Just reinitialize the shader content on resume instead.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

The IB pool is in gart memory, so it is completely
superfluous to unpin / repin it on suspend / resume.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

GPU reset need to be exclusive, one happening at a time. For this
add a rw semaphore so that any path that trigger GPU activities
have to take the semaphore as a reader thus allowing concurency.

The GPU reset path take the semaphore as a writer ensuring that
no concurrent reset take place.

v2: init rw semaphore
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of returning the error handle it directly
and while at it fix the comments about the ring lock.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Try to remove or replace the cs_mutex with a
vm_mutex where it is still needed.

v2: fix locking order
v3: rebased on drm-next
Signed-off-by: NChristian König <deathsimple@vodafone.de>

So we can skip the locking. Also renames sw_int to
ring_int, cause that better matches its purpose.
Signed-off-by: NChristian Koenig <christian.koenig@amd.com>

1. It is really dangerous to have more than one
   spinlock protecting the same information.

2. radeon_irq_set sometimes wasn't called with lock
   protection, so it can happen that more than one
   CPU would tamper with the irq regs at the same
   time.

3. The pm.gui_idle variable was assuming that the 3D
   engine wasn't becoming idle between testing the
   register and setting the variable. So just remove
   it and test the register directly.

v2: Also handle the hpd irq code the same way.
v3: Rename hpd parameter for clarification.
Signed-off-by: NChristian Koenig <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

The spinlock was actually there to protect the
rptr, but rptr was read outside of the locked area.

Also we don't really need a spinlock here, an
atomic should to quite fine since we only need to
prevent it from being reentrant.

v2: Keep the spinlock....
v3: Back to an atomic again after finding & fixing the real bug.
Signed-off-by: NChristian Koenig <christian.koenig@amd.com>

Signed-off-by: NChristian Koenig <christian.koenig@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

It is a rw_semaphore now and only write locked
while changing the clock. Also the lock is renamed
to better reflect what it is protecting.

v2: Keep the ttm_vm_ops on IGPs
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

Move inter ring syncing with semaphores into the
existing ring allocations, with that we need to
lock the ring mutex only once.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

v2: BUG_ON not matching rings.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

It is completely unnecessary to create fences
before they are emitted, so remove it and a bunch
of checks if fences are emitted or not.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

- Properly set up the RBs
- Properly set up the SPI
- Properly set up gb_addr_config

This should fix rendering issues on certain cards.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Tiling group size is always 256bits on r6xx/r7xx/r8xx/9xx. Also fix and
simplify render backend map. This now properly sets up the backend map
on r6xx-9xx which should improve 3D performance.

Vadim benchmarked also:
Some benchmarks on juniper (5750), fullscreen 1920x1080,
first result - kernel 3.4.0+ (fb21affa), second - with these patches:

Lightsmark:   91 fps => 123 fps    +35%
Doom3:        74 fps => 101 fps    +36%
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is the same as the nouveau code pretty much.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Just move its only caller into the same file as it and make it static.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This optmizes calls, registers reads and assignments.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

No need to malloc it any more.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If we don't store local data into global variables
it isn't necessary to lock anything.

v2: rebased on new SA interface
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

It never really belonged there in the first place.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

It isn't necessary any more and the suballocator seems to perform
even better.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Directly use the suballocator to get small chunks of memory.
It's equally fast and doesn't crash when we encounter a GPU reset.

v2: rebased on new SA interface.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

A startover with a new idea for a multiple ring allocator.
Should perform as well as a normal ring allocator as long
as only one ring does somthing, but falls back to a more
complex algorithm if more complex things start to happen.

We store the last allocated bo in last, we always try to allocate
after the last allocated bo. Principle is that in a linear GPU ring
progression was is after last is the oldest bo we allocated and thus
the first one that should no longer be in use by the GPU.

If it's not the case we skip over the bo after last to the closest
done bo if such one exist. If none exist and we are not asked to
block we report failure to allocate.

If we are asked to block we wait on all the oldest fence of all
rings. We just wait for any of those fence to complete.

v2: We need to be able to let hole point to the list_head, otherwise
    try free will never free the first allocation of the list. Also
    stop calling radeon_fence_signalled more than necessary.

v3: Don't free allocations without considering them as a hole,
    otherwise we might lose holes. Also return ENOMEM instead of ENOENT
    when running out of fences to wait for. Limit the number of holes
    we try for each ring to 3.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use one wait queue for all rings. When one ring progress, other
likely does to and we are not expecting to have a lot of waiter
anyway.

Also add a fence_wait_any that will wait until the first fence
in the fence array (one fence per ring) is signaled. This allow
to wait on all rings.

v2: some minor cleanups and improvements.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Define the interface without modifying the allocation
algorithm in any way.

v2: rebase on top of fence new uint64 patch
v3: add ring to debugfs output
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Allocating and freeing it seperately.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Instead of offset + size keep start and end offset directly.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Make the suballocator self containing to locking.

v2: split the bugfix into a seperate patch.
v3: remove some unreleated changes.
Sig-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some callers illegal called fence_wait_next/empty
while holding the ring emission mutex. So don't
relock the mutex in that cases, and move the actual
locking into the fence code.

v2: Don't try to unlock the mutex if it isn't locked.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Using 64bits fence sequence we can directly compare sequence
number to know if a fence is signaled or not. Thus the fence
list became useless, so does the fence lock that mainly
protected the fence list.

Things like ring.ready are no longer behind a lock, this should
be ok as ring.ready is initialized once and will only change
when facing lockup. Worst case is that we return an -EBUSY just
after a successfull GPU reset, or we go into wait state instead
of returning -EBUSY (thus delaying reporting -EBUSY to fence
wait caller).

v2: Remove left over comment, force using writeback on cayman and
    newer, thus not having to suffer from possibly scratch reg
    exhaustion
v3: Rebase on top of change to uint64 fence patch
v4: Change DCE5 test to force write back on cayman and newer but
    also any APU such as PALM or SUMO family
v5: Rebase on top of new uint64 fence patch
v6: Just break if seq doesn't change any more. Use radeon_fence
    prefix for all function names. Even if it's now highly optimized,
    try avoiding polling to often.
v7: We should never poll the last_seq from the hardware without
    waking the sleeping threads, otherwise we might lose events.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This convert fence to use uint64_t sequence number intention is
to use the fact that uin64_t is big enough that we don't need to
care about wrap around.

Tested with and without writeback using 0xFFFFF000 as initial
fence sequence and thus allowing to test the wrap around from
32bits to 64bits.

v2: Add comment about possible race btw CPU & GPU, add comment
    stressing that we need 2 dword aligned for R600_WB_EVENT_OFFSET
    Read fence sequenc in reverse order of GPU write them so we
    mitigate the race btw CPU and GPU.

v3: Drop the need for ring to emit the 64bits fence, and just have
    each ring emit the lower 32bits of the fence sequence. We
    handle the wrap over 32bits in fence_process.

v4: Just a small optimization: Don't reread the last_seq value
    if loop restarts, since we already know its value anyway.
    Also start at zero not one for seq value and use pre instead
    of post increment in emmit, otherwise wait_empty will deadlock.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

A single global mutex for ring submissions seems sufficient.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Nothing chipset or ring specific with it,
so also move it to radon_ring.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Don't hard code the 10 seconds timeout. Compute jobs
can run much longer.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

It isn't chipset specific, so it makes no sense
to have that inside r100.c.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Rings need to lock in order, otherwise
the ring subsystem can deadlock.

v2: fix error handling and number of locked doublewords.
v3: stop creating unneeded semaphores.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

It's never used and so practically superfluous.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>