We don't need to call lock_op and lock_page at the aborting path.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If there is not enough available memory, we need to trigger f2fs_sync_fs.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We don't need to force to write dirty_exceeded for f2fs_balance_fs_bg.
This flag was only meaningful to write bypassing conditions.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Fix clashing values for O_PATH and FMODE_NONOTIFY on sparc.  The
clashing O_PATH value was added in commit 5229645b ("vfs: add
nonconflicting values for O_PATH") but this can't be changed as it is
user-visible.

FMODE_NONOTIFY is only used internally in the kernel, but it is in the
same numbering space as the other O_* flags, as indicated by the comment
at the top of include/uapi/asm-generic/fcntl.h (and its use in
fs/notify/fanotify/fanotify_user.c).  So renumber it to avoid the clash.

All of this has happened before (commit 12ed2e36: "fanotify:
FMODE_NONOTIFY and __O_SYNC in sparc conflict"), and all of this will
happen again -- so update the uniqueness check in fcntl_init() to
include __FMODE_NONOTIFY.
Signed-off-by: NDavid Drysdale <drysdale@google.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NJan Kara <jack@suse.cz>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_link(), the parent directory inode passed to function
ocfs2_lookup_ino_from_name() is wrong.  Parameter dir is the parent of
new_dentry not old_dentry.  We should get old_dir from old_dentry and
lookup old_dentry in old_dir in case another node remove the old dentry.

With this change, hard linking works again, when paths are relative with
at least one subdirectory.  This is how the problem was reproducable:

  # mkdir a
  # mkdir b
  # touch a/test
  # ln a/test b/test
  ln: failed to create hard link `b/test' => `a/test': No such file or  directory

However when creating links in the same dir, it worked well.

Now the link gets created.

Fixes: 0e048316 ("ocfs2: check existence of old dentry in ocfs2_link()")
Signed-off-by: Njoyce.xue <xuejiufei@huawei.com>
Reported-by: NSzabo Aron - UBIT <aron@ubit.hu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Tested-by: NAron Szabo <aron@ubit.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In dlm_process_recovery_data, only when dlm_new_lock failed the ret will
be set to -ENOMEM.  And in this case, newlock is definitely NULL.  So
test newlock is meaningless, remove it.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: NAlex Chen <alex.chen@huawei.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJakub Wilk <jwilk@jwilk.net>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

This reverts commit 14516bb7.

This was causing regression test failures with generic/285 with an ext3
filesystem using CONFIG_EXT4_USE_FOR_EXT23.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Prevent BUG or corrupted file systems after the following:

mkfs.ext4 /dev/vdc 100M
mount -t ext4 -o sb=40961 /dev/vdc /vdc
resize2fs /dev/vdc

We previously prevented online resizing using the old resize ioctl.
Move the code to ext4_resize_begin(), so the check applies for all of
the resize ioctl's.
Reported-by: NMaxim Malkov <malkov@ispras.ru>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

In spite of different file type,
 if file is same name and same inode number, old inode cache is used.
This causes that you can not cd directory, can not cat SymbolicLink.
So this patch is that if file type is different, return error.

Reproducible sample :
1. create file 'a' at cifs client.
2. repeat rm and mkdir 'a' 4 times at server, then direcotry 'a' having same inode number is created.
   (Repeat 4 times, then same inode number is recycled.)
   (When server is under RHEL 6.6, 1 time is O.K.  Always same inode number is recycled.)
3. ls -li at client, then you can not cd directory, can not remove directory.

SymbolicLink has same problem.

Bug link:
https://bugzilla.kernel.org/show_bug.cgi?id=90011Signed-off-by: NNakajima Akira <nakajima.akira@nttcom.co.jp>
Acked-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NSteve French <steve.french@primarydata.com>

Replace repeated dereferences like dir->i_sb by storing superblock
pointer in a variable and using that.
Signed-off-by: NJan Kara <jack@suse.cz>

Check that length specified in a component of a symlink fits in the
input buffer we are reading. Also properly ignore component length for
component types that do not use it. Otherwise we read memory after end
of buffer for corrupted udf image.
Reported-by: NCarl Henrik Lunde <chlunde@ping.uio.no>
CC: stable@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>

Symlink reading code does not check whether the resulting path fits into
the page provided by the generic code. This isn't as easy as just
checking the symlink size because of various encoding conversions we
perform on path. So we have to check whether there is still enough space
in the buffer on the fly.

