- 04 4月, 2012 26 次提交
-
-
由 Emil Tantilov 提交于
This patch modifies ixgbe_get_pcie_msix_count_generic() to support all current HW and removes the 82598 specific function. - change the type of ixgbe_get_pcie_msix_count_generic() to u16 - include a check to make sure the maximum allowed number of vectors is not exceeded. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Some Rx and Tx specific registers are arrays indexed by the queue number. For clarity, specify the intended queue rather than obscuring it behind a define. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Rename NAPI polling routine and a parameter with more appropriate names, refactor a conditional branch to get rid of an unnecessary goto/label and fix a line exceeding 80 columns. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Matthew Vick 提交于
Move the first phrase of a multi-line comment to the second line. Signed-off-by: NMatthew Vick <matthew.vick@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Ben Greear 提交于
This allows the NIC to receive errored frames (bad FCS, etc) and pass them up the stack. This can be useful when using sniffers. Signed-off-by: NBen Greear <greearb@candelatech.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Yuval Mintz 提交于
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
A semantic patch, fixing style issues in the bnx2x's link code. Signed-off-by: NYaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
This patch revises the way by which rss are configured, removing an unnecessary module paramater and unrequired modes. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
The congestion management code has migrated into a common location, allowing all fw writes controlling mf congestion to be made in a single function in the code. This is a semantic change. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Barak Witkowski 提交于
Notice this patch includes lines with over 80 characters, as to not break strings. Signed-off-by: NBarak Witkowski <barak@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Restore remote-faule detection, which periodically checks for remote-fault on the MAC layer. In case physical link appear to be up but fault is set, it will provide a link down indication, and when the fault is cleared, it will indicate link up again. Signed-off-by: NYaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Until now, the bnx2x driver needed at least 2 available msix interrupt vectors in order to use msix. This patch add the possibility of configuring msix when only one interrupt vector is available. Notice this patch contains lines with over 80 characters, as it keeps print strings in a single line. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
During boot-from-SAN, if msix interrupts are unavailable and inta is requested, it is possible that inta would be disabled in the pci bus. This patch enables inta when requested. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Removed uninformative debug prints, as well as two functions which were hardly used in the code. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Srinivas Kandagatla 提交于
Compile tested. remove unnecessary code that matches this coccinelle pattern ret = phy_write(x, y , z) if (ret < 0) return ret; return 0; As phy_write returns error code, we dont need to do not need extra check before returning. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Srinivas Kandagatla 提交于
Compile tested. remove unnecessary code that matches this coccinelle pattern ret = phy_write(x, y , z) if (ret < 0) return ret; return 0; As phy_write returns error code, we dont need to do not need extra check before returning. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Srinivas Kandagatla 提交于
Compile tested. remove unnecessary code that matches this coccinelle pattern ret = phy_write(x, y , z) if (ret < 0) return ret; return 0; As phy_write returns error code, we dont need to do not need extra check before returning. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Akinobu Mita 提交于
Use for_each_set_bit_from to iterate over all the set bit in a memory region. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Kozlov <xeb@mail.ru> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Add XOR instruction fo BPF machine. Needed for computing packet hashes. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Today, BPF filters are bind to sockets. Since BPF machine becomes handy for other purposes, this patch allows to create unattached filter. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
This macro doesn't need a terminating ; so just remove it. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
In the existing code, we only stop queue when the ringbuffer is full, so the current packet has to be dropped or retried from upper layer. This patch stops the tx queue when available ringbuffer is below the low watermark. So the ringbuffer still has small amount of space available for the current packet. This will reduce the overhead of retries on sending. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lino Sanfilippo 提交于
In sky2_test_msi() the temporarily set SW IRQ in B0 register is not reset in case that request_irq() fails. With this patch we only set the interrupt mask if request_irq() was successful. Signed-off-by: NLino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
unix_dgram_sendmsg() currently builds linear skbs, and this can stress page allocator with high order page allocations. When memory gets fragmented, this can eventually fail. We can try to use order-2 allocations for skb head (SKB_MAX_ALLOC) plus up to 16 page fragments to lower pressure on buddy allocator. This patch has no effect on messages of less than 16064 bytes. (on 64bit arches with PAGE_SIZE=4096) For bigger messages (from 16065 to 81600 bytes), this patch brings reliability at the expense of performance penalty because of extra pages allocations. netperf -t DG_STREAM -T 0,2 -- -m 16064 -s 200000 ->4086040 Messages / 10s netperf -t DG_STREAM -T 0,2 -- -m 16068 -s 200000 ->3901747 Messages / 10s Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2012 14 次提交
-
-
由 Ben Greear 提交于
The standard ways of probing a device's promiscuity (ifi_flags, for instance) does not report the actual state of the device. This patch adds dev->promiscuity to the netlink netdevice report so that users can know for certain if the device is acting PROMISC or not. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rami Rosen 提交于
The patch removes unused icmp_ioctl() method definition in include/net/icmp.h. Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eldad Zack 提交于
net/ipv6/addrconf.c:340: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:342: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:444: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:1337: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable net/ipv6/addrconf.c:1526: ERROR: "(foo*)" should be "(foo *)" net/ipv6/addrconf.c:1671: ERROR: open brace '{' following function declarations go on the next line net/ipv6/addrconf.c:1914: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2368: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2370: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2416: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2437: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:2573: ERROR: "foo * bar" should be "foo *bar" net/ipv6/addrconf.c:3797: ERROR: "foo* bar" should be "foo *bar" Signed-off-by: NEldad Zack <eldad@fogrefinery.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eldad Zack 提交于
icmp.c:501: ERROR: "(foo*)" should be "(foo *)" icmp.c:582: ERROR: "(foo*)" should be "(foo *)" icmp.c:954: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable Signed-off-by: NEldad Zack <eldad@fogrefinery.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eldad Zack 提交于
fib6_rules.c:26: ERROR: open brace '{' following struct go on the same line Signed-off-by: NEldad Zack <eldad@fogrefinery.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eldad Zack 提交于
exthdrs_core.c:113: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable exthdrs_core.c:114: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable Signed-off-by: NEldad Zack <eldad@fogrefinery.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eldad Zack 提交于
exthdrs.c:726: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable exthdrs.c:741: ERROR: "(foo*)" should be "(foo *)" exthdrs.c:741: ERROR: "(foo*)" should be "(foo *)" exthdrs.c:744: ERROR: "(foo**)" should be "(foo **)" exthdrs.c:746: ERROR: "(foo**)" should be "(foo **)" exthdrs.c:748: ERROR: "(foo**)" should be "(foo **)" exthdrs.c:750: ERROR: "(foo**)" should be "(foo **)" exthdrs.c:755: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable exthdrs.c:896: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable Signed-off-by: NEldad Zack <eldad@fogrefinery.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eldad Zack 提交于
datagram.c:101: ERROR: "(foo*)" should be "(foo *)" datagram.c:521: ERROR: space required before the open parenthesis '(' datagram.c:830: WARNING: braces {} are not necessary for single statement blocks datagram.c:849: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: NEldad Zack <eldad@fogrefinery.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eldad Zack 提交于
addrconf_core.c:13: ERROR: space required before the open parenthesis '(' Signed-off-by: NEldad Zack <eldad@fogrefinery.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eldad Zack 提交于
sit.c:118: ERROR: "foo * bar" should be "foo *bar" sit.c:694: ERROR: "(foo*)" should be "(foo *)" sit.c:724: ERROR: "(foo*)" should be "(foo *)" Signed-off-by: NEldad Zack <eldad@fogrefinery.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
They were error prone due to an embedded goto, and the entire tree has been converted away from using them. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-