This is overly conservative and not flexible at all, so better let them
go through and let the filtering policy decide what to do with them. We
use skb_header_pointer() all over the place so we would just fail to
match when trying to access fields from malformed traffic.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Consolidate pktinfo setup and validation by using the new generic
functions so we converge to the netdev family codebase.

We only need a linear IPv4 and IPv6 header from the reject expression,
so move nft_bridge_iphdr_validate() and nft_bridge_ip6hdr_validate()
to net/bridge/netfilter/nft_reject_bridge.c.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

These functions are extracted from the netdev family, they initialize
the pktinfo structure and validate that the IPv4 and IPv6 headers are
well-formed given that these functions are called from a path where
layer 3 sanitization did not happen yet.

These functions are placed in include/net/netfilter/nf_tables_ipv{4,6}.h
so they can be reused by a follow up patch to use them from the bridge
family too.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Make sure the pktinfo protocol fields are initialized if this fails to
parse the transport header.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch introduces nft_set_pktinfo_unspec() that ensures proper
initialization all of pktinfo fields for non-IP traffic. This is used
by the bridge, netdev and arp families.

This new function relies on nft_set_pktinfo_proto_unspec() to set a new
tprot_set field that indicates if transport protocol information is
available. Remain fields are zeroed.

The meta expression has been also updated to check to tprot_set in first
place given that zero is a valid tprot value. Even a handcrafted packet
may come with the IPPROTO_RAW (255) protocol number so we can't rely on
this value as tprot unset.
Reported-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The dynset expression matches if we can fit a new entry into the set.
If there is no room for it, then it breaks the rule evaluation.

This patch introduces the inversion flag so you can add rules to
explicitly drop packets that don't fit into the set. For example:

 # nft filter input flow table xyz size 4 { ip saddr timeout 120s counter } overflow drop

This is useful to provide a replacement for connlimit.

For the rule above, every new entry uses the IPv4 address as key in the
set, this entry gets a timeout of 120 seconds that gets refresh on every
packet seen. If we get new flow and our set already contains 4 entries
already, then this packet is dropped.

You can already express this in positive logic, assuming default policy
to drop:

 # nft filter input flow table xyz size 4 { ip saddr timeout 10s counter } accept
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Add support to pass through an offset to the hash value. With this
feature, the sysadmin is able to generate a hash with a given
offset value.

Example:

	meta mark set jhash ip saddr mod 2 seed 0xabcd offset 100

This option generates marks according to the source address from 100 to
101.
Signed-off-by: NLaura Garcia Liebana <nevola@gmail.com>

After commit adf05168 ("netfilter: remove ip_conntrack* sysctl
compat code"), ctl_table_path member in struct nf_conntrack_l3proto{}
is not used anymore, remove it.
Signed-off-by: NLiping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Although the validation of queues_total and queuenum is checked in nft
utility, but user can add nft rules via nfnetlink, so it is necessary
to check the validation at the nft_queue expr init routine too.

Tested by run ./nft-test.py any/queue.t:
  any/queue.t: 6 unit tests, 0 error, 0 warning
Signed-off-by: NLiping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Current parsing methods for SIP headers do not allow the presence of
tab characters between header name and header value. As a result Call-ID
SIP headers like the following are discarded by IPVS SIP persistence
engine:

"Call-ID\t: mycallid@abcde"
"Call-ID:\tmycallid@abcde"

In above examples Call-IDs are represented as strings in C language.
Obviously in real message we have byte "09" before/after colon (":").

Proposed fix is in nf_conntrack_sip module.
Function sip_skip_whitespace() should skip tabs in addition to spaces,
since in SIP grammar whitespace (WSP) corresponds to space or tab.

Below is an extract of relevant SIP ABNF syntax.

