- 04 7月, 2018 3 次提交
-
-
由 Vinicius Costa Gomes 提交于
The ETF (Earliest TxTime First) qdisc uses the information added earlier in this series (the socket option SO_TXTIME and the new role of sk_buff->tstamp) to schedule packets transmission based on absolute time. For some workloads, just bandwidth enforcement is not enough, and precise control of the transmission of packets is necessary. Example: $ tc qdisc replace dev enp2s0 parent root handle 100 mqprio num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 0 $ tc qdisc add dev enp2s0 parent 100:1 etf delta 100000 \ clockid CLOCK_TAI In this example, the Qdisc will provide SW best-effort for the control of the transmission time to the network adapter, the time stamp in the socket will be in reference to the clockid CLOCK_TAI and packets will leave the qdisc "delta" (100000) nanoseconds before its transmission time. The ETF qdisc will buffer packets sorted by their txtime. It will drop packets on enqueue() if their skbuff clockid does not match the clock reference of the Qdisc. Moreover, on dequeue(), a packet will be dropped if it expires while being enqueued. The qdisc also supports the SO_TXTIME deadline mode. For this mode, it will dequeue a packet as soon as possible and change the skb timestamp to 'now' during etf_dequeue(). Note that both the qdisc's and the SO_TXTIME ABIs allow for a clockid to be configured, but it's been decided that usage of CLOCK_TAI should be enforced until we decide to allow for other clockids to be used. The rationale here is that PTP times are usually in the TAI scale, thus no other clocks should be necessary. For now, the qdisc will return EINVAL if any clocks other than CLOCK_TAI are used. Signed-off-by: NJesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com> Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Cree 提交于
Also involved adding a way to run a netfilter hook over a list of packets. Rather than attempting to make netfilter know about lists (which would be a major project in itself) we just let it call the regular okfn (in this case ip_rcv_finish()) for any packets it steals, and have it give us back a list of packets it's synchronously accepted (which normally NF_HOOK would automatically call okfn() on, but we want to be able to potentially pass the list to a listified version of okfn().) The netfilter hooks themselves are indirect calls that still happen per- packet (see nf_hook_entry_hookfn()), but again, changing that can be left for future work. There is potential for out-of-order receives if the netfilter hook ends up synchronously stealing packets, as they will be processed before any accepts earlier in the list. However, it was already possible for an asynchronous accept to cause out-of-order receives, so presumably this is considered OK. Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Cree 提交于
Just calls netif_receive_skb() in a loop. Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2018 2 次提交
-
-
由 Sabrina Dubroca 提交于
Since the addition of GRO for ESP, gro_receive can consume the skb and return -EINPROGRESS. In that case, the lower layer GRO handler cannot touch the skb anymore. Commit 5f114163 ("net: Add a skb_gro_flush_final helper.") converted some of the gro_receive handlers that can lead to ESP's gro_receive so that they wouldn't access the skb when -EINPROGRESS is returned, but missed other spots, mainly in tunneling protocols. This patch finishes the conversion to using skb_gro_flush_final(), and adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and GUE. Fixes: 5f114163 ("net: Add a skb_gro_flush_final helper.") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Reviewed-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amritha Nambiar 提交于
Refactor XPS code to support Tx queue selection based on CPU(s) map or Rx queue(s) map. Signed-off-by: NAmritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2018 2 次提交
-
-
由 David Miller 提交于
Improve the performance of GRO receive by splitting flows into multiple hash chains. Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Miller 提交于
Manage pending per-NAPI GRO packets via list_head. Return an SKB pointer from the GRO receive handlers. When GRO receive handlers return non-NULL, it means that this SKB needs to be completed at this time and removed from the NAPI queue. Several operations are greatly simplified by this transformation, especially timing out the oldest SKB in the list when gro_count exceeds MAX_GRO_SKBS, and napi_gro_flush() which walks the queue in reverse order. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 6月, 2018 3 次提交
-
-
由 Magnus Karlsson 提交于
