sys_get_thread_area does not memset to 0 its struct user_desc info before
copying it to user space...  since sizeof(struct user_desc) is 16 while the
actual datas which are filled are only 12 bytes + 9 bits (across the
bitfields), there is a (small) information leak.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These days %gs is normally the TLS segment, so it's no longer zero.  As
a result, we shouldn't just assume that %fs/%gs tend to be zero
together, but test them independently instead.

Also, fix setting of debug registers to use the "next" pointer instead
of "current".  It so happens that the scheduler will have set the new
current pointer before calling __switch_to(), but that's just an
implementation detail.

I believe at least for seccomp it's worth to turn off the tsc, not just for
HT but for the L2 cache too.  So it's up to you, either you turn it off
completely (which isn't very nice IMHO) or I recommend to apply this below
patch.

This has been tested successfully on x86-64 against current cogito
repository (i686 compiles so I didn't bother testing ;).  People selling
the cpu through cpushare may appreciate this bit for a peace of mind.

There's no way to get any timing info anymore with this applied
(gettimeofday is forbidden of course).  The seccomp environment is
completely deterministic so it can't be allowed to get timing info, it has
to be deterministic so in the future I can enable a computing mode that
does a parallel computing for each task with server side transparent
checkpointing and verification that the output is the same from all the 2/3
seller computers for each task, without the buyer even noticing (for now
the verification is left to the buyer client side and there's no
checkpointing, since that would require more kernel changes to track the
dirty bits but it'll be easy to extend once the basic mode is finished).

Eliminating a cold-cache read of the cr4 global variable will save one
cacheline during the tlb flush while making the code per-cpu-safe at the
same time.  Thanks to Mikael Pettersson for noticing the tlb flush wasn't
per-cpu-safe.

The global tlb flush can run from irq (IPI calling do_flush_tlb_all) but
it'll be transparent to the switch_to code since the IPI won't make any
change to the cr4 contents from the point of view of the interrupted code
and since it's now all per-cpu stuff, it will not race.  So no need to
disable irqs in switch_to slow path.
Signed-off-by: NAndrea Arcangeli <andrea@cpushare.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean CPU states in order to reuse smp boot code for CPU hotplug.

Signed-off-by: Li Shaohua<shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Trival patch for CPU hotplug.  In CPU identify part, only did cleaup for intel
CPUs.  Need do for other CPUs if they support S3 SMP.

Signed-off-by: Li Shaohua<shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

(The i386 CPU hotplug patch provides infrastructure for some work which Pavel
is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua
<shaohua.li@intel.com> is doing)

The following provides i386 architecture support for safely unregistering and
registering processors during runtime, updated for the current -mm tree.  In
order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the
cpu_online check in do_IRQ() by modifying fixup_irqs().  The difference being
that on cpu offline, fixup_irqs() is called before we clear the cpu from
cpu_online_map and a long delay in order to ensure that we never have any
queued external interrupts on the APICs.  There are additional changes to s390
and ppc64 to account for this change.

1) Add CONFIG_HOTPLUG_CPU
2) disable local APIC timer on dead cpus.
3) Disable preempt around irq balancing to prevent CPUs going down.
4) Print irq stats for all possible cpus.
5) Debugging check for interrupts on offline cpus.
6) Hacky fixup_irqs() to redirect irqs when cpus go off/online.
7) play_dead() for offline cpus to spin inside.
8) Handle offline cpus set in flush_tlb_others().
9) Grab lock earlier in smp_call_function() to prevent CPUs going down.
10) Implement __cpu_disable() and __cpu_die().
11) Enable local interrupts in cpu_enable() after fixup_irqs()
12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus.
13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline.
Signed-off-by: NZwane Mwaikambo <zwane@linuxpower.ca>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds function-return probes to kprobes for the i386
architecture.  This enables you to establish a handler to be run when a
function returns.

1. API

Two new functions are added to kprobes:

	int register_kretprobe(struct kretprobe *rp);
	void unregister_kretprobe(struct kretprobe *rp);

2. Registration and unregistration

2.1 Register

  To register a function-return probe, the user populates the following
  fields in a kretprobe object and calls register_kretprobe() with the
  kretprobe address as an argument:

  kp.addr - the function's address

  handler - this function is run after the ret instruction executes, but
  before control returns to the return address in the caller.

  maxactive - The maximum number of instances of the probed function that
  can be active concurrently.  For example, if the function is non-
  recursive and is called with a spinlock or mutex held, maxactive = 1
  should be enough.  If the function is non-recursive and can never
  relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should
  be enough.  maxactive is used to determine how many kretprobe_instance
  objects to allocate for this particular probed function.  If maxactive <=
  0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 *
  NR_CPUS) else maxactive=NR_CPUS)

  For example:

    struct kretprobe rp;
    rp.kp.addr = /* entrypoint address */
    rp.handler = /*return probe handler */
    rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */
    register_kretprobe(&rp);

  The following field may also be of interest:

  nmissed - Initialized to zero when the function-return probe is
  registered, and incremented every time the probed function is entered but
  there is no kretprobe_instance object available for establishing the
  function-return probe (i.e., because maxactive was set too low).

2.2 Unregister

  To unregiter a function-return probe, the user calls
  unregister_kretprobe() with the same kretprobe object as registered
  previously.  If a probed function is running when the return probe is
  unregistered, the function will return as expected, but the handler won't
  be run.

