Simply replace proc_create and further data assigned with proc_create_data.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Acked-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simply replace proc_create and further data assigned with proc_create_data.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There was an obvious typo in LED structure
initialization which caused the radio and quality/activity
leds to be incorrectly initialized which resulted in
the leds not being enabled.

Additionally add the rt2x00led_led_activity() handler
that will enable TX/RX activity leds when the radio
is being enabled.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The timing settings for 1MBs should exclude
the short preamble bit since that only applies
to 2MBs, 5.5MBs and 11MBs.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

direct_mask will be set when we are not associated and requesting a
direct scan. The second debug print will be confusing as priv->essid
is not set at that time and it will thus print "<hidden>" while it is
known to which AP a direct scan is requested - as previous debug message
also indicates.

Now make all debugging consistent.
Signed-off-by: NBill Moss <bmoss@clemson.edu>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

All channels should be scanned, including the current channel
when the client is associated.

Removed also unused flag to scan only active channels.
Signed-off-by: NGuy Cohen <guy.cohen@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes some TX/RX related locking issues.
With this patch applied, some of the PHY transmission errors are fixed.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/8390.c:37:2: warning: returning void-valued expression
drivers/net/bnx2.c:1635:3: warning: returning void-valued expression
drivers/net/xen-netfront.c:1806:2: warning: returning void-valued expression
net/ipv4/tcp_hybla.c:105:3: warning: returning void-valued expression
net/ipv4/tcp_vegas.c:171:3: warning: returning void-valued expression
net/ipv4/tcp_veno.c:123:3: warning: returning void-valued expression
net/sysctl_net.c:85:2: warning: returning void-valued expression
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

(which is autogenerated by kbuild)
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ipv6: Compilation fix for compat MCAST_MSFILTER sockopts.

We have a race between fcntl() and close() that can lead to
dnotify_struct inserted into inode's list *after* the last descriptor
had been gone from current->files.

Since that's the only point where dnotify_struct gets evicted, we are
screwed - it will stick around indefinitely.  Even after struct file in
question is gone and freed.  Worse, we can trigger send_sigio() on it at
any later point, which allows to send an arbitrary signal to arbitrary
process if we manage to apply enough memory pressure to get the page
that used to host that struct file and fill it with the right pattern...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

So Ingo finally did figure out why UML broke with this option: UML
passes gcc the -fno-unit-at-a-time flag, and apparently that wreaks
havoc with gcc's inlining.

We could turn off -fno-unit-at-a-time for UML for gcc4+ (which is what
x86 does), but there's bad blood about this whole option, and it does
show that the thing is just fragile as heck.

So let tempers cool, and disable the thing, and we can revisit the
decision later.

Cc: Adrian Bunk <bunk@kernel.org>
Cc: David Miller <davem@davemloft.net>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes3: (21 commits)
  x86: numaq fix
  x86: 8K stacks by default
  x86: ioremap ram check fix
  x86: fix HT cpu booting on 32-bit
  x86: optimize inlining off
  x86: CONFIG_X86_ELAN fix
  x86: Kconfig fix
  x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()
  x86: use defconfigs from x86/configs/*
  toshiba: use ioremap_cached
  revert: "x86: ioremap(), extend check to all RAM pages"
  x86: don't bother printing compat vdso address
  fix: x86: support for new UV apic
  x86: fix early-BUG message
  x86: iommu_sac_force can become static
  x86: add proper header for reboot_force
  x86 VISWS: build fix
  x86, voyager: fix ioremap_nocache()
  hpet: fix
  x86: unexport kmap_atomic_to_page
  ...

According to Coverity (kudo's to Adrian Bunk), we had one use-before-check
bug in libe libertas driver. This patch fixes this issue.
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes operation of dual-PHY (A/B/G) devices.
Do not anounce the A-PHY to mac80211, as that's not supported, yet.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Looks like  5d2cdcd4 ("mac80211: get a
TKIP phase key from skb") got the shifts wrong.

Noticed by sparse:
net/mac80211/tkip.c:234:25: warning: right shift by bigger than source value
net/mac80211/tkip.c:235:25: warning: right shift by bigger than source value
net/mac80211/tkip.c:236:25: warning: right shift by bigger than source value
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This reorders the open code so that WDS peer STA info entries
are added after the corresponding interface is added to the
driver so that driver callbacks aren't invoked out of order.
Also make any master device startup fatal.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Rather than just disallowing the zero address, disallow all
invalid ones.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Drivers can rightfully assume that they get a beacon_control
if the beacon is set.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This follows the new 802.11s/D2.0 draft.
Signed-off-by: NLuis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  klist: fix coding style errors in klist.h and klist.c
  driver core: remove no longer used "struct class_device"
  pcmcia: remove pccard_sysfs_interface warnings
  devres: support addresses greater than an unsigned long via dev_ioremap
  kobject: do not copy vargs, just pass them around
  sysfs: sysfs_update_group stub for CONFIG_SYSFS=n
  DEBUGFS: Correct location of debugfs API documentation.
  driver core: warn about duplicate driver names on the same bus
  klist: implement klist_add_{after|before}()
  klist: implement KLIST_INIT() and DEFINE_KLIST()
  sysfs: Disallow truncation of files in sysfs

Finally clean up the odd spacing in these files.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make the PCMCIA core stop using class_interface to hide socket attribute
registration.  This removes the associated section mismatch warnings, and
helps get to the point where that mechanism can finally be removed.

