- 11 1月, 2016 1 次提交
-
-
由 Heiko Carstens 提交于
Add missing multithreading fields of SYSIB 1.2.2 (Basic-Machine CPUs) to the output of /proc/sysinfo. Also use bitfields for SYSIB 2.2.2 to simplify the C code a bit. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 09 2月, 2015 1 次提交
-
-
由 Ekaterina Tumanova 提交于
A new architecture extends STSI 3.2.2 with UUID and long names. KVM will provide the first implementation. This patch adds the additional data fields (Extended Name and UUID) from the 4KB block returned by the STSI 3.2.2 command and reflect this information in the /proc/sysinfo file accordingly. Signed-off-by: NEkaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 22 1月, 2015 1 次提交
-
-
由 Martin Schwidefsky 提交于
The multi-threading facility is introduced with the z13 processor family. This patch adds code to detect the multi-threading facility. With the facility enabled each core will surface multiple hardware threads to the system. Each hardware threads looks like a normal CPU to the operating system with all its registers and properties. The SCLP interface reports the SMT topology indirectly via the maximum thread id. Each reported CPU in the result of a read-scp-information is a core representing a number of hardware threads. To reflect the reduced CPU capacity if two hardware threads run on a single core the MT utilization counter set is used to normalize the raw cputime obtained by the CPU timer deltas. This scaled cputime is reported via the taskstats interface. The normal /proc/stat numbers are based on the raw cputime and are not affected by the normalization. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 26 9月, 2012 3 次提交
-
-
由 Heiko Carstens 提交于
Change return code handling of the stsi() function: In case function code 0 was specified the return value is the current configuration level (already shifted). That way all the code that actually copied the stsi_0() function can go away. Otherwise the return value is 0 (success) or negative to indicate an error (currently only -EOPNOTSUPP). Also stsi() is no longer an inline function. The function is not performance critical, but every caller would generate an exception table entry for this function. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
The maximum nesting of the cpu topology is evaluated when /proc/sysinfo is the first time read. This happens without a lock and a concurrent reader on a different cpu can see and use an invalid intermediate value. Besides the fact that this race is quite unlikely the worst thing that could happen is that /proc/sysinfo would contain bogus information about the machine's cpu topology. Nevertheless this should be fixed. So move the detection code to the early machine detection code and since now the value is early available use it in the topology code as well. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Add a couple of missing fields that were introduced with z196. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 20 7月, 2012 1 次提交
-
-
由 Heiko Carstens 提交于
Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
- 25 10月, 2010 2 次提交
-
-
由 Heiko Carstens 提交于
Move the topology sysinfo SYSIB definitions to the proper place in asm/sysinfo.h where they should be. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Display machine capacity adjustment indicator and capacity change reason if available in /proc/sysinfo. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 27 2月, 2010 1 次提交
-
-
由 Heiko Carstens 提交于
The size of the field that contains the description block count is only four bits instead of eight bits. The first four bits are reserved but this might change and break. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 26 3月, 2009 1 次提交
-
-
由 Christian Borntraeger 提交于
Currently we use the cpuid (via STIDP instruction) to recognize LPAR, z/VM and KVM. The architecture states, that bit 0-7 of STIDP returns all zero, and if STIDP is executed in a virtual machine, the VM operating system will replace bits 0-7 with FF. KVM should not use FE to distinguish z/VM from KVM for interested guests. The proper way to detect the hypervisor is the STSI (Store System Information) instruction, which return information about the hypervisors via function code 3, selector1=2, selector2=2. This patch changes the detection routine of Linux to use STSI instead of STIDP. This detection is earlier than bootmem, we have to use a static buffer. Since STSI expects a 4kb block (4kb aligned) this patch also changes the init.data alignment for s390. As this section will be freed during boot, this should be no problem. Patch is tested with LPAR, z/VM, KVM on LPAR, and KVM under z/VM. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 25 12月, 2008 1 次提交
-
-
由 Martin Schwidefsky 提交于
Add a new proc interface /proc/service_levels that allows any code to report a relevant service level, e.g. the microcode level of devices, the service level of the hypervisor, etc. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 02 8月, 2008 1 次提交
-
-
由 Martin Schwidefsky 提交于
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 30 4月, 2008 1 次提交
-
-
由 Heiko Carstens 提交于
In order to protect against compile breakage in case the header file gets included twice. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 17 4月, 2008 2 次提交
-
-
由 Martin Schwidefsky 提交于
Add permanent and temporary model capacity and the corresponding capacity value fields for the three capacity identifiers to the output of /proc/sysinfo. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Christian Borntraeger 提交于
drivers/s390/sysinfo.c uses the store system information intruction to query the system about information of the machine, the LPAR and additional hypervisors. KVM has to implement the host part for this instruction. To avoid code duplication, this patch splits the common definitions from sysinfo.c into a separate header file include/asm-s390/sysinfo.h for KVM use. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-