1. 12 2月, 2015 6 次提交
    • K
      mm/page_alloc.c: drop dead destroy_compound_page() · 6e9f0d58
      Kirill A. Shutemov 提交于
      The only caller is __free_one_page(). By the time we should have
      page->flags to be cleared already:
      
       - for 0-order pages though PCP list:
      	free_hot_cold_page()
      		free_pages_prepare()
      			free_pages_check()
      				page->flags &= ~PAGE_FLAGS_CHECK_AT_PREP;
      		<put the page to PCP list>
      
      	free_pcppages_bulk()
      		page = <withdraw pages from PCP list>
      		__free_one_page(page)
      
       - for non-0-order pages:
      	__free_pages_ok()
      		free_pages_prepare()
      			free_pages_check()
      				page->flags &= ~PAGE_FLAGS_CHECK_AT_PREP;
      		free_one_page()
      			__free_one_page()
      
      So there's no way PageCompound() will return true in __free_one_page().
      Let's remove dead destroy_compound_page() and put assert for page->flags
      there instead.
      Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Cc: Vlastimil Babka <vbabka@suse.cz>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6e9f0d58
    • V
      mm: reduce try_to_compact_pages parameters · 1a6d53a1
      Vlastimil Babka 提交于
      Expand the usage of the struct alloc_context introduced in the previous
      patch also for calling try_to_compact_pages(), to reduce the number of its
      parameters.  Since the function is in different compilation unit, we need
      to move alloc_context definition in the shared mm/internal.h header.
      
      With this change we get simpler code and small savings of code size and stack
      usage:
      
      add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-27 (-27)
      function                                     old     new   delta
      __alloc_pages_direct_compact                 283     256     -27
      add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-13 (-13)
      function                                     old     new   delta
      try_to_compact_pages                         582     569     -13
      
      Stack usage of __alloc_pages_direct_compact goes from 24 to none (per
      scripts/checkstack.pl).
      Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
      Acked-by: NMichal Hocko <mhocko@suse.cz>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1a6d53a1
    • V
      mm, page_alloc: reduce number of alloc_pages* functions' parameters · a9263751
      Vlastimil Babka 提交于
      Introduce struct alloc_context to accumulate the numerous parameters
      passed between the alloc_pages* family of functions and
      get_page_from_freelist().  This excludes gfp_flags and alloc_info, which
      mutate too much along the way, and allocation order, which is conceptually
      different.
      
      The result is shorter function signatures, as well as overal code size and
      stack usage reductions.
      
      bloat-o-meter:
      
      add/remove: 0/0 grow/shrink: 1/2 up/down: 127/-310 (-183)
      function                                     old     new   delta
      get_page_from_freelist                      2525    2652    +127
      __alloc_pages_direct_compact                 329     283     -46
      __alloc_pages_nodemask                      2564    2300    -264
      
      checkstack.pl:
      
      function                            old    new
      __alloc_pages_nodemask              248    200
      get_page_from_freelist              168    184
      __alloc_pages_direct_compact         40     24
      Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
      Acked-by: NMichal Hocko <mhocko@suse.cz>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a9263751
    • V
      mm: set page->pfmemalloc in prep_new_page() · 75379191
      Vlastimil Babka 提交于
      The possibility of replacing the numerous parameters of alloc_pages*
      functions with a single structure has been discussed when Minchan proposed
      to expand the x86 kernel stack [1].  This series implements the change,
      along with few more cleanups/microoptimizations.
      
      The series is based on next-20150108 and I used gcc 4.8.3 20140627 on
      openSUSE 13.2 for compiling.  Config includess NUMA and COMPACTION.
      
      The core change is the introduction of a new struct alloc_context, which looks
      like this:
      
      struct alloc_context {
              struct zonelist *zonelist;
              nodemask_t *nodemask;
              struct zone *preferred_zone;
              int classzone_idx;
              int migratetype;
              enum zone_type high_zoneidx;
      };
      
      All the contents is mostly constant, except that __alloc_pages_slowpath()
      changes preferred_zone, classzone_idx and potentially zonelist.  But
      that's not a problem in case control returns to retry_cpuset: in
      __alloc_pages_nodemask(), those will be reset to initial values again
      (although it's a bit subtle).  On the other hand, gfp_flags and alloc_info
      mutate so much that it doesn't make sense to put them into alloc_context.
      Still, the result is one parameter instead of up to 7.  This is all in
      Patch 2.
      
      Patch 3 is a step to expand alloc_context usage out of page_alloc.c
      itself.  The function try_to_compact_pages() can also much benefit from
      the parameter reduction, but it means the struct definition has to be
      moved to a shared header.
      
      Patch 1 should IMHO be included even if the rest is deemed not useful
      enough.  It improves maintainability and also has some code/stack
      reduction.  Patch 4 is OTOH a tiny optimization.
      
      Overall bloat-o-meter results:
      
      add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-460 (-460)
      function                                     old     new   delta
      nr_free_zone_pages                           129     115     -14
      __alloc_pages_direct_compact                 329     256     -73
      get_page_from_freelist                      2670    2576     -94
      __alloc_pages_nodemask                      2564    2285    -279
      try_to_compact_pages                         582     579      -3
      
      Overall stack sizes per ./scripts/checkstack.pl:
      
                                old   new delta
      get_page_from_freelist:   184   184     0
      __alloc_pages_nodemask    248   200   -48
      __alloc_pages_direct_c     40     -   -40
      try_to_compact_pages       72    72     0
                                            -88
      
      [1] http://marc.info/?l=linux-mm&m=140142462528257&w=2
      
      This patch (of 4):
      
      prep_new_page() sets almost everything in the struct page of the page
      being allocated, except page->pfmemalloc.  This is not obvious and has at
      least once led to a bug where page->pfmemalloc was forgotten to be set
      correctly, see commit 8fb74b9f ("mm: compaction: partially revert
      capture of suitable high-order page").
      
      This patch moves the pfmemalloc setting to prep_new_page(), which means it
      needs to gain alloc_flags parameter.  The call to prep_new_page is moved
      from buffered_rmqueue() to get_page_from_freelist(), which also leads to
      simpler code.  An obsolete comment for buffered_rmqueue() is replaced.
      
