While sending FW update cmds to the FW, the driver specifies the "type"
of each component that needs to be flashed. The FW then picks the offset
in the flash area at which the componnet is to be flashed. This doesn't work
when new components that the current FW doesn't recognize, need to be
flashed. Recent FWs (10.2 and above) support a scheme of FW-update wherein
the "offset" of the component in the flash area can be specified instead
of the "type". This patch uses the "offset" based FW-update mechanism and
only when it fails, it fallsback to the old "type" based update.
Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Skyhawk-B0 FW UFI is not compatible to flash on Skyhawk-P2 ASIC.
But, Skyhawk-P2 FW UFI is compatible with both B0 and P2 chips.
Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch re-factors the code that checks for flash file compatibility with
the chip type, for better readability, as follows:
	- be_get_ufi_type() returns the UFI type from the flash file
	- be_check_ufi_compatibility() checks if the UFI type is compatible
	  with the adapter/chip that is being flashed
Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

BIT(x) is the preffered usage.
Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Routines that are called only inside one src file must remain in that
file itself. Including them in a header file that is used for exporting
routine/struct definitions, causes unnecessary compilation of other
src files, when such a routine is modified.
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a missing bridge port check caught by smatch.

setlink/dellink of attributes like vlans can come for a bridge device
and there is no need to offload those today. So, this patch adds a bridge
port check. (In these cases however, the BRIDGE_SELF flags will always be set
and we may not hit a problem with the current code).

smatch complaint:

The patch 68e331c7: "bridge: offload bridge port attributes to
switch asic if feature flag set" from Jan 29, 2015, leads to the
following Smatch complaint:

net/bridge/br_netlink.c:552 br_setlink()
	 error: we previously assumed 'p' could be null (see line 518)

net/bridge/br_netlink.c
   517
   518		if (p && protinfo) {
                    ^
Check for NULL.
Reported-By: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-02-05

This series contains updates to fm10k, ixgbe and ixgbevf.

Matthew fixes an issue where fm10k does not properly drop the upper-most four
bits on of the VLAN ID due to type promotion, so resolve the issue by not
masking off the bits, but by throwing an error if the VLAN ID is out-of-bounds.
Then cleans up two cases where variables were not being used, but were
being set, so just remove the unused variables.

Don cleans up sparse errors in the x550 family file for ixgbe.  Fixed up
a redundant setting of the default value for set_rxpba, which was done
twice accidentally.  Cleaned up the probe routine to remove a redundant
attempt to identify the PHY, which could lead to a panic on x550.  Added
support for VXLAN receive checksum offload in x550 hardware.  Added the
Ethertype Anti-spoofing feature for affected devices.

Emil enables ixgbe and ixgbevf to allow multiple queues in SRIOV mode.
Adds RSS support for x550 per VF.  Fixed up a couple of issues introduced
in commit 2b509c0c ("ixgbe: cleanup ixgbe_ndo_set_vf_vlan"), fixed
setting of the VLAN inside ixgbe_enable_port_vlan() and disable the
"hide VLAN" bit in PFQDE when port VLAN is disabled.  Cleaned up the
setting of vlan_features by enabling all features at once.  Fixed the
ordering of the shutdown patch so that we attempt to shutdown the rings
more gracefully.  We shutdown the main Rx filter in the case of Rx and we
set the carrier_off state in the case of Tx so that packets stop being
delivered from outside the driver.  Then we shutdown interrupts and NAPI,
then finally stop the rings from performing DMA and clean them.  Added
code to allow for Tx hang checking to provide more robust debug info in
the event of a transmit unit hang in ixgbevf.  Cleaned up ixgbevf logic
dealing with link up/down by breaking down the link detection and up/down
events into separate functions, similar to how these events are handled
in other drivers.  Combined the ixgbevf reset and watchdog tasks into a
single task so that we can avoid multiple schedules of the reset task when
we have a reset event needed due to either the mailbox going down or
transmit packets being present on a link down.

v2: Fixed up patch #3 of the series to remove the variable type change
    based on feedback from David Laight
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hayes Wang says:

====================
r8152: adjust the code

V2:
Correct the subject of patch #5. Replace "link feed" with "line feed".

