* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: pcm: fix infinite loop in snd_pcm_update_hw_ptr0()
  ALSA: HDA: Add dock mic quirk for Lenovo Thinkpad X220
  ALSA: ens1371: fix Creative Ectiva support
  ALSA: firewire-speakers: fix hang when unplugging a running device
  ASoC: Fix CODEC device name for Corgi
  ALSA: hda - Fix pin-config of Gigabyte mobo
  ASoC: imx: fix burstsize for DMA
  ASoC: imx: set watermarks for mx2-dma
  ASoC: twl6040: Return -ENOMEM if create_singlethread_workqueue fails
  ASoC: tlv320dac33: Restore L/R DAC power control register
  ASoC: Explicitly say registerless widgets have no register
  ASoC: tlv320dac33: Fix inconsistent spinlock usage

When period interrupts are disabled, snd_pcm_update_hw_ptr0() compares
the current time against the time estimated for the current hardware
pointer to detect xruns.  The somewhat fuzzy threshold in the while loop
makes it possible that hdelta becomes negative; the comparison being
done with unsigned types then makes the loop go through the entire 263
negative range, and, depending on the value, never reach an unsigned
value that is small enough to stop the loop.  Doing this with interrupts
disabled results in the machine locking up.

To prevent this, ensure that the loop condition uses signed types for
both operands so that the comparison is correctly done.

Many thanks to Kelly Anderson for debugging this.
Reported-by: NNix <nix@esperi.org.uk>
Reported-by: N"Christopher K." <c.krooss@googlemail.com>
Reported-and-tested-by: NKelly Anderson <kelly@silka.with-linux.com>
Signed-off-by: NKelly Anderson <kelly@silka.with-linux.com>
[cl: remove unneeded casts; use a temp variable]
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Cc: 2.6.38 <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  kdump: Allow shrinking of kdump region to be overridden
  powerpc/pmac/smp: Remove no-longer needed preempt workaround
  powerpc/smp: Increase vdso_data->processorCount, not just decrease it
  powerpc/smp: Create idle threads on demand and properly reset them
  powerpc/smp: Don't expose per-cpu "cpu_state" array
  powerpc/pmac/smp: Fix CPU hotplug crashes on some machines
  powerpc/smp: Add a smp_ops->bringup_up() done callback
  powerpc/pmac: Rename cpu_state in therm_pm72 to avoid collision
  powerpc/pmac/smp: Properly NAP offlined CPU on G5
  powerpc/pmac/smp: Remove HMT changes for PowerMac offline code
  powerpc/pmac/smp: Consolidate 32-bit and 64-bit PowerMac cpu_die in one file
  powerpc/pmac/smp: Fixup smp_core99_cpu_disable() and use it on 64-bit
  powerpc/pmac/smp: Rename fixup_irqs() to migrate_irqs() and use it on ppc32
  powerpc/pmac/smp: Fix 32-bit PowerMac cpu_die
  powerpc/smp: Remove unused smp_ops->cpu_enable()
  powerpc/smp: Remove unused generic_cpu_enable()
  powerpc/smp: Fix generic_mach_cpu_die()
  powerpc/smp: soft-replugged CPUs must go back to start_secondary
  powerpc: Make decrementer interrupt robust against offlined CPUs

