It will help future code if this function knows something about of the context
of the display setup object is being pinned for.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This gets us out of our init code and out to userspace quite a bit
faster, but does open us up to some bugs given the state of our init
time locking.

v2: switch to async_schedule (Chris)
    check with lockdep, seems happy (Jesse)
    move hotplug enable flag set to fbdev_initial_config (Jesse)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: Rebase on top of the dev_priv->enable_hotplug_processing
removal.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In the move over to use BIOS connector configs, we lost the ability to
force a specific set of connectors on or off.  Try to remedy that by
dropping back to the old behavior if we detect a hard coded connector
config that tries to enable a connector (disabling is easy!).

Based on earlier patches by Jesse Barnes.

v2: Remove Jesse's patch
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Rather than take and release the console_lock() around a non-existent
DRM_I915_FBDEV, move the lock acquisation into the callee where it will
be compiled out by the config option entirely. This includes moving the
deferred fb_set_suspend() dance and encapsulating it entirely within
intel_fbdev.c.

v2: Use an integral work item so that we can explicitly flush the work
upon suspend/unload.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Add the flush_work in fbdev_fini per the mailing list
discussion. And s/BUG_ON/WARN_ON/ because.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This chunk was no longer required from what I can see, or
at least it is doing the wrong thing, as I confused
intel_connector->encoder and connector->encoder. Drop it
for now, to remove the warnings at bootup.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds DP 1.2 MST support on Haswell systems.

Notes:
a) this reworks irq handling for DP MST ports, so that we can
avoid the mode config locking in the current hpd handlers, as
we need to process up/down msgs at a better time.

Changes since v0.1:
use PORT_PCH_HOTPLUG to detect short vs long pulses
add a workqueue to deal with digital events as they can get blocked on the
main workqueue beyong mode_config mutex
fix a bunch of modeset checker warnings
acks irqs in the driver
cleanup the MST encoders

Changes since v0.2:
check irq status again in work handler
move around bring up and tear down to fix DPMS on/off
use path properties.

Changes since v0.3:
updates for mst apis
more state checker fixes
irq handling improvements
fbcon handling support
improved reference counting of link - fixes redocking.

Changes since v0.4:
handle gpu reset hpd reinit without oopsing
check link status on HPD irqs
fix suspend/resume

Changes since v0.5:
use proper functions to get max link/lane counts
fix another checker backtrace - due to connectors disappearing.
set output type in more places fro, unknown->displayport
don't talk to devices if no HPD asserted
check mst on short irqs only
check link status properly
rebase onto prepping irq changes.
drop unsued force_act

Changes since v0.6:
cleanup unused struct entry.

[airlied: fix some sparse warnings].
Reviewed-by: NTodd Previte <tprevite@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

To implement hotplug detection in a race-free manner, drivers must call
drm_kms_helper_poll_init() before hotplug events can be triggered. Such
events can be triggered right after any of the encoders or connectors
are initialized. At the same time, if the drm_fb_helper_hotplug_event()
helper is used by a driver, then the poll helper requires some parts of
the FB helper to be initialized to prevent a crash.

At the same time, drm_fb_helper_init() requires information that is not
necessarily available at such an early stage (number of CRTCs and
connectors), so it cannot be used yet.

Add a new helper, drm_fb_helper_prepare(), that initializes the bare
minimum needed to allow drm_kms_helper_poll_init() to execute and any
subsequent hotplug events to be processed properly.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

There's no need for this to be modifiable. Make it const so that it can
be put into the .rodata section.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

use mm.h definition

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

X could end up putting the fbcon fb into other domains, e.g.
for smooth take-overs. Also we want this for accurate frontbuffer
tracking: The set_config is an implicit flush and will re-enable
psr and similar features, so we need to bring the bo back into
the gtt domain.

v2: Add FIXME comment about fbcon locking fun in atomic context,
requested by Chris.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

pipe_name() returns an ascii character.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