      In addition to better maintainability there is a small reduction of code
      and stack usage for get_page_from_freelist(), which inlines the other
      functions involved.
      
      add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-145 (-145)
      function                                     old     new   delta
      get_page_from_freelist                      2670    2525    -145
      
      Stack usage is reduced from 184 to 168 bytes.
      Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
      Acked-by: NMichal Hocko <mhocko@suse.cz>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      75379191
    • X
      kmemcheck: move hook into __alloc_pages_nodemask() for the page allocator · 23f086f9
      Xishi Qiu 提交于
      Now kmemcheck_pagealloc_alloc() is only called by __alloc_pages_slowpath().
      __alloc_pages_nodemask()
      	__alloc_pages_slowpath()
      		kmemcheck_pagealloc_alloc()
      
      And the page will not be tracked by kmemcheck in the following path.
      __alloc_pages_nodemask()
      	get_page_from_freelist()
      
      So move kmemcheck_pagealloc_alloc() into __alloc_pages_nodemask(),
      like this:
      __alloc_pages_nodemask()
      	...
      	get_page_from_freelist()
      	if (!page)
      		__alloc_pages_slowpath()
      	kmemcheck_pagealloc_alloc()
      	...
      Signed-off-by: NXishi Qiu <qiuxishi@huawei.com>
      Cc: Vegard Nossum <vegard.nossum@oracle.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: Li Zefan <lizefan@huawei.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      23f086f9
    • A
      mm/page_alloc.c:__alloc_pages_nodemask(): don't alter arg gfp_mask · 91fbdc0f
      Andrew Morton 提交于
      __alloc_pages_nodemask() strips __GFP_IO when retrying the page
      allocation.  But it does this by altering the function-wide variable
      gfp_mask.  This will cause subsequent allocation attempts to inadvertently
      use the modified gfp_mask.
      
      Also, pass the correct mask (the mask we actually used) into
      trace_mm_page_alloc().
      
      Cc: Ming Lei <ming.lei@canonical.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: David Rientjes <rientjes@google.com>
      Acked-by: NVlastimil Babka <vbabka@suse.cz>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      91fbdc0f
  2. 11 2月, 2015 1 次提交
    • W
      mm/page_alloc.c: place zone_id check before VM_BUG_ON_PAGE check · 4c5018ce
      Weijie Yang 提交于
      If the freeing page and its buddy page are not at the same zone, the
      current holding zone->lock for the freeing page cann't prevent buddy page
      getting allocated, this could trigger VM_BUG_ON_PAGE in page_is_buddy() at
      a very tiny chance, such as:
      
      cpu 0:						cpu 1:
      hold zone_1 lock
      check page and it buddy
      PageBuddy(buddy) is true			hold zone_2 lock
      page_order(buddy) == order is true		alloc buddy
      trigger VM_BUG_ON_PAGE(page_count(buddy) != 0)
      
      zone_1->lock prevents the freeing page getting allocated
      zone_2->lock prevents the buddy page getting allocated
      they are not the same zone->lock.
      
      If we can't remove the zone_id check statement, it's better handle this
      rare race.  This patch fixes this by placing the zone_id check before the
      VM_BUG_ON_PAGE check.
      Signed-off-by: NWeijie Yang <weijie.yang@samsung.com>
      Acked-by: NMel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Rik van Riel <riel@redhat.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4c5018ce
  3. 27 1月, 2015 1 次提交
    • J
      mm: page_alloc: embed OOM killing naturally into allocation slowpath · 9879de73
      Johannes Weiner 提交于
      The OOM killing invocation does a lot of duplicative checks against the
      task's allocation context.  Rework it to take advantage of the existing
      checks in the allocator slowpath.
      
      The OOM killer is invoked when the allocator is unable to reclaim any
      pages but the allocation has to keep looping.  Instead of having a check
      for __GFP_NORETRY hidden in oom_gfp_allowed(), just move the OOM
      invocation to the true branch of should_alloc_retry().  The __GFP_FS
      check from oom_gfp_allowed() can then be moved into the OOM avoidance
      branch in __alloc_pages_may_oom(), along with the PF_DUMPCORE test.
      
      __alloc_pages_may_oom() can then signal to the caller whether the OOM
      killer was invoked, instead of requiring it to duplicate the order and
      high_zoneidx checks to guess this when deciding whether to continue.
      Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
      Acked-by: NMichal Hocko <mhocko@suse.cz>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9879de73
  4. 19 12月, 2014 1 次提交
    • P
      mm: cma: split cma-reserved in dmesg log · e48322ab
      Pintu Kumar 提交于
      When the system boots up, in the dmesg logs we can see the memory
      statistics along with total reserved as below.  Memory: 458840k/458840k
      available, 65448k reserved, 0K highmem
      
      When CMA is enabled, still the total reserved memory remains the same.
      However, the CMA memory is not considered as reserved.  But, when we see
      /proc/meminfo, the CMA memory is part of free memory.  This creates
      confusion.  This patch corrects the problem by properly subtracting the
      CMA reserved memory from the total reserved memory in dmesg logs.
      
      Below is the dmesg snapshot from an arm based device with 512MB RAM and
      12MB single CMA region.
      
      Before this change:
        Memory: 458840k/458840k available, 65448k reserved, 0K highmem
      
      After this change:
        Memory: 458840k/458840k available, 53160k reserved, 12288k cma-reserved, 0K highmem
      Signed-off-by: NPintu Kumar <pintu.k@samsung.com>
      Signed-off-by: NVishnu Pratap Singh <vishnu.ps@samsung.com>
      Acked-by: NMichal Nazarewicz <mina86@mina86.com>
      Cc: Rafael Aquini <aquini@redhat.com>
      Cc: Jerome Marchand <jmarchan@redhat.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e48322ab
  5. 14 12月, 2014 7 次提交
    • Z
      mm: remove the highmem zones' memmap in the highmem zone · ba914f48
      Zhong Hongbo 提交于
      Since 01cefaef ("mm: provide more accurate estimation
      of pages occupied by memmap") allocate the pages from lowmem for the
      highmem zones' memmap. So It is not need to reserver the memmap's for
      the highmem.
      
      A 2G DDR3 for the arm platform:
      On node 0 totalpages: 524288
      free_area_init_node: node 0, pgdat 80ccd380, node_mem_map 80d38000
        DMA zone: 3568 pages used for memmap
        DMA zone: 0 pages reserved
        DMA zone: 456704 pages, LIFO batch:31
        HighMem zone: 528 pages used for memmap
        HighMem zone: 67584 pages, LIFO batch:15
      
      On node 0 totalpages: 524288
      free_area_init_node: node 0, pgdat 80cd6f40, node_mem_map 80d42000
        DMA zone: 3568 pages used for memmap
        DMA zone: 0 pages reserved
        DMA zone: 456704 pages, LIFO batch:31
        HighMem zone: 67584 pages, LIFO batch:15
      Signed-off-by: NHongbo Zhong <hongbo.zhong@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ba914f48
    • J
      mm: vmscan: invoke slab shrinkers from shrink_zone() · 6b4f7799
      Johannes Weiner 提交于
      The slab shrinkers are currently invoked from the zonelist walkers in
      kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the
      eligible LRU pages and assemble a nodemask to pass to NUMA-aware
      shrinkers, which then again have to walk over the nodemask.  This is
      redundant code, extra runtime work, and fairly inaccurate when it comes to
      the estimation of actually scannable LRU pages.  The code duplication will
      only get worse when making the shrinkers cgroup-aware and requiring them
      to have out-of-band cgroup hierarchy walks as well.
      
      Instead, invoke the shrinkers from shrink_zone(), which is where all
      reclaimers end up, to avoid this duplication.
      