Call-ID  =  ( "Call-ID" / "i" ) HCOLON callid
callid   =  word [ "@" word ]

HCOLON  =  *( SP / HTAB ) ":" SWS
SWS     =  [LWS] ; sep whitespace
LWS     =  [*WSP CRLF] 1*WSP ; linear whitespace
WSP     =  SP / HTAB
word    =  1*(alphanum / "-" / "." / "!" / "%" / "*" /
           "_" / "+" / "`" / "'" / "~" /
           "(" / ")" / "<" / ">" /
           ":" / "\" / DQUOTE /
           "/" / "[" / "]" / "?" /
           "{" / "}" )
Signed-off-by: NMarco Angaroni <marcoangaroni@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This is patch renames the existing function to nft_overquota() and make
it return a boolean that tells us if we have exceeded our byte quota.
Just a cleanup.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Use xor to decide to break further rule evaluation or not, since the
existing logic doesn't achieve the expected inversion.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The _until_ attribute is renamed to _modulus_ as the behaviour is similar to
other expresions with number limits (ex. nft_hash).

Renaming is possible because there isn't a kernel release yet with these
changes.
Signed-off-by: NLaura Garcia Liebana <nevola@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

There are some debug code which are commented out in find_pattern by #if 0.
Now remove them.
Signed-off-by: NGao Feng <fgao@ikuai8.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The caller function "help" has already make sure the datalen could not be zero
before invoke find_pattern as a parameter by the following codes

        if (dataoff >= skb->len) {
                pr_debug("ftp: dataoff(%u) >= skblen(%u)\n", dataoff,
                         skb->len);
                return NF_ACCEPT;
        }
        datalen = skb->len - dataoff;

And the latter codes "ends_in_nl = (fb_ptr[datalen - 1] == '\n');" use datalen
directly without checking if it is zero.

So it is unneccessary to check it in find_pattern too.
Signed-off-by: NGao Feng <fgao@ikuai8.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Current parsing methods for SIP header Call-ID do not check correctly all
characters allowed by RFC 3261. In particular "," character is allowed
instead of "'" character. As a result Call-ID headers like the following
are discarded by IPVS SIP persistence engine.

Call-ID: -.!%*_+`'~()<>:\"/[]?{}

Above example is composed using all non-alphanumeric characters listed
in RFC 3261 for Call-ID header syntax.

Proposed fix is in nf_conntrack_sip module; function iswordc() checks this
range: (c >= '(' && c <= '/') which includes these characters: ()*+,-./
They are all allowed except ",". Instead "'" is not included in the list.

Below is an extract of relevant SIP ABNF syntax.

Call-ID  =  ( "Call-ID" / "i" ) HCOLON callid
callid   =  word [ "@" word ]

HCOLON  =  *( SP / HTAB ) ":" SWS
SWS     =  [LWS] ; sep whitespace
LWS     =  [*WSP CRLF] 1*WSP ; linear whitespace
WSP     =  SP / HTAB
word    =  1*(alphanum / "-" / "." / "!" / "%" / "*" /
           "_" / "+" / "`" / "'" / "~" /
           "(" / ")" / "<" / ">" /
           ":" / "\" / DQUOTE /
           "/" / "[" / "]" / "?" /
           "{" / "}" )
Signed-off-by: NMarco Angaroni <marcoangaroni@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Current parsing methods for SIP headers do not properly manage
continuation lines: in case of Call-ID header the first character of
Call-ID header value is truncated. As a result IPVS SIP persistence
engine hashes over a call-id that is not exactly the one present in
the originale message.

Example: "Call-ID: \r\n abcdeABCDE1234"
results in extracted call-id equal to "bcdeABCDE1234".

In above example Call-ID is represented as a string in C language.
Obviously in real message the first bytes after colon (":") are
"20 0d 0a 20".

Proposed fix is in nf_conntrack_sip module.
Since sip_follow_continuation() function walks past the leading
spaces or tabs of the continuation line, sip_skip_whitespace()
should simply return the ouput of sip_follow_continuation().
Otherwise another iteration of the for loop is done and dptr
is incremented by one pointing to the second character of the
first word in the header.

Below is an extract of relevant SIP ABNF syntax.

