- 25 10月, 2013 1 次提交
-
-
由 Stefano Stabellini 提交于
Introduce xen_dma_map_page, xen_dma_unmap_page, xen_dma_sync_single_for_cpu and xen_dma_sync_single_for_device. They have empty implementations on x86 and ia64 but they call the corresponding platform dma_ops function on arm and arm64. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Changes in v9: - xen_dma_map_page return void, avoid page_to_phys.
-
- 10 10月, 2013 2 次提交
-
-
由 Stefano Stabellini 提交于
Use xen_alloc_coherent_pages and xen_free_coherent_pages to allocate or free coherent pages. We need to be careful handling the pointer returned by xen_alloc_coherent_pages, because on ARM the pointer is not equal to phys_to_virt(*dma_handle). In fact virt_to_phys only works for kernel direct mapped RAM memory. In ARM case the pointer could be an ioremap address, therefore passing it to virt_to_phys would give you another physical address that doesn't correspond to it. Make xen_create_contiguous_region take a phys_addr_t as start parameter to avoid the virt_to_phys calls which would be incorrect. Changes in v6: - remove extra spaces. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Stefano Stabellini 提交于
xen_swiotlb_alloc_coherent needs to allocate a coherent buffer for cpu and devices. On native x86 is sufficient to call __get_free_pages in order to get a coherent buffer, while on ARM (and potentially ARM64) we need to call the native dma_ops->alloc implementation. Introduce xen_alloc_coherent_pages to abstract the arch specific buffer allocation. Similarly introduce xen_free_coherent_pages to free a coherent buffer: on x86 is simply a call to free_pages while on ARM and ARM64 is arm_dma_ops.free. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Changes in v7: - rename __get_dma_ops to __generic_dma_ops; - call __generic_dma_ops(hwdev)->alloc/free on arm64 too. Changes in v6: - call __get_dma_ops to get the native dma_ops pointer on arm.
-
- 19 10月, 2013 2 次提交
-
-
由 Stefano Stabellini 提交于
We can't simply override arm_dma_ops with xen_dma_ops because devices are allowed to have their own dma_ops and they take precedence over arm_dma_ops. When running on Xen as initial domain, we always want xen_dma_ops to be the one in use. We introduce __generic_dma_ops to allow xen_dma_ops functions to call back to the native implementation. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> CC: will.deacon@arm.com Changes in v7: - return xen_dma_ops only if we are the initial domain; - rename __get_dma_ops to __generic_dma_ops.
-
由 Stefano Stabellini 提交于
We can't simply override arm_dma_ops with xen_dma_ops because devices are allowed to have their own dma_ops and they take precedence over arm_dma_ops. When running on Xen as initial domain, we always want xen_dma_ops to be the one in use. We introduce __generic_dma_ops to allow xen_dma_ops functions to call back to the native implementation. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Suggested-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> CC: will.deacon@arm.com CC: linux@arm.linux.org.uk Changes in v7: - return xen_dma_ops only if we are the initial domain; - rename __get_dma_ops to __generic_dma_ops.
-
- 10 10月, 2013 4 次提交
-
-
由 Stefano Stabellini 提交于
Implement xen_swiotlb_set_dma_mask, use it for set_dma_mask on arm. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
-
由 Stefano Stabellini 提交于
Xen on arm and arm64 needs SWIOTLB_XEN: when running on Xen we need to program the hardware with mfns rather than pfns for dma addresses. Remove SWIOTLB_XEN dependency on X86 and PCI and make XEN select SWIOTLB_XEN on arm and arm64. At the moment always rely on swiotlb-xen, but when Xen starts supporting hardware IOMMUs we'll be able to avoid it conditionally on the presence of an IOMMU on the platform. Implement xen_create_contiguous_region on arm and arm64: for the moment we assume that dom0 has been mapped 1:1 (physical addresses == machine addresses) therefore we don't need to call XENMEM_exchange. Simply return the physical address as dma address. Initialize the xen-swiotlb from xen_early_init (before the native dma_ops are initialized), set xen_dma_ops to &xen_swiotlb_dma_ops. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Changes in v8: - assume dom0 is mapped 1:1, no need to call XENMEM_exchange. Changes in v7: - call __set_phys_to_machine_multi from xen_create_contiguous_region and xen_destroy_contiguous_region to update the P2M; - don't call XENMEM_unpin, it has been removed; - call XENMEM_exchange instead of XENMEM_exchange_and_pin; - set nr_exchanged to 0 before calling the hypercall. Changes in v6: - introduce and export xen_dma_ops; - call xen_mm_init from as arch_initcall. Changes in v4: - remove redefinition of DMA_ERROR_CODE; - update the code to use XENMEM_exchange_and_pin and XENMEM_unpin; - add a note about hardware IOMMU in the commit message. Changes in v3: - code style changes; - warn on XENMEM_put_dma_buf failures.