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc32: Pass task_struct to schedule_tail() in ret_from_fork
  apbuart: Depend upon sparc.
  sparc64: Fix section mis-match errors.
  sparc32,leon: Fixed APBUART frequency detection
  sparc32, leon: APBUART driver must use archdata to get IRQ number
  sparc: Hook up syncfs system call.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  appletalk: Fix OOPS in atalk_release().
  mlx4: Fixing bad size of event queue buffer
  mlx4: Fixing use after free
  bonding:typo in comment
  sctp: Pass __GFP_NOWARN to hash table allocation attempts.
  connector: convert to synchronous netlink message processing
  fib: add rtnl locking in ip_fib_net_exit
  atm/solos-pci: Don't flap VCs when carrier state changes
  atm/solos-pci: Don't include frame pseudo-header on transmit hex-dump
  atm/solos-pci: Use VPI.VCI notation uniformly.
  Atheros, atl2: Fix mem leaks in error paths of atl2_set_eeprom
  netdev: fix mtu check when TSO is enabled
  net/usb: Ethernet quirks for the LG-VL600 4G modem
  phylib: phy_attach_direct: phy_init_hw can fail, add cleanup
  bridge: mcast snooping, fix length check of snooped MLDv1/2
  via-ircc: Pass PCI device pointer to dma_{alloc, free}_coherent()
  via-ircc: Use pci_{get, set}_drvdata() instead of static pointer variable
  net: gre: provide multicast mappings for ipv4 and ipv6
  bridge: Fix compilation warning in function br_stp_recalculate_bridge_id()
  net: Fix warnings caused by MAX_SKB_FRAGS change.

On ppc64 the crashkernel region almost always overlaps an area of firmware.
This works fine except when using the sysfs interface to reduce the kdump
region. If we free the firmware area we are guaranteed to crash.

Rename free_reserved_phys_range to crash_free_reserved_phys_range and make
it a weak function so we can override it.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The generic code properly re-initializes the preempt count in the
idle thread now
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Instead of creating idle threads at boot for all possible CPUs, we
create them on demand, like x86 or ARM, and we properly call init_idle
to re-initialize an idle thread when a CPU was unplugged and is now
re-plugged.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Instead, keep it static, expose an accessor and use that from
the PowerMac code. Avoids easy namespace collisions and will
make it easier to consolidate with other implementations.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On some machines that use i2c to synchronize the timebases (such
as PowerMac7,2/7,3 G5 machines), hotplug CPU would crash when
putting back a new CPU online due to the underlying i2c bus being
closed.

This uses the newly added bringup_done() callback to move the close
along with other housekeeping calls, and adds a CPU notifier to
re-open the i2c bus around subsequent hotplug operations
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This allows us to stop abusing smp_ops->setup_cpu() for cleanup
tasks that have to take place after the initial boot time CPU
bringup.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This collides with the cpu_state in our SMP code, use processor_state
instead.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The current code soft-disables, and then goes to NAP mode which
turns interrupts on. That means that if an interrupt occurs, we
will hit the masked interrupt code path which isn't what we want,
as it will return with EE off, which will either get us out of
NAP mode, or fail to enter it (according to spec).

Instead, let's just rely on the fact that it is safe to take
decrementer interrupts on an offline CPU and leave interrupts
enabled. We can also get rid of the special case in asm for
power4_cpu_offline_powersave() and just use power4_idle().
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Those instructions do nothing on non-threaded processors such
as 970's used on those machines.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use the generic code, just add the MPIC priority setting,

I don't see any use in mucking around with the decrementer,
as 32-bit will have EE off all along, and 64-bit will be able
to deal with it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use generic cpu_state, call idle_task_exit() properly, and
remove smp_core99_cpu_die() which isn't useful, the generic
function does the job just fine.

Remove the last remnants of cpu_enable(), everybody uses the normal
__cpu_up() path now
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Nobody uses it, besides we should always use the normal __cpu_up
path anyways
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This is used by some "soft" hotplug implementations. I needs to
call idle_task_exit() when the CPU is going away, and we remove
the now no-longer needed set_cpu_online() and local_irq_enable()
which are handled by the return to start_secondary
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Various thing are torn down when a CPU is hot-unplugged. That CPU
is expected to go back to start_secondary when re-plugged to re
initialize everything, such as clock sources, maps, ...

Some implementations just return from cpu_die() callback
in the idle loop when the CPU is "re-plugged". This is not enough.

We fix it using a little asm trampoline which resets the stack
and calls back into start_secondary as if we were all fresh from
boot. The trampoline already existed on ppc64, but we add it for
ppc32
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

With some implementations, it is possible that a timer interrupt
occurs every few seconds on an offline CPU. In this case, just
re-arm the decrementer and return immediately
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit 60d9f461 ("appletalk: remove
the BKL") added a dereference of "sk" before checking for NULL in
atalk_release().

