commit 688f7d8c ("clk: exynos5250: Fix divider values for
sclk_mmc{0,1,2,3}") incorrectly sets the divider for sclk_mmc{0,1,2,3}
to fix the wrong clock value. Though this fixed issue with Arndale,
it created regressions for other boards like Snow.

On Exynos5250, sclk_mmc<n> is generated like below (as per the clock
names in drivers/clk/samsung/clk-exynos5250.c)

mout_group1_p ==> mout_mmc<n> ==>
		div_mmc<n> ==> div_mmc_pre<n> => sclk_mmc<n>

Earlier div_mmc<n> was set as the parent for sclk_mmc<n>, hence
div_mmc_pre<n> was not getting referred in kernel code and depending
on its value set during preboot, sclk_mmc<n> value was different for
various boards.

Setting the correct clock generation path should fix the issues
reported in above referenced commit. The changes committed during the
earlier patch has also been reverted here.
Reported-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Tested-by: NDoug Anderson <dianders@chromium.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

In legacy setup, sclk_mmc{0,1,2,3} used PRE_RATIO bit-field (8-bit wide)
instead of RATIO bit-field (4-bit wide) for dividing clock rate.

With current common clock setup, we are using RATIO bit-field which
is creating FIFO read errors while accessing eMMC. Changing over to
use PRE_RATIO bit-field fixes this issue.

dwmmc_exynos 12200000.dwmmc0: data FIFO error (status=00008020)
mmcblk0: error -5 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0
end_request: I/O error, dev mmcblk0, sector 1
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
CC: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds clock indexes for ACLK_DIV0, ACLK_DIV1,
ACLK_400_MCUISP, ACLK_MCUISP_DIV0, ACLK_MCUISP_DIV1,
DIVACLK_400_MCUISP and DIVACLK_200 so these clocks are
available to the consumers (Exynos4x12 FIMC-IS subsystem).
While at it, indentation of the mux clocks table is
corrected.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Fixes the below compilation error during non-dt build.
drivers/clk/samsung/clk.c: In function 'samsung_clk_of_register_fixed_ext':
drivers/clk/samsung/clk.c:252:2: error: implicit declaration of function 'for_each_matching_node_and_match' [-Werror=implicit-function-declaration]
drivers/clk/samsung/clk.c:252:60: error: expected ';' before '{' token
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add gate clocks for fimd, mie, dsim, dp, mixer and hdmi.
Register it to common clock framework.
Signed-off-by: NLeela Krishna Amudala <l.krishna@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch extends suspend/resume support for SoC-specific registers to
handle differences in register sets on particular SoCs.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds missing clock control registers to the list of registers
that should be saved across system suspend.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This register is present on all Exynos4 SoCs and so the prefix is
misleading.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This definition is specific for Exynos4210 (which has another location
than the same register on Exynos4x12 SoCs) and so needs appropriate
prefix.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds E4210 prefix to all registers related to LCD1 clock
domain, because they are present only on Exynos4210.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Current clock save list is shared for all Exynos4 SoCs, so it must
contain only registers present in all supported SoCs, because accessing
unavailable registers might have undefined effect.

This patch removes registers specific for particular SoCs from shared
save list, as they should be supported by separate SoC-specific lists.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

There are definitions of SRC_MASK_PERIL0 and SRC_MASK_PERIL1 registers,
but they are not used for clock definitions. This patch modifies related
clock definitions to use defined macros instead of numeric offsets.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds preprocessor definitions of EPLL and VPLL registers and
replaces all occurences of offsets of related registers with new
definitions.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds missing mout_sata that is a parent of div_sata clock.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The patch adds missing clocks to TOP and ISP clock domains.
It also adds clock gates for ISP sub-blocks.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds clocks needed for G3D block present on Exynos 4 SoCs.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds several gate and mux clocks related to camera and ISP
blocks.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch enables clock lookup registration for mout_core clock used in
Exynos4210 cpufreq driver.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Unimplemented clock operations should be simply omitted instead of returning
error values.

This patch removes unimplemented PLL operations to fix problems caused
by returning error code in round_rate callback.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch exports clocks used by Exynos cpufreq drivers to allow lookup
using device tree. (Support to cpufreq drivers will be added in further
patches.)
Signed-off-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The sclk_dac and sclk_mixer clocks are not present on Exynos4x12.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This clock is used by PCM interface 0.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This clock is a parent of mout_spdif and sclk_pcm0.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds missing output of mux MIPIHSI which is needed for
div_mipihsi clock.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Many clock muxes of Exynos 4x12 uses mout_mpll_user_* clocks instead of
sclk_mpll as one of their parents.

This patch moves such clocks from common array into SoC-specific arrays
and adjusts their parent lists respectively.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This clock must be exported to allow lookup using device tree.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The current code adds aliases, if necessary, directly when adding
the clock, limiting the number of possible aliases to one.

Some platforms need more than one alias, like the hsmmc pclocks on
s3c2416 which need a "hsmmc" and "mmc_busclk.0" alias for the s3c-
sdhci driver.

Therefore add the possibility to separately add clock aliases for
previously created clocks.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This is needed to allow looking up previous created clocks when
adding separate aliases to them.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The clock_init function checked for a dt node, returning immediately
for non-dt machines. This let to the suspend init never being reached
on those non-DT machines.

So fix this by moving the pm init code above the check.
Signed-off-by: NHeiko Stueber <heiko@sntech.de>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

On some Samsung platforms divider clocks only use specific divider
combinations like the armdiv on s3c2443 and s3c2416. For these
usecases the generic divider clock already provides the option of
providing a lookup table mapping register values to divider values.

Therefore add a new field to samsung_div_clock and if filled with a
table, use clk_register_divider_table instead of clk_register_divider
to register a divider clock
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The Exynos5440 clocks are statically listed and registered using the
Samsung specific common clock helper functions.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The Exynos5250 clocks are statically listed and registered using the
Samsung specific common clock helper functions. Both device tree based
clock lookup and clkdev based clock lookups are supported.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The Exynos4 clocks are statically listed and registered using the
Samsung specific common clock helper functions. Both device tree
based clock lookup and clkdev based clock lookups are supported.
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Tested-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

There are several types of pll clocks used in Samsung SoC's and these
pll clocks can be represented as Samsung specific pll clock types and
registered with the common clock framework. Add support for pll35xx,
pll36xx, pll45xx, pll46xx and pll2550x clock types and helper functions
to register them.
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Tested-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

All Samsung platforms include different types of clock including
fixed-rate, mux, divider and gate clock types. There are typically
hundreds of such clocks on each of the Samsung platforms. To enable
Samsung platforms to register these clocks using the common clock
framework, a bunch of utility functions are introduced here which
simplify the clock registration process. The clocks are usually
statically instantiated and registered with common clock framework.
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Tested-by: NTomasz Figa <t.figa@samsung.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>