- 24 9月, 2009 2 次提交
-
-
由 Rudolf Marek 提交于
Fix Atom CPUs support. Intel documents TjMax at 90 degrees C but some Atoms may have 125 degrees C (this is undocumented speculation). Signed-off-by: NRudolf Marek <r.marek@assembler.cz> Cc: Huaxu Wan <huaxu.wan@linux.intel.com> Cc: Kent Liu <kent.liu@linux.intel.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The legacy fscpos and fscher drivers have been replaced by the unified fschmd driver. The transition period is over now, we can delete them. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NHans de Goede <hdegoede@redhat.com>
-
- 17 9月, 2009 2 次提交
-
-
由 Mark Brown 提交于
This driver adds support for the hardware monitoring features of the WM831x PMICs to the hwmon API. Monitoring is provided for the system voltages supported natively by the WM831x, the chip temperature, the battery temperature and the auxiliary inputs of the WM831x. Currently no alarms are supported, though digital comparators on the WM831x devices would allow these to be provided. Since the auxiliary and battery temperature input scaling depends on the system configuration the value is reported as a voltage to userspace. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
This driver provides reporting of the status supply voltage rails of the WM835x series of PMICs via the hwmon API. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 15 9月, 2009 2 次提交
-
-
由 Jean Delvare 提交于
Now that we have ACPI-based hardware monitoring drivers, and we will start telling users to use them instead of native drivers when I/O resources conflict, I think it would be good to clearly mark ACPI drivers as such in Kconfig. Also, in the case of monolithic kernels, I think the ACPI drivers should take precedence over native drivers, so they should be listed first in Makefile. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Luca Tettamanti <kronos.it@gmail.com>
-
由 Andre Prendel 提交于
Add support for Texas Instruments TMP421/422/423 temperature sensor IC. TI's TMP421/422/423 are I2C temperature sensor chips. These chips are similar to TI's TMP401/411 chips, but with reduced functionality (only temperature measurement). The chips have one local sensor and up to three (TMP423) remote sensors. Signed-off-by: NAndre Prendel <andre.prendel@gmx.de> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 18 7月, 2009 1 次提交
-
-
由 Ben Dooks 提交于
Add support for the ADC controller on the S3C series of processors to drivers/hwmon for use with hardware monitoring systems. Signed-off-by: NBen Dooks <ben@simtec.co.uk> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 17 6月, 2009 1 次提交
-
-
由 Eric Piel 提交于
Now that there is no need to hookup on the open/close of the joystick, it's possible to use the simplified interface input_polled_device, instead of creating our own kthread. [randy.dunlap@oracle.com: fix Kconfig] [randy.dunlap@oracle.com: fix Kconfig some more] Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 6月, 2009 3 次提交
-
-
由 Hans de Goede 提交于
Add support for the hwmon part of the Fintek F71858FG superio IC to the f71882fg driver. Many thanks to Jelle de Jong for lending me a motherboard with this superio on it. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
This is a new hwmon driver for TI's TMP401 temperature sensor IC. This driver was written on behalf of an embedded systems vendor under the Linux driver project. It has been tested using a TI TMP401 sample attached to a i2c-tiny-usb adapter. Which was provided by Till Harbaum, many thanks to him for this! Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Darrick J. Wong 提交于
Enable auto-probing for the HC10 blade and amend the supported system list. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 14 4月, 2009 1 次提交
-
-
由 Jonathan Cameron 提交于
Data sheet at: http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf These sensors communicate over a 2 wire bus running a device specific protocol. The complexity of the driver is mainly due to handling the substantial delays between requesting a reading and the device pulling the data line low to indicate that the data is available. This is handled by an interrupt that is disabled under all other conditions. I wasn't terribly clear on the best way to handle this, so comments on that aspect would be particularly welcome! Interpretation of the temperature depends on knowing the supply voltage. If configured in a board config as a regulator consumer this is obtained from the regulator subsystem. If not it should be provided in the platform data. I've placed this driver in the hwmon subsystem as it is definitely a device that may be used for hardware monitoring and with it's relatively slow response times (up to 120 millisecs to get a reading) a caching strategy certainly seems to make sense! Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 4月, 2009 2 次提交
-
-
由 Herbert Valerio Riedel 提交于