-
由 Stefano Stabellini 提交于
Modify xen_create_contiguous_region to return the dma address of the newly contiguous buffer. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Changes in v4: - use virt_to_machine instead of virt_to_bus.
-
由 Stefano Stabellini 提交于
Allow __set_phys_to_machine to be called for autotranslate guests. It can be used to keep track of phys_to_machine changes, however we don't do anything with the information at the moment. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
-
- 18 10月, 2013 1 次提交
-
-
由 Stefano Stabellini 提交于
Introduce physical to machine and machine to physical tracking mechanisms based on rbtrees for arm/xen and arm64/xen. We need it because any guests on ARM are an autotranslate guests, therefore a physical address is potentially different from a machine address. When programming a device to do DMA, we need to be extra-careful to use machine addresses rather than physical addresses to program the device. Therefore we need to know the physical to machine mappings. For the moment we assume that dom0 starts with a 1:1 physical to machine mapping, in other words physical addresses correspond to machine addresses. However when mapping a foreign grant reference, obviously the 1:1 model doesn't work anymore. So at the very least we need to be able to track grant mappings. We need locking to protect accesses to the two trees. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Changes in v8: - move pfn_to_mfn and mfn_to_pfn to page.h as static inline functions; - no need to walk the tree if phys_to_mach.rb_node is NULL; - correctly handle multipage p2m entries; - substitute the spin_lock with a rwlock.
-
- 15 10月, 2013 2 次提交
-
-
由 Stefano Stabellini 提交于
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> CC: will.deacon@arm.com Changes in v8: - cast to dma_addr_t before returning.
-
由 Stefano Stabellini 提交于
IOMMU_HELPER is needed because SWIOTLB calls iommu_is_span_boundary, provided by lib/iommu_helper.c. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: will.deacon@arm.com CC: linux@arm.linux.org.uk Changes in v8: - use __phys_to_pfn and __pfn_to_phys. Changes in v7: - dma_mark_clean: empty implementation; - in dma_capable use coherent_dma_mask if dma_mask hasn't been allocated. Changes in v6: - check for dev->dma_mask being NULL in dma_capable. Changes in v5: - implement dma_mark_clean using dmac_flush_range. Changes in v3: - dma_capable: do not treat dma_mask as a limit; - remove SWIOTLB dependency on NEED_SG_DMA_LENGTH.
-
- 14 10月, 2013 10 次提交
-
-
由 Linus Torvalds 提交于
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog fixes from Wim Van Sebroeck: "This will fix a deadlock on the ts72xx_wdt driver, fix bitmasks in the kempld_wdt driver and fix a section mismatch in the sunxi_wdt driver" * git://www.linux-watchdog.org/linux-watchdog: watchdog: sunxi: Fix section mismatch watchdog: kempld_wdt: Fix bit mask definition watchdog: ts72xx_wdt: locking bug in ioctl
-
由 Maxime Ripard 提交于
This driver has a section mismatch, for probe and remove functions, leading to the following warning during the compilation. WARNING: drivers/watchdog/built-in.o(.data+0x24): Section mismatch in reference from the variable sunxi_wdt_driver to the function .init.text:sunxi_wdt_probe() The variable sunxi_wdt_driver references the function __init sunxi_wdt_probe() Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
STAGE_CFG bits are defined as [5:4] bits. However, '(((x) & 0x30) << 4)' handles [9:8] bits. Thus, it should be fixed in order to handle [5:4] bits. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Dan Carpenter 提交于
Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a interruptible deadlock. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "A small batch of fixes this week, mostly OMAP related. Nothing stands out as particularly controversial. Also a fix for a 3.12-rc1 timer regression for Exynos platforms, including the Chromebooks" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: dts: Update 5250 arch timer node with clock frequency ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
-
由 Yuvaraj Kumar C D 提交于
Without the "clock-frequency" property in arch timer node, could able to see the below crash dump. [<c0014e28>] (unwind_backtrace+0x0/0xf4) from [<c0011808>] (show_stack+0x10/0x14) [<c0011808>] (show_stack+0x10/0x14) from [<c036ac1c>] (dump_stack+0x7c/0xb0) [<c036ac1c>] (dump_stack+0x7c/0xb0) from [<c01ab760>] (Ldiv0_64+0x8/0x18) [<c01ab760>] (Ldiv0_64+0x8/0x18) from [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) from [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) from [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) from [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) from [<c04b40d8>] (clocksource_of_init+0x34/0x58) [<c04b40d8>] (clocksource_of_init+0x34/0x58) from [<c049ed8c>] (time_init+0x20/0x2c) [<c049ed8c>] (time_init+0x20/0x2c) from [<c049b95c>] (start_kernel+0x1e0/0x39c) THis is because the Exynos u-boot, for example on the Chromebooks, doesn't set up the