Guard the code block completely, rather than partially, with the
NULL check.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This quirk is needed for the docking station mic of
Lenovo Thinkpad X220 to function correctly.

BugLink: http://bugs.launchpad.net/bugs/746259
Cc: stable@kernel.org
Tested-by: NJames Ferguson <james.ferguson@canonical.com>
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We should reduce the number of reserved completion queues from the total
number of entries. Since the queue size is power of two, not reducing the
reserved entries, caused a double queue size, which may lead to allocation
failures in some cases.
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case of allocation failure, tried to use the promiscuous QP
entry that was previously freed.
Now freeing this entry only in case we will not put it back to the list
of promiscuous entries.
Reported-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

use accumulates instead of acumulates.
Signed-off-by: NPan Weiping <panweiping3@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have to pass task_struct of previous process to function
schedule_tail(). Currently in ret_from_fork previous thread_info
is passed:

switch_to: mov %g6, %g3 /* previous thread_info in g6 */

ret_from_fork: call    schedule_tail
                mov    %g3, %o0 /* previous thread_info is passed */

void schedule_tail(struct task_struct *prev);
Signed-off-by: NTkhai Kirill <tkhai@yandex.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It absolutely needs to be able to get at pdev_archdata members
which are sparc specific.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>

Like DCCP and other similar pieces of code, there are mechanisms
here to try allocating smaller hash tables if the allocation
fails.  So pass in __GFP_NOWARN like the others do instead of
emitting a scary message.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix all of the problems spotted by CONFIG_DEBUG_SECTION_MISMATCH under
arch/sparc during a 64-bit defconfig build.

They fall into two categorites:

1) of_device_id is marked as __initdata, and we can never do this
   since these objects sit in the device core data structures way
   past boot.  So even if a driver will never be reloaded, we have
   to keep the device ID table around.

   Mark such cases const instead.

2) The bootmem alloc/free handling code in mdesc.c was not fully
   marked __init as it should be, thus generating a reference
   to free_bootmem_late() (which is __init) from non-__init code.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commits 01a16b21 (netlink: kill eff_cap from struct netlink_skb_parms)
and c53fa1ed (netlink: kill loginuid/sessionid/sid members from struct
netlink_skb_parms) removed some members from struct netlink_skb_parms
that depend on the current context, all netlink users are now required
to do synchronous message processing.

connector however queues received messages and processes them in a work
queue, which is not valid anymore. This patch converts connector to do
synchronous message processing by invoking the registered callback handler
directly from the netlink receive function.

In order to avoid invoking the callback with connector locks held, a
reference count is added to struct cn_callback_entry, the reference
is taken when finding a matching callback entry on the device's queue_list
and released after the callback handler has been invoked.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel J Blueman reported a lockdep splat in trie_firstleaf(), caused by
RTNL being not locked before a call to fib_table_flush()
Reported-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't flap VCs when carrier state changes; higher-level protocols
can detect loss of connectivity and act accordingly. This is more
consistent with how other network interfaces work.

We no longer use release_vccs() so we can delete it.

release_vccs() was duplicated from net/atm/common.c; make the
corresponding function exported, since other code duplicates it
and could leverage it if it were public.
Signed-off-by: NPhilip A. Prindeville <philipp@redfish-solutions.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Omit pkt_hdr preamble when dumping transmitted packet as hex-dump;
we can pull this up because the frame has already been sent, and
dumping it is the last thing we do with it before freeing it.

Also include the size, vpi, and vci in the debug as is done on
receive.

Use "port" consistently instead of "device" intermittently.
Signed-off-by: NPhilip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use VPI.VCI notation consistently throughout the module. This is the
one remaining place where the VCI is used before the VPI in any output.
Signed-off-by: NPhilip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix build breakage - sn_force_interrupt_flag: undefined