Added ndo_xsk_async_xmit. This ndo "kicks" the netdev to start to pull userland AF_XDP Tx frames from a NAPI context. Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Björn Töpel 提交于
Extend ndo_bpf with two new commands used for query zero-copy support and register an UMEM to a queue_id of a netdev. Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Jesper Dangaard Brouer 提交于
All drivers are cleaned up and no references to ndo_xdp_flush are left in drivers, it is time to remove the net_device_ops operation ndo_xdp_flush. Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 03 6月, 2018 1 次提交
-
-
由 Jesper Dangaard Brouer 提交于
This patch only change the API and reject any use of flags. This is an intermediate step that allows us to implement the flush flag operation later, for each individual driver in a separate patch. The plan is to implement flush operation via XDP_XMIT_FLUSH flag and then remove XDP_XMIT_FLAGS_NONE when done. Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
- 29 5月, 2018 2 次提交
-
-
由 Jakub Kicinski 提交于
mq offload is trivial, we just need to let the device know that the root qdisc is mq. Alternative approach would be to export qdisc_lookup() and make drivers check the root type themselves, but notification via ndo_setup_tc is more in line with other qdiscs. Note that mq doesn't hold any stats on it's own, it just adds up stats of its children. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sridhar Samudrala 提交于
The failover module provides a generic interface for paravirtual drivers to register a netdev and a set of ops with a failover instance. The ops are used as event handlers that get called to handle netdev register/ unregister/link change/name change events on slave pci ethernet devices with the same mac address as the failover netdev. This enables paravirtual drivers to use a VF as an accelerated low latency datapath. It also allows migration of VMs with direct attached VFs by failing over to the paravirtual datapath when the VF is unplugged. Signed-off-by: NSridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2018 2 次提交
-
-
由 John Hurley 提交于
LAG upper event notifiers contain the tx type used by the LAG device. Extend this to also include the hash policy used for tx types that utilize hashing. Signed-off-by: NJohn Hurley <john.hurley@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
This patch change the API for ndo_xdp_xmit to support bulking xdp_frames. When kernel is compiled with CONFIG_RETPOLINE, XDP sees a huge slowdown. Most of the slowdown is caused by DMA API indirect function calls, but also the net_device->ndo_xdp_xmit() call. Benchmarked patch with CONFIG_RETPOLINE, using xdp_redirect_map with single flow/core test (CPU E5-1650 v4 @ 3.60GHz), showed performance improved: for driver ixgbe: 6,042,682 pps -> 6,853,768 pps = +811,086 pps for driver i40e : 6,187,169 pps -> 6,724,519 pps = +537,350 pps With frames avail as a bulk inside the driver ndo_xdp_xmit call, further optimizations are possible, like bulk DMA-mapping for TX. Testing without CONFIG_RETPOLINE show the same performance for physical NIC drivers. The virtual NIC driver tun sees a huge performance boost, as it can avoid doing per frame producer locking, but instead amortize the locking cost over the bulk. V2: Fix compile errors reported by kbuild test robot <lkp@intel.com> V4: Isolated ndo, driver changes and callers. Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
- 04 5月, 2018 1 次提交
-
-
由 Magnus Karlsson 提交于
The new dev_direct_xmit will be used by AF_XDP in later commits. Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
- 02 5月, 2018 1 次提交
-
-
由 Florian Fainelli 提交于
We do not require this inline function to be used in multiple different locations, just inline it where it gets used in register_netdevice(). Suggested-by: NDavid Miller <davem@davemloft.net> Suggested-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 5月, 2018 1 次提交
-
-
由 Ilya Lesokhin 提交于
Add new netdev ops to add and delete tls context Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com> Signed-off-by: NBoris Pismenny <borisp@mellanox.com> Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 4月, 2018 2 次提交
-
-
由 Florian Fainelli 提交于
We have about 53 netdev_features_t bits defined and counting, add a build time check to catch when an u64 type will not be enough and we will have to convert that to a bitmap. This is done in register_netdevice() for convenience. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