CNTFRQ register as expected by arch_timer. Instead, we have to specify the frequency in the device tree like this. Signed-off-by: NYuvaraj Kumar C D <yuvaraj.cd@samsung.com> [olof: Changed subject, added comment, elaborated on commit message] Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few fixes for omap3 related hangs and errors that people have noticed now that people are actually using the device tree based booting for omap3. Also one regression fix for timer compile for dra7xx when omap5 is not selected, and a LED regression fix for n900. * tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: "This patchset includes a bugfix to prevent a kernel crash when memory in page zero is accessed by the kernel itself, e.g. via probe_kernel_read(). Furthermore we now export flush_cache_page() which is needed (indirectly) by the lustre filesystem. The other patches remove unused functions and optimizes the page fault handler to only evaluate variables if needed, which again protects against possible kernel crashes" * 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: let probe_kernel_read() capture access to page zero parisc: optimize variable initialization in do_page_fault parisc: fix interruption handler to respect pagefault_disable() parisc: mark parisc_terminate() noreturn and cold. parisc: remove unused syscall_ipi() function. parisc: kill SMP single function call interrupt parisc: Export flush_cache_page() (needed by lustre)
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes from Vinod Koul: "Another week, time to send another fixes request taking time out of extended weekend for the festivities in this part of the world. We have two fixes from Sergei for rcar driver and one fixing memory leak of edma driver by Geyslan" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: edma.c: remove edma_desc leakage rcar-hpbdma: add parameter to set_slave() method rcar-hpbdma: remove shdma_free_irq() calls
-
- 13 10月, 2013 16 次提交
-
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 John David Anglin 提交于
The attached change defers the initialization of the variables tsk, mm and flags until they are needed. As a result, the code won't crash if a kernel probe is done with a corrupt context and the code will be better optimized. Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Running an "echo t > /proc/sysrq-trigger" crashes the parisc kernel. The problem is, that in print_worker_info() we try to read the workqueue info via the probe_kernel_read() functions which use pagefault_disable() to avoid crashes like this: probe_kernel_read(&pwq, &worker->current_pwq, sizeof(pwq)); probe_kernel_read(&wq, &pwq->wq, sizeof(wq)); probe_kernel_read(name, wq->name, sizeof(name) - 1); The problem here is, that the first probe_kernel_read(&pwq) might return zero in pwq and as such the following probe_kernel_reads() try to access contents of the page zero which is read protected and generate a kernel segfault. With this patch we fix the interruption handler to call parisc_terminate() directly only if pagefault_disable() was not called (in which case preempt_count()==0). Otherwise we hand over to the pagefault handler which will try to look up the faulting address in the fixup tables. Signed-off-by: NHelge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Jiang Liu 提交于
Commit 9a46ad6d "smp: make smp_call_function_many() use logic similar to smp_call_function_single()" has unified the way to handle single and multiple cross-CPU function calls. Now only one interrupt is needed for architecture specific code to support generic SMP function call interfaces, so kill the redundant single function call interrupt. Signed-off-by: NJiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Geert Uytterhoeven 提交于
ERROR: "flush_cache_page" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined! Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Linus Torvalds 提交于
Olga reported that file descriptors opened with O_PATH do not work with fstatfs(), found during further development of ksh93's thread support. There is no reason to not allow O_PATH file descriptors here (fstatfs is very much a path operation), so use "fdget_raw()". See commit 55815f70 ("vfs: make O_PATH file descriptors usable for 'fstat()'") for a very similar issue reported for fstat() by the same team. Reported-and-tested-by: Nольга крыжановская <olga.kryzhanovska@gmail.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org # O_PATH introduced in 3.0+ Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 bugfixes from Ted Ts'o: "A bug fix and performance regression fix for ext4" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix memory leak in xattr ext4: fix performance regression in writeback of random writes
