- 12 10月, 2011 10 次提交
-
-
由 Peter Ujfalusi 提交于
If the client only interested, if any of the vibra channels enabled, or if any of the channels are set to receive audio data via PDM. This function targets mainly the vibra driver, so it can check if it is allowed to execute effects ot not. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: NSamuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
The vibra control register will be used from the ASoC codec driver as well. In order to avoid latency issues caused by I2C read access, cache the two control register within the core driver, so we do not need to reach out to the chip to read it back. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: NSamuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
The bits within the two control registers (for left and right channel) are identical. Use common names for the bits acros the two register. Also add the missing definition for the path selection bit. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
We set hw_params callback for wm8994_aif3_dai_ops to wm8994_aif3_hw_params. Thus no need to check wm8994-aif3 in wm8994_hw_params. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
This is not required after multi-component patch. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
This ensures they are available prior to the card late_probe(). Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The WM5100 includes an advanced, low power, accessory detect subsystem capable of detecting both accessory presence and button presses while the device is in an ultra low power mode. Implement initial support for this. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 11 10月, 2011 6 次提交
-
-
由 Wolfram Sang 提交于
It is currently named "TVL" instead of "TLV". Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
The WM8983 can be reset by performing a write of any value to the software reset register. To avoid writing to the software reset register while resume, we should write the same value in wm8983_reg_defs to software reset register in wm8983_probe(). The write to the reset register is suppressed by the cache restore code when it skips writes of default registers. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 10 10月, 2011 24 次提交
-
-
由 Peter Ujfalusi 提交于
Pass the DAPM widgets/routes via the snd_soc_card struct to core. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Pass the DAPM widgets/routes via the snd_soc_card struct to core. With this change we do not need the init function since the remaining snd_soc_dapm_enable_pin calls are not needed. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Pass the DAPM widgets/routes and static controls via the snd_soc_card struct to core. In this way the machine driver does not need to handle the DAPM widgets/routes. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Pass the DAPM widgets/routes via the snd_soc_card struct to core. With this change we do not need the init function since the remaining snd_soc_dapm_enable_pin calls are not needed. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Cc: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Widgets are connected by default. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Pass the DAPM widgets/routes via the snd_soc_card struct to core. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Widgets are connected by default. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Pass the DAPM widgets/routes via the snd_soc_card struct to core. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
No need to call soc_dapm_sync at init time. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Cc: Anuj Aggarwal <anuj.aggarwal@ti.com> Cc: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Gražvydas Ignotas <notasas@gmail.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSangbeom Kim <sbkim73@samsung.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSangbeom Kim <sbkim73@samsung.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSangbeom Kim <sbkim73@samsung.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSangbeom Kim <sbkim73@samsung.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSangbeom Kim <sbkim73@samsung.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Michael Opdenacker 提交于
Signed-off-by: NMichael Opdenacker <michael.opdenacker@linaro.org> Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-