I am dropping the export of __skb_tx_hash as after my patches nobody is using it outside of the net/core/dev.c file. In addition I am renaming and repurposing it to just be a static declaration of skb_tx_hash since that was the only user for it at this point. By doing this the compiler can inline it into __netdev_pick_tx as that will improve performance. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 4月, 2018 1 次提交
-
-
由 Willem de Bruijn 提交于
Virtual devices such as tunnels and bonding can handle large packets. Only segment packets when reaching a physical or loopback device. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2018 1 次提交
-
-
由 Jesper Dangaard Brouer 提交于
Changing API ndo_xdp_xmit to take a struct xdp_frame instead of struct xdp_buff. This brings xdp_return_frame and ndp_xdp_xmit in sync. This builds towards changing the API further to become a bulk API, because xdp_buff is not a queue-able object while xdp_frame is. V4: Adjust for commit 59655a5b ("tuntap: XDP_TX can use native XDP") V7: Adjust for commit d9314c47 ("i40e: add support for XDP_REDIRECT") Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2018 2 次提交
-
-
由 Russell King 提交于
Provide a pointer to the SFP bus in struct net_device, so that the ethtool module EEPROM methods can access the SFP directly, rather than needing every user to provide a hook for it. Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gal Pressman 提交于
NETIF_F_HW_VLAN_[CS]TAG_FILTER features require more than just a bit flip in dev->features in order to keep the driver in a consistent state. These features notify the driver of each added/removed vlan, but toggling of vlan-filter does not notify the driver accordingly for each of the existing vlans. This patch implements a similar solution to NETIF_F_RX_UDP_TUNNEL_PORT behavior (which notifies the driver about UDP ports in the same manner that vids are reported). Each toggling of the features propagates to the 8021q module, which iterates over the vlans and call add/kill ndo accordingly. Signed-off-by: NGal Pressman <galp@mellanox.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2018 2 次提交
-
-
由 Kirill Tkhai 提交于
Last user is gone after bdf5bd7f "rds: tcp: remove register_netdevice_notifier infrastructure.", so we can remove this netdevice command. This allows to delete rtnl_lock() in netdev_run_todo(), which is hot path for net namespace unregistration. dev_change_net_namespace() and netdev_wait_allrefs() have rcu_barrier() before NETDEV_UNREGISTER_FINAL call, and the source commits say they were introduced to delemit the call with NETDEV_UNREGISTER, but this patch leaves them on the places, since they require additional analysis, whether we need in them for something else. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
This patch is preparation to drop NETDEV_UNREGISTER_FINAL. Since the cmd is used in usnic_ib_netdev_event_to_string() to get cmd name, after plain removing NETDEV_UNREGISTER_FINAL from everywhere, we'd have holes in event2str[] in this function. Instead of that, let's make NETDEV_XXX commands names available for everyone, and to define netdev_cmd_to_name() in the way we won't have to shaffle names after their numbers are changed. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 3月, 2018 1 次提交
-
-
由 Arnd Bergmann 提交于
The new variable is only available when CONFIG_SYSCTL is enabled, otherwise we get a link error: net/ipv4/ip_tunnel.o: In function `ip_tunnel_init_net': ip_tunnel.c:(.text+0x278b): undefined reference to `sysctl_fb_tunnels_only_for_init_net' net/ipv6/sit.o: In function `sit_init_net': sit.c:(.init.text+0x4c): undefined reference to `sysctl_fb_tunnels_only_for_init_net' net/ipv6/ip6_tunnel.o: In function `ip6_tnl_init_net': ip6_tunnel.c:(.init.text+0x39): undefined reference to `sysctl_fb_tunnels_only_for_init_net' This adds an extra condition, keeping the traditional behavior when CONFIG_SYSCTL is disabled. Fixes: 79134e6c ("net: do not create fallback tunnels for non-default namespaces") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2018 2 次提交
-
-
由 Paolo Abeni 提交于
Some network devices - notably ipvlan slave - are not compatible with any kind of rx_handler. Currently the hook can be installed but any configuration (bridge, bond, macsec, ...) is nonfunctional. This change allocates a priv_flag bit to mark such devices and explicitly forbid installing a rx_handler if such bit is set. The new bit is used by ipvlan slave device. Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
