The redistributor needs to be told which vPE is about to be run,
and tells us whether there is any pending VLPI on exit.

Let's add the scheduling calls to the vgic flush/sync functions,
allowing the VLPIs to be delivered to the guest.
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

In order to control the GICv4 view of virtual CPUs, we rely
on an irqdomain allocated for that purpose. Let's add a couple
of helpers to that effect.

At the same time, the vgic data structures gain new fields to
track all this... erm... wonderful stuff.

The way we hook into the vgic init is slightly convoluted. We
need the vgic to be initialized (in order to guarantee that
the number of vcpus is now fixed), and we must have a vITS
(otherwise this is all very pointless). So we end-up calling
the init from both vgic_init and vgic_its_create.
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Add a new has_gicv4 field in the global VGIC state that indicates
whether the HW is GICv4 capable, as a per-VM predicate indicating
if there is a possibility for a VM to support direct injection
(the above being true and the VM having an ITS).
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

The whole MSI injection process is fairly monolithic. An MSI write
gets turned into an injected LPI in one swift go. But this is actually
a more fine-grained process:

- First, a virtual ITS gets selected using the doorbell address
- Then the DevID/EventID pair gets translated into an LPI
- Finally the LPI is injected

Since the GICv4 code needs the first two steps in order to match
an IRQ routing entry to an LPI, let's expose them as helpers,
and refactor the existing code to use them
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

We are about to optimize our timer handling logic which involves
injecting irqs to the vgic directly from the irq handler.

Unfortunately, the injection path can take any AP list lock and irq lock
and we must therefore make sure to use spin_lock_irqsave where ever
interrupts are enabled and we are taking any of those locks, to avoid
deadlocking between process context and the ISR.

This changes a lot of the VGIC code, but the good news are that the
changes are mostly mechanical.
Acked-by: NMarc Zyngier <marc,zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

As we are about to access the APRs from the GICv2 uaccess interface,
make this logic generally available.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

We have been a little loose with our intermediate VMCR representation
where we had a 'ctlr' field, but we failed to differentiate between the
GICv2 GICC_CTLR and ICC_CTLR_EL1 layouts, and therefore ended up mapping
the wrong bits into the individual fields of the ICH_VMCR_EL2 when
emulating a GICv2 on a GICv3 system.

Fix this by using explicit fields for the VMCR bits instead.

Cc: Eric Auger <eric.auger@redhat.com>
Reported-by: Nwanghaibin <wanghaibin.wang@huawei.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>

We have to register the ITS iodevice before running the VM, because in
migration scenarios, we may be restoring a live device that wishes to
inject MSIs before the VCPUs have started.

All we need to register the ITS io device is the base address of the
ITS, so we can simply register that when the base address of the ITS is
set.

  [ Code to fix concurrency issues when setting the ITS base address and
    to fix the undef base address check written by Marc Zyngier ]
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>

Instead of waiting with registering KVM iodevs until the first VCPU is
run, we can actually create the iodevs when the redist base address is
set.  The only downside is that we must now also check if we need to do
this for VCPUs which are created after creating the VGIC, because there
is no enforced ordering between creating the VGIC (and setting its base
addresses) and creating the VCPUs.
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>

As we are about to fiddle with the IO device registration mechanism,
let's be a little more careful when setting base addresses as early as
possible.  When setting a base address, we can check that there's
address space enough for its scope and when the last of the two
base addresses (dist and redist) get set, we can also check if the
regions overlap at that time.

This allows us to provide error messages to the user at time when trying
to set the base address, as opposed to later when trying to run the VM.

To do this,  we make vgic_v3_check_base available in the core vgic-v3
code as well as in the other parts of the GICv3 code, namely the MMIO
config code.

