Out of 'perf trace', should be used by other tools that uses
tracepoints.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lyvtxhchz4ga8fwht15x8wou@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We need to differentiate SIGCHLD from SIGINT, the later should cause as
immediate as possible exit, while the former should wait to process the
events that may be perceived in the ring buffer after the SIGCHLD is
handled.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vf6n57ewm3mjy2sz6r491hus@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Initially it tries to find a probe:vfs_getname that should be setup
with:

 perf probe 'vfs_getname=getname_flags:65 pathname=result->name:string'

or with slight changes to cope with code flux in the getname_flags code.

In the future, if a "vfs:getname" tracepoint becomes available, then it
will be preferred.

This is not strictly required and more expensive method of reading the
/proc/pid/fd/ symlink will be used when the fd->path array entry is not
populated by a previous vfs_getname + open syscall ret sequence.

As with any other 'perf probe' probe the setup must be done just once
and the probe will be left inactive, waiting for users, be it 'perf
trace' of any other tool.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ujg8se8glq5izmu8cdkq15po@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that the part that grows the array as needed is untied from the code
that reads the /proc/pid/fd symlink and can be used for the vfs_getname
hook that will set the fd -> path translation too, when available.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ydo5rumyv9hdc1vsfmqamugs@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cast __u64 to u64 to silence this warning on older distros, such as
Fedora 12:

    CC       /tmp/build/perf/util/scripting-engines/trace-event-perl.o
  cc1: warnings being treated as errors
  util/scripting-engines/trace-event-perl.c: In function ‘perl_process_tracepoint’:
  util/scripting-engines/trace-event-perl.c:285: error: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘__u64’
  make[1]: *** [/tmp/build/perf/util/scripting-engines/trace-event-perl.o] Error 1
  make: *** [install] Error 2
  make: Leaving directory `/home/acme/git/linux/tools/perf'
  [acme@fedora12 linux]$
Reported-by: NWaiman Long <Waiman.Long@hp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/n/tip-nlxofdqcdjfm0w9o6bgq4kqv@git.kernel.org
Link: http://lkml.kernel.org/r/1381265120-58532-1-git-send-email-Waiman.Long@hp.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In function filename__read_debuglink(), while the ELF file is opend and
mmapped in elf_begin(), but if this file is considered to not be usable
during the following code, we will goto the close(fd) directly. The
elf_end() is skipped.  So, the mmaped ELF file cannot be munmapped. The
mmapped areas exist during the life of perf.

This is a memory leak.  This patch fixed this bug.
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NChenggang Qin <chenggang.qcg@taobao.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Chenggang Qin <chenggang.qcg@taobao.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Yanmin Zhang <yanmin.zhang@intel.com>
Link: http://lkml.kernel.org/r/1381451279-4109-1-git-send-email-chenggang.qin@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In function symbols__fixup_duplicate(), while duplicated symbols are
found, only the rb_node is removed from the tree. The symbol structures
themself are ignored.  Then, these memory areas are lost.
Signed-off-by: NChenggang Qin <chenggang.qcg@taobao.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Yanmin Zhang <yanmin.zhang@intel.com>
Link: http://lkml.kernel.org/r/1381451279-4109-3-git-send-email-chenggang.qin@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The target address is provided by objdump and is not necessary a memory
address.  Add a helper to get the correct address.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-8-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

kcore can be used to view the running kernel object code.  However,
kcore changes as modules are loaded and unloaded, and when the kernel
decides to modify its own code.  Consequently it is useful to create a
copy of kcore at a particular time.  Unlike vmlinux, kcore is not unique
for a given build-id.  And in addition, the kallsyms and modules files
are also needed.  The tool therefore creates a directory:

	~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh>

which contains: kcore, kallsyms and modules.

Note that the copied kcore contains only code sections.  See the
kcore_copy() function for how that is determined.

The tool will not make additional copies of kcore if there is already
one with the same modules at the same addresses.

Currently, perf tools will not look for kcore in the cache.  That is
addressed in another patch.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com
[ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12,
  use at least one member initializer when initializing a struct to
  zeros, also to fix the build on f12 ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When following a call, annotate_browser__callq() uses the current
symbol's map to look up the target ip.  That will not work if the target
ip is on a map with a different mapping (i.e.  start - pgoff is
different).
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When no vmlinux is found, tools will use kallsyms and, if possible,
kcore.  Add the ability to find kcore in the build-id cache.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a function to copy a file specifying the permissions to use for the
created file.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-5-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Use the new map_groups__find_ams() method to find kcore symbols on other
maps.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Namhyung Kim noticed that the autodep .d file inclusion rule was
unnecessarily complicated:

  > > +-include *.d */*.d
  >
  > Hmm.. this */*.d part is really needed?

