With this patch when ncurses-devel (or whatever it is named)
is missing trying to run menuconfig will result in this:

$ make menuconfig
  HOSTCC  scripts/kconfig/conf.o
  HOSTCC  scripts/kconfig/kxgettext.o
 *** Unable to find the ncurses libraries or the
 *** required header files.
 *** 'make menuconfig' requires the ncurses libraries.
 ***
 *** Install ncurses (ncurses-devel) and try again.
 ***
make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1
make: *** [menuconfig] Error 2

Much better than before where we just listed some build errors.
The other *config targets will work indepenednt on ncurses
being present or not.

Includes improvements suggested by: Frans Pop <elendil@planet.nl>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Frans Pop <elendil@planet.nl>

When multiple built-in modules (especially drivers) provide the same
capability, they're prioritized by link order specified by the order
listed in Makefile.  This implicit ordering is lost for loadable
modules.

When driver modules are loaded by udev, what comes first in
modules.alias file is selected.  However, the order in this file is
indeterministic (depends on filesystem listing order of installed
modules).  This causes confusion.

The solution is two-parted.  This patch updates kbuild such that it
generates and installs modules.order which contains the name of
modules ordered according to Makefile.  The second part is update to
depmod such that it generates output files according to this file.

Note that both obj-y and obj-m subdirs can contain modules and
ordering information between those two are lost from beginning.
Currently obj-y subdirs are put before obj-m subdirs.

Sam Ravnborg cleaned up Makefile modifications and suggested using awk
to remove duplicate lines from modules.order instead of using separate
C program.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Cc: Bill Nottingham <notting@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jon Masters <jonathan@jonmasters.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This patch converts drivers/base/power/Makefile to use ccflags instead
of EXTRA_CFLAGS.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Add missing $(srctree)/ prefix for scripts used by the includecheck and
versioncheck make targets
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Add 'includecheck' to the Static analyzers help list.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The !P directive includes the contents of a DOC: section
given by title, e.g.
!Pfilename Title of the section
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

When asked by a template to include all functions from a file,
it will also include DOC: sections wreaking havoc in the generated
docbook file. This patch makes it use the new -no-doc-sections
flag for kernel-doc to avoid this.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This flag is necessary for the next patch for docproc to output
only the functions and not DOC: sections when a function list
is requested.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Currently, DOC: sections are always output even if only a single
function is requested, fix this and also make it possible to just
output a single DOC: section by giving its title as the function
name to output.

Also fixes docbook XML well-formedness for sections with examples.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The kernel-doc script triggers a perl warning when invoked
without KERNELVERSION in the environment, rather make it use
the string "unknown kernel version" instead.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

After Randy's patch fixing the HTML output in DOC: sections
(6b5b55f6) the same bug remained in XML
mode, this fixes it.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] constify function pointer tables
  [WATCHDOG] TXx9 watchdog driver
  [WATCHDOG] misc_register patch	
  [WATCHDOG] wdt: fix locking

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (197 commits)
  sh: add spi header and r2d platform data V3
  sh: update r7780rp interrupt code
  sh: remove consistent alloc stuff from the machine vector
  sh: use declared coherent memory for dreamcast pci ethernet adapter
  sh: declared coherent memory support V2
  sh: Add support for SDK7780 board.
  sh: constify function pointer tables
  sh: Kill off -traditional for linker script.
  cdrom: Add support for Sega Dreamcast GD-ROM.
  sh: Kill off hs7751rvoip reference from arch/sh/Kconfig.
  sh: Drop r7780rp_defconfig, use r7780mp_defconfig as kbuild default.
  sh: Kill off dead HS771RVoIP board support.
  sh: r7785rp: Fix up DECLARE_INTC_DESC() arg mismatch.
  sh: r7785rp: Hook up the rest of the HL7785 FPGA IRQ vectors.
  sh: r2d - enable sm501 usb host function
  sh: remove voyagergx
  sh: r2d - add lcd planel timings to sm501 platform data
  sh: Add OHCI and UDC platform devices for SH7720.
  sh: intc - remove default interrupt priority tables
  sh: Correct pte size mismatch for X2 TLB.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (24 commits)
  HID: ADS/Tech Radio si470x needs blacklist entry
  HID: Logitech Extreme 3D needs NOGET quirk
  HID: Refactor MS Presenter 8K key mapping
  HID: MS Presenter mapping for PID 0x0701
  HID: Support Samsung IR remote
  HID: fix compilation of hidbp drivers without usbhid
  HID: Blacklist the Gretag-Macbeth Huey display colorimeter
  HID: the `bit' in hidinput_mapping_quirks() is an out parameter
  HID: remove redundant WARN_ON()s in order not to scare users
  HID: force hiddev creation for SONY PS3 controller
  HID: Use hid blacklist in usbmouse/usbkbd
  HID: proper handling of MS 4k and 6k devices
  HID: remove unused variable in quirk event handler
  HID: hid-input quirk for BTC 8193
  HID: separate hid-input event quirks from generic code
  HID: refactor mapping to input subsystem for quirky devices
  HID: Microsoft Wireless Optical Desktop 3.0 quirk
  HID: Add support for Logitech Elite keyboards
  HID: add full support for Genius KB-29E
  HID: fix a potential bug in pointer casting
  ...

