- 23 9月, 2006 1 次提交
-
-
由 Matt Porter 提交于
SigmaTel 9227/8/9 IDs must use the 927x patch. Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 11 7月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
The MacMini board table seems to largely look like any bog-standard Intel 945 board. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 6月, 2006 1 次提交
-
-
由 Takashi Iwai 提交于
Added the support for Intel D965 boards with STAC9227 codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 23 6月, 2006 3 次提交
-
-
由 Sam Revitch 提交于
Add support for some audio quirks of the Apple Mac Mini (early 2006) Signed-off-by: NSam Revitch <samr7@cs.washington.edu> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matt Porter 提交于
Adds support for the 9227/9228/9229 sigmatel hda codecs. Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fixed the master mute switch on VAIO laptops with STAC7661 codec chip. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 4月, 2006 1 次提交
-
-
由 Takashi Iwai 提交于
Added the missing line-in capture on VAIO SZ/FE laptops with STAC 7661 codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 4月, 2006 1 次提交
-
-
由 Ashley Clark 提交于
Modules: HDA Codec driver This patch adds the entry for the 5-stack pin-config for the STAC chip on the Intel D945Pvs board with subdevice id 0x0707. With this patch against 1.0.11rc4 in the linux kernel 2.6.17-rc1, I'm able to successfully output over the optical port and analog ports. Signed-off-by: NAshley Clark <aclark@ghoti.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 3月, 2006 2 次提交
-
-
由 Takashi Iwai 提交于
Fix the re-initialization of unsolicited events at resume of stac92xx codecs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fixed VREF level of Mic inputs on STAC92xx codecs (ALSA bug#1953). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 3月, 2006 3 次提交
-
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver,HDA generic driver - Fix autoconfig speaker/hp detection Now it allows multiple speaker pins (e.g. Dell laptops have such config) - Use speaker or hp pins if no line-outs are available This fixes the silence output on recent Dell laptops with STAC9200 (ALSA bug#1843) - Fix analog/realtek/sigmatel autoconfig parser Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Documentation,HDA Codec driver Add support for VAIO FE550G and SZ110 laptops with Sigmatel codec (7661). The new model 'vaio' is added. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Added the missing entries for Intel 945 boards. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 2月, 2006 4 次提交
-
-
由 Matt Porter 提交于
Modules: HDA Codec driver * Fix init sequence so manually retaskable jacks don't get added to the line_out list. * Update intel mobo config defaults to specify surround outputs as line outs rather than speakers. Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Fix max_channels computation for STAC92xx codecs in the case only HP pin without line-out pins is detected in the default pin config. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matt Porter 提交于
Modules: HDA Codec driver Adds support for the SigmaTel STAC927x HDA codec family. Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matt Porter 提交于
Modules: HDA Codec driver Add SigmaTel HDA support for the Intel D975XBK motherboard. Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 1月, 2006 1 次提交
-
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Added the missing 'Capture Switch' control for Sigmatel STAC92xx codecs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 1月, 2006 5 次提交
-
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver,HDA generic driver - Common labels for input pins - Fix and clean up of Realtek codec parsers Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matt Porter 提交于
Modules: HDA Codec driver - Explictly set pin control as input for all input pins - Fix bug in 922x mixer (no mute on adc0vol) - Remove broken ch_mode control - Add support for jack retasking mixer controls to use rear line and mic as surround outputs - Add board tables to support autodetect and pin config defaults for systems with broken bioses - Add support for several Intel mobos - Add support for DFI mobo with reference boards attached (gets rid of compile time switch to use reference boards) Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver,HDA generic driver - Fix connection list parsing (with ranged flag). - Increase the max number of connections - Introduce widget capabilities cache - Power up/down widgets at init, suspend and resume Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver,HDA generic driver Remove xxx_t typedefs from the HD-Audio codec support codes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 9月, 2005 1 次提交
-
-
由 Takashi Iwai 提交于
AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver Replace kcalloc(1,..) with kzalloc(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 7月, 2005 4 次提交
-
-
由 Matt 提交于
HDA Codec driver Adds support for detecting hp insertion/removal and enable/disable of lineouts based on unsolicited events. Signed-off-by: NMatt <matt@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Use the new kstrdup() function instead of in-house one. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matt 提交于
HDA Codec driver Adds resume support to the SigmaTel HDA patch. Please apply. Signed-off-by: NMatt <matt@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matt 提交于
HDA Codec driver Adds 6/8 channel support to the SigmaTel HDA patch. Please apply. Signed-off-by: NMatt <matt@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 6月, 2005 1 次提交
-
-
由 Matt 提交于
HDA Codec driver Adds SPDIF in/out support to the SigmaTel HDA codecs. Now builds the input mux control element names from the defcfg regs. Signed-off-by: NMatt <matt@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 5月, 2005 1 次提交
-
-
由 Matt 提交于
HDA generic driver,HDA Codec driver Add initial SigmaTel codec support for 9200 and 922x. Note that this hda patch relies on the configuration default registers to be set correctly (normally by BIOS/firmware) in order for it to set up pin widgets properly. There's a test switch in the patch so it will work with the SigmaTel reference boards that are usually plugged into a system that doesn't set the configuration default registers. It supports 2 channel analog out and line/mic in. I plan to add >2 channel support and spdif support shortly. Please apply. Signed-off-by: NMatt <matt@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-