Simplify that attribute registration by using an attribute_group.
This is a net shrink in object size.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use a resource_size_t instead of unsigned long since some arch's are
capable of having ioremap deal with addresses greater than the size of a
unsigned long.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This prevents a few unneeded copies.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

scsi_transport_spi uses sysfs_update_group() when CONFIG_SYSFS=n,
so provide a stub for it.

next-20080423/drivers/scsi/scsi_transport_spi.c:1467: error: implicit declaration of function 'sysfs_update_group'
make[3]: *** [drivers/scsi/scsi_transport_spi.o] Error 1
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently an attempt to register multiple
drivers with the same name causes the
stack trace with some cryptic error message.
The attached patch adds the necessary check
and the clear error message.
Signed-off-by: NStas Sergeev <stsp@aknet.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add klist_add_after() and klist_add_before() which puts a new node
after and before an existing node, respectively.  This is useful for
callers which need to keep klist ordered.  Note that synchronizing
between simultaneous additions for ordering is the caller's
responsibility.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

klist is missing static initializers and definition helper.  Add them.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

sysfs allows attribute files to be truncated, e.g. using ftruncate(), with the
expected effect on their inode.   For most attributes, this doesn't change the
"real" size of the file i.e. how much can be read from it.  However, the
parameter validation for reading and writing binary attribute files is based
on the inode size and not the size specified in the file's bin_attribute, so it
can be broken by this. For example, if we try using dd to write to such a file:

# pwd
/sys/bus/pci/devices/0000:08:00.0
# ls -l config
-rw-r--r--  1 root root 4096 Feb  1 17:35 config
# dd if=/dev/zero of=config bs=4 count=1
1+0 records in
1+0 records out
# ls -l config
-rw-r--r--  1 root root 0 Feb  1 17:50 config
# dd if=/dev/zero of=config bs=4 count=1 seek=128
dd: writing `config': No space left on device
1+0 records in
0+0 records out

Also, after truncation to 0, parameter validation for read and write is
disabled.  Most bin_attribute read and write methods also validate the size and
offset, but for some this will allow out-of-range access.  This may be a
security issue, though access to such files is often limited to root.  In any
case, the validation should remain for safety's sake!)

This was previously reported in Bugzilla as bug 9867.

sysfs should ignore size changes or else refuse them (by returning -EINVAL).
This patch makes it ignore them.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

acpi_device_dir() is NULL until all files are createst, so everyting is
created in straight in /proc/ and creation code warns.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The last hunk from the commit dae50295 (ipv4/ipv6 compat: Fix SSM
applications on 64bit kernels.) escaped from the compat_ipv6_setsockopt
to the ipv6_getsockopt (I guess due to patch smartness wrt searching
for context) thus breaking 32-bit and 64-bit-without-compat compilation.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Acked-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

do not override the existing pci-y rule when adding visws or
numaq rules.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Switch back to 8K stacks as the safer default. Out-of-memory
situations are less problematic than silent and hard to debug
stack corruption.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

bdd3cee2 (x86: ioremap(), extend check
to all RAM pages) breaks OLPC's ioremap call.  The ioremap that OLPC uses is:

        romsig = ioremap(0xffffffc0, 16);

The commit that breaks it is basically:

-       for (pfn = phys_addr >> PAGE_SHIFT; pfn < max_pfn_mapped &&
-            (pfn << PAGE_SHIFT) < last_addr; pfn++) {
+       for (pfn = phys_addr >> PAGE_SHIFT;
+                               (pfn << PAGE_SHIFT) < last_addr; pfn++) {
+

Previously, the 'pfn < max_pfn_mapped' check would've caused us to not
enter the loop.  Removing that check means we loop infinitely.  The
reason for that is because pfn is 0xfffff, and last_addr is 0xffffffcf.
The remaining check that is used to exit the loop is not sufficient;
when pfn<<PAGE_SHIFT is 0xfffff000, that is less than 0xffffffcf; when
we increment pfn and it overflows (pfn == 0x100000), pfn<<PAGE_SHIFT
ends up being 0.  That, of course, is less than last_addr.  In effect,
pfn<<PAGE_SHIFT is never lower than last_addr.

The simple fix for this is to limit the last_addr check to the PAGE_MASK;
a patch is below.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>