We also return true for undefined base addresses so that the function
can be used before all base addresses are set; all callers already check
for uninitialized addresses before calling this function.
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>

Split out the function to register all the redistributor iodevs into a
function that handles a single redistributor at a time in preparation
for being able to call this per VCPU as these get created.
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>

This patch adds a new attribute to GICV3 KVM device
KVM_DEV_ARM_VGIC_GRP_CTRL group. This allows userspace to
flush all GICR pending tables into guest RAM.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

Implement routines to save and restore device ITT and their
interrupt table entries (ITE).
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>

This patch saves the device table entries into guest RAM.
Both flat table and 2 stage tables are supported. DeviceId
indexing is used.

For each device listed in the device table, we also save
the translation table using the vgic_its_save/restore_itt
routines. Those functions will be implemented in a subsequent
patch.

On restore, devices are re-allocated and their itt are
re-built.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>

The save path copies the collection entries into guest RAM
at the GPA specified in the BASER register. This obviously
requires the BASER to be set. The last written element is a
dummy collection table entry.

We do not index by collection ID as the collection entry
can fit into 8 bytes while containing the collection ID.

On restore path we re-allocate the collection objects.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

this new helper synchronizes the irq pending_latch
with the LPI pending bit status found in rdist pending table.
As the status is consumed, we reset the bit in pending table.

As we need the PENDBASER_ADDRESS() in vgic-v3, let's move its
definition in the irqchip header. We restore the full length
of the field, ie [51:16]. Same for PROPBASER_ADDRESS with full
field length of [51:12].
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>

We need to use those helpers in vgic-its.c so let's
expose them in the private vgic header.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>

Since we always read back the LRs that we wrote to the guest and the
MISR and EISR registers simply provide a summary of the configuration of
the bits in the LRs, there is really no need to read back those status
registers and process them.  We might as well just signal the
notifyfd when folding the LR state and save some cycles in the process.
We now clear the underflow bit in the fold_lr_state functions as we only
need to clear this bit if we had used all the LRs, so this is as good a
place as any to do that work.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

We don't have to save/restore the VMCR on every entry to/from the guest,
since on GICv2 we can access the control interface from EL1 and on VHE
systems with GICv3 we can access the control interface from KVM running
in EL2.

GICv3 systems without VHE becomes the rare case, which has to
save/restore the register on each round trip.

Note that userspace accesses may see out-of-date values if the VCPU is
running while accessing the VGIC state via the KVM device API, but this
is already the case and it is up to userspace to quiesce the CPUs before
reading the CPU registers from the GIC for an up-to-date view.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

As an oversight, for GICv2, we accidentally export the GICC_PMR register
in the format of the GICH_VMCR.VMPriMask field in the lower 5 bits of a
word, meaning that userspace must always use the lower 5 bits to
communicate with the KVM device and must shift the value left by 3
places to obtain the actual priority mask level.

Since GICv3 supports the full 8 bits of priority masking in the ICH_VMCR,
we have to fix the value we export when emulating a GICv2 on top of a
hardware GICv3 and exporting the emulated GICv2 state to userspace.

Take the chance to clarify this aspect of the ABI.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

We currently have some code to clear the list registers on GICv3, but we
never call this code, because the caller got nuked when removing the old
vgic.  We also used to have a similar GICv2 part, but that got lost in
the process too.

Let's reintroduce the logic for GICv2 and call the logic when we
initialize the use of hypervisors on the CPU, for example when first
loading KVM or when exiting a low power state.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Userspace requires to store and restore of line_level for
level triggered interrupts using ioctl KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO.
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@cavium.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

VGICv3 CPU interface registers are accessed using
KVM_DEV_ARM_VGIC_CPU_SYSREGS ioctl. These registers are accessed
as 64-bit. The cpu MPIDR value is passed along with register id.
It is used to identify the cpu for registers access.

The VM that supports SEIs expect it on destination machine to handle
guest aborts and hence checked for ICC_CTLR_EL1.SEIS compatibility.
Similarly, VM that supports Affinity Level 3 that is required for AArch64
mode, is required to be supported on destination machine. Hence checked
for ICC_CTLR_EL1.A3V compatibility.

The arch/arm64/kvm/vgic-sys-reg-v3.c handles read and write of VGIC
CPU registers for AArch64.