Only include *.d files.
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Namhyung Kim noticed that the stackprotector testcase was incomplete:

  > The flag being checked should be -"W"stack-protector instead of
  > -"f"stack-protector.  And the gcc manpage says that -Wstack-protector is
  > only active when -fstack-protector is active.  So the end result should
  > look like
  >
  >         $(BUILD) -Werror -fstack-protector -Wstack-protector

Add -Wstack-protector.
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Namhyung Kim noticed that the volatile-register-var feature check
is superfluous:

 > The gcc manpage says this warning is enabled by -Wall, and we add -Wall
 > to CFLAGS before doing feature checks.  So all gcc versions that support
 > -Wvolatile-register-var enables it by default without this check and
 > older gcc versions will always fail the feature check.

Remove it - this will further speed up feature checks.
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Ulrich Drepper and Namhyung Kim reported that the libelf logic in
config/Makefile is duplicated in part.

Remove the duplication, and also remove the now unused FLAGS_LIBELF
variable.
Reported-by: NUlrich Drepper <drepper@gmail.com>
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Namhyung Kim reported these duplicate DPACKAGE definitions:

  test-libbfd:
       $(BUILD) -DPACKAGE='perf' -DPACKAGE=perf -lbfd -ldl

Fix all affected places and use Namhyung's suggestion that the
definition should look like a normal C string: -DPACKAGE='"perf"'.
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Arnaldo reported that 'make DEBUG=1' does not work anymore.

The reason is that 'Makefile' only passes it through to
'Makefile.perf' via the environment, but 'Makefile.perf'
checks that it's a command line option:

    ifeq ("$(origin DEBUG)", "command line")
      PERF_DEBUG = $(DEBUG)
    endif

So pass it through properly, and also clean up DEBUG parameter
handling while at it and fix a couple of annoyances:

 - DEBUG=0 used to be interpreted as 'debugging on'. Turn it
   into 'debugging off' instead.

 - Same was the case for 'DEBUG=' - turn that into debug-off
   as well.

 - Pass in just a clean, sanitized 'DEBUG' value and get rid of
   the intermediate, unnecessary PERF_DEBUG variable.
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Arnaldo reported that non-existent build directories were not
recognized  properly. The reason is readlink failure causing 'O'
to become empty.

Solve it by passing through the 'O' variable unmodified if
readlink fails.
Reported-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131009150023.GA10167@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a function to find a symbol using an ip that might be on a different
map.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The objdump tool fails to annotate module symbols when looking at kcore.

Workaround this by extracting object code from kcore and putting it in a
temporary file for objdump to use instead.

The temporary file is created to look like kcore but contains only the
function being disassembled.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381320078-16497-3-git-send-email-adrian.hunter@intel.com
[ Renamed 'index' to 'idx' to avoid shadowing string.h's 'index' in Fedora 12,
  Replace local with variable length with malloc/free to fix build in Fedora 12 ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before using kcore we need to check that modules are in memory at the
same addresses that they were when data was recorded.

This is done because, while we could remap symbols to different
addresses, the object code linkages would still be different which would
provide an erroneous view of the object code.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381320078-16497-2-git-send-email-adrian.hunter@intel.com
[ Rename basename to base_name to avoid shadowing libgen's basename in fedora 12 ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We fail build with NO_DEMANGLE with missing -lbfd externals error.
The reason is that we now use bfd code in srcline object:
  perf tools: Implement addr2line directly using libbfd

So we need to check/add -lbfd always now.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>

Fix for a memory leak on test_file() function in dso-data.c.
Signed-off-by: NFelipe Pena <felipensp@gmail.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381370438-4209-1-git-send-email-felipensp@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

trace-event-parse.c:parse_proc_kallsyms()

    Old GCC (4.4.2) does not see through the code flow of get_srcline() and
gets confused about the status of 'file' and 'line':

    CC       /tmp/build/perf/util/srcline.o
  cc1: warnings being treated as errors
  util/srcline.c: In function ¿get_srcline¿:
  util/srcline.c:226: error: ¿file¿ may be used uninitialized in this function
  util/srcline.c:227: error: ¿line¿ may be used uninitialized in this function
  make[1]: *** [/tmp/build/perf/util/srcline.o] Error 1
  make: *** [install] Error 2
  make: Leaving directory `/home/acme/git/linux/tools/perf'
  [acme@fedora12 linux]$