CC: stable@vger.kernel.org
Reported-by: NCarl Henrik Lunde <chlunde@ping.uio.no>
Signed-off-by: NJan Kara <jack@suse.cz>

UDF specification allows arbitrarily large symlinks. However we support
only symlinks at most one block large. Check the length of the symlink
so that we don't access memory beyond end of the symlink block.

CC: stable@vger.kernel.org
Reported-by: NCarl Henrik Lunde <chlunde@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Verify that inode size is sane when loading inode with data stored in
ICB. Otherwise we may get confused later when working with the inode and
inode size is too big.

CC: stable@vger.kernel.org
Reported-by: NCarl Henrik Lunde <chlunde@ping.uio.no>
Signed-off-by: NJan Kara <jack@suse.cz>

We didn't check length of rock ridge ER records before printing them.
Thus corrupted isofs image can cause us to access and print some memory
behind the buffer with obvious consequences.
Reported-and-tested-by: NCarl Henrik Lunde <chlunde@ping.uio.no>
CC: stable@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>

For buffer write, page lock will be got in write_begin and released in
write_end, in ocfs2_write_end_nolock(), before it unlock the page in
ocfs2_free_write_ctxt(), it calls ocfs2_run_deallocs(), this will ask
for the read lock of journal->j_trans_barrier.  Holding page lock and
ask for journal->j_trans_barrier breaks the locking order.

This will cause a deadlock with journal commit threads, ocfs2cmt will
get write lock of journal->j_trans_barrier first, then it wakes up
kjournald2 to do the commit work, at last it waits until done.  To
commit journal, kjournald2 needs flushing data first, it needs get the
cache page lock.

Since some ocfs2 cluster locks are holding by write process, this
deadlock may hung the whole cluster.

unlock pages before ocfs2_run_deallocs() can fix the locking order, also
put unlock before ocfs2_commit_trans() to make page lock is unlocked
before j_trans_barrier to preserve unlocking order.
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NWengang Wang <wen.gang.wang@oracle.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit ac4fef4d ("ocfs2/dlm: do not purge lockres that is queued for
assert master") may have the following possible race case:

  dlm_dispatch_assert_master       dlm_wq
  ========================================================================
  queue_work(dlm->quedlm_worker,
      &dlm->dispatched_work);
                                 dispatch work,
                                 dlm_lockres_drop_inflight_worker
                                 *BUG_ON(res->inflight_assert_workers == 0)*
  dlm_lockres_grab_inflight_worker
  inflight_assert_workers++

So ensure inflight_assert_workers to be increased first.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Signed-off-by: NXue jiufei <xuejiufei@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When running ocfs2 test suite multiple nodes reflink stress test, for a
4 nodes cluster, every unlink() for refcounted file needs about 700s.

The slow unlink is caused by the contention of refcount tree lock since
all nodes are unlink files using the same refcount tree.  When the
unlinking file have many extents(over 1600 in our test), most of the
extents has refcounted flag set.  In ocfs2_commit_truncate(), it will
execute the following call trace for every extents.  This means it needs
get and released refcount tree lock about 1600 times.  And when several
nodes are do this at the same time, the performance will be very low.

  ocfs2_remove_btree_range()
  --  ocfs2_lock_refcount_tree()
  ----  ocfs2_refcount_lock()
  ------  __ocfs2_cluster_lock()

ocfs2_refcount_lock() is costly, move it to ocfs2_commit_truncate() to
do lock/unlock once can improve a lot performance.
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Wengang <wen.gang.wang@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch include CMA info (CMATotal, CMAFree) in /proc/meminfo.
Currently, in a CMA enabled system, if somebody wants to know the total
CMA size declared, there is no way to tell, other than the dmesg or
/var/log/messages logs.

With this patch we are showing the CMA info as part of meminfo, so that it
can be determined at any point of time.  This will be populated only when
CMA is enabled.

Below is the sample output from a ARM based device with RAM:512MB and CMA:16MB.

  MemTotal:         471172 kB
  MemFree:          111712 kB
  MemAvailable:     271172 kB
  .
  .
  .
  CmaTotal:          16384 kB
  CmaFree:            6144 kB

This patch also fix below checkpatch errors that were found during these changes.

