- 10 3月, 2006 13 次提交
-
-
由 Stephen Hemminger 提交于
Turn on truncation to prevent getting choked by frames larger than expected. Without this fix, driver hangs after receiving an oversize packet. Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Stephen Hemminger 提交于
Avoid premature transmit ring full conditions. Force a transmit status interrupt if transmit ring gets nearly full and after a TSO send. Allow more entries in transmit ring to be used if dma_addr is 32 bits Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Stephen Hemminger 提交于
Don't use sky2 to seed random pool beacause the network packet arrival time will not be truly random due to NAPI and interrupt mitigation. Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Francois Romieu 提交于
Insert de_init_rings() to reinit the rings before de_init_hw() tries to access them again. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
由 Francois Romieu 提交于
de_init_hw enables the irq thus it must be issued after request_irq. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
由 Ralf Baechle 提交于
Some people still haven't heared that fp in the kernel is forbidden. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This is gluing the build of cirrusfb but really the mess that would need cleaning and fixing is <video/vga.h> and <linux/vt_buffer.h> ... Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Found by make buildcheck. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
At times gcc will place bits of __exit functions into .rodata. If compiled into the kernle itself we used to discard .exit.text - but not the bits left in .rodata. While harmless this did at times result in a large number of warnings. So until gcc fixes this, discard .exit.text at runtime. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
In case a particular system doesn't support highmem the runtime checks will ensure nothing bad is going to happen. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
What: Support for NEC DDB5074 and DDB5476 evaluation boards. When: June 2006 Why: Board specific code doesn't build anymore since ~2.6.0 and no users have complained indicating there is no more need for these boards. This should really be considered a last call. Who: Ralf Baechle <ralf@linux-mips.org>
-
- 09 3月, 2006 27 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge: powerpc: Fix various syscall/signal/swapcontext bugs [PATCH] powerpc: incorrect rmo_top handling in prom_init [PATCH] powerpc: Fix incorrect pud_ERROR() message [PATCH] powerpc: Expose SMT and L1 icache snoop userland features [PATCH] powerpc: Fix windfarm_pm112 not starting all control loops [PATCH] powerpc: Fix old g5 issues with windfarm powerpc32: Fix timebase synchronization on 32-bit powermacs powerpc: Turn off verbose debug output in powermac platform functions powerpc: Fix might-sleep warning in program check exception handler
-
由 Andi Kleen 提交于
The low level PCI DMA mapping functions should handle it in most cases. This should fix problems with depleting the DMA zone early. The old code used precious GFP_DMA memory in many cases where it was not needed. Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
ATI chipsets tend to generate double timer interrupts for the local APIC timer when both the 8254 and the IO-APIC timer pins are enabled. This is because they route it to both and the result is anded together and the CPU ends up processing it twice. This patch changes check_timer to disable the 8254 routing for interrupt 0. I think it would be safe on all chipsets actually (i tested it on a couple and it worked everywhere) and Windows seems to do it in a similar way, but to be conservative this patch only enables this mode on ATI (and adds options to enable/disable too) Ported over from a similar x86-64 change. I reused the ACPI earlyquirk infrastructure for the ATI bridge check, but tweaked it a bit to work even without ACPI. Inspired by a patch from Chuck Ebbert, but redone. Cc: Chuck Ebbert <76306.1226@compuserve.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET] compat ifconf: fix limits
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: Merge branch 'work-fixes' V4L/DVB (3413): Typos grab bag of the month V4L/DVB (3403): Workaround to fix initialization for Nexus CA Merge branch 'work-fixes' V4L/DVB (3395): Fixed Pinnacle 300i DVB-T support V4L/DVB (3399): ELSA EX-VISION 500TV: fix incorrect PCI subsystem ID V4L/DVB (3382): Fix stv0297 for qam128 on tt c1500 (saa7146) V4L/DVB (3300a): Removing personal email from DVB maintainers V4L/DVB (3385): Dvb: fix __init/__exit section references in av7110 driver V4L/DVB (3378): Restore power on defaults of tda9887 after tda8290 probe V4L/DVB (3354): Fix maximum for the saturation and contrast controls. V4L/DVB (3352): Cxusb: fix lgdt3303 naming V4L/DVB (3348): Fixed saa7134 ALSA initialization with multiple cards V4L/DVB (3347): Pinnacle PCTV 40i: add filtered Composite2 input V4L/DVB (3341): Upstream sync - make 2 structs static V4L/DVB (3340): Make a struct static V4L/DVB (3337): Drivers/media/dvb/frontends/mt312.c: cleanups V4L/DVB (3336): Bt8xx documentation authors fix