This controller can be found on the D-Link DNS-323 for instance, where it is to be configured via static i2c_board_info in the board-specific mach-orion/dns323-setup.c; this driver supports only the new-style driver model. Tested-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NHerbert Valerio Riedel <hvr@gnu.org> Signed-off-by: NMatthew Palmer <mpalmer@debian.org> Signed-off-by: NLaurie Bradshaw <bradshaw.laurie@googlemail.com> Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Luca Tettamanti 提交于
Asus boards have an ACPI interface for interacting with the hwmon (fan, temperatures, voltages) subsystem; this driver exposes the relevant information via the standard sysfs interface. There are two different ACPI interfaces: - an old one (based on RVLT/RFAN/RTMP) - a new one (GGRP/GITM) Both may be present but there a few cases (my board, sigh) where the new interface is just an empty stub; the driver defaults to the old one when both are present. The old interface has received a considerable testing, but I'm still awaiting confirmation from my tester that the new one is working as expected (hence the debug code is still enabled). Currently all the attributes are read-only, though a (partial) control should be possible with a bit more work. Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 01 4月, 2009 3 次提交
-
-
由 Daniel Mack 提交于
Make use of the new abstraction layer and add a new transport layer for spi. Works fine on a PXA based board. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Acked-by: NPavel Machek <pavel@ucw.cz> Acked-by: NEric Piel <eric.piel@tremplin-utc.net> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ira Snyder 提交于
Add Linux support for the Linear Technology LTC4215 Hot Swap controller I2C monitoring interface. I have tested the driver with my board, and it appears to work fine. With the power supplies disabled, it reads 11.93V input, 1.93V output, no current and no power. With the supplies enabled, it reads 11.93V input, 11.98V output, no current, no power. I'm not drawing any current at the moment, so this is reasonable. The value in the sense register never reads anything except 0, so I expect to get zero from the current and power calculations. I didn't attempt to support changing any of the chip's settings or enabling the FET. I'm not sure even how to do that and still fit within the hwmon framework. :) Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davide Rizzo 提交于
An hwmon driver for the National Semiconductor LM95241 triple temperature sensors chip Signed-off-by: NDavide Rizzo <elpa-rizzo@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 3月, 2009 4 次提交
-
-
由 Hans de Goede 提交于
Add support for the Hades to the FSC hwmon driver. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
Many thanks to Fujitsu Siemens Computers for providing docs and a machine to test the driver on. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Directory drivers/i2c/chips is going away, so drivers there must find new homes. For the pcf8591 driver, the best choice seems to be the hwmon subsystem. While the Philips PCF8591 device isn't a typical hardware monitoring chip, its DAC interface is compatible with the hwmon one, so it fits somewhat. If a better subsystem is ever created for ADC/DAC chips, the driver could be moved there. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
-
由 Gong Jun 提交于
Add initial support for the Nuvoton W83667HG chip to the w83627ehf driver. It has been tested on ASUS P5QL PRO by Gong Jun. At the moment there is still a usability issue which is that only in6 or temp3 can be present on the W83667HG, so the driver shouldn't expose both. This will be addressed later. Signed-off-by: NGong Jun <JGong@nuvoton.com> Acked-by: NDavid Hubbard <david.c.hubbard@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 12 3月, 2009 1 次提交
-
-
由 Darrick J. Wong 提交于
Update documentation to prevent further confusion/duplication. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 16 1月, 2009 2 次提交
-
-
由 Eric Piel 提交于
Move the second part of the HP laptop disk protection functionality (a red led) to the same driver. From a purely Linux developer's point of view, the led and the accelerometer have nothing related. However, they correspond to the same ACPI functionality, and so will always be used together, moreover as they share the same ACPI PNP alias, there is no other simple to allow to have same loaded at the same time if they are not in the same module. Also make it requires the led class to compile and update the Kconfig text. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jordan Crouse 提交于
Hwmon driver for the ADT7475 chip. Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 07 1月, 2009 6 次提交
-
-
由 Manuel Lauss 提交于
The Texas Instruments TMP121 is a SPI temperature sensor very similar to the LM70, with slightly higher resolution. This patch extends the LM70 driver to support the TMP121. The TMP123 differs in pin assign- ment. Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