fallback tunnels (like tunl0, gre0, gretap0, erspan0, sit0, ip6tnl0, ip6gre0) are automatically created when the corresponding module is loaded. These tunnels are also automatically created when a new network namespace is created, at a great cost. In many cases, netns are used for isolation purposes, and these extra network devices are a waste of resources. We are using thousands of netns per host, and hit the netns creation/delete bottleneck a lot. (Many thanks to Kirill for recent work on this) Add a new sysctl so that we can opt-out from this automatic creation. Note that these tunnels are still created for the initial namespace, to be the least intrusive for typical setups. Tested: lpk43:~# cat add_del_unshare.sh for i in `seq 1 40` do (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) & done wait lpk43:~# echo 0 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m37.521s user 0m0.886s sys 7m7.084s lpk43:~# echo 1 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m4.761s user 0m0.851s sys 1m8.343s lpk43:~# Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2018 1 次提交
-
-
由 Paolo Abeni 提交于
the ipvlan device driver defines and uses 2 bits inside the priv_flags net_device field. Such bits and the related helper are used only inside the ipvlan device driver, and the core networking does not need to be aware of them. This change moves netif_is_ipvlan* helper in the ipvlan driver and re-implement them looking for ipvlan specific symbols instead of using priv_flags. Overall this frees two bits inside priv_flags - and move the following ones to avoid gaps - without any intended functional change. Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2018 3 次提交
-
-
由 David Ahern 提交于
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 2月, 2018 1 次提交
-
-
由 Daniel Borkmann 提交于
syzkaller was able to generate the following XDP program ... (18) r0 = 0x0 (61) r5 = *(u32 *)(r1 +12) (04) (u32) r0 += (u32) 0 (95) exit ... and trigger a NULL pointer dereference in ___bpf_prog_run() via bpf_prog_test_run_xdp() where this was attempted to run. Reason is that recent xdp_rxq_info addition to XDP programs updated all drivers, but not bpf_prog_test_run_xdp(), where xdp_buff is set up. Thus when context rewriter does the deref on the netdev it's NULL at runtime. Fix it by using xdp_rxq from loopback dev. __netif_get_rx_queue() helper can also be reused in various other locations later on. Fixes: 02dd3291 ("bpf: finally expose xdp_rxq_info to XDP bpf-programs") Reported-by: syzbot+1eb094057b338eb1fc00@syzkaller.appspotmail.com Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
- 30 1月, 2018 1 次提交
-
-
由 Cong Wang 提交于
This patch promotes the local change_tx_queue_len() to a core helper function, dev_change_tx_queue_len(), so that rtnetlink and net-sysfs could share the code. This also prepares for the following patch. Note, the -EFAULT in the original code doesn't make sense, we should propagate the errno from notifiers. Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 1月, 2018 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Only two of dev_ioctl() callers may pass SIOCGIFCONF to it. Separating that codepath from the rest of dev_ioctl() allows both to simplify dev_ioctl() itself (all other cases work with struct ifreq *) *and* seriously simplify the compat side of that beast: all it takes is passing to inet_gifconf() an extra argument - the size of individual records (sizeof(struct ifreq) or sizeof(struct compat_ifreq)). With dev_ifconf() called directly from sock_do_ioctl()/compat_dev_ifconf() that's easy to arrange. As the result, compat side of SIOCGIFCONF doesn't need any allocations, copy_in_user() back and forth, etc. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 24 1月, 2018 1 次提交
-
-
由 Florian Fainelli 提交于
Fix the documentation warning: include/linux/netdevice.h:1939: warning: Excess struct member 'carrier_changes' description in 'net_device' Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Fixes: b2d3bcfa ("net: core: Expose number of link up/down transitions") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 1月, 2018 1 次提交
-
-
由 David Decotigny 提交于
Expose the number of times the link has been going UP or DOWN, and update the "carrier_changes" counter to be the sum of these two events. While at it, also update the sysfs-class-net documentation to cover: carrier_changes (3.15), carrier_up_count (4.16) and carrier_down_count (4.16) Signed-off-by: NDavid Decotigny <decot@googlers.com> [Florian: * rebase * add documentation * merge carrier_changes with up/down counters] Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2018 1 次提交
-
-
由 Yossef Efraim 提交于
This patch adds ESN support to IPsec device offload. Adding new xfrm device operation to synchronize device ESN. Signed-off-by: NYossef Efraim <yossefe@mellanox.com> Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-