      Take the count for eligible LRU pages out of get_scan_count(), which
      considers many more factors than just the availability of swap space, like
      zone_reclaimable_pages() currently does.  Accumulate the number over all
      visited lruvecs to get the per-zone value.
      
      Some nodes have multiple zones due to memory addressing restrictions.  To
      avoid putting too much pressure on the shrinkers, only invoke them once
      for each such node, using the class zone of the allocation as the pivot
      zone.
      
      For now, this integrates the slab shrinking better into the reclaim logic
      and gets rid of duplicative invocations from kswapd, direct reclaim, and
      zone reclaim.  It also prepares for cgroup-awareness, allowing
      memcg-capable shrinkers to be added at the lruvec level without much
      duplication of both code and runtime work.
      
      This changes kswapd behavior, which used to invoke the shrinkers for each
      zone, but with scan ratios gathered from the entire node, resulting in
      meaningless pressure quantities on multi-zone nodes.
      
      Zone reclaim behavior also changes.  It used to shrink slabs until the
      same amount of pages were shrunk as were reclaimed from the LRUs.  Now it
      merely invokes the shrinkers once with the zone's scan ratio, which makes
      the shrinkers go easier on caches that implement aging and would prefer
      feeding back pressure from recently used slab objects to unused LRU pages.
      
      [vdavydov@parallels.com: assure class zone is populated]
      Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
      Cc: Dave Chinner <david@fromorbit.com>
      Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6b4f7799
    • J
      mm/page_owner: keep track of page owners · 48c96a36
      Joonsoo Kim 提交于
      This is the page owner tracking code which is introduced so far ago.  It
      is resident on Andrew's tree, though, nobody tried to upstream so it
      remain as is.  Our company uses this feature actively to debug memory leak
      or to find a memory hogger so I decide to upstream this feature.
      
      This functionality help us to know who allocates the page.  When
      allocating a page, we store some information about allocation in extra
      memory.  Later, if we need to know status of all pages, we can get and
      analyze it from this stored information.
      
      In previous version of this feature, extra memory is statically defined in
      struct page, but, in this version, extra memory is allocated outside of
      struct page.  It enables us to turn on/off this feature at boottime
      without considerable memory waste.
      
      Although we already have tracepoint for tracing page allocation/free,
      using it to analyze page owner is rather complex.  We need to enlarge the
      trace buffer for preventing overlapping until userspace program launched.
      And, launched program continually dump out the trace buffer for later
      analysis and it would change system behaviour with more possibility rather
      than just keeping it in memory, so bad for debug.
      
      Moreover, we can use page_owner feature further for various purposes.  For
      example, we can use it for fragmentation statistics implemented in this
      patch.  And, I also plan to implement some CMA failure debugging feature
      using this interface.
      
      I'd like to give the credit for all developers contributed this feature,
      but, it's not easy because I don't know exact history.  Sorry about that.
      Below is people who has "Signed-off-by" in the patches in Andrew's tree.
      
      Contributor:
      Alexander Nyberg <alexn@dsv.su.se>
      Mel Gorman <mgorman@suse.de>
      Dave Hansen <dave@linux.vnet.ibm.com>
      Minchan Kim <minchan@kernel.org>
      Michal Nazarewicz <mina86@mina86.com>
      Andrew Morton <akpm@linux-foundation.org>
      Jungsoo Son <jungsoo.son@lge.com>
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Dave Hansen <dave@sr71.net>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Jungsoo Son <jungsoo.son@lge.com>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      48c96a36
    • J
      mm/debug-pagealloc: make debug-pagealloc boottime configurable · 031bc574
      Joonsoo Kim 提交于
      Now, we have prepared to avoid using debug-pagealloc in boottime.  So
      introduce new kernel-parameter to disable debug-pagealloc in boottime, and
      makes related functions to be disabled in this case.
      
      Only non-intuitive part is change of guard page functions.  Because guard
      page is effective only if debug-pagealloc is enabled, turning off
      according to debug-pagealloc is reasonable thing to do.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Dave Hansen <dave@sr71.net>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Jungsoo Son <jungsoo.son@lge.com>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      031bc574
    • J
      mm/debug-pagealloc: prepare boottime configurable on/off · e30825f1
      Joonsoo Kim 提交于
      Until now, debug-pagealloc needs extra flags in struct page, so we need to
      recompile whole source code when we decide to use it.  This is really
      painful, because it takes some time to recompile and sometimes rebuild is
      not possible due to third party module depending on struct page.  So, we
      can't use this good feature in many cases.
      
      Now, we have the page extension feature that allows us to insert extra
      flags to outside of struct page.  This gets rid of third party module
      issue mentioned above.  And, this allows us to determine if we need extra
      memory for this page extension in boottime.  With these property, we can
      avoid using debug-pagealloc in boottime with low computational overhead in
      the kernel built with CONFIG_DEBUG_PAGEALLOC.  This will help our
      development process greatly.
      
      This patch is the preparation step to achive above goal.  debug-pagealloc
      originally uses extra field of struct page, but, after this patch, it will
      use field of struct page_ext.  Because memory for page_ext is allocated
      later than initialization of page allocator in CONFIG_SPARSEMEM, we should
      disable debug-pagealloc feature temporarily until initialization of
      page_ext.  This patch implements this.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Dave Hansen <dave@sr71.net>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Jungsoo Son <jungsoo.son@lge.com>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e30825f1
    • J
      mm/page_ext: resurrect struct page extending code for debugging · eefa864b
      Joonsoo Kim 提交于
      When we debug something, we'd like to insert some information to every
      page.  For this purpose, we sometimes modify struct page itself.  But,
      this has drawbacks.  First, it requires re-compile.  This makes us
      hesitate to use the powerful debug feature so development process is
      slowed down.  And, second, sometimes it is impossible to rebuild the
      kernel due to third party module dependency.  At third, system behaviour
      would be largely different after re-compile, because it changes size of
      struct page greatly and this structure is accessed by every part of
      kernel.  Keeping this as it is would be better to reproduce errornous
      situation.
      
      This feature is intended to overcome above mentioned problems.  This
      feature allocates memory for extended data per page in certain place
      rather than the struct page itself.  This memory can be accessed by the
      accessor functions provided by this code.  During the boot process, it
      checks whether allocation of huge chunk of memory is needed or not.  If
      not, it avoids allocating memory at all.  With this advantage, we can
      include this feature into the kernel in default and can avoid rebuild and
      solve related problems.
      
      Until now, memcg uses this technique.  But, now, memcg decides to embed
      their variable to struct page itself and it's code to extend struct page
      has been removed.  I'd like to use this code to develop debug feature, so
      this patch resurrect it.
      
      To help these things to work well, this patch introduces two callbacks for
      clients.  One is the need callback which is mandatory if user wants to
      avoid useless memory allocation at boot-time.  The other is optional, init
      callback, which is used to do proper initialization after memory is
      allocated.  Detailed explanation about purpose of these functions is in
      code comment.  Please refer it.
      