* 'for-2.6.25' of git://git.kernel.dk/linux-2.6-block:
  block: implement drain buffers
  __bio_clone: don't calculate hw/phys segment counts
  block: allow queue dma_alignment of zero
  blktrace: Add blktrace ioctls to SCSI generic devices

* 'blk-end-request' of git://git.kernel.dk/linux-2.6-block: (30 commits)
  blk_end_request: changing xsysace (take 4)
  blk_end_request: changing ub (take 4)
  blk_end_request: cleanup of request completion (take 4)
  blk_end_request: cleanup 'uptodate' related code (take 4)
  blk_end_request: remove/unexport end_that_request_* (take 4)
  blk_end_request: changing scsi (take 4)
  blk_end_request: add bidi completion interface (take 4)
  blk_end_request: changing ide-cd (take 4)
  blk_end_request: add callback feature (take 4)
  blk_end_request: changing ide normal caller (take 4)
  blk_end_request: changing cpqarray (take 4)
  blk_end_request: changing cciss (take 4)
  blk_end_request: changing ide-scsi (take 4)
  blk_end_request: changing s390 (take 4)
  blk_end_request: changing mmc (take 4)
  blk_end_request: changing i2o_block (take 4)
  blk_end_request: changing viocd (take 4)
  blk_end_request: changing xen-blkfront (take 4)
  blk_end_request: changing viodasd (take 4)
  blk_end_request: changing sx8 (take 4)
  ...

* 'sg' of git://git.kernel.dk/linux-2.6-block:
  SG: work with the SCSI fixed maximum allocations.
  SG: Convert SCSI to use scatterlist helpers for sg chaining
  SG: Move functions to lib/scatterlist.c and add sg chaining allocator helpers

* 'cfq-ioc-share' of git://git.kernel.dk/linux-2.6-block:
  cfq-iosched: kill some big inlines
  cfq-iosched: relax IOPRIO_CLASS_IDLE restrictions
  kernel: add CLONE_IO to specifically request sharing of IO contexts
  io_context sharing - anticipatory changes
  block: cfq: make the io contect sharing lockless
  io_context sharing - cfq changes
  io context sharing: preliminary support
  ioprio: move io priority from task_struct to io_context

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (176 commits)
  [ARM] 4795/1: S3C244X: Add armclk and setparent call
  [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
  [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
  [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
  [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
  [ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
  [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
  [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.
  [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number
  [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
  [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
  [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
  [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
  [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
  [ARM] 4781/1: S3C24XX: DMA suspend and resume support
  [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
  [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
  [ARM] 4778/1: S3C2412: Add armclk and init from DVS state
  [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
  [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
  ...

The documentation for ata_data_xfer and ata_data_xfer_noirq had the 'rw'
parameter named 'write_data'.
Signed-off-by: NLinus Nilsson <lajnold@acc.umu.se>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds blacklist entries in hid-quirks.c to let the usbhid driver
ignore the si470x radio devices. They are now handled by the new radio-si470x
driver.
Signed-off-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Logitech Extreme 3D needs NOGET quirk, otherwise it times out at
the time of connect.
Reported-by: NMike Sharov <msharov@softhome.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Following the suggestion of Jonas, this patch maps the special keys of
the MS Presenter 8000 to targets that should allow for better re-mapping
according to individual use cases (i.e. I avoided hard-wiring to
standard keys). This time I also included the last missing key event
(switching back from presentation mode).

