- 06 5月, 2010 1 次提交
-
-
由 Valentin Longchamp 提交于
Since it is finally used on the handbot as a configuration input for the translator. Signed-off-by: NValentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 03 5月, 2010 5 次提交
-
-
由 Dinh Nguyen 提交于
Update mx51_defconfig to include USB EHCI by default. This patch applies to 2.6.34-rc6. Signed-off-by: NDinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Dinh Nguyen 提交于
This patch adds USB HW initializiation code to /plat-mxc/ehci.c. -Sets some specific PHY settings Renames mxc_set_usbcontrol to mxc_initialize_usb_hw. Adds new register bit defines for the USB HW on Freescale SoCs. This patch applies to 2.6.34-rc6. Signed-off-by: NDinh Nguyen <Dinh.Nguyen@freescale.com> Reviewed-by: NDaniel Mack <daniel@caiaq.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Dinh Nguyen 提交于
This patch enables USB host functionality for Host1 and OTG port on Freescale MX51 Babbage HW. This patch contains the board specific HW initialization of the USB HW. This patch applies to 2.6.34-rc6. Signed-off-by: NDinh Nguyen <Dinh.Nguyen@freescale.com> Reviewed-by: NDaniel Mack <daniel@caiaq.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Dinh Nguyen 提交于
This patch is part of enabling USB for Freescale MX51 Babbage HW. This patch adds device structures for USB Host1 and OTG port, and adds clocking information for USB HW. This patch applies to 2.6.34-rc6. Signed-off-by: NDinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Dinh Nguyen 提交于
This patch is part of enabling USB for Freescale MX51 Babbage HW. This patch updates the iomux pins for USB, and gpio line for reset the USB hub on the MX51 Babbage HW. This patch applies to 2.6.34-rc6. Signed-off-by: NDinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 23 4月, 2010 1 次提交
-
-
由 Wolfram Sang 提交于
Commit "mxc: Change gpt timer code to be more generic by using V2 instead of MX3" forgot to replace one occurence causing a build failure. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Amit Kucheria <amit.kucheria@canonical.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 22 4月, 2010 2 次提交
-
-
由 Dinh Nguyen 提交于
Register the gpio irqs on Freescale's MX51 Babbage HW. Signed-off-by: NDinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: NAmit Kucheria <amit.kucheria@canonical.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Amit Kucheria 提交于
Replace mx3_ with v2_ since the register layout is the same for all SoCs using version 2 of the timer (mx25, mx31, mx37 and now mx51) Signed-off-by: NAmit Kucheria <amit.kucheria@canonical.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 14 4月, 2010 12 次提交
-
-
由 Daniel Mack 提交于
MX3 SoCs have a silicon bug which corrupts CRC calculation of multi-block transfers when connected SDIO peripheral doesn't drive the BUSY line as required by the specs. One way to prevent this is to only allow 1-bit transfers. Another way is playing tricks with the DMA engine, but this isn't mainline yet. So for now, we live with the performance drawback of 1-bit transfers until a nicer solution is found. This patch introduces a new host controller callback 'init_card' which is for now only called from mmc_sdio_init_card(). Signed-off-by: NDaniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Volker Ernst <volker.ernst@txtr.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Michał Mirosław <mirqus@gmail.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Daniel Mack 提交于
Successfully tested on MX31 hardware using libertas SDIO peripherals. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Volker Ernst <volker.ernst@txtr.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Michał Mirosław <mirqus@gmail.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Daniel Mack 提交于
Be more verbose on error messages and add one debug message. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Volker Ernst <volker.ernst@txtr.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Michał Mirosław <mirqus@gmail.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Daniel Mack 提交于
Signed-off-by: NDaniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Ivo Clarysse 提交于
On i.MX21 SoCs, if the NFC_CONFIG1:NFC_INT_MASK bit is set, NFC_CONFIG2:NFC_INT always reads out zero, even if an operation is completed. This patch uses enable_irq and disable_irq_nosync instead of NFC_CONFIG1:NFC_INT_MASK to mask NFC interrupts. This allows NFC_CONFIG2:NFC_INT to also be used to detect operation completion on i.MX21. The i.MX21 NFC does not signal reset completion using NFC_CONFIG1:NFC_INT_MASK, so instead reset completion is tested by checking if NFC_CONFIG2 becomes 0. Signed-off-by: NIvo Clarysse <ivo.clarysse@gmail.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Ivo Clarysse 提交于
This patch allows the mxc_nand driver to reset the NAND flash controller. NFC registers are (re-)set after completion of the reset, as a reset will have reverted the NFC registers to their default values. Signed-off-by: NIvo Clarysse <ivo.clarysse@gmail.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Vladimir Zapolskiy 提交于
This patch adds support for SoC build-in RTC device on litekit board. Signed-off-by: NVladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Vladimir Zapolskiy 提交于
This patch adds support for build-in RTC device found on Freescale imx31 and imx35 SoCs. Signed-off-by: NVladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: user.c, fix SNAPSHOT_SET_SWAP_AREA handling
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFSv4: fix delegated locking NFS: Ensure that the WRITE and COMMIT RPC calls are always uninterruptible NFS: Fix a race with the new commit code NFS: Ensure that writeback_single_inode() calls write_inode() when syncing NFS: Fix the mode calculation in nfs_find_open_context NFSv4: Fall back to ordinary lookup if nfs4_atomic_open() returns EISDIR
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Add some more commentary to __raw_local_irq_save() sparc64: Fix memory leak in pci_register_iommu_region(). sparc64: Add kmemleak annotation to sun4v_build_virq() sparc64: Support kmemleak. sparc64: Add function graph tracer support. sparc64: Give a stack frame to the ftrace call sites. sparc64: Use a seperate counter for timer interrupts and NMI checks, like x86. sparc64: Remove profiling from some low-level bits. sparc64: Kill unnecessary static on local var in ftrace_call_replace(). sparc64: Kill CONFIG_STACK_DEBUG code. sparc64: Add HAVE_FUNCTION_TRACE_MCOUNT_TEST and tidy up. sparc64: Adjust __raw_local_irq_save() to cooperate in NMIs. sparc64: Use kstack_valid() in die_if_kernel().