All drm_fb_helper_restore_fbdev_mode() call sites, save one, do the same
locking.  Simplify this into drm_fb_helper_restore_fbdev_mode_unlocked().
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Generated using semantic patches:

@@
expression E;
@@

- drm_get_connector_name(&E)
+ E.name

@@
expression E;
@@

- drm_get_connector_name(E)
+ E->name

v2: Turn drm_get_connector_name(&E) into E.name instead of &(E)->name.
Acked-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This matches the algorithm used by earlier kernels when selecting the
mode for the fbcon. And only if there is no modes at all, do we fall
back to using the BIOS configuration. Seamless transition is still
preserved (from the BIOS configuration to ours) so long as the BIOS has
also chosen what we hope is the native configuration.
Reported-by: NKnut Petersen <Knut_Petersen@t-online.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78655Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: NKnut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
[Jani: applied Chris' "Please imagine that I wrote this correctly."]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

During initial probing of the modes to assign to the fbdev console, we
use the CRTC and connector ids. These are much harder for us to
understand than if we used their actual names (or pipe in the CRTC
case). Similarly, we want to manually print the mode size rather than
rely on mode->name being set.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Patch done using the following semantic patch (thanks Daniel for the
help!)

  @@
  iterator name list_for_each_entry;
  iterator name for_each_crtc;
  struct drm_crtc * crtc;
  struct drm_device * dev;
  @@
  -list_for_each_entry(crtc,&dev->mode_config.crtc_list, head) {
  +for_each_crtc(dev,crtc) {
  	...
  }

Followed by a couple of fixups by hand (that spatch doesn't match the
cases where list_for_each_entry() is not followed by a set of '{', '}',
but I couldn't figure out a way to leave the '{' out of the iterator
match).
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If the inherited BIOS framebuffer is smaller than the mode selected for
fbdev, then if we continue to use it then we cause display corruption as
we do not setup the panel fitter to upscale.

Regression from commit d978ef14
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Fri Mar 7 08:57:51 2014 -0800

    drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12

v2: Add a debug message to track the discard of the BIOS fb.
v3: Ville pointed out the difference between ref/unref
Reported-by: NKnut Petersen <Knut_Petersen@t-online.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77767Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The computation of required framebuffer size in

commit d978ef14
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Fri Mar 7 08:57:51 2014 -0800

    drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12

is too optimistic, and would rely on the invariant fb being
reconstructed to exactly fit each pipe (and probably ignore hardware
limits). Instead, we want to compute the upper bound on what the display
engine will access and ensure that is within the inherited framebuffer.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

By stuffing the fb allocation into the crtc, we get mode set lifetime
refcounting for free, but have to handle the initial pin & fence
slightly differently.  It also means we can move the shared fb handling
into the core rather than leaving it out in the fbdev code.

v2: null out crtc->fb on error (Daniel)
    take fbdev fb ref and remove unused error path (Daniel)
Requested-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Retrieve current framebuffer config info from the regs and create an fb
object for the buffer the BIOS or boot loader left us.  This should
allow for smooth transitions to userspace apps once we finish the
initial configuration construction.

