- 10 9月, 2005 18 次提交
-
-
由 NeilBrown 提交于
Most awkward part of this is delaying write requests until bitmap updates have been flushed. To achieve this, we have a sequence number (seq_flush) which is incremented each time the raid5 is unplugged. If the raid thread notices that this has changed, it flushes bitmap changes, and assigned the value of seq_flush to seq_write. When a write request arrives, it is given the number from seq_write, and that write request may not complete until seq_flush is larger than the saved seq number. We have a new queue for storing stripes which are waiting for a bitmap flush and an extra flag for stripes to record if the write was 'degraded' and so should not clear the a bit in the bitmap. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
version-1 superblocks are not (normally) 4K long, and can be of variable size. Writing the full 4K can cause corruption (but only in non-default configurations). With this patch the super-block-flavour can choose a size to read, and set a size to write based on what it finds. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
read_sb_page() assumed that if sync_page_io fails, the device would be marked faultly. However it isn't. So in the face of error, read_sb_page would loop forever. Redo the logic so that this cannot happen. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
As this is used to flag an internal bitmap. Also, introduce symbolic names for feature bits. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
It is possibly (and occasionally useful) to have a raid1 without persistent superblocks. The code in add_new_disk for adding a device to such an array always tries to read a superblock. This will obviously fail. So do the appropriate test and call md_import_device with appropriate args. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
When hot-adding a bitmap, bitmap_daemon_work could get called while the bitmap is being created, so don't set mddev->bitmap until the bitmap is ready. This requires freeing the bitmap inside bitmap_create if creation failed part-way through. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
The 'lastrun' time wasn't being initialised, so it could be half a jiffie-cycle before it seemed to be time to do work again. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
A state of 0 mean 'not quiesced' A state of 1 means 'is quiesced' The original code got this wrong. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
linear currently uses division by the size of the smallest componenet device to find which device a request goes to. If that smallest device is larger than 2 terabytes, then the division will not work on some systems. So we introduce a pre-shift, and take care not to make the hash table too large, much like the code in raid0. Also get rid of conf->nr_zones, which is not needed. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
If a device is flagged 'WriteMostly' and the array has a bitmap, and the bitmap superblock indicates that write_behind is allowed, then write_behind is enabled for WriteMostly devices. Write requests will be acknowledges as complete to the caller (via b_end_io) when all non-WriteMostly devices have completed the write, but will not be cleared from the bitmap until all devices complete. This requires memory allocation to make a local copy of the data being written. If there is insufficient memory, then we fall-back on normal write semantics. Signed-Off-By: NPaul Clements <paul.clements@steeleye.com> Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
This allows a device in a raid1 to be marked as "write mostly". Read requests will only be sent if there is no other option. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Both file-bitmaps and superblock bitmaps are supported. If you add a bitmap file on the array device, you lose. This introduces a 'default_bitmap_offset' field in mddev, as the ioctl used for adding a superblock bitmap doesn't have room for giving an offset. Later, this value will be setable via sysfs. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
When we find a 'stale' bitmap, possibly because it is new, we should just assume every bit needs to be set, but rather base the setting of bits on the current state of the array (degraded and recovery_cp). Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
... otherwise we loose a reference and can never free the file. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jun'ichi Nomura 提交于
Fix another bug in dm-raid1.c that the dirty region may stay in or be moved to clean list and freed while in use. It happens as follows: CPU0 CPU1 ------------------------------------------------------------------------------ rh_dec() if (atomic_dec_and_test(pending)) <the region is still marked dirty> rh_inc() if the region is clean mark the region dirty and remove from clean list mark the region clean and move to clean list atomic_inc(pending) At this stage, the region is in clean list and will be mistakenly reclaimed by rh_update_states() later. Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
md does not yet support BIO_RW_BARRIER, so be honest about it and fail (-EOPNOTSUPP) any such requests. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
'this_sector' is a virtual (array) address while 'head_position' is a physical (device) address, so substraction doesn't make any sense. devs[slot].addr should be used instead of this_sector. However, this patch doesn't make much practical different to the read balancing due to the effects of later code. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 viro@ZenIV.linux.org.uk 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 9月, 2005 1 次提交
-
-
由 Peter Osterlund 提交于
Jens: ->bi_set is totally unnecessary bloat of struct bio. Just define a proper destructor for the bio and it already knows what bio_set it belongs too. Peter: Fixed the bugs. Signed-off-by: NJens Axboe <axboe@suse.de> Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 9月, 2005 1 次提交