Call-ID  =  ( "Call-ID" / "i" ) HCOLON callid
callid   =  word [ "@" word ]

HCOLON  =  *( SP / HTAB ) ":" SWS
SWS     =  [LWS] ; sep whitespace
LWS     =  [*WSP CRLF] 1*WSP ; linear whitespace
WSP     =  SP / HTAB
word    =  1*(alphanum / "-" / "." / "!" / "%" / "*" /
           "_" / "+" / "`" / "'" / "~" /
           "(" / ")" / "<" / ">" /
           ":" / "\" / DQUOTE /
           "/" / "[" / "]" / "?" /
           "{" / "}" )
Signed-off-by: NMarco Angaroni <marcoangaroni@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

netfilter: gre: Use consistent GRE and PTTP header structure instead of the ones defined by netfilter

There are two existing strutures which defines the GRE and PPTP header.
So use these two structures instead of the ones defined by netfilter to
keep consitent with other codes.
Signed-off-by: NGao Feng <fgao@ikuai8.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

There are already some GRE_* macros in kernel, so it is unnecessary
to define these macros. And remove some useless macros
Signed-off-by: NGao Feng <fgao@ikuai8.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

gpio_to_irq does not return NO_IRQ but instead returns a negative
error code on failure. Returning NO_IRQ from the function has no
negative effects as we only compare the result to the expected
interrupt number, but it's better to return a proper failure
code for consistency, and we should remove NO_IRQ from the kernel
entirely.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reported-by: NMa Yuying <yuma@redhat.com>
Suggested-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NBert Kenward <bkenward@solarflare.com>
Reviewed-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The newly added bpf_overflow_handler function is only built of both
CONFIG_EVENT_TRACING and CONFIG_BPF_SYSCALL are enabled, but the caller
only checks the latter:

kernel/events/core.c: In function 'perf_event_alloc':
kernel/events/core.c:9106:27: error: 'bpf_overflow_handler' undeclared (first use in this function)

This changes the caller so we also skip this call if CONFIG_EVENT_TRACING
is disabled entirely.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: aa6a5f3c ("perf, bpf: add perf events core support for BPF_PROG_TYPE_PERF_EVENT programs")
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We get 1 warning when building kernel with W=1:
drivers/net/ethernet/arc/emac_mdio.c:107:5: warning: no previous prototype for 'arc_mdio_reset' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
so this patch marks this function with 'static'.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We get a few warnings when building kernel with W=1:
drivers/net/usb/lan78xx.c:1182:6: warning: no previous prototype for 'lan78xx_defer_kevent' [-Wmissing-prototypes]
drivers/net/usb/lan78xx.c:1409:5: warning: no previous prototype for 'lan78xx_nway_reset' [-Wmissing-prototypes]
drivers/net/usb/lan78xx.c:2000:5: warning: no previous prototype for 'lan78xx_set_mac_addr' [-Wmissing-prototypes]
....

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds support for several infrastructure operations that are done as part of
debug data collection.
Signed-off-by: NTomer Tayar <Tomer.Tayar@qlogic.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Tested-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These messages are unnecessary as OOM allocation failures already do
a dump_stack() giving more or less the same information.

$ size drivers/net/ethernet/qlogic/qed/built-in.o* (defconfig x86-64)
   text	   data	    bss	    dec	    hex	filename
 127817	  27969	  32800	 188586	  2e0aa	drivers/net/ethernet/qlogic/qed/built-in.o.new
 132474	  27969	  32800	 193243	  2f2db	drivers/net/ethernet/qlogic/qed/built-in.o.old

Miscellanea:

o Change allocs to the generally preferred forms where possible.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'rxrpc-rewrite-20160904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
rxrpc: Split output code from sendmsg code

Here's a set of small patches that split the packet transmission code from
the sendmsg code and simply rearrange the new file to make it more
logically laid out ready for being rewritten.  An enum is also moved out of
the header file to there as it's only used there.  This needs to be applied
on top of the just-posted fixes patch set.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'rxrpc-rewrite-20160904-1' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
rxrpc: Small fixes

Here's a set of small fix patches:

 (1) Fix some uninitialised variables.

 (2) Set the client call state before making it live by attaching it to the
     conn struct.

 (3) Randomise the epoch and starting client conn ID values, and don't
     change the epoch when the client conn ID rolls round.

 (4) Replace deprecated create_singlethread_workqueue() calls.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If vxlan_build_skb return err < 0, tx_errors should be also increased.
Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Depending on the preempt mode, the bpf_prog stored in xdp_prog may be
freed despite the use of call_rcu inside bpf_prog_put. The situation is
possible when running in PREEMPT_RCU=y mode, for instance, since the rcu
callback for destroying the bpf prog can run even during the bh handling
in the mlx4 rx path.