-
由 Randy Dunlap 提交于
A recent change to compat. dev_ifconf() in fs/compat_ioctl.c causes ifconf data to be truncated 1 entry too early when copying it to userspace. The correct amount of data (length) is returned, but the final entry is empty (zero, not filled in). The for-loop 'i' check should use <= to allow the final struct ifreq32 to be copied. I also used the ifconf-corruption program in kernel bugzilla #4746 to make sure that this change does not re-introduce the corruption. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Matz 提交于
While testing kexec and kdump we hit problems where the new kernel would freeze or instantly reboot. The easiest way to trigger it was to kexec a kernel compiled for CONFIG_M586 on an athlon cpu. Compiling for CONFIG_MK7 instead would work fine. The patch fixes a few problems with the kexec inline asm. Signed-off-by: NChris Mason <mason@suse.com> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matt Mackall 提交于
Signed-off-by: NMatt Mackall <mpm@selenic.com> Tested-by: NAnders K. Pedersen <akp@cohaesio.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jack Steiner 提交于
kmem_cache_init() incorrectly assumes that the cache_cache object will fit in an order 0 allocation. On very large systems, this is not true. Change the code to try larger order allocations if order 0 fails. Signed-off-by: NJack Steiner <steiner@sgi.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Latchesar Ionkov 提交于
Miscellaneous fixes related to accessing uninitialized variables or memory that was already freed. Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shaohua Li 提交于
The x86_model calculation also applies for family 6. early_cpu_detect does the right thing, but generic_identify misses. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: "Seth, Rohit" <rohit.seth@intel.com> Acked-by: NAndi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Horst Hummel 提交于
DASD allows to open a device as soon as gendisk is registered, which means the device is a fake device (capacity=0) and we do know nothing about blocksize and partitions at that point of time. In case the device is opened by someone, the bdev and inode creation is done with the fake device info and the following partition detection code is just using the wrong data. To avoid this modify the DASD state machine to make sure that the open is rejected until the device analysis is either finished or an unformatted device was detected. Signed-off-by: NHorst Hummel <horst.hummel@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schwidefsky 提交于
The message limit on the iucv connect call for the smsg module is too low. Therefore increase the smsg message limit to 255. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Gerald Schaefer 提交于
strnlen_user is supposed to return then length count + 1 if no terminating \0 is found, and it should return 0 on exception. Found by David Howells <dhowells@redhat.com>. Signed-off-by: NGerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-By: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Woodhouse 提交于
Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dipankar Sarma 提交于
I have benchmarked this on an x86_64 NUMA system and see no significant performance difference on kernbench. Tested on both x86_64 and powerpc. The way we do file struct accounting is not very suitable for batched freeing. For scalability reasons, file accounting was constructor/destructor based. This meant that nr_files was decremented only when the object was removed from the slab cache. This is susceptible to slab fragmentation. With RCU based file structure, consequent batched freeing and a test program like Serge's, we just speed this up and end up with a very fragmented slab - llm22:~ # cat /proc/sys/fs/file-nr 587730 0 758844 At the same time, I see only a 2000+ objects in filp cache. The following patch I fixes this problem. This patch changes the file counting by removing the filp_count_lock. Instead we use a separate percpu counter, nr_files, for now and all accesses to it are through get_nr_files() api. In the sysctl handler for nr_files, we populate files_stat.nr_files before returning to user. Counting files as an when they are created and destroyed (as opposed to inside slab) allows us to correctly count open files with RCU. Signed-off-by: NDipankar Sarma <dipankar@in.ibm.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dipankar Sarma 提交于