3. Limitations

3.1 This patch supports only the i386 architecture, but patches for
    x86_64 and ppc64 are anticipated soon.

3.2 Return probes operates by replacing the return address in the stack
    (or in a known register, such as the lr register for ppc).  This may
    cause __builtin_return_address(0), when invoked from the return-probed
    function, to return the address of the return-probes trampoline.

3.3 This implementation uses the "Multiprobes at an address" feature in
    2.6.12-rc3-mm3.

3.4 Due to a limitation in multi-probes, you cannot currently establish
    a return probe and a jprobe on the same function.  A patch to remove
    this limitation is being tested.

This feature is required by SystemTap (http://sourceware.org/systemtap),
and reflects ideas contributed by several SystemTap developers, including
Will Cohen and Ananth Mavinakayanahalli.
Signed-off-by: NHien Nguyen <hien@us.ibm.com>
Signed-off-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@laposte.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use the user_mode macro where it's possible.
Signed-off-by: NVincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make use of the 2 new macro set_debugreg and get_debugreg.
Signed-off-by: NVincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* EXPORT_SYMBOL's moved to other files
* #include <linux/config.h>, <linux/module.h> where needed
* #include's in i386_ksyms.c cleaned up
* After copy-paste, redundant due to Makefiles rules preprocessor directives
  removed:

	#ifdef CONFIG_FOO
	EXPORT_SYMBOL(foo);
	#endif

	obj-$(CONFIG_FOO) += foo.o

* Tiny reformat to fit in 80 columns
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The recent change fix-crash-in-entrys-restore_all.patch

 	childregs->esp = esp;

 	p->thread.esp = (unsigned long) childregs;
-	p->thread.esp0 = (unsigned long) (childregs+1);
+	p->thread.esp0 = (unsigned long) (childregs+1) - 8;

 	p->thread.eip = (unsigned long) ret_from_fork;

introduces an inconsistency between esp and esp0 before the task is run the
first time.  esp0 is no longer the actual start of the stack, but 8 bytes
off.

This shows itself clearly in a scenario when a ptracer that is set to also
ptrace eventual children traces program1 which then clones thread1.  Now
the ptracer wants to modify the registers of thread1.  The x86 ptrace
implementation bases it's knowledge about saved user-space registers upon
p->thread.esp0.  But this will be a few bytes off causing certain writes to
the kernel stack to overwrite a saved kernel function address making the
kernel when actually running thread1 jump out into user-space.  Very
spectacular.

The testcase I've used is:
/* start with strace -f ./a.out */
#include <pthread.h>
#include <stdio.h>

void *do_thread(void *p)
{
	for (;;);
}

int main()
{
	pthread_t one;
	pthread_create(&one, NULL, &do_thread, NULL);
	for (;;);
	return 0;
}

So, my solution is to instead of just adjusting esp0 that creates an
inconsitent state I adjust where the user-space registers are saved with -8
bytes.  This gives us the wanted extra bytes on the start of the stack and
esp0 is now correct.  This solves the issues I saw from the original
testcase from Mateusz Berezecki and has survived testing here.  I think
this should go into -mm a round or two first however as there might be some
cruft around depending on pt_regs lying on the start of the stack.  That
however would have broken with the first change too!

It's actually a 2-line diff but I had to move the comment of why the -8 bytes
are there a few lines up. Thanks to Zwane for helping me with this.
Signed-off-by: NAlexander Nyberg <alexn@telia.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The new i386/x86_64 assemblers no longer accept instructions for moving
between a segment register and a 32bit memory location, i.e.,

        movl (%eax),%ds
        movl %ds,(%eax)

To generate instructions for moving between a segment register and a
16bit memory location without the 16bit operand size prefix, 0x66,

        mov (%eax),%ds
        mov %ds,(%eax)

should be used. It will work with both new and old assemblers. The
assembler starting from 2.16.90.0.1 will also support

        movw (%eax),%ds
        movw %ds,(%eax)

without the 0x66 prefix. I am enclosing patches for 2.4 and 2.6 kernels
here. The resulting kernel binaries should be unchanged as before, with
old and new assemblers, if gcc never generates memory access for

               unsigned gsindex;
               asm volatile("movl %%gs,%0" : "=g" (gsindex));

If gcc does generate memory access for the code above, the upper bits
in gsindex are undefined and the new assembler doesn't allow it.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This moves the macro loaddebug from asm-i386/suspend.h to
asm-i386/processor.h, which is the place that makes sense for it to be
defined, removes the extra copy of the same macro in
arch/i386/kernel/process.c, and makes arch/i386/kernel/signal.c use the
macro in place of its expansion.

This is a purely cosmetic cleanup for the normal i386 kernel.  However, it
is handy for Xen to be able to just redefine the loaddebug macro once
instead of also changing the signal.c code.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the access-above-bottom-of-stack crash.

1. Allows to preserve the valueable optimization

2. Works for NMIs

3.  Doesn't care whether or not there are more of the like instances
   where the stack is left empty.

4. Seems to work for me without the crashes:) 

(akpm: this is still under discussion, although I _think_ it's OK.  You might
want to hold off)

Signed-off-by: Stas Sergeev <stsp@aknet.ru> 
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!