Help out GCC by initializing 'file' and 'line'.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/n/tip-h8k7h49z3cndqgjdftkmm9f8@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When enabled dumps a summary of all syscalls by task with the usual
statistics -- min, max, average and relative stddev. For example,

make - 26341 :       3344   [ 17.4% ]      0.000 ms

                read :   52    0.000     4.802     0.644   30.08
               write :   20    0.004     0.036     0.010   21.72
                open :   24    0.003     0.046     0.014   23.68
               close :   64    0.002     0.055     0.008   22.53
                stat : 2714    0.002     0.222     0.004    4.47
               fstat :   18    0.001     0.041     0.006   46.26
                mmap :   30    0.003     0.009     0.006    5.71
            mprotect :    8    0.006     0.039     0.016   32.16
              munmap :   12    0.007     0.077     0.020   38.25
                 brk :   48    0.002     0.014     0.004   10.18
        rt_sigaction :   18    0.002     0.002     0.002    2.11
      rt_sigprocmask :   60    0.002     0.128     0.010   32.88
              access :    2    0.006     0.006     0.006    0.00
                pipe :   12    0.004     0.048     0.013   35.98
               vfork :   34    0.448     0.980     0.692    3.04
              execve :   20    0.000     0.387     0.046   56.66
               wait4 :   34    0.017  9923.287   593.221   68.45
               fcntl :    8    0.001     0.041     0.013   48.79
            getdents :   48    0.002     0.079     0.013   19.62
              getcwd :    2    0.005     0.005     0.005    0.00
               chdir :    2    0.070     0.070     0.070    0.00
           getrlimit :    2    0.045     0.045     0.045    0.00
          arch_prctl :    2    0.002     0.002     0.002    0.00
           setrlimit :    2    0.002     0.002     0.002    0.00
              openat :   94    0.003     0.005     0.003    2.11
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381289214-24885-3-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Similar to other findnew based methods if the requested object is not
found, add it to the list.

v2: followed format of other findnew methods per acme's request
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381289214-24885-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently, execution of 'perf trace' reports the following cryptic
message to the user:

$ perf trace
Couldn't read the raw_syscalls tracepoints information!

Typically this happens because the user does not have permissions to
read the debugfs filesystem. Also handle the case when the kernel was
not compiled with debugfs support or when it isn't mounted.

Now, the tool prints detailed error messages:

$ perf trace
Error:	Unable to find debugfs
Hint:	Was your kernel was compiled with debugfs support?
Hint:	Is the debugfs filesystem mounted?
Hint:	Try 'sudo mount -t debugfs nodev /sys/kernel/debug'

$ perf trace
Error:	No permissions to read /sys/kernel/debug//tracing/events/raw_syscalls
Hint:	Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/'
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1380863851-14460-1-git-send-email-artagnon@gmail.com
[ Added ready to use commands to fix the issues as extra hints, use the
  current debugfs mount point when reporting permission error, use
  strerror_r instead of the deprecated sys_errlist, as reported by David Ahern ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

While at it, update the synopsis to show both forms.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1380791716-10325-1-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

'make install' used to show all the install lines, which is way too
verbose to be really informative to the user.

Implement summary output instead:

  comet:~/tip/tools/perf> make install
    BUILD:   Doing 'make -j12' parallel build
    SUBDIR   Documentation
    INSTALL  Documentation-man
    INSTALL  binaries
    INSTALL  libexec
    INSTALL  perf-archive
    INSTALL  perl-scripts
    INSTALL  python-scripts
    INSTALL  bash_completion-script
    INSTALL  tests

'make install V=1' will still show the old, detailed output.

Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1381312169-17354-5-git-send-email-mingo@kernel.org
[ Fixed conflict with libperf-gtk patches in acme/perf/core, cope with 'trace' alias ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before:

  CC util/pmu.o
  CC util/parse-events.o
PERF_VERSION = 3.12.rc4.g1b30c
  CC util/parse-events-flex.o
  GEN perf-archive

After:

  CC util/pmu.o
  CC util/parse-events.o
  PERF_VERSION = 3.12.rc4.g1b30c
  CC util/parse-events-flex.o
  GEN perf-archive
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381312169-17354-4-git-send-email-mingo@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The various build lines from libtraceevent and perf mix up during a
parallel build and produce unaligned output like:

    CC builtin-buildid-list.o
    CC builtin-buildid-cache.o
    CC builtin-list.o
  CC FPIC            trace-seq.o
    CC builtin-record.o
  CC FPIC            parse-filter.o
    CC builtin-report.o
    CC builtin-stat.o
  CC FPIC            parse-utils.o
  CC FPIC            kbuffer-parse.o
    CC builtin-timechart.o
    CC builtin-top.o
    CC builtin-script.o
  BUILD STATIC LIB   libtraceevent.a
    CC builtin-probe.o
    CC builtin-kmem.o
    CC builtin-lock.o

To solve this, harmonize all the build message alignments to be similar
to the kernel's kbuild output: prefixed by two spaces and 11-char wide.