Several options were considered before this patch was settled on:

Add a napi_synchronize loop in mlx4_xdp_set, which would occur after all
of the rings are updated with the new program.
This approach has the disadvantage that as the number of rings
increases, the speed of update will slow down significantly due to
napi_synchronize's msleep(1).

Add a new rcu_head in bpf_prog_aux, to be used by a new bpf_prog_put_bh.
The action of the bpf_prog_put_bh would be to then call bpf_prog_put
later. Those drivers that consume a bpf prog in a bh context (like mlx4)
would then use the bpf_prog_put_bh instead when the ring is up. This has
the problem of complexity, in maintaining proper refcnts and rcu lists,
and would likely be harder to review. In addition, this approach to
freeing must be exclusive with other frees of the bpf prog, for instance
a _bh prog must not be referenced from a prog array that is consumed by
a non-_bh prog.

The placement of rcu_read_lock in this patch is functionally the same as
putting an rcu_read_lock in napi_poll. Actually doing so could be a
potentially controversial change, but would bring the implementation in
line with sk_busy_loop (though of course the nature of those two paths
is substantially different), and would also avoid future copy/paste
problems with future supporters of XDP. Still, this patch does not take
that opinionated option.

Testing was done with kernels in either PREEMPT_RCU=y or
CONFIG_PREEMPT_VOLUNTARY=y+PREEMPT_RCU=n modes, with neither exhibiting
any drawback. With PREEMPT_RCU=n, the extra call to rcu_read_lock did
not show up in the perf report whatsoever, and with PREEMPT_RCU=y the
overhead of rcu_read_lock (according to perf) was the same before/after.
In the rx path, rcu_read_lock is eventually called for every packet
from netif_receive_skb_internal, so the napi poll call's rcu_read_lock
is easily amortized.

v2:
Remove extra rcu_read_lock in mlx4_en_process_rx_cq body
Annotate xdp_prog with __rcu, and convert all usages to rcu_assign or
rcu_dereference[_protected] as appropriate.
Add explicit mutex lock around rcu_assign instead of xchg loop.

Fixes: d576acf0 ("net/mlx4_en: add page recycle to prepare rx ring for tx support")
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sean Wang says:

====================
net: ethernet: mediatek: add enhancements to RX path

Changes since v1:
- fix message typos and add coverletter

Changes since v2:
- split from the previous series for submitting add enhancements as
a series targeting 'net-next' and add indents before comments.

Changes since v3:
- merge the patch using PDMA RX path
- fixed the input of mtk_poll_rx is with the remaining budget

Changes since v4:
- save one wmb and register update when no packet is being handled
inside mtk_poll_rx call
- fixed incorrect return packet count from mtk_napi_rx
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch adds support for aggregating more SKBs feed into NAPI in
order to get more benefits from generic receive offload (GRO) by
peeking at the RX ring status and moving more packets right before
returning from NAPI RX polling handler if NAPI budgets are still
available and some packets already present in hardware.
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch makes move wmb() to outside the loop that could help
RX path handling more faster although that RX descriptors aren't
freed for DMA to use as soon as possible, but based on my experiment
and the result shows it still can reach about 943Mbpis without
performance drop that is tested based on the setup with one port
using Giga PHY and 256 RX descriptors for DMA to move.
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Joe Perches says:

====================
hso: neatening

This seems to be the only code in the kernel that uses
macro defines with a trailing underscore.  Fix that.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use a more common logging style

Miscellanea:

o Add pr_fmt to prefix each output message
o Realign arguments
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Macros that end in an underscore are just odd.
Add hso_dbg(level, fmt, ...) and use it everwhere instead.

Several uses had additional unnecessary newlines as the
macro added a newline.  Remove the newline from the macro
and add newlines to each use as appropriate.

Remove now unused D<digit> macros.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add mdix control through ethtool.
Signed-off-by: NWoojung Huh <Woojung.huh@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add STRAP_STATUS defines.
Signed-off-by: NWoojung Huh <Woojung.huh@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>