      Others are completely same with previous extension code in memcg.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Dave Hansen <dave@sr71.net>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Jungsoo Son <jungsoo.son@lge.com>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      eefa864b
    • J
      mm/debug-pagealloc: cleanup page guard code · 2847cf95
      Joonsoo Kim 提交于
      Page guard is used by debug-pagealloc feature.  Currently, it is
      open-coded, but, I think that more abstraction of it makes core page
      allocator code more readable.
      
      There is no functional difference.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2847cf95
  6. 11 12月, 2014 10 次提交
    • J
      mm: move page->mem_cgroup bad page handling into generic code · 9edad6ea
      Johannes Weiner 提交于
      Now that the external page_cgroup data structure and its lookup is
      gone, let the generic bad_page() check for page->mem_cgroup sanity.
      Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
      Acked-by: NMichal Hocko <mhocko@suse.cz>
      Acked-by: NVladimir Davydov <vdavydov@parallels.com>
      Acked-by: NDavid S. Miller <davem@davemloft.net>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9edad6ea
    • J
      mm: embed the memcg pointer directly into struct page · 1306a85a
      Johannes Weiner 提交于
      Memory cgroups used to have 5 per-page pointers.  To allow users to
      disable that amount of overhead during runtime, those pointers were
      allocated in a separate array, with a translation layer between them and
      struct page.
      
      There is now only one page pointer remaining: the memcg pointer, that
      indicates which cgroup the page is associated with when charged.  The
      complexity of runtime allocation and the runtime translation overhead is
      no longer justified to save that *potential* 0.19% of memory.  With
      CONFIG_SLUB, page->mem_cgroup actually sits in the doubleword padding
      after the page->private member and doesn't even increase struct page,
      and then this patch actually saves space.  Remaining users that care can
      still compile their kernels without CONFIG_MEMCG.
      
           text    data     bss     dec     hex     filename
        8828345 1725264  983040 11536649 b00909  vmlinux.old
        8827425 1725264  966656 11519345 afc571  vmlinux.new
      
      [mhocko@suse.cz: update Documentation/cgroups/memory.txt]
      Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
      Acked-by: NMichal Hocko <mhocko@suse.cz>
      Acked-by: NVladimir Davydov <vdavydov@parallels.com>
      Acked-by: NDavid S. Miller <davem@davemloft.net>
      Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Michal Hocko <mhocko@suse.cz>
      Cc: Vladimir Davydov <vdavydov@parallels.com>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: NKonstantin Khlebnikov <koct9i@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1306a85a
    • W
      mm: fix a spelling mistake · 26086de3
      Wei Yuan 提交于
      Signed-off-by Wei Yuan <weiyuan.wei@huawei.com>
      Acked-by: NRik van Riel <riel@redhat.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      26086de3
    • V
      mm, compaction: more focused lru and pcplists draining · fdaf7f5c
      Vlastimil Babka 提交于
      The goal of memory compaction is to create high-order freepages through
      page migration.  Page migration however puts pages on the per-cpu lru_add
      cache, which is later flushed to per-cpu pcplists, and only after pcplists
      are drained the pages can actually merge.  This can happen due to the
      per-cpu caches becoming full through further freeing, or explicitly.
      
      During direct compaction, it is useful to do the draining explicitly so
      that pages merge as soon as possible and compaction can detect success
      immediately and keep the latency impact at minimum.  However the current
      implementation is far from ideal.  Draining is done only in
      __alloc_pages_direct_compact(), after all zones were already compacted,
      and the decisions to continue or stop compaction in individual zones was
      done without the last batch of migrations being merged.  It is also
      missing the draining of lru_add cache before the pcplists.
      
      This patch moves the draining for direct compaction into compact_zone().
      It adds the missing lru_cache draining and uses the newly introduced
      single zone pcplists draining to reduce overhead and avoid impact on
      unrelated zones.  Draining is only performed when it can actually lead to
      merging of a page of desired order (passed by cc->order).  This means it
      is only done when migration occurred in the previously scanned cc->order
      aligned block(s) and the migration scanner is now pointing to the next
      cc->order aligned block.
      
      The patch has been tested with stress-highalloc benchmark from mmtests.
      Although overal allocation success rates of the benchmark were not
      affected, the number of detected compaction successes has doubled.  This
      suggests that allocations were previously successful due to implicit
      merging caused by background activity, making a later allocation attempt
      succeed immediately, but not attributing the success to compaction.  Since
      stress-highalloc always tries to allocate almost the whole memory, it
      cannot show the improvement in its reported success rate metric.  However
      after this patch, compaction should detect success and terminate earlier,
      reducing the direct compaction latencies in a real scenario.
      Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Christoph Lameter <cl@linux.com>
      Acked-by: NRik van Riel <riel@redhat.com>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      fdaf7f5c
    • V
      mm, compaction: simplify deferred compaction · 97d47a65
      Vlastimil Babka 提交于
      Since commit 53853e2d ("mm, compaction: defer each zone individually
      instead of preferred zone"), compaction is deferred for each zone where
      sync direct compaction fails, and reset where it succeeds.  However, it
      was observed that for DMA zone compaction often appeared to succeed
      while subsequent allocation attempt would not, due to different outcome
      of watermark check.
      
      In order to properly defer compaction in this zone, the candidate zone
      has to be passed back to __alloc_pages_direct_compact() and compaction
      deferred in the zone after the allocation attempt fails.
      
      The large source of mismatch between watermark check in compaction and
      allocation was the lack of alloc_flags and classzone_idx values in
      compaction, which has been fixed in the previous patch.  So with this
      problem fixed, we can simplify the code by removing the candidate_zone
      parameter and deferring in __alloc_pages_direct_compact().
      
      After this patch, the compaction activity during stress-highalloc
      benchmark is still somewhat increased, but it's negligible compared to the
      increase that occurred without the better watermark checking.  This
      suggests that it is still possible to apparently succeed in compaction but
      fail to allocate, possibly due to parallel allocation activity.
      
      [akpm@linux-foundation.org: fix build]
      Suggested-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      97d47a65
    • V
      mm, compaction: pass classzone_idx and alloc_flags to watermark checking · ebff3980
      Vlastimil Babka 提交于
      Compaction relies on zone watermark checks for decisions such as if it's
      worth to start compacting in compaction_suitable() or whether compaction
      should stop in compact_finished().  The watermark checks take
      classzone_idx and alloc_flags parameters, which are related to the memory
      allocation request.  But from the context of compaction they are currently
      passed as 0, including the direct compaction which is invoked to satisfy
      the allocation request, and could therefore know the proper values.
      