-
-
由 Herbert Xu 提交于
This patch goes through the current users of the crypto layer and sets CRYPTO_TFM_REQ_MAY_SLEEP at crypto_alloc_tfm() where all crypto operations are performed in process context. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 8月, 2005 2 次提交
-
-
由 NeilBrown 提交于
It's possible for this to still have flags in it and a previous instance has been stopped, and that confused the new array using the same mddev. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
I just discovered this is needed for module auto-loading. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 8月, 2005 1 次提交
-
-
由 NeilBrown 提交于
We weren't actually waking up the md thread after setting MD_RECOVERY_NEEDED when assembling an array, so it is possible to lose a race and not actually start resync. So add a call to md_wakeup_thread, and while we are at it, remove all the "if (mddev->thread)" guards as md_wake_thread does its own checking. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 19 8月, 2005 1 次提交
-
-
由 NeilBrown 提交于
... otherwise we might try to load a bitmap from an array which hasn't one. The bug is that if you create an array with an internal bitmap, shut it down, and then create an array with the same md device, the md drive will assume it should have a bitmap too. As the array can be created with a different md device, it is mostly an inconvenience. I'm pretty sure there is no risk of data corruption. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 8月, 2005 6 次提交
-
-
由 Alasdair G Kergon 提交于
This code was never designed to handle more than one instance of do_work() running at once. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
The recent change to never ignore the bitmap, revealed that the bitmap isn't begin flushed properly when an array is stopped. We call bitmap_daemon_work three times as there is a three-stage pipeline for flushing updates to the bitmap file. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Firstly, R1BIO_Degraded was being set in a number of places in the resync code, but is never used there, so get rid of those settings. Then: When doing a resync, we want to clear the bit in the bitmap iff the array will be non-degraded when the sync has completed. However the current code would clear the bitmap if the array was non-degraded when the resync *started*, which obviously isn't right (it is for 'resync' but not for 'recovery' - i.e. rebuilding a failed drive). This patch calculated 'still_degraded' and uses the to tell bitmap_start_sync whether this sync should clear the corresponding bit. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
The code currently will ignore the bitmap if the array seem to be in-sync. This is wrong if the array is degraded, and probably wrong anyway. If the bitmap says some chunks are not in in-sync, and the superblock says everything IS in sync, then something is clearly wrong, and it is safer to trust the bitmap. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Until the bitmap code was added, modprobe md would load the md module. But now the md module is called 'md-mod', so we really need an alias for backwards comparability. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 8月, 2005 1 次提交
-
-
由 NeilBrown 提交于
The default resync_max_sector is set to "mddev->size << 1". If the raid-personality-module updates mddev->size, it must update resync_max_sectors too. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 7月, 2005 3 次提交
-
-
由 Alasdair G Kergon 提交于
This patch is an attempt to fix deadlocks discovered in the core dm. The problems boil down to md->lock having to be held in too many places, so I've split it into two: md->suspend_lock and md->io_lock. suspend_lock is now held throughout dm_suspended() as well as dm_resume() and dm_swap_table() so that these functions cannot run concurrently: there's no requirement for that and it added complexity. DMF_FS_LOCKED becomes redundant: DMF_SUSPENDED provides adequate protection. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
Avoid another bdget_disk which can deadlock. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
Some code tidy-ups in preparation for the next patches. Change dm_table_pre/postsuspend_targets to accept NULL. Use dm_suspended() throughout. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 7月, 2005 3 次提交
-
-
由 Jesper Juhl 提交于
`gcc -W' likes to complain if the static keyword is not at the beginning of the declaration. This patch fixes all remaining occurrences of "inline static" up with "static inline" in the entire kernel tree (140 occurrences in 47 files). While making this change I came across a few lines with trailing whitespace that I also fixed up, I have also added or removed a blank line or two here and there, but there are no functional changes in the patch. Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Hering 提交于
turn many #if $undefined_string into #ifdef $undefined_string to fix some warnings after -Wno-def was added to global CFLAGS Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Without this, and attempt to 'grow' an array will claim to have synced the extra part without actually having done anything. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 16 7月, 2005 2 次提交
-
-
由 NeilBrown 提交于
We need to be careful differentiating between a resync of a complete array, in which we can clear the bitmap, and a resync of a degraded array, in which we cannot. This patch cleans all that up. Cc: Paul Clements <paul.clements@steeleye.com> Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Neil Brown 提交于
Apparently sector_div is only guaranteed to work with a 32bit divisor, even on 64bit architectures. So allow for this in raid0. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 7月, 2005 1 次提交
-
-
由 Alasdair G Kergon 提交于
Handle writes to a snapshot-origin device that has been extended since the snapshot was taken. Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-