Now that the new merged fschmd driver has gained support for the watchdog integrated into these IC's, there is no more reason to keep the old fscher and fscpos drivers around, so mark them as deprecated. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
This patch adds support for the watchdog part found in _all_ supported FSC sensor chips. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean-Marc Spaggiari 提交于
Allow it87.c to handle IT8720 chipset like IT8718 in order to retrieve voltage, temperatures and fans speed from sensors tools. Also updating the related documentation. Signed-off-by: NJean-Marc Spaggiari <jean-marc@spaggiari.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Ira Snyder 提交于
Add Linux support for the Linear Technology LTC4245 Multiple Supply Hot Swap controller I2C monitoring interface. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
Add some documentation about the f71882fg driver, and update the Kconfig documentation to report the new supported models. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 13 11月, 2008 2 次提交
-
-
由 Darrick J. Wong 提交于
New driver to play with. As Jean mentioned a couple of years ago, this chip is a beast with odd combinations of 8 fans, 4 temperatures, and 13 voltage sensors. This driver has been tested on an IntelliStation Z30. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pavel Machek 提交于
This adds a driver to the accelerometer sensor found in several HP laptops (under the commercial names of "HP Mobile Data Protection System 3D" and "HP 3D driveguard"). It tries to have more or less the same interfaces as the hdaps and other accelerometer drivers: in sysfs and as a joystick. This driver was first written by Yan Burman. Eric Piel has updated it and slimed it up (including the removal of an interface to access to the free-fall feature of the sensor because it is not reliable enough for now). Pavel Machek removed few more features and switched locking from semaphore to mutex. Several people have contributed to the database of the axes. [eric.piel@tremplin-utc.net: LIS3LV02D: Conform to the new ACPI API] Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NYan Burman <burman.yan@gmail.com> Signed-off-by: NPavel Machek <pavel@suse.cz> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 10月, 2008 2 次提交
-
-
由 Ben Hutchings 提交于
These Maxim chips are similar to MAX6657 but use unsigned temperature values to allow for readings up to 145 degrees. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Nate Case 提交于
Support ADT7461 in extended temperature range mode, which will change the range of readings from 0..127 to -64..191 degC. Adjust the register conversion functions accordingly. Signed-off-by: NNate Case <ncase@xes-inc.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NMartyn Welch <martyn.welch@gefanuc.com>
-
- 24 9月, 2008 1 次提交
-
-
由 Eric Miao 提交于
Driver based on corgi_ssp.c and sharpsl_pm.c, previously done by Richard Purdie and many others. Now changed to generic HWMON device and expose all the ADC input value through sysfs. Signed-off-by: NEric Miao <eric.miao@marvell.com> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 25 8月, 2008 1 次提交
-
-
由 David S. Miller 提交于
This is a PIC16F747 based controller that monitors and consolidates the hardware access to various fan and temperature values reported by adr7462 and similar devices behind an I2C bus. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2008 1 次提交
-
-
由 Marc Pignat 提交于
SPI driver for analog to digital converters national semiconductor ADC081S101, ADC124S501, ... Code for 8 channels by Tobias Himmer. This driver adds support for National Semiconductor ADC<bb><c>S<sss> chip family, where: * bb is the resolution in number of bits (8, 10, 12) * c is the number of channels (1, 2, 4, 8) * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS and 101 for 1 MSPS) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NMarc Pignat <marc.pignat@hevs.ch> Cc: Tobias Himmer <tobias@himmer-online.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 8月, 2008 3 次提交
-
-
由 Sean MacLennan 提交于
Driver for the Analog Devices AD7414 temperature monitoring chip. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Grant Coady 提交于
The adm9240 driver is in the kernel for three years now, time to remove the EXPERIMENTAL dependency. Signed-off-by: NGrant Coady <gcoady.lk@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Juerg Haefliger 提交于
Add support for the SCH5027. The differences to the DME1737 are: - No support for programmable temp offsets - In auto mode, PWM outputs stay on min value if temp goes below low threshold and can't be programmed to fully turn off - Different voltage scaling - No VID input Signed-off-by: NJuerg Haefliger <juergh@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-