      The lack of proper values can lead to mismatch between decisions taken
      during compaction and decisions related to the allocation request.  Lack
      of proper classzone_idx value means that lowmem_reserve is not taken into
      account.  This has manifested (during recent changes to deferred
      compaction) when DMA zone was used as fallback for preferred Normal zone.
      compaction_suitable() without proper classzone_idx would think that the
      watermarks are already satisfied, but watermark check in
      get_page_from_freelist() would fail.  Because of this problem, deferring
      compaction has extra complexity that can be removed in the following
      patch.
      
      The issue (not confirmed in practice) with missing alloc_flags is opposite
      in nature.  For allocations that include ALLOC_HIGH, ALLOC_HIGHER or
      ALLOC_CMA in alloc_flags (the last includes all MOVABLE allocations on
      CMA-enabled systems) the watermark checking in compaction with 0 passed
      will be stricter than in get_page_from_freelist().  In these cases
      compaction might be running for a longer time than is really needed.
      
      Another issue compaction_suitable() is that the check for "does the zone
      need compaction at all?" comes only after the check "does the zone have
      enough free free pages to succeed compaction".  The latter considers extra
      pages for migration and can therefore in some situations fail and return
      COMPACT_SKIPPED, although the high-order allocation would succeed and we
      should return COMPACT_PARTIAL.
      
      This patch fixes these problems by adding alloc_flags and classzone_idx to
      struct compact_control and related functions involved in direct compaction
      and watermark checking.  Where possible, all other callers of
      compaction_suitable() pass proper values where those are known.  This is
      currently limited to classzone_idx, which is sometimes known in kswapd
      context.  However, the direct reclaim callers should_continue_reclaim()
      and compaction_ready() do not currently know the proper values, so the
      coordination between reclaim and compaction may still not be as accurate
      as it could.  This can be fixed later, if it's shown to be an issue.
      
      Additionaly the checks in compact_suitable() are reordered to address the
      second issue described above.
      
      The effect of this patch should be slightly better high-order allocation
      success rates and/or less compaction overhead, depending on the type of
      allocations and presence of CMA.  It allows simplifying deferred
      compaction code in a followup patch.
      
      When testing with stress-highalloc, there was some slight improvement
      (which might be just due to variance) in success rates of non-THP-like
      allocations.
      Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Christoph Lameter <cl@linux.com>
      Acked-by: NRik van Riel <riel@redhat.com>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ebff3980
    • Y
      mm: verify compound order when freeing a page · ab1f306f
      Yu Zhao 提交于
      This allows us to catch the bug fixed in the previous patch (mm: free
      compound page with correct order).
      
      Here we also verify whether a page is tail page or not -- tail pages are
      supposed to be freed along with their head, not by themselves.
      Signed-off-by: NYu Zhao <yuzhao@google.com>
      Reviewed-by: N"Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Bob Liu <lliubbo@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ab1f306f
    • V
      mm, cma: drain single zone pcplists · 510f5507
      Vlastimil Babka 提交于
      CMA allocation drains pcplists so that pages can merge back to buddy
      allocator.  Since it operates on a single zone, we can reduce the
      pcplists drain to the single zone, which is now possible.
      
      The change should make CMA allocations faster and not disturbing
      unrelated pcplists anymore.
      Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Xishi Qiu <qiuxishi@huawei.com>
      Cc: Vladimir Davydov <vdavydov@parallels.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      510f5507
    • V
      mm: introduce single zone pcplists drain · 93481ff0
      Vlastimil Babka 提交于
      The functions for draining per-cpu pages back to buddy allocators
      currently always operate on all zones.  There are however several cases
      where the drain is only needed in the context of a single zone, and
      spilling other pcplists is a waste of time both due to the extra
      spilling and later refilling.
      
      This patch introduces new zone pointer parameter to drain_all_pages()
      and changes the dummy parameter of drain_local_pages() to be also a zone
      pointer.  When NULL is passed, the functions operate on all zones as
      usual.  Passing a specific zone pointer reduces the work to the single
      zone.
      
      All callers are updated to pass the NULL pointer in this patch.
      Conversion to single zone (where appropriate) is done in further
      patches.
      Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Xishi Qiu <qiuxishi@huawei.com>
      Cc: Vladimir Davydov <vdavydov@parallels.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      93481ff0
    • A
  7. 14 11月, 2014 6 次提交
    • J
      mm/debug-pagealloc: correct freepage accounting and order resetting · 57cbc87e
      Joonsoo Kim 提交于
      One thing I did in this patch is fixing freepage accounting.  If we
      clear guard page and link it onto isolate buddy list, we should not
      increase freepage count.  This patch adds conditional branch to skip
      counting in this case.  Without this patch, this overcounting happens
      frequently if guard order is set and CMA is used.
      
      Another thing fixed in this patch is the target to reset order.  In
      __free_one_page(), we check the buddy page whether it is a guard page or
      not.  And, if so, we should clear guard attribute on the buddy page and
      reset order of it to 0.  But, current code resets original page's order
      rather than buddy one's.  Maybe, this doesn't have any problem, because
      whole merged page's order will be re-assigned soon.  But, it is better
      to correct code.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      57cbc87e
    • M
      mm: alloc_contig_range: demote pages busy message from warn to info · dae803e1
      Michal Nazarewicz 提交于
      Having test_pages_isolated failure message as a warning confuses users
      into thinking that it is more serious than it really is.  In reality, if
      called via CMA, allocation will be retried so a single
      test_pages_isolated failure does not prevent allocation from succeeding.
      
      Demote the warning message to an info message and reformat it such that
      the text "failed" does not appear and instead a less worrying "PFNS
      busy" is used.
      
      This message is trivially reproducible on a 10GB x86 machine on 3.16.y
      kernels configured with CONFIG_DMA_CMA.
      Signed-off-by: NMichal Nazarewicz <mina86@mina86.com>
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Cc: Peter Hurley <peter@hurleysoftware.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      dae803e1
    • J
      mm/page_alloc: restrict max order of merging on isolated pageblock · 3c605096
      Joonsoo Kim 提交于
      Current pageblock isolation logic could isolate each pageblock
      individually.  This causes freepage accounting problem if freepage with
      pageblock order on isolate pageblock is merged with other freepage on
      normal pageblock.  We can prevent merging by restricting max order of
      merging to pageblock order if freepage is on isolate pageblock.
      
      A side-effect of this change is that there could be non-merged buddy
      freepage even if finishing pageblock isolation, because undoing
      pageblock isolation is just to move freepage from isolate buddy list to
      normal buddy list rather than to consider merging.  So, the patch also
      makes undoing pageblock isolation consider freepage merge.  When
      un-isolation, freepage with more than pageblock order and it's buddy are
      checked.  If they are on normal pageblock, instead of just moving, we
      isolate the freepage and free it in order to get merged.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Laura Abbott <lauraa@codeaurora.org>
      Cc: Heesub Shin <heesub.shin@samsung.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Ritesh Harjani <ritesh.list@gmail.com>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3c605096
    • J
      mm/page_alloc: move freepage counting logic to __free_one_page() · 8f82b55d
      Joonsoo Kim 提交于
      All the caller of __free_one_page() has similar freepage counting logic,
      so we can move it to __free_one_page().  This reduce line of code and
      help future maintenance.
      