This patch adds new tunables for RCU queue and finished batches. There are two types of controls - number of completed RCU updates invoked in a batch (blimit) and monitoring for high rate of incoming RCUs on a cpu (qhimark, qlowmark). By default, the per-cpu batch limit is set to a small value. If the input RCU rate exceeds the high watermark, we do two things - force quiescent state on all cpus and set the batch limit of the CPU to INTMAX. Setting batch limit to INTMAX forces all finished RCUs to be processed in one shot. If we have more than INTMAX RCUs queued up, then we have bigger problems anyway. Once the incoming queued RCUs fall below the low watermark, the batch limit is set to the default. Signed-off-by: NDipankar Sarma <dipankar@in.ibm.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Implement percpu_counter_sum(). This is a more accurate but slower version of percpu_counter_read_positive(). We need this for Alex's speedup-ext3_statfs patch and for the nr_file accounting fix. Otherwise these things would be too inaccurate on large CPU counts. Cc: Ravikiran G Thirumalai <kiran@scalex86.org> Cc: Alex Tomas <alex@clusterfs.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 GOTO Masanori 提交于
Fix i386 nmi_watchdog that does not meet watchdog timeout condition. It does not hit die_nmi when it should be triggered, because the current nmi_watchdog_tick in arch/i386/kernel/nmi.c never count up alert_counter like this: void nmi_watchdog_tick (struct pt_regs * regs) { if (last_irq_sums[cpu] == sum) { alert_counter[cpu]++; <- count up alert_counter, but if (alert_counter[cpu] == 5*nmi_hz) die_nmi(regs, "NMI Watchdog detected LOCKUP"); alert_counter[cpu] = 0; <- reset alert_counter This patch changes it back to the previous and working version. This was found and originally written by Kohta NAKASHIMA. (akpm: also uninline write_watchdog_counter(), saving 184 byets) Signed-off-by: NGOTO Masanori <gotom@sanori.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Atsushi Nemoto 提交于
If the 'ptr' is a const, this code cause "assignment of read-only variable" error on gcc 4.x. Use __u64 instead of __typeof__(*(ptr)) for temporary variable to get rid of errors on gcc 4.x. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Idle threads should have a sane ->timestamp value, to avoid init kernel thread(s) from inheriting it and causing miscalculations in try_to_wake_up(). Reported-by: Mike Galbraith <efault@gmx.de>. Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Phillip Susi 提交于
Fix a bug in udf where it would write uid/gid = 0 to the disk for files owned by the id given with the uid=/gid= mount options. It also adds 4 new mount options: uid/gid=forget and uid/gid=ignore. Without any options the id in core and on disk always match. Giving uid/gid=nnn specifies a default ID to be used in core when the on disk ID is -1. uid/gid=ignore forces the in core ID to allways be used no matter what the on disk ID is. uid/gid=forget forces the on disk ID to always be written out as -1. The use of these options allows you to override ownerships on a disk or disable ownwership information from being written, allowing the media to be used portably between different computers and possibly different users without permissions issues that would require root to correct. Signed-off-by: NPhillip Susi <psusi@cfl.rr.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Fix the mm/mempolicy.c build for !CONFIG_HUGETLB_PAGE. Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Martin Bligh <mbligh@google.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
We're presently getting oopses because Bluetooth (and possibly other) drivers are calling core functions after things have been shut down. So rather than oopsing, let's drop a warning then take avoiding action, so the machine survives. Once all the sub-drivers are fixed up we can remove the take-avoiding-action part. Signed-off-by: NPavel Machek <pavel@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mark Fasheh 提交于
We fixed this: arch/powerpc/platforms/pseries/eeh.c: In function `eeh_add_device_tree_late': arch/powerpc/platforms/pseries/eeh.c:901: warning: implicit declaration of function `eeh_add_device_late' arch/powerpc/platforms/pseries/eeh.c: At top level: arch/powerpc/platforms/pseries/eeh.c:918: error: conflicting types for 'eeh_add_device_late' arch/powerpc/platforms/pseries/eeh.c:901: error: previous implicit declaration of 'eeh_add_device_late' was here make[2]: *** [arch/powerpc/platforms/pseries/eeh.o] Error 1 But we forgot the !CONFIG_EEH stub. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
They aren't used (nor even really usable) outside of pipe.c anyway Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] mca recovery return value when no bus check [IA64] SGI SN drivers: don't report !sn2 hardware as an error [IA64] don't report !sn2 or !summit hardware as an error [IA64] gensparse_defconfig: turn on PNPACPI [IA64] Increase severity of MCA recovery messages
-