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits) smc91c92_cs: define multicast_table as unsigned char can: avoids a false warning e1000e: stop cleaning when we reach tx_ring->next_to_use igb: restrict WoL for 82576 ET2 Quad Port Server Adapter virtio_net: missing sg_init_table Revert "tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb" iwlwifi: need check for valid qos packet before free tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb udp: fix for unicast RX path optimization myri10ge: fix rx_pause in myri10ge_set_pauseparam net: corrected documentation for hardware time stamping stmmac: use resource_size() x.25 attempts to negotiate invalid throughput x25: Patch to fix bug 15678 - x25 accesses fields beyond end of packet. bridge: Fix IGMP3 report parsing cnic: Fix crash during bnx2x MTU change. qlcnic: fix set mac addr r6040: fix r6040_multicast_list vhost-net: fix vq_memory_access_ok error checking ath9k: fix double calls to ath_radio_enable ...
-
- 13 4月, 2010 19 次提交
-
-
由 Ken Kawasaki 提交于
smc91c92_cs: * define multicast_table as unsigned char * remove unnecessary "#ifndef final_version" Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
At this point optlen == sizeof(sfilter) but some compilers are dumb. Reported-by: Németh Márton <nm127@freemail.h Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NOliver Hartkopp <oliver@hartkopp.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Terry Loftin 提交于
Tx ring buffers after tx_ring->next_to_use are volatile and could change, possibly causing a crash. Stop cleaning when we hit tx_ring->next_to_use. Signed-off-by: NTerry Loftin <terry.loftin@hp.com> Acked-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Assmann 提交于
Restrict Wake-on-LAN to first port on 82576 ET2 quad port NICs, as it is only supported there. Signed-off-by: NStefan Assmann <sassmann@redhat.com> Acked-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Suggested by Peter Zijlstra Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Conflicts: lib/Kconfig.debug
-
由 David S. Miller 提交于
Found by kmemleak. If request_resource() fails, we leak the struct resource we allocated to represent the IOMMU mapping area. This actually happens on sun4v machines because the IOMEM area is only reported sans the IOMMU region, unlike all previous systems. I'll need to fix that at some point, but for now fix the leak. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The only reference we store to this memory is in the form of a physical address, so kmemleak can't see it. Add a kmemleak_not_leak() annotation. It's probably useful to be able to look at a dump of these things either via debugfs or similar, and thus we could at some point store them in some kind of table and therefore get rid of this annotation. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Only missing thing was an _sdata marker in vmlinux.lds.S Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It's the only way we'll be able to implement the function graph tracer properly. A positive is that we no longer have to worry about the linker over-optimizing the tail call, since we don't use a tail call any more. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This keeps us from having to use kstat_irqs_cpu() from the NMI handler, the former of which is a profiled function. Instead we use a currently empty slot in the cpu_data Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
These include the timer implementation, perf events support, and the performance counter register (pcr) programming layer. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The generic stack tracer does this job just as well. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Check function_trace_stop at ftrace_caller Toss mcount_call and dummy call of ftrace_stub, unnecessary. Document problems we'll have if the final kernel image link ever turns on relaxation. Properly size 'ftrace_call' so it looks right when inspecting instructions under gdb et al. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
If we are in an NMI then doing a plain raw_local_irq_disable() will write PIL_NORMAL_MAX into %pil, which is lower than PIL_NMI, and thus we'll re-enable NMIs and recurse. Doing a simple: %pil = %pil | PIL_NORMAL_MAX does what we want, if we're already at PIL_NMI (15) we leave it at that setting, else we set it to PIL_NORMAL_MAX (14). This should get the function tracer working on sparc64. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This gets rid of a local function (is_kernel_stack()) which tries to do the same thing, yet poorly in that it doesn't handle IRQ stacks properly. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shirley Ma 提交于
Add missing sg_init_table for sg_set_buf in virtio_net which induced in defer skb patch. Reported-by: NThomas Müller <thomas@mathtm.de> Tested-by: NThomas Müller <thomas@mathtm.de> Signed-off-by: NShirley Ma <xma@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-