      This is also preparation step for "mm/page_alloc: restrict max order of
      merging on isolated pageblock" which fix the freepage counting problem
      on freepage with more than pageblock order.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Laura Abbott <lauraa@codeaurora.org>
      Cc: Heesub Shin <heesub.shin@samsung.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Ritesh Harjani <ritesh.list@gmail.com>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8f82b55d
    • J
      mm/page_alloc: add freepage on isolate pageblock to correct buddy list · 51bb1a40
      Joonsoo Kim 提交于
      In free_pcppages_bulk(), we use cached migratetype of freepage to
      determine type of buddy list where freepage will be added.  This
      information is stored when freepage is added to pcp list, so if
      isolation of pageblock of this freepage begins after storing, this
      cached information could be stale.  In other words, it has original
      migratetype rather than MIGRATE_ISOLATE.
      
      There are two problems caused by this stale information.
      
      One is that we can't keep these freepages from being allocated.
      Although this pageblock is isolated, freepage will be added to normal
      buddy list so that it could be allocated without any restriction.  And
      the other problem is incorrect freepage accounting.  Freepages on
      isolate pageblock should not be counted for number of freepage.
      
      Following is the code snippet in free_pcppages_bulk().
      
          /* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */
          __free_one_page(page, page_to_pfn(page), zone, 0, mt);
          trace_mm_page_pcpu_drain(page, 0, mt);
          if (likely(!is_migrate_isolate_page(page))) {
              __mod_zone_page_state(zone, NR_FREE_PAGES, 1);
              if (is_migrate_cma(mt))
                  __mod_zone_page_state(zone, NR_FREE_CMA_PAGES, 1);
          }
      
      As you can see above snippet, current code already handle second
      problem, incorrect freepage accounting, by re-fetching pageblock
      migratetype through is_migrate_isolate_page(page).
      
      But, because this re-fetched information isn't used for
      __free_one_page(), first problem would not be solved.  This patch try to
      solve this situation to re-fetch pageblock migratetype before
      __free_one_page() and to use it for __free_one_page().
      
      In addition to move up position of this re-fetch, this patch use
      optimization technique, re-fetching migratetype only if there is isolate
      pageblock.  Pageblock isolation is rare event, so we can avoid
      re-fetching in common case with this optimization.
      
      This patch also correct migratetype of the tracepoint output.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: NMinchan Kim <minchan@kernel.org>
      Acked-by: NMichal Nazarewicz <mina86@mina86.com>
      Acked-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Laura Abbott <lauraa@codeaurora.org>
      Cc: Heesub Shin <heesub.shin@samsung.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Ritesh Harjani <ritesh.list@gmail.com>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      51bb1a40
    • J
      mm/page_alloc: fix incorrect isolation behavior by rechecking migratetype · ad53f92e
      Joonsoo Kim 提交于
      Before describing bugs itself, I first explain definition of freepage.
      
       1. pages on buddy list are counted as freepage.
       2. pages on isolate migratetype buddy list are *not* counted as freepage.
       3. pages on cma buddy list are counted as CMA freepage, too.
      
      Now, I describe problems and related patch.
      
      Patch 1: There is race conditions on getting pageblock migratetype that
      it results in misplacement of freepages on buddy list, incorrect
      freepage count and un-availability of freepage.
      
      Patch 2: Freepages on pcp list could have stale cached information to
      determine migratetype of buddy list to go.  This causes misplacement of
      freepages on buddy list and incorrect freepage count.
      
      Patch 4: Merging between freepages on different migratetype of
      pageblocks will cause freepages accouting problem.  This patch fixes it.
      
      Without patchset [3], above problem doesn't happens on my CMA allocation
      test, because CMA reserved pages aren't used at all.  So there is no
      chance for above race.
      
      With patchset [3], I did simple CMA allocation test and get below
      result:
      
       - Virtual machine, 4 cpus, 1024 MB memory, 256 MB CMA reservation
       - run kernel build (make -j16) on background
       - 30 times CMA allocation(8MB * 30 = 240MB) attempts in 5 sec interval
       - Result: more than 5000 freepage count are missed
      
      With patchset [3] and this patchset, I found that no freepage count are
      missed so that I conclude that problems are solved.
      
      On my simple memory offlining test, these problems also occur on that
      environment, too.
      
      This patch (of 4):
      
      There are two paths to reach core free function of buddy allocator,
      __free_one_page(), one is free_one_page()->__free_one_page() and the
      other is free_hot_cold_page()->free_pcppages_bulk()->__free_one_page().
      Each paths has race condition causing serious problems.  At first, this
      patch is focused on first type of freepath.  And then, following patch
      will solve the problem in second type of freepath.
      
      In the first type of freepath, we got migratetype of freeing page
      without holding the zone lock, so it could be racy.  There are two cases
      of this race.
      
       1. pages are added to isolate buddy list after restoring orignal
          migratetype
      
          CPU1                                   CPU2
      
          get migratetype => return MIGRATE_ISOLATE
          call free_one_page() with MIGRATE_ISOLATE
      
                                      grab the zone lock
                                      unisolate pageblock
                                      release the zone lock
      
          grab the zone lock
          call __free_one_page() with MIGRATE_ISOLATE
          freepage go into isolate buddy list,
          although pageblock is already unisolated
      
      This may cause two problems.  One is that we can't use this page anymore
      until next isolation attempt of this pageblock, because freepage is on
      isolate buddy list.  The other is that freepage accouting could be wrong
      due to merging between different buddy list.  Freepages on isolate buddy
      list aren't counted as freepage, but ones on normal buddy list are
      counted as freepage.  If merge happens, buddy freepage on normal buddy
      list is inevitably moved to isolate buddy list without any consideration
      of freepage accouting so it could be incorrect.
      
       2. pages are added to normal buddy list while pageblock is isolated.
          It is similar with above case.
      
      This also may cause two problems.  One is that we can't keep these
      freepages from being allocated.  Although this pageblock is isolated,
      freepage would be added to normal buddy list so that it could be
      allocated without any restriction.  And the other problem is same as
      case 1, that it, incorrect freepage accouting.
      
      This race condition would be prevented by checking migratetype again
      with holding the zone lock.  Because it is somewhat heavy operation and
      it isn't needed in common case, we want to avoid rechecking as much as
      possible.  So this patch introduce new variable, nr_isolate_pageblock in
      struct zone to check if there is isolated pageblock.  With this, we can
      avoid to re-check migratetype in common case and do it only if there is
      isolated pageblock or migratetype is MIGRATE_ISOLATE.  This solve above
      mentioned problems.
      