  ERROR: space required after that ',' (ctx:ExV)
  199: FILE: fs/proc/meminfo.c:199:
  +       ,atomic_long_read(&num_poisoned_pages) << (PAGE_SHIFT - 10)
          ^

  ERROR: space required after that ',' (ctx:ExV)
  202: FILE: fs/proc/meminfo.c:202:
  +       ,K(global_page_state(NR_ANON_TRANSPARENT_HUGEPAGES) *
          ^

  ERROR: space required after that ',' (ctx:ExV)
  206: FILE: fs/proc/meminfo.c:206:
  +       ,K(totalcma_pages)
          ^

  total: 3 errors, 0 warnings, 2 checks, 236 lines checked
Signed-off-by: NPintu Kumar <pintu.k@samsung.com>
Signed-off-by: NVishnu Pratap Singh <vishnu.ps@samsung.com>
Acked-by: NMichal Nazarewicz <mina86@mina86.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Longname is not correctly handled by hfsplus driver.  If an attempt to
create a longname(>255) file/directory is made, it succeeds by creating a
file/directory with HFSPLUS_MAX_STRLEN and incorrect catalog key.  Thus
leaving the volume in an inconsistent state.  This patch fixes this issue.

Although lookup is always called first to create a negative entry, so just
doing a check in lookup would probably fix this issue.  I choose to
propagate error to other iops as well.

Please NOTE: I have factored out hfsplus_cat_build_key_with_cnid from
hfsplus_cat_build_key, to avoid unncessary branching.

Thanks a lot.

  TEST:
  ------
  dir="TEST_DIR"
  cdir=`pwd`
  name255="_123456789_123456789_123456789_123456789_123456789_123456789\
  _123456789_123456789_123456789_123456789_123456789_123456789_123456789\
  _123456789_123456789_123456789_123456789_123456789_123456789_123456789\
  _123456789_123456789_123456789_123456789_123456789_1234"
  name256="${name255}5"

  mkdir $dir
  cd $dir
  touch $name255
  rm -f $name255
  touch $name256
  ls -la
  cd $cdir
  rm -rf $dir

  RESULT:
  -------
  [sougata@ultrabook tmp]$ cdir=`pwd`
  [sougata@ultrabook tmp]$
  name255="_123456789_123456789_123456789_123456789_123456789_123456789\
   > _123456789_123456789_123456789_123456789_123456789_123456789_123456789\
   > _123456789_123456789_123456789_123456789_123456789_123456789_123456789\
   > _123456789_123456789_123456789_123456789_123456789_1234"
  [sougata@ultrabook tmp]$ name256="${name255}5"
  [sougata@ultrabook tmp]$
  [sougata@ultrabook tmp]$ mkdir $dir
  [sougata@ultrabook tmp]$ cd $dir
  [sougata@ultrabook TEST_DIR]$ touch $name255
  [sougata@ultrabook TEST_DIR]$ rm -f $name255
  [sougata@ultrabook TEST_DIR]$ touch $name256
  [sougata@ultrabook TEST_DIR]$ ls -la
  ls: cannot access
  _123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_1234:
  No such file or directory
  total 0
  drwxrwxr-x 1 sougata sougata 3 Feb 20 19:56 .
  drwxrwxrwx 1 root    root    6 Feb 20 19:56 ..
  -????????? ? ?       ?       ?            ?
  _123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_1234
  [sougata@ultrabook TEST_DIR]$ cd $cdir
  [sougata@ultrabook tmp]$ rm -rf $dir
  rm: cannot remove `TEST_DIR': Directory not empty

-ENAMETOOLONG returned from hfsplus_asc2uni was not propaged to iops.
This allowed hfsplus to create files/directories with HFSPLUS_MAX_STRLEN
and incorrect keys, leaving the FS in an inconsistent state.  This patch
fixes this issue.
Signed-off-by: NSougata Santra <sougata@tuxera.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While reviewing the code of umount_tree I realized that when we append
to a preexisting unmounted list we do not change pprev of the former
first item in the list.

Which means later in namespace_unlock hlist_del_init(&mnt->mnt_hash) on
the former first item of the list will stomp unmounted.first leaving
it set to some random mount point which we are likely to free soon.

This isn't likely to hit, but if it does I don't know how anyone could
track it down.