The optimal Xmodmap customization for using the Presenter with
OpenOffice now looks like this for me:

keycode 175 = Escape
keycode 179 = F5
keysym XF86Forward = Right
keysym XF86Back = Left
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

0x045e/0x0701 also needs the hid-input mapping quirk established by
quirk_microsoft_presenter_8k().
Reported-by: NJonas Delrue <jonas_delrue@hotmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Samsung USB remotes (0419:0001) are rejected by kernel 2.6.23, because the
report descriptor from the remote contains a 48 bit HID report field. HID 1.11
states: Fields may span at most 4 bytes.

This patch, based on 2.6.23, fixes this by modifying the internal report
descriptor in hid-quirks.c. Additional user space support (e.g. LIRC) is
required to fetch the information from the hiddev interface.

The burden to reconstruct the data is moved into userspace (lirc through hiddev).
There is no need to set HID_QUIRK_HIDDEV quirk, as the device has also output
applications, which trigger the creation of hiddev device automatically.
Signed-off-by: NRobert Schedel <r.schedel@yahoo.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

We can use the blacklist only if usbhid code is compiled.
Reported-by: Njurriaan <thunder7@xs4all.nl>
Cc: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Gretag-Macbeth Huey display colorimeter claims to be an HID device but
isn't. As a result the linux HID device will claim it, preventing FLOSS
software like Argyll CMS from talking to it.
Tested-by: NFrederic Crozat <fcrozat@mandriva.com>
Signed-off-by: NNicolas Mailhot <nicolas.mailhot@laposte.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix a panic, by changing
	hidinput_mapping_quirks(,, unsigned long *bit,)
to
	hidinput_mapping_quirks(,, unsigned long **bit,)

The `bit' in this function is an out parameter.
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The WARN_ON() in implement() and extract() spit out stacktraces and
a lot of other information that might make users think that there is
something seriously wrong with the system. WARN_ON() should not be
deliberately triggerable by userspace application, which these can be.
Usually this WARN_ON() triggers when hid2hci utility is sending the
data that don't correspond to the device's report descriptor.

Convert these messages to more friendly printk().
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The device is not discoverable, and needs to be poked to set its master, the
Bluetooth device it will try to connect to when the "Home" button is pressed
without a cable plugged in.

Using libusb means disconnecting the device from its driver to get the report
descriptor. Using hiddev, we can poke it without relinquishing control over it,
so when you plug it in, it would still work as a pad.

This could be then used by sixpair program, after it is rewritten to use
hiddev instead of libusb.
Signed-off-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This fixes wacom tablets not working if usbmouse is loaded.
Signed-off-by: NPascal Terjan <pterjan@mandriva.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This removes ugly macros IS_* to distinguish devices that
need special handling in hid-input, and establish proper
quirks for them.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Remove unused variable in quirk event handler.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

BTC 8193 keyboard handles its scrollwheel in very non-standard way.
It produces two non-standard usages for scrolling up and down, in
both cases with postive value equaling to 1. We handle this by temporary
mapping, which we then catch in quirk event handler, and remap to
negative HWHEEL even in order to introduce correct behavior.

Also the button requires special mapping, as it triggers standard-violating
usage code.

Reported in kernel.org bugzilla #9385
Reported-by: NKir Kolyshkin <kir@sacred.ru>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch separates also the hid-input quirks that have to be
applied at the time the event occurs, so that the generic code
handling HUT-compliant devices is not messed up by them too much.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Currently, the handling of mapping between hid and input for devices
that don't conform to HUT 1.12 specification is very messy -- no per-device
handling, no blacklists, conditions on idVendor and idProduct placed
all over the code.

This patch moves all the device-specific input mapping to a separate
file, and introduces a blacklist-style handling for non-standard
device-specific mappings.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Make the Microsoft Wireless Optical Desktop 3.0 work as a mouse.

Microsoft Wireless Optical Desktop 3.0 doesn't properly describe its interface
class.  Specifically, since it doesn't mark the second interface as a mouse
(bInterfaceSubclass = 0), it doesn't get HID_QUIRK_NOGET applied to the
interface, and then acts broken when polled.
Signed-off-by: NDrew Fisher <drew.m.fisher@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Reuse the quirks from the Cordless Desktop LX500 - stops some of the extra
keys being reported as mouse buttons.
Signed-off-by: NCarlos Corbacho <cathectic@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Genius KB-29E has broken report descriptor, which causes some of the
Consumer usages to appear incorrectly as Button usages. We fix it by
fixing the report descriptor before it is being parsed.

Also a few of the keys violate the HUT standard, so they need a special
handling. They currently fall into "Reserved" range as per HUT 1.12.
Reported-by: NSzekeres Istvan <szekeres@iii.hu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>