      Changes from v3:
      Add one more check in free_one_page() that checks whether migratetype is
      MIGRATE_ISOLATE or not. Without this, abovementioned case 1 could happens.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: NMinchan Kim <minchan@kernel.org>
      Acked-by: NMichal Nazarewicz <mina86@mina86.com>
      Acked-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Laura Abbott <lauraa@codeaurora.org>
      Cc: Heesub Shin <heesub.shin@samsung.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Ritesh Harjani <ritesh.list@gmail.com>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ad53f92e
  8. 27 10月, 2014 1 次提交
    • V
      cpuset: simplify cpuset_node_allowed API · 344736f2
      Vladimir Davydov 提交于
      Current cpuset API for checking if a zone/node is allowed to allocate
      from looks rather awkward. We have hardwall and softwall versions of
      cpuset_node_allowed with the softwall version doing literally the same
      as the hardwall version if __GFP_HARDWALL is passed to it in gfp flags.
      If it isn't, the softwall version may check the given node against the
      enclosing hardwall cpuset, which it needs to take the callback lock to
      do.
      
      Such a distinction was introduced by commit 02a0e53d ("cpuset:
      rework cpuset_zone_allowed api"). Before, we had the only version with
      the __GFP_HARDWALL flag determining its behavior. The purpose of the
      commit was to avoid sleep-in-atomic bugs when someone would mistakenly
      call the function without the __GFP_HARDWALL flag for an atomic
      allocation. The suffixes introduced were intended to make the callers
      think before using the function.
      
      However, since the callback lock was converted from mutex to spinlock by
      the previous patch, the softwall check function cannot sleep, and these
      precautions are no longer necessary.
      
      So let's simplify the API back to the single check.
      Suggested-by: NDavid Rientjes <rientjes@google.com>
      Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
      Acked-by: NChristoph Lameter <cl@linux.com>
      Acked-by: NZefan Li <lizefan@huawei.com>
      Signed-off-by: NTejun Heo <tj@kernel.org>
      344736f2
  9. 22 10月, 2014 1 次提交
    • M
      OOM, PM: OOM killed task shouldn't escape PM suspend · 5695be14
      Michal Hocko 提交于
      PM freezer relies on having all tasks frozen by the time devices are
      getting frozen so that no task will touch them while they are getting
      frozen. But OOM killer is allowed to kill an already frozen task in
      order to handle OOM situtation. In order to protect from late wake ups
      OOM killer is disabled after all tasks are frozen. This, however, still
      keeps a window open when a killed task didn't manage to die by the time
      freeze_processes finishes.
      
      Reduce the race window by checking all tasks after OOM killer has been
      disabled. This is still not race free completely unfortunately because
      oom_killer_disable cannot stop an already ongoing OOM killer so a task
      might still wake up from the fridge and get killed without
      freeze_processes noticing. Full synchronization of OOM and freezer is,
      however, too heavy weight for this highly unlikely case.
      
      Introduce and check oom_kills counter which gets incremented early when
      the allocator enters __alloc_pages_may_oom path and only check all the
      tasks if the counter changes during the freezing attempt. The counter
      is updated so early to reduce the race window since allocator checked
      oom_killer_disabled which is set by PM-freezing code. A false positive
      will push the PM-freezer into a slow path but that is not a big deal.
      
      Changes since v1
      - push the re-check loop out of freeze_processes into
        check_frozen_processes and invert the condition to make the code more
        readable as per Rafael
      
      Fixes: f660daac (oom: thaw threads if oom killed thread is frozen before deferring)
      Cc: 3.2+ <stable@vger.kernel.org> # 3.2+
      Signed-off-by: NMichal Hocko <mhocko@suse.cz>
      Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      5695be14
  10. 10 10月, 2014 6 次提交
    • S
      mm: move debug code out of page_alloc.c · 82742a3a
      Sasha Levin 提交于
      dump_page() and dump_vma() are not specific to page_alloc.c, move them out
      so page_alloc.c won't turn into the unofficial debug repository.
      Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      82742a3a
    • M
      mm: page_alloc: default node-ordering on 64-bit NUMA, zone-ordering on 32-bit · 3193913c
      Mel Gorman 提交于
      Zones are allocated by the page allocator in either node or zone order.
      Node ordering is preferred in terms of locality and is applied
      automatically in one of three cases:
      
        1. If a node has only low memory
      
        2. If DMA/DMA32 is a high percentage of memory
      
        3. If low memory on a single node is greater than 70% of the node size
      
      Otherwise zone ordering is used to preserve low memory for devices that
      require it.  Unfortunately a consequence of this is that applications
      running on a machine with balanced NUMA nodes will experience different
      performance characteristics depending on which node they happen to start
      from.
      
      The point of zone ordering is to protect lower zones for devices that
      require DMA/DMA32 memory.  When NUMA was first introduced, this was
      critical as 32-bit NUMA machines existed and exhausting low memory
      triggered OOMs easily as so many allocations required low memory.  On
      64-bit machines the primary concern is devices that are 32-bit only which
      is less severe than the low memory exhaustion problem on 32-bit NUMA.  It
      seems there are really few devices that depends on it.
      
      AGP -- I assume this is getting more rare but even then I think the allocations
      	happen early in boot time where lowmem pressure is less of a problem
      
      DRM -- If the device is 32-bit only then there may be low pressure. I didn't
      	evaluate these in detail but it looks like some of these are mobile
      	graphics card. Not many NUMA laptops out there. DRM folk should know
      	better though.
      
      Some TV cards -- Much demand for 32-bit capable TV cards on NUMA machines?
      
      B43 wireless card -- again not really a NUMA thing.
      
      I cannot find a good reason to incur a performance penalty on all 64-bit NUMA
      machines in case someone throws a brain damanged TV or graphics card in there.
      This patch defaults to node-ordering on 64-bit NUMA machines. I was tempted
      to make it default everywhere but I understand that some embedded arches may
      be using 32-bit NUMA where I cannot predict the consequences.
      
      The performance impact depends on the workload and the characteristics of the
      machine and the machine I tested on had a large Normal zone on node 0 so the
      impact is within the noise for the majority of tests. The allocation stats
      show more allocation requests were from DMA32 and local node. Running SpecJBB
      with multiple JVMs and automatic NUMA balancing disabled the results were
      