After the patch the output looks pretty tidy, even if output lines get
mixed up:

  CC      builtin-annotate.o
  FLAGS:  * new build flags or cross compiler
  CC      builtin-bench.o
  AR      liblk.a
  CC      bench/sched-messaging.o
  CC FPIC event-parse.o
  CC      bench/sched-pipe.o
  CC FPIC trace-seq.o
  CC      bench/mem-memcpy.o
  CC      bench/mem-memset.o
  CC FPIC parse-filter.o
  CC      builtin-diff.o
  CC      builtin-evlist.o
  CC      builtin-help.o
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381312169-17354-3-git-send-email-mingo@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

'make clean' used to show all the rm lines, which isn't really
informative in any way and spams the console.

Implement summary output:

  comet:~/tip/tools/perf> make clean
   CLEAN libtraceevent
   CLEAN liblk
   CLEAN config
   CLEAN core-objs
   CLEAN core-progs
   CLEAN core-gen
   CLEAN Documentation
   CLEAN python

'make clean V=1' will still show the old, detailed output.
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381312169-17354-2-git-send-email-mingo@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix the duplicate util/util printout Arnaldo reported:

       $ make V=1 O=/tmp/build/perf -C tools/perf/ util/srcline.o
   ...
       # Redirected target util/srcline.o =>     /tmp/build/perf/util/util/srcline.o
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20131010054256.GA23716@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

 [root@zoo linux]# trace -e ioctl | grep -v "cmd: 0x" | head -10
      0.386 ( 0.001 ms): trace/1602 ioctl(fd: 1<pipe:[127057]>, cmd: TCGETS, arg: 0x7fff59fcb4d0          ) = -1 ENOTTY Inappropriate ioctl for device
   1459.368 ( 0.002 ms): inotify_reader/10352 ioctl(fd: 18<anon_inode:inotify>, cmd: FIONREAD, arg: 0x7fb835228bcc  ) = 0
   1463.586 ( 0.002 ms): inotify_reader/10352 ioctl(fd: 18<anon_inode:inotify>, cmd: FIONREAD, arg: 0x7fb835228bcc  ) = 0
   1463.611 ( 0.002 ms): inotify_reader/10352 ioctl(fd: 18<anon_inode:inotify>, cmd: FIONREAD, arg: 0x7fb835228bcc  ) = 0
   3740.526 ( 0.002 ms): awk/1612 ioctl(fd: 1<pipe:[128265]>, cmd: TCGETS, arg: 0x7fff4d166b90          ) = -1 ENOTTY Inappropriate ioctl for device
   3740.704 ( 0.001 ms): awk/1612 ioctl(fd: 3</proc/meminfo>, cmd: TCGETS, arg: 0x7fff4d1669a0          ) = -1 ENOTTY Inappropriate ioctl for device
   3742.550 ( 0.002 ms): ps/1614 ioctl(fd: 1<pipe:[128266]>, cmd: TIOCGWINSZ, arg: 0x7fff591762b0      ) = -1 ENOTTY Inappropriate ioctl for device
   3742.555 ( 0.003 ms): ps/1614 ioctl(fd: 2<socket:[19550]>, cmd: TIOCGWINSZ, arg: 0x7fff591762b0     ) = -1 ENOTTY Inappropriate ioctl for device
   3742.558 ( 0.002 ms): ps/1614 ioctl(cmd: TIOCGWINSZ, arg: 0x7fff591762b0                            ) = -1 ENOTTY Inappropriate ioctl for device
   3742.572 ( 0.002 ms): ps/1614 ioctl(fd: 1<pipe:[128266]>, cmd: TCGETS, arg: 0x7fff59176220          ) = -1 ENOTTY Inappropriate ioctl for device
 [root@zoo linux]#

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-afajwap3mr60dfl4qpdl1pxn@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Right now when an index passed to that method has no string associated
it'll print the index as a decimal number, prepare it so that we can use
it to print it in hex as well, for ioctls, for instance.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nsvy06sqj64qvnkmzvwxsx2v@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that the index passed doesn't have to start at zero, being
decremented from an offset specified when declaring the strarray before
being used as the real array index.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-k1ce6uqyt4qar9edrj3mevod@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Make a separate function to parse /proc/modules so that it can be
reused.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381221956-16699-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allows commands to leverage intlist infrastructure for opaque
structures.

For example an upcoming perf-trace change will use this as a means of
tracking syscalls statistics by task.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-6-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>