffffff8114bc83>] do_sync_write+0xa3/0xe0 [ 1570.586332] [<ffffffff8114c5a5>] vfs_write+0x165/0x180 [ 1570.586335] [<ffffffff8114c805>] sys_write+0x45/0x90 [ 1570.586340] [<ffffffff815d2722>] system_call_fastpath+0x16/0x1b Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Commit c3def943 have added support for new pci ids of the 57840 board, while failing to change the obsolete value in 'pci_ids.h'. This patch does so, allowing the probe of such devices. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Francesco Ruggeri 提交于
When tearing down a net namespace, ipv4 mr_table structures are freed without first deactivating their timers. This can result in a crash in run_timer_softirq. This patch mimics the corresponding behaviour in ipv6. Locking and synchronization seem to be adequate. We are about to kfree mrt, so existing code should already make sure that no other references to mrt are pending or can be created by incoming traffic. The functions invoked here do not cause new references to mrt or other race conditions to be created. Invoking del_timer_sync guarantees that ipmr_expire_timer is inactive. Both ipmr_expire_process (whose completion we may have to wait in del_timer_sync) and mroute_clean_tables internally use mfc_unres_lock or other synchronizations when needed, and they both only modify mrt. Tested in Linux 3.4.8. Signed-off-by: NFrancesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bruce Allan 提交于
With a low enough MSS on the link partner and TSO enabled locally, the networking stack can periodically send a very large (e.g. 64KB) TCP message for which the driver will attempt to use more Tx descriptors than are available by default in the Tx ring. This is due to a workaround in the code that imposes a limit of only 4 MSS-sized segments per descriptor which appears to be a carry-over from the older e1000 driver and may be applicable only to some older PCI or PCIx parts which are not supported in e1000e. When the driver gets a message that is too large to fit across the configured number of Tx descriptors, it stops the upper stack from queueing any more and gets stuck in this state. After a timeout, the upper stack assumes the adapter is hung and calls the driver to reset it. Remove the unnecessary limitation of using up to only 4 MSS-sized segments per Tx descriptor, and put in a hard failure test to catch when attempting to check for message sizes larger than would fit in the whole Tx ring. Refactor the remaining logic that limits the size of data per Tx descriptor from a seemingly arbitrary 8KB to a limit based on the dynamic size of the Tx packet buffer as described in the hardware specification. Also, fix the logic in the check for space in the Tx ring for the next largest possible packet after the current one has been successfully queued for transmit, and use the appropriate defines for default ring sizes in e1000_probe instead of magic values. This issue goes back to the introduction of e1000e in 2.6.24 when it was split off from e1000. Reported-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Cc: Stable <stable@vger.kernel.org> [2.6.24+] Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 xeb@mail.ru 提交于
Avoid to use synchronize_rcu in l2tp_tunnel_free because context may be atomic. Signed-off-by: NDmitry Kozlov <xeb@mail.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
Commit - "b852b720 gianfar: fix bug caused by 87c288c6" disables by default (on mac init) the hw vlan tag insertion. The "features" flags were not updated to reflect this, and "ethtool -K" shows tx-vlan-offload to be "on" by default. Cc: Sebastian Poehn <sebastian.poehn@belden.com> Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
We're hitting bug while trying to reinsert an already existing expectation: kernel BUG at kernel/timer.c:895! invalid opcode: 0000 [#1] SMP [...] Call Trace: <IRQ> [<ffffffffa0069563>] nf_ct_expect_related_report+0x4a0/0x57a [nf_conntrack] [<ffffffff812d423a>] ? in4_pton+0x72/0x131 [<ffffffffa00ca69e>] ip_nat_sdp_media+0xeb/0x185 [nf_nat_sip] [<ffffffffa00b5b9b>] set_expected_rtp_rtcp+0x32d/0x39b [nf_conntrack_sip] [<ffffffffa00b5f15>] process_sdp+0x30c/0x3ec [nf_conntrack_sip] [<ffffffff8103f1eb>] ? irq_exit+0x9a/0x9c [<ffffffffa00ca738>] ? ip_nat_sdp_media+0x185/0x185 [nf_nat_sip] We have to remove the RTP expectation if the RTCP expectation hits EBUSY since we keep trying with other ports until we succeed. Reported-by: NRafal Fitt <rafalf@aplusc.com.pl> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Ian Campbell 提交于
I'm slightly concerned by the "only in exceptional circumstances" comment on __pskb_pull_tail but the structure of an skb just created by netfront shouldn't hit any of the especially slow cases. This approach still does slightly more work than the old way, since if we pull up the entire first frag we now have to shuffle everything down where before we just received into the right place in the first place. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Mel Gorman <mgorman@suse.de> Cc: xen-devel@lists.xensource.com Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A bunch of scattered fixes ati/intel/nouveau, couple of core ones, nothing too shocking or different." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S gma500: Consider CRTC initially active. drm/radeon: fix dig encoder selection on DCE61 drm/radeon: fix double free in radeon_gpu_reset drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740 drm/radeon: rework panel mode setup drm/radeon/atom: powergating fixes for DCE6 drm/radeon/atom: rework DIG modesetting on DCE3+ drm/radeon: don't disable plls that are in use by other crtcs drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700 drm/radeon: initialize tracked CS state drm/radeon: fix reading CB_COLORn_MASK from the CS drm/nvc0/copy: check PUNITS to determine which copy engines are disabled i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard drm/i915: Use the correct size of the GTT for placing the per-process entries drm: Check for invalid cursor flags drm: Initialize object type when using DRM_MODE() macro drm/i915: fix color order for BGR formats on IVB drm/i915: fix wrong order of parameters in port checking functions
-
- 30 8月, 2012 2 次提交
-
-
由 Heiko Carstens 提交于
In native 32 bit mode the personality flags were not correctly inherited. This is the s390 version of 59e4c3a2 "powerpc/32: Don't clobber personality flags on exec". Reported-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Paul Menzel 提交于
Connecting an ASUS VW222S [1] over VGA a garbled screen is shown with vertical stripes in the top half. In commit bc42aabc [2] commit bc42aabc Author: Adam Jackson <ajax@redhat.com> Date: Wed May 23 16:26:54 2012 -0400 drm/edid/quirks: ViewSonic VA2026w Adam Jackson added the quirk `EDID_QUIRK_FORCE_REDUCED_BLANKING` which is also needed for this ASUS monitor. All log files and output from `xrandr` is included in the referenced Bugzilla report #17629. Please note that this monitor only has a VGA (D-Sub) connector [1]. [1] http://www.asus.com/Display/LCD_Monitors/VW222S/ [2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=bc42aabc6a01b92b0f961d65671564e0e1cd7592 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17629Signed-off-by: NPaul Menzel <paulepanter@users.sourceforge.net> Cc: <dri-devel@lists.freedesktop.org> Cc: Adam Jackson <ajax@redhat.com> Cc: Ian Pilcher <arequipeno@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-