[ This happened because we don't have all the same operations for
  hlist's as we do for normal doubly-linked lists. In particular,
  list_splice() is easy on our standard doubly-linked lists, while
  hlist_splice() doesn't exist and needs both start/end entries of the
  hlist.  And commit 38129a13 incorrectly open-coded that missing
  hlist_splice().

  We should think about making these kinds of "mindless" conversions
  easier to get right by adding the missing hlist helpers   - Linus ]

Fixes: 38129a13 switch mnt_hash to hlist
Cc: stable@vger.kernel.org
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Neither Sage nor I noticed that Zheng Yan had mistakenly committed
fs/ceph/super.h.rej as part of commit 31c542a1 ("ceph: add inline
data to pagecache").

Remove it.
Requested-by: NYan, Zheng <ukernel@gmail.com>
Cc: Sage Weil <sweil@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

make sure 'value' is not null. otherwise __ceph_setxattr will remove
the extended attribute.
Signed-off-by: NYan, Zheng <zyan@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>

mksnap reply only contain 'target', does not contain 'dentry'. So
it's wrong to use req->r_reply_info.head->is_dentry to detect traceless
reply.
Signed-off-by: NYan, Zheng <zyan@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Probably this code was syncing a lot more often then intended because
the do_sync variable wasn't set to zero.

Cc: stable@vger.kernel.org # v3.11+
Fixes: c62988ec ('ceph: avoid meaningless calling ceph_caps_revoking if sync_mode == WB_SYNC_ALL.')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NIlya Dryomov <idryomov@redhat.com>

Signed-off-by: NYan, Zheng <zyan@redhat.com>

After converting inline data to normal data, client need to flush
the new i_inline_version (CEPH_INLINE_NONE) to MDS. This commit makes
cap messages (sent to MDS) contain inline_version and inline_data.
Client always converts inline data to normal data before data write,
so the inline data length part is always zero.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Before any data write, convert inline data to normal data and set
i_inline_version to CEPH_INLINE_NONE. The OSD request that saves
inline data to object contains 3 operations (CMPXATTR, WRITE and
SETXATTR). It compares a xattr named 'inline_version' to prevent
old data overwrites newer data.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

we can't use getattr to fetch inline data while holding Fr cap,
because it can cause deadlock. If we need to sync read inline data,
drop cap refs first, then use getattr to fetch inline data.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

we can't use getattr to fetch inline data after getting Fcr caps,
because it can cause deadlock. The solution is try bringing inline
data to page cache when not holding any cap, and hope the inline
data page is still there after getting the Fcr caps. If the page
is still there, pin it in page cache for later IO.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Add a new parameter 'locked_page' to ceph_do_getattr(). If inline data
in getattr reply will be copied to the page.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Request reply and cap message can contain inline data. add inline data
to the page cache if there is Fc cap.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Signed-off-by: NYan, Zheng <zyan@redhat.com>

allow specifying position of extent operation in multi-operations
osd request. This is required for cephfs to convert inline data to
normal data (compare xattr, then write object).
Signed-off-by: NYan, Zheng <zyan@redhat.com>
Reviewed-by: NIlya Dryomov <idryomov@redhat.com>

These were used to report git versions a long time ago.
Signed-off-by: NIlya Dryomov <idryomov@redhat.com>

Current snaphost code does not properly handle moving inode from one
empty snap realm to another empty snap realm. After changing inode's
snap realm, some dirty pages' snap context can be not equal to inode's
i_head_snap. This can trigger BUG() in ceph_put_wrbuffer_cap_refs()

The fix is introduce a global empty snap context for all empty snap
realm. This avoids triggering the BUG() for filesystem with no snapshot.

Fixes: http://tracker.ceph.com/issues/9928Signed-off-by: NYan, Zheng <zyan@redhat.com>
Reviewed-by: NIlya Dryomov <idryomov@redhat.com>

There were two places we were assigning version in host byte order
instead of network byte order.

Also in MSG_CLIENT_SESSION we weren't setting compat_version in the
header to reflect continued compatability with older MDSs.

Fixes: http://tracker.ceph.com/issues/9945Signed-off-by: NJohn Spray <john.spray@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Signed-off-by: NYan, Zheng <zyan@redhat.com>

The functions ceph_put_snap_context() and iput() test whether their
argument is NULL and then return immediately. Thus the test around the
call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
[idryomov@redhat.com: squashed rbd.c hunk, changelog]
Signed-off-by: NIlya Dryomov <idryomov@redhat.com>