v1:
Code adjustment.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use BIT macro to replace (1 << bits).
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

vlan_get_protocol() has been defined and use it to replace
get_protocol().
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Keep NETIF_F_HW_VLAN_CTAG_RX and NETIF_F_HW_VLAN_CTAG_TX at the
same line.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is unnecessary to accress the hw register if the device is unplugged.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace (tp->speed & LINK_STATUS) with netif_carrier_ok().
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set LPM timer to 500us, except for RTL_VER_04 which doesn't link at
USB 3.0.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a error occurs when submitting rx, skip the remaining submissions
and try to submit them again next time.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 083735f4 ("rds: switch rds_message_copy_from_user() to iov_iter")
breaks rds_message_copy_from_user() semantics on success, and causes it
to return nbytes copied, when it should return 0.  This commit fixes that bug.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The macro rdsdebug is defined as

  pr_debug("%s(): " fmt, __func__ , ##args)

Hence it doesn't make sense to include the name of the calling
function explicitly in the format string passed to rdsdebug.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

OVS userspace already probes the openvswitch kernel module for
OVS_ACTION_ATTR_SET_MASKED support.  This patch adds the kernel module
implementation of masked set actions.

The existing set action sets many fields at once.  When only a subset
of the IP header fields, for example, should be modified, all the IP
fields need to be exact matched so that the other field values can be
copied to the set action.  A masked set action allows modification of
an arbitrary subset of the supported header bits without requiring the
rest to be matched.

Masked set action is now supported for all writeable key types, except
for the tunnel key.  The set tunnel action is an exception as any
input tunnel info is cleared before action processing starts, so there
is no tunnel info to mask.

The kernel module converts all (non-tunnel) set actions to masked set
actions.  This makes action processing more uniform, and results in
less branching and duplicating the action processing code.  When
returning actions to userspace, the fully masked set actions are
converted back to normal set actions.  We use a kernel internal action
code to be able to tell the userspace provided and converted masked
set actions apart.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: dsa: bcm_sf2: GPHY power down

This patch series implement GPHY power up and down in the SF2 switch
driver in order to conserve power whenever possible (e.g: port is brought
down or unused during Wake-on-LAN).
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement the power on/off recommended procedure for the Single GPHY we
have on our Starfighter 2 switch. In order to make sure we get proper
LED link/activity signaling during suspend, switch the link indication
from the Switch/MAC to the PHY.

Finally, since the GPHY needs to be reset to be put in low power mode,
we will loose any context applied to it: workarounds, EEE etc.. so we
need to call phy_init_hw() to get our fixups re-applied successfully.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the code that touches the single GPHY register from
bcm_sf2_sw_resume() to a separate function since we will have to
enable/disable the GPHY from different locations, and we want the code
to be self-contained.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NFC: 3.20 second pull request

This is the second NFC pull request for 3.20.

It brings:

- NCI NFCEE (NFC Execution Environment, typically an embedded or
  external secure element) discovery and enabling/disabling support.
  In order to communicate with an NFCEE, we also added NCI's logical
  connections support to the NCI stack.

- HCI over NCI protocol support. Some secure elements only understand
  HCI and thus we need to send them HCI frames when they're part of
  an NCI chipset.

- NFC_EVT_TRANSACTION userspace API addition. Whenever an application
  running on a secure element needs to notify its host counterpart,
  we send an NFC_EVENT_SE_TRANSACTION event to userspace through the
  NFC netlink socket.

- Secure element and HCI transaction event support for the st21nfcb
  chipset.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The remove logic properly searched the remaining chain for a matching
entry with an identical hash but it did this while searching from both
the old and new table. Instead in order to not leave stale references
behind we need to:

 1. When growing and searching from the new table:
    Search remaining chain for entry with same hash to avoid having
    the new table directly point to a entry with a different hash.

 2. When shrinking and searching from the old table:
    Check if the element after the removed would create a cross
    reference and avoid it if so.

These bugs were present from the beginning in nft_hash.

Also, both insert functions calculated the hash based on the mask of
the new table. This worked while growing. Wwhile shrinking, the mask
of the inew table is smaller than the mask of the old table. This lead
to a bit not being taken into account when selecting the bucket lock
and thus caused the wrong bucket to be locked eventually.