v2: check for non-native modes and adjust (Jesse)
    fixup aperture and cmap frees (Imre)
    use unlocked unref if init_bios fails (Jesse)
    fix curly brace around DSPADDR check (Imre)
    comment failure path for pin_and_fence (Imre)
v3: fixup fixup of aperture frees (Chris)
v4: update to current bits (locking & pin_and_fence hack) (Jesse)
v5: move fb config fetch to display code (Jesse)
    re-order hw state readout on initial load to suit fb inherit (Jesse)
    re-add pin_and_fence in fbdev code to make sure we refcount properly (Je
v6: rename to plane_config (Daniel)
    check for valid object when initializing BIOS fb (Jesse)
    split from plane_config readout and other display changes (Jesse)
    drop use_bios_fb option (Chris)
    update comments (Jesse)
    rework fbdev_init_bios for clarity (Jesse)
    drop fb obj ref under lock (Chris)
v7: use fb object from plane_config instead (Ville)
    take ref on fb object (Jesse)
v8: put under i915_fastboot option (Jesse)
    fix fb ptr checking (Jesse)
    inform drm_fb_helper if we fail to enable a connector (Jesse)
    drop unnecessary enabled[] modifications in failure cases (Chris)
    split from BIOS connector config readout (Daniel)
    don't memset the fb buffer if preallocated (Chris)
    alloc ifbdev up front and pass to init_bios (Chris)
    check for bad ifbdev in restore_mode too (Chris)
v9: fix up !fastboot bpp setting (Jesse)
    fix up !fastboot helper alloc (Jesse)
    make sure BIOS fb is sufficient for biggest active pipe (Jesse)
v10:fix up size calculation for proposed fbs (Chris)
    go back to two pass pipe fb assignment (Chris)
    add warning for active pipes w/o fbs (Chris)
    clean up num_pipes checks in fbdev_init and fbdev_restore_mode (Chris)
    move i915.fastboot into fbdev_init (Chris)
v11:make BIOS connector config usage unconditional (Daniel)
v12:fix up fb vs pipe size checking (Chris)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Both Ville and QA rather immediately complained that with the new
initial_config logic from Jesse not all outputs get enabled. Since the
fbdev emulation pretty much tries to always enable as many outputs as
possible (it even has hotplug handling and all that) fall back if more
outputs could have been enabled.

v2: Fix up my confusion about what enabled means - it's passed from
the fbdev helper, we need to check for a non-zero connector->encoder
link. Spotted by Ville.

v3: Add some debug output as requested by Jesse for debugging fallback
issues.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75552Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It started as a simple check whether anything is lit up, but now is't
used to driver the general fallback logic to the default output
configuration selector in the helper library. So rename it for more
clarity.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In the move over to use BIOS connector configs, we lost the ability to
force a specific set of connectors on or off.  Try to remedy that by
dropping back to the old behavior if we detect a hard coded connector
config.

v2: don't deref connector state for disabled connectors (Jesse)
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It can be corrected later and may be what was actually desired, but
generally isn't, so if we find nothing is enabled, let the core DRM fb
helper figure something out.

v2: free the array too (Jesse)

Note that this also undoes any changes in case we bail out due to hw
cloning.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The BIOS or boot loader will generally create an initial display
configuration for us that includes some set of active pipes and
displays.  This routine tries to figure out which pipes and connectors
are active and stuffs them into the crtcs and modes array given to us by
the drm_fb_helper code.

The overall sequence is:
  intel_fbdev_init - from driver load
    intel_fbdev_init_bios - initialize the intel_fbdev using BIOS data
    drm_fb_helper_init - build fb helper structs
    drm_fb_helper_single_add_all_connectors - more fb helper structs
  intel_fbdev_initial_config - apply the config
    drm_fb_helper_initial_config - call ->probe then register_framebuffer()
        drm_setup_crtcs - build crtc config for fbdev
          intel_fb_initial_config - find active connectors etc
        drm_fb_helper_single_fb_probe - set up fbdev
          intelfb_create - re-use or alloc fb, build out fbdev structs

v2: use BIOS connector config unconditionally if possible (Daniel)
    check for crtc cloning and reject (Daniel)
    fix up comments (Daniel)
v3: use command line args and preferred modes first (Ville)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Re-add the WARN_ON for a missing encoder crtc - the state
sanitizer should take care of this. And spell-ocd the comments.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So far during driver unload we called drm_framebuffer_cleanup() for the
fbdev fb, which only removes the fb from the drm fb list regardless of
its reference count, but leaves the fb bound on an active crtc. Since
the fb's backing storage was freed this could mean we scan some random
memory content out afterwards. It's not a big issue since the fb is
allocated from stolen memory and afaik there is no other user for that
than i915. It's still cleaner to properly unbind the fb and disable the
crtc, which is what drm_framebuffer_remove() does.