For AArch32 mode, arch/arm/kvm/vgic-v3-coproc.c file is created but
APIs are not implemented.

Updated arch/arm/include/uapi/asm/kvm.h with new definitions
required to compile for AArch32.

The version of VGIC v3 specification is defined here
Documentation/virtual/kvm/devices/arm-vgic-v3.txt
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@cavium.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

ICC_VMCR_EL2 supports virtual access to ICC_IGRPEN1_EL1.Enable
and ICC_IGRPEN0_EL1.Enable fields. Add grpen0 and grpen1 member
variables to struct vmcr to support read and write of these fields.

Also refactor vgic_set_vmcr and vgic_get_vmcr() code.
Drop ICH_VMCR_CTLR_SHIFT and ICH_VMCR_CTLR_MASK macros and instead
use ICH_VMCR_EOI* and ICH_VMCR_CBPR* macros.
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

VGICv3 Distributor and Redistributor registers are accessed using
KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_REDIST_REGS
with KVM_SET_DEVICE_ATTR and KVM_GET_DEVICE_ATTR ioctls.
These registers are accessed as 32-bit and cpu mpidr
value passed along with register offset is used to identify the
cpu for redistributor registers access.

The version of VGIC v3 specification is defined here
Documentation/virtual/kvm/devices/arm-vgic-v3.txt

Also update arch/arm/include/uapi/asm/kvm.h to compile for
AArch32 mode.
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add a file to debugfs to read the in-kernel state of the vgic.  We don't
do any locking of the entire VGIC state while traversing all the IRQs,
so if the VM is running the user/developer may not see a quiesced state,
but should take care to pause the VM using facilities in user space for
that purpose.

We also don't support LPIs yet, but they can be added easily if needed.
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Tested-by: NEric Auger <eric.auger@redhat.com>
Tested-by: NAndre Przywara <andre.przywara@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

One of the goals behind the VGIC redesign was to get rid of cached or
intermediate state in the data structures, but we decided to allow
ourselves to precompute the pending value of an IRQ based on the line
level and pending latch state.  However, this has now become difficult
to base proper GICv3 save/restore on, because there is a potential to
modify the pending state without knowing if an interrupt is edge or
level configured.

See the following post and related message for more background:
https://lists.cs.columbia.edu/pipermail/kvmarm/2017-January/023195.html

This commit gets rid of the precomputed pending field in favor of a
function that calculates the value when needed, irq_is_pending().

The soft_pending field is renamed to pending_latch to represent that
this latch is the equivalent hardware latch which gets manipulated by
the input signal for edge-triggered interrupts and when writing to the
SPENDR/CPENDR registers.

After this commit save/restore code should be able to simply restore the
pending_latch state, line_level state, and config state in any order and
get the desired result.
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

This patch allows to build and use vGICv3 ITS in 32-bit mode.
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

This patch allows to build and use vgic-v3 in 32-bit mode.

Unfortunately, it can not be split in several steps without extra
stubs to keep patches independent and bisectable.  For instance,
virt/kvm/arm/vgic/vgic-v3.c uses function from vgic-v3-sr.c, handling
access to GICv3 cpu interface from the guest requires vgic_v3.vgic_sre
to be already defined.

It is how support has been done:

* handle SGI requests from the guest

* report configured SRE on access to GICv3 cpu interface from the guest

* required vgic-v3 macros are provided via uapi.h

* static keys are used to select GIC backend

* to make vgic-v3 build KVM_ARM_VGIC_V3 guard is removed along with
  the static inlines
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