Fixes: 7e1e7763 ("lib: Resizable, Scalable, Concurrent Hash Table")
Fixes: 97defe1e ("rhashtable: Per bucket locks & deferred expansion/shrinking")
Reported-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Thomas Graf says:

====================
rhashtable fixes

This series fixes all remaining known issues with rhashtable that
have been reported. In particular the race condition reported by
Ying Xue.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During a resize, when two buckets in the larger table map to
a single bucket in the smaller table and the new table has already
been (partially) linked to the old table. Removal of an element
may result the bucket in the larger table to point to entries
which all hash to a different value than the bucket index. Thus
causing two buckets to point to the same sub chain after unzipping.
This is not illegal *during* the resize phase but after it has
completed.

Keep the old table around until all of the unzipping is done to
allow the removal code to only search for matching hashed entries
during this special period.
Reported-by: NYing Xue <ying.xue@windriver.com>
Fixes: 97defe1e ("rhashtable: Per bucket locks & deferred expansion/shrinking")
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Catch hash miscalculations which result in hard to track down race
conditions.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This simplifies debugging of locking violations if compiled with
CONFIG_PROVE_LOCKING.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to wait for all RCU readers to complete after the last bit of
unzipping has been completed. Otherwise the old table is freed up
prematurely.

Fixes: 7e1e7763 ("lib: Resizable, Scalable, Concurrent Hash Table")
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rhashtable currently allows to use a bucket lock per bucket. This
requires multiple levels of complicated nested locking because when
resizing, a single bucket of the smaller table will map to two
buckets in the larger table. So far rhashtable has explicitly locked
both buckets in the larger table.

By excluding the highest bit of the hash from the bucket lock map and
thus only allowing locks to buckets in a ratio of 1:2, the locking
can be simplified a lot without losing the benefits of multiple locks.
Larger tables which benefit from multiple locks will not have a single
lock per bucket anyway.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The value computed by key_hashfn() is used by rhashtable_lookup_compare()
to traverse both tables during a resize. key_hashfn() must therefore
return the hash value without the buckets mask applied so it can be
masked to the size of each individual table.

Fixes: 97defe1e ("rhashtable: Per bucket locks & deferred expansion/shrinking")
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch enables the ethertype Anti-Spoofing feature for affected
devices. It is configured such that LLDP packets sent by a VF will
be dropped.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This change combines the reset and watchdog tasklets into a single task.

The advantage of this is that we can avoid multiple schedules of the reset
task when we have a reset event needed due to either the mailbox going down
or transmit packets being present on a link down.

CC: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch cleans up the logic dealing with link down/up by breaking down the
link detection and up/down events into separate functions - similar to how these
events are handled in other drivers.

CC: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds code to allow for Tx hang checking.  The idea is to provide
more robust debug info in the event of a transmit unit hang. Similar to the
logic in ixgbe.

CC: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch updates the ordering of the shutdown path so that we attempt to
shutdown the rings more gracefully. Basically the big changes are that we
shutdown the main Rx filter in the case of Rx and we set the carrier_off
state in the case of Tx so that packets stop being delivered from outside
the driver.  Then we shut down interrupts and NAPI.  Finally we stop the
rings from performing DMA and clean them.  This is a bit more graceful than
the previous path.

CC: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Clean up the setting of vlan_features by enabling all features at once.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add support VXLAN receive checksum offload in X550 hardware.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

We always identify the PHY in our reset_hw path anyway so there is
no need to do it in get_invariants().  The reason I even noticed this
is that for new hardware (X550em) we don't assign some methods until
later in probe and calling phy.ops.read_reg could lead to a panic.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

My original patch 6a14ee0c "ixgbe: Add X550 support function pointers"
accidental set a default value for this structure member twice.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes couple of issues introduced by
commit 2b509c0c ("ixgbe: cleanup ixgbe_ndo_set_vf_vlan")

- fix setting of the VLAN inside ixgbe_enable_port_vlan()
- disable the "hide VLAN" bit in PFQDE when port VLAN is disabled
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>