Note that after

commit 88891eb1e9eca0ba619518bed31580f91e9cf84d
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Feb 10 18:00:38 2014 +0100

we call drm_framebuffer_cleanup() only after dropping the last reference
on the fb, but that won't happen since we don't unbind the fb. This
results in a drm core warn about a leaked fb.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In Jesse's patch to switch the fbdev framebuffer from an embedded
struct to a pointer the kfree in case of an error was missed. Fix this
up by using our own internal fb allocation helper directly instead of
reinventing that wheel.

We need a to_intel_framebuffer cast unfortunately since all the other
callers of _create still look better whith using a drm_framebuffer as
return pointer.

v2: Add an unlocked __intel_framebuffer_create function since our
dev->struct_mutex locking is too much a mess. With ppgtt we even need
it to take a look at the global gtt offset of pinned objects, since
the vma list might chance from underneath us. At least with the
current global gtt lookup functions. Reported by Mika.

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that it's a normally kmalloce buffer we can use the usual cleanup
paths. The upside here is that if we get the refcounting wrong will be
able to catch it, since the drm core will complain about leftover
framebuffers and kref about underflows.

v2: Kill intel_framebuffer_fini - no longer needed now that we
refcount all fbs properly and only confusing.

v3: We actually still need to call unregister_private to remove the fb
from the idr and drop the idr reference - the final unref doesn't do
that. So much for remembering my own fb liftime rules. Reported by
Imre Deak.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Allocate this struct instead, so we can re-use another allocated
elsewhere if needed.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: WARN_ON if there's no backing storage attached to an fb,
that's a bug.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Multiple definitions show up multiple times in modinfo output.

There's already an identical one in i915_drv.c along with other MODULE_*
definitions, so drop the lone one in intel_fbdev.c.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This should just be a debug.  Add another debug msg to the inherit path
while we're at it.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72098Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we use a stolen buffer, our probe callback shouldn't allocate a new
buffer; we should re-use the one from the BIOS instead if possible.

v2: fix locking (Jesse)
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use the nice Kernel macro, it makes the code much more readable.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This file is all about the legacy fbdev support. If we want to extract
framebuffer functions, we better put those into a separate file.

Also rename functions accordingly, only two have used the intel_fb_
prefix anyway.
Reviewed-by: NChon Ming Lee <chon.ming.lee@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

By moving them to intel_fb.c.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And the gratious overallocation of crtcs. Seems to go back to the ums
days of yonder ...

We also still need it to make the fbdev emulation happy, but I don't
think there's really a need. Especially since the current fbdev
emulation doesn't actually support cloning.

v2: Use sizeof(*pointer) pattern (Jani).

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Done while reviewing all our allocations for fubar. Also a few errant
cases of lacking () for the sizeof operator - just a bit of OCD.

I've left out all the conversions that also should use kcalloc from
this patch  (it's only 2).
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Rather than open-code the teardown of a framebuffer, export the routine
from intel_display.c. This then make intel_fbdev symmetric in its use of
the common intel_framebuffer routines to initialise and clean up the
struct intel_framebuffer. (And new features need only be added in one
location!)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Soon we want to gut a lot of our existing assumptions how many address
spaces an object can live in, and in doing so, embed the drm_mm_node in
the object (and later the VMA).

It's possible in the future we'll want to add more getter/setter
methods, but for now this is enough to enable the VMAs.

v2: Reworked commit message (Ben)
Added comments to the main functions (Ben)
sed -i "s/i915_gem_obj_set_color/i915_gem_obj_ggtt_set_color/" drivers/gpu/drm/i915/*.[ch]
sed -i "s/i915_gem_obj_bound/i915_gem_obj_ggtt_bound/" drivers/gpu/drm/i915/*.[ch]
sed -i "s/i915_gem_obj_size/i915_gem_obj_ggtt_size/" drivers/gpu/drm/i915/*.[ch]
sed -i "s/i915_gem_obj_offset/i915_gem_obj_ggtt_offset/" drivers/gpu/drm/i915/*.[ch]
(Daniel)

v3: Rebased on new reserve_node patch
Changed DRM_DEBUG_KMS to actually work (will need fixing later)
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>