      specjbb
                           3.17.0-rc2            3.17.0-rc2
                              vanilla        nodeorder-v1r1
      Min    1      29534.00 (  0.00%)     30020.00 (  1.65%)
      Min    10    115717.00 (  0.00%)    134038.00 ( 15.83%)
      Min    19    109718.00 (  0.00%)    114186.00 (  4.07%)
      Min    28    104459.00 (  0.00%)    103639.00 ( -0.78%)
      Min    37     98245.00 (  0.00%)    103756.00 (  5.61%)
      Min    46     97198.00 (  0.00%)     96197.00 ( -1.03%)
      Mean   1      30953.25 (  0.00%)     31917.75 (  3.12%)
      Mean   10    124432.50 (  0.00%)    140904.00 ( 13.24%)
      Mean   19    116033.50 (  0.00%)    119294.75 (  2.81%)
      Mean   28    108365.25 (  0.00%)    106879.50 ( -1.37%)
      Mean   37    102984.75 (  0.00%)    106924.25 (  3.83%)
      Mean   46    100783.25 (  0.00%)    105368.50 (  4.55%)
      Stddev 1       1260.38 (  0.00%)      1109.66 ( 11.96%)
      Stddev 10      7434.03 (  0.00%)      5171.91 ( 30.43%)
      Stddev 19      8453.84 (  0.00%)      5309.59 ( 37.19%)
      Stddev 28      4184.55 (  0.00%)      2906.63 ( 30.54%)
      Stddev 37      5409.49 (  0.00%)      3192.12 ( 40.99%)
      Stddev 46      4521.95 (  0.00%)      7392.52 (-63.48%)
      Max    1      32738.00 (  0.00%)     32719.00 ( -0.06%)
      Max    10    136039.00 (  0.00%)    148614.00 (  9.24%)
      Max    19    130566.00 (  0.00%)    127418.00 ( -2.41%)
      Max    28    115404.00 (  0.00%)    111254.00 ( -3.60%)
      Max    37    112118.00 (  0.00%)    111732.00 ( -0.34%)
      Max    46    108541.00 (  0.00%)    116849.00 (  7.65%)
      TPut   1     123813.00 (  0.00%)    127671.00 (  3.12%)
      TPut   10    497730.00 (  0.00%)    563616.00 ( 13.24%)
      TPut   19    464134.00 (  0.00%)    477179.00 (  2.81%)
      TPut   28    433461.00 (  0.00%)    427518.00 ( -1.37%)
      TPut   37    411939.00 (  0.00%)    427697.00 (  3.83%)
      TPut   46    403133.00 (  0.00%)    421474.00 (  4.55%)
      
                                  3.17.0-rc2  3.17.0-rc2
                                     vanillanodeorder-v1r1
      DMA allocs                           0           0
      DMA32 allocs                        57     1491992
      Normal allocs                 32543566    30026383
      Movable allocs                       0           0
      Direct pages scanned                 0           0
      Kswapd pages scanned                 0           0
      Kswapd pages reclaimed               0           0
      Direct pages reclaimed               0           0
      Kswapd efficiency                 100%        100%
      Kswapd velocity                  0.000       0.000
      Direct efficiency                 100%        100%
      Direct velocity                  0.000       0.000
      Percentage direct scans             0%          0%
      Zone normal velocity             0.000       0.000
      Zone dma32 velocity              0.000       0.000
      Zone dma velocity                0.000       0.000
      THP fault alloc                  55164       52987
      THP collapse alloc                 139         147
      THP splits                          26          21
      NUMA alloc hit                 4169066     4250692
      NUMA alloc miss                      0           0
      
      Note that there were more DMA32 allocations with the patch applied.  In this
      particular case there was no difference in numa_hit and numa_miss. The
      expectation is that DMA32 was being used at the low watermark instead of
      falling into the slow path. kswapd was not woken but it's not worken for
      THP allocations.
      
      On 32-bit, this patch defaults to zone-ordering as low memory depletion
      can be a serious problem on 32-bit large memory machines. If the default
      ordering was node then processes on node 0 will deplete the Normal zone
      due to normal activity.  The problem is worse if CONFIG_HIGHPTE is not
      set. If combined with large amounts of dirty/writeback pages in Normal
      zone then there is also a high risk of OOM. The heuristics are removed
      as it's not clear they were ever important on 32-bit. They were only
      relevant for setting node-ordering on 64-bit.
      Signed-off-by: NMel Gorman <mgorman@suse.de>
      Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Fengguang Wu <fengguang.wu@intel.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3193913c
    • M
      mm: page_alloc: Make paranoid check in move_freepages a VM_BUG_ON · 97ee4ba7
      Mel Gorman 提交于
      Since 2.6.24 there has been a paranoid check in move_freepages that looks
      up the zone of two pages.  This is a very slow path and the only time I've
      seen this bug trigger recently is when memory initialisation was broken
      during patch development.  Despite the fact it's a slow path, this patch
      converts the check to a VM_BUG_ON anyway as it has served its purpose by
      now.
      Signed-off-by: NMel Gorman <mgorman@suse.de>
      Acked-by: NDavid Rientjes <rientjes@google.com>
      Acked-by: NRik van Riel <riel@redhat.com>
      Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      97ee4ba7
    • J
      mm: clean up zone flags · 57054651
      Johannes Weiner 提交于
      Page reclaim tests zone_is_reclaim_dirty(), but the site that actually
      sets this state does zone_set_flag(zone, ZONE_TAIL_LRU_DIRTY), sending the
      reader through layers indirection just to track down a simple bit.
      
      Remove all zone flag wrappers and just use bitops against zone->flags
      directly.  It's just as readable and the lines are barely any longer.
      
      Also rename ZONE_TAIL_LRU_DIRTY to ZONE_DIRTY to match ZONE_WRITEBACK, and
      remove the zone_flags_t typedef.
      Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
      Acked-by: NDavid Rientjes <rientjes@google.com>
      Acked-by: NMel Gorman <mgorman@suse.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      57054651
    • W
      mm: page_alloc: avoid wakeup kswapd on the unintended node · 7ade3c99
      Weijie Yang 提交于
      When entering the page_alloc slowpath, we wakeup kswapd on every pgdat
      according to the zonelist and high_zoneidx.  However, this doesn't take
      nodemask into account, and could prematurely wakeup kswapd on some
      unintended nodes.
      
      This patch uses for_each_zone_zonelist_nodemask() instead of
      for_each_zone_zonelist() in wake_all_kswapds() to avoid the above
      situation.
      Signed-off-by: NWeijie Yang <weijie.yang@samsung.com>
      Acked-by: NMel Gorman <mgorman@suse.de>
      Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7ade3c99
    • S
      mm: introduce dump_vma · 0bf55139
      Sasha Levin 提交于
      Introduce a helper to dump information about a VMA, this also makes
      dump_page_flags more generic and re-uses that so the output looks very
      similar to dump_page:
      
      [   61.903437] vma ffff88070f88be00 start 00007fff25970000 end 00007fff25992000
      [   61.903437] next ffff88070facd600 prev ffff88070face400 mm ffff88070fade000
      [   61.903437] prot 8000000000000025 anon_vma ffff88070fa1e200 vm_ops           (null)
      [   61.903437] pgoff 7ffffffdd file           (null) private_data           (null)
      [   61.909129] flags: 0x100173(read|write|mayread|maywrite|mayexec|growsdown|account)
      
      [akpm@linux-foundation.org: make dump_vma() require CONFIG_DEBUG_VM]
      [swarren@nvidia.com: fix dump_vma() compilation]
      Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
      Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Michal Hocko <mhocko@suse.cz>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Vlastimil Babka <vbabka@suse.cz>
      Cc: Michel Lespinasse <walken@google.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Signed-off-by: NStephen Warren <swarren@nvidia.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0bf55139