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "We've got more bug fixes in my for-linus branch: One of these fixes another corner of the compression oops from last time. Miao nailed down some problems with concurrent snapshot deletion and drive balancing. I kept out one of his patches for more testing, but these are all stable" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix oops caused by the space balance and dead roots Btrfs: insert orphan roots into fs radix tree Btrfs: limit delalloc pages outside of find_delalloc_range Btrfs: use right root when checking for hash collision
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "All stable fixes except for a trivial headset mic fixup: the removal of bogus frame checks in snd-usb-usx2y driver that have regressed in the recent kernel versions, the HD-audio HDMI channel map fix, and a few HD-audio device-specific fixes" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Sony VAIO Pro 13 (haswell) now has a working headset jack ALSA: hda - Add a headset mic model for ALC269 and friends ALSA: hda - Fix microphone for Sony VAIO Pro 13 (Haswell model) ALSA: hda - Add fixup for ASUS N56VZ ALSA: hda - hdmi: Fix channel map switch not taking effect ALSA: hda - Fix mono speakers and headset mic on Dell Vostro 5470 ALSA: snd-usb-usx2y: remove bogus frame checks
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "We had various reports of problems with deferred probing in the I2C subsystem, so this pull requst is a little bigger than usual. Most issues should be addressed now so devices will be found correctly. A few ususal driver bugfixes are in here, too" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-mux-pinctrl: use deferred probe when adapter not found i2c: i2c-arb-gpio-challenge: use deferred probe when adapter not found i2c: i2c-mux-gpio: use deferred probing i2c: i2c-mux-gpio: don't ignore of_get_named_gpio errors i2c: omap: Clear ARDY bit twice i2c: Not all adapters have a parent i2c: i2c-stu300: replace platform_driver_probe to support deferred probing i2c: i2c-mxs: replace platform_driver_probe to support deferred probing i2c: i2c-imx: replace platform_driver_probe to support deferred probing i2c: i2c-designware-platdrv: replace platform_driver_probe to support deferred probing
-
由 Dave Jones 提交于
If we take the 2nd retry path in ext4_expand_extra_isize_ea, we potentionally return from the function without having freed these allocations. If we don't do the return, we over-write the previous allocation pointers, so we leak either way. Spotted with Coverity. [ Fixed by tytso to set is and bs to NULL after freeing these pointers, in case in the retry loop we later end up triggering an error causing a jump to cleanup, at which point we could have a double free bug. -- Ted ] Signed-off-by: NDave Jones <davej@fedoraproject.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NEric Sandeen <sandeen@redhat.com> Cc: stable@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull gcc "asm goto" miscompilation workaround from Ingo Molnar: "This is the fix for the GCC miscompilation discussed in the following lkml thread: [x86] BUG: unable to handle kernel paging request at 00740060 The bug in GCC has been fixed by Jakub and the fix will be part of the GCC 4.8.2 release expected to be released next week - so the quirk's version test checks for <= 4.8.1. The quirk is only added to compiler-gcc4.h and not to the higher level compiler.h because all asm goto uses are behind a feature check" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compiler/gcc4: Add quirk for 'asm goto' miscompilation bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "A build fix and a reboot quirk" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/reboot: Add reboot quirk for Dell Latitude E5410 x86, build, pci: Fix PCI_MSI build on !SMP
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC fix from Vineet Gupta: "Fix for broken gdb 'jump'" * tag 'arc-fixes-for-3.12-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Ignore ptrace SETREGSET request for synthetic register "stop_pc"
-
- 12 10月, 2013 2 次提交
-
-
由 Vineet Gupta 提交于
ARCompact TRAP_S insn used for breakpoints, commits before exception is taken (updating architectural PC). So ptregs->ret contains next-PC and not the breakpoint PC itself. This is different from other restartable exceptions such as TLB Miss where ptregs->ret has exact faulting PC. gdb needs to know exact-PC hence ARC ptrace GETREGSET provides for @stop_pc which returns ptregs->ret vs. EFA depending on the situation. However, writing stop_pc (SETREGSET request), which updates ptregs->ret doesn't makes sense stop_pc doesn't always correspond to that reg as described above. This was not an issue so far since user_regs->ret / user_regs->stop_pc had same value and both writing to ptregs->ret was OK, needless, but NOT broken, hence not observed. With gdb "jump", they diverge, and user_regs->ret updating ptregs is overwritten immediately with stop_pc, which this patch fixes. Reported-by: NAnton Kolesov <akolesov@synopsys.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fix from Ralf Baechle: "Just one fix. The stack protector was loading the value of the canary instead of its address" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: stack protector: Fix per-task canary switch
-