- 05 12月, 2008 40 次提交
-
-
由 Tomas Winkler 提交于
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Colin McCabe 提交于
This patch kills ath9k's ath9k_opmode enum by replacing it with nl80211_iftype. Signed-off-by: NColin McCabe <colin@cozybit.com> Signed-off-by: NAndrey Yurovsky <andrey@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
iwlwifi does not support AP mode in any way. For one, it doesn't even buffer multicast/broadcast frames properly. We didn't allow zd1211rw AP mode to be enabled without this, so iwlwifi shouldn't be allowed to advertise AP mode either. It also doesn't work at all, it doesn't even answer to probe requests, I'm guessing the packet injection code was disabled again. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This fixes the checksum calculation for lm87 firmwares on big endian platforms, the device treats the data as an array of 32-bit little endian values so the driver needs to do that as well. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This "fixes" the 11d oops I was seeing. This needs some more work but I cannot work on it now. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
3945 hardware does not emit the interrupts CSR_INT_BIT_RF_KILL (rfkill toggled) and CSR_INT_BIT_CT_KILL (adapter too hot). Hence this part of code can be removed since iwl3945_irq_tasklet does not handle 4965 hw at all. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rami Rosen 提交于
This patch removes unnecessary parameter in ieee80211_beacon_add_tim() and removes unneeded definition and assignment for bdev (instance of net_device) in ieee80211_beacon_get() and in ieee80211_get_buffered_bc() (all in tx.c). Signed-off-by: NRami Rosen <ramirose@gmail.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Fixes the segfault I just pointed out. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kalle Valo 提交于
Fixes htmldocs warning: Warning(mac80211.h:379): No description found for parameter 'pad[2]' Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch replaces the static "p54:" strings in front of most printk's with their corresponding per-device names. It was always a bit of a hassle to check which device was generating all the messages. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Thanks to the introduction of "changed" flags, we no longer have to do the bookkeeping of p54's firmware state for everything. Thus we can cut down redundancy code. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Those firmwares are probably capable of reprogramming the device's eeprom. We better support them officially, before all the accidents happen. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch allows p54 to utilize its WEP, TKIP and CCMP accelerator. Tested-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch addresses the problem in: http://marc.info/?l=linux-wireless&m=122727674810057&w=2 Thanks to Stefan Steuerwald <salsasepp@googlemail.com> extensive iPod touch tests. We could finally squash some bugs in p54's master mode / access point implementation. Let's hope we got everything right this time and all stations from now on will wake up on TIM and receive their queued frames and go to sleep again without any hiccups. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch is necessary in order to provide a proper Access point support for p54. Unfortunately for us, there is no documented way to disable the interfering power save buffering mechanism in firmware completely. Therefore we give in and notify the driver through our new sta_notify_ps callback, so that we can update the filter state. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Debugfs file location: ath9k/<wiphy>/dma Contains values in DMA debug registers. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Make debugging configurable, and add a module parameter to give the debug mask. Add debug.c to hold all debug specific code. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Remove all the useless __func__ prefixes in debug messages, and replace the DPRINTF macro with a function. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 herton 提交于
I mistakenly changed retry count passed in rtl8187_tx in previous change "rtl8187: feedback transmitted packets using tx close descriptor for 8187B". For 8187 it should represent the number of retries (retry count limit). As explained by Johannes Berg, .count represents the number of tries (not retries), and retries = tries - 1. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Tested-by: NHin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
No need to pad the header so no constant needed for that, no need to carry any version number from netbsd nor CVS IDs from them. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Hostapd now passes the HT parameters through the config() callback, use these to set the appropriate channel in AP mode. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Fabio Rossi 提交于
Some access points (e.g. Sitecom WL-174) use an empty string as hidden SSID. Signed-off-by: NFabio Rossi <rossi.f@inwind.it> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
further reducing wext code in mac80211. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch moves the SIOCGIWNAME handling from mac80211 to cfg80211. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
For mac revisions >= "Griffin," the hardware allows the mic tx and rx authenticator keys to share the same cache line, whereas earlier hardware can only store the rx. Enable the combined mic on hardware that supports it. Changes to ath5k.h Changes-licensed-under: 3-Clause-BSD Changes to attach.c, pcu.c, reg.h Changes-licensed-under: ISC Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
Status: O With the addition of TKIP (and soon CCMP), key->alg is a more useful guide to key type than the key length. This patch cleans up key type assignment in ath5k_hw_set_key by extracting it into its own function. It also replaces the separate memcpy() calls for extracting key material into the hardware format with a loop that works regardless of key size. Finally, the patch removes support for WEP-128 since it is a non-standard key length that mac80211 also doesn't use. Changes-licensed-under: ISC Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
In some cases we would like to set the mac address without changing the operating mode. However, Atheros cards store PCU data in the high 16 bits of the mac address register. Change ath5k_hw_set_lladdr() to not clobber the PCU settings. Changes-licensed-under: ISC Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
The base versions handle constant folding just fine. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We have a few BSD/ISC licensed userspace applications which include nl80211.h from the kernel. To avoid legal ambiguity for usage of the header file in these projects we rather simply relicense the header file under the ISC. We've received consent from all contributors to it. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NMichael Wu <flamingice@sourmilk.net> Acked-by: NLuis Carlos Cobo <luisca@cozybit.com> Acked-by: NMichael Buesch <mb@bu3sch.de> Acked-by: NJouni Malinen <jouni.malinen@atheros.com> Acked-by: NColin McCabe <colin@cozybit.com> Acked-by: NJavier Cardona <javier@cozybit.com> Cc: johannes@sipsolutions.net Cc: altape@eden.rutgers.edu Cc: luisca@cozybit.com Cc: mb@bu3sch.de Cc: jouni.malinen@atheros.com Cc: colin@cozybit.com Cc: javier@cozybit.com Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
This patch adds new NL80211_CMD_SET_WIPHY attributes NL80211_ATTR_WIPHY_FREQ and NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET to allow userspace to set the operating channel (e.g., hostapd for AP mode). Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When a station goes to PS mode to scan, it will then send probe requests without the PS bit set. mac80211 will take that as indication that the station woke up, but it didn't. This patch changes mac80211 to only consider doze->wake transitions on data frames to to fix that issue. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Jouni Malinen <j@w1.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch reorders calls during disassociation in ieee80211_set_disassoc function. Since sta_info_unlink calls sta_notify(REMOVE) it will remove the station representing AP from the driver before it has disassociated from it using bss_info_changed callback. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
It seems like proper etiquette to let other stations know when we are going down in either STA or IBSS mode. This also notifies userland, so wpa_supplicant doesn't get confused. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
This is fallout from moving the crypto stuff to the new lib80211 component. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Martin Willi 提交于
From: Martin Willi <martin@strongswan.org> An IPsec node speaking IKEv2 MUST accept incoming UDP encapsulated ESP packets, even if no NAT situation is detected. This is important if MOBIKE is in use. Some implementation keep the encapsulation mode if they move out of a NAT situation. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Simply replace netdev->priv with netdev_priv(). [ Kill unnecessary casts, noticed by Ilpo -DaveM ] Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Simply replace netdev->priv with netdev_priv(). Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-