By now ITS code guarded with KVM_ARM_VGIC_V3 config option which was
introduced to hide everything specific to vgic-v3 from 32-bit world.
We are going to support vgic-v3 in 32-bit world and KVM_ARM_VGIC_V3
will gone, but we don't have support for ITS there yet and we need to
continue keeping ITS away.
Introduce the new config option to prevent ITS code being build in
32-bit mode when support for vgic-v3 is done.
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Currently we register an ITS device upon userland issuing the CTLR_INIT
ioctl to mark initialization of the ITS as done.
This deviates from the initialization sequence of the existing GIC
devices and does not play well with the way QEMU handles things.
To be more in line with what we are used to, register the ITS(es) just
before the first VCPU is about to run, so in the map_resources() call.
This involves iterating through the list of KVM devices and map each
ITS that we find.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Tested-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Instead of sprinkling raw kref_get() calls everytime we cannot
do a normal vgic_get_irq(), use the existing vgic_get_irq_kref(),
which does the same thing and is paired with a vgic_put_irq().

vgic_get_irq_kref is moved to vgic.h in order to be easily shared.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Now that all ITS emulation functionality is in place, we advertise
MSI functionality to userland and also the ITS device to the guest - if
userland has configured that.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When userland wants to inject an MSI into the guest, it uses the
KVM_SIGNAL_MSI ioctl, which carries the doorbell address along with
the payload and the device ID.
With the help of the KVM IO bus framework we learn the corresponding
ITS from the doorbell address. We then use our wrapper functions to
iterate the linked lists and find the proper Interrupt Translation Table
Entry (ITTE) and thus the corresponding struct vgic_irq to finally set
the pending bit.
We also provide the handler for the ITS "INT" command, which allows a
guest to trigger an MSI via the ITS command queue. Since this one knows
about the right ITS already, we directly call the MMIO handler function
without using the kvm_io_bus framework.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The LPI pending status for a GICv3 redistributor is held in a table
in (guest) memory. To achieve reasonable performance, we cache the
pending bit in our struct vgic_irq. The initial pending state must be
read from guest memory upon enabling LPIs for this redistributor.
As we can't access the guest memory while we hold the lpi_list spinlock,
we create a snapshot of the LPI list and iterate over that.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Introduce a new KVM device that represents an ARM Interrupt Translation
Service (ITS) controller. Since there can be multiple of this per guest,
we can't piggy back on the existing GICv3 distributor device, but create
a new type of KVM device.
On the KVM_CREATE_DEVICE ioctl we allocate and initialize the ITS data
structure and store the pointer in the kvm_device data.
Upon an explicit init ioctl from userland (after having setup the MMIO
address) we register the handlers with the kvm_io_bus framework.
Any reference to an ITS thus has to go via this interface.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The ARM GICv3 ITS emulation code goes into a separate file, but needs
to be connected to the GICv3 emulation, of which it is an option.
The ITS MMIO handlers require the respective ITS pointer to be passed in,
so we amend the existing VGIC MMIO framework to let it cope with that.
Also we introduce the basic ITS data structure and initialize it, but
don't return any success yet, as we are not yet ready for the show.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In the moment our struct vgic_irq's are statically allocated at guest
creation time. So getting a pointer to an IRQ structure is trivial and
safe. LPIs are more dynamic, they can be mapped and unmapped at any time
during the guest's _runtime_.
In preparation for supporting LPIs we introduce reference counting for
those structures using the kernel's kref infrastructure.
Since private IRQs and SPIs are statically allocated, we avoid actually
refcounting them, since they would never be released anyway.
But we take provisions to increase the refcount when an IRQ gets onto a
VCPU list and decrease it when it gets removed. Also this introduces
vgic_put_irq(), which wraps kref_put and hides the release function from
the callers.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

kvm_register_device_ops() can return an error, so lets check its return
value and propagate this up the call chain.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

map_resources is the last initialization step. It is executed on
first VCPU run. At that stage the code checks that userspace has provided
the base addresses for the relevant VGIC regions, which depend on the
type of VGIC that is exposed to the guest.  Also we check if the two
regions overlap.
If the checks succeeded, we register the respective register frames with
the kvm_io_bus framework.

If we emulate a GICv2, the function also forces vgic_init execution if
it has not been executed yet. Also we map the virtual GIC CPU interface
onto the guest's CPU interface.
Signed-off-by: NEric Auger <eric.auger@linaro.org>
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>