- 09 1月, 2014 1 次提交
-
-
由 Ivan Khoronzhuk 提交于
As we switch to use the watchdog core which permits more than one active watchdog in the system, rename platform driver to "davinci-wdt" to be identifiable. Acked-by: NWim Van Sebroeck <wim@iguana.be> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: NSekhar Nori <nsekhar@ti.com>
-
- 18 11月, 2013 1 次提交
-
-
由 Jean Delvare 提交于
I just can't find any value in MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) and MODULE_ALIAS_MISCDEV(TEMP_MINOR) statements. Either the device is enumerated and the driver already has a module alias (e.g. PCI, USB etc.) that will get the right driver loaded automatically. Or the device is not enumerated and loading its driver will lead to more or less intrusive hardware poking. Such hardware poking should be limited to a bare minimum, so the user should really decide which drivers should be tried and in what order. Trying them all in arbitrary order can't do any good. On top of that, loading that many drivers at once bloats the kernel log. Also many drivers will stay loaded afterward, bloating the output of "lsmod" and wasting memory. Some modules (cs5535_mfgpt which gets loaded as a dependency) can't even be unloaded! If defining char-major-10-130 is needed then it should happen in user-space. Signed-off-by: NJean Delvare <jdelvare@suse.de> Acked-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk> Cc: Jim Cromie <jim.cromie@gmail.com>
-
- 18 5月, 2013 1 次提交
-
-
由 Wolfram Sang 提交于
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
- 09 5月, 2013 1 次提交
-
-
由 Sachin Kamat 提交于
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 01 3月, 2013 2 次提交
-
-
由 Kumar, Anil 提交于
Update the code to use devm_* API so that driver core will manage resources. Signed-off-by: NKumar, Anil <anilkumar.v@ti.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Mrugesh Katepallewar 提交于
Get the clock using devm_clk_get(). Signed-off-by: NMrugesh Katepallewar <mrugesh.mk@ti.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 20 12月, 2012 2 次提交
-
-
由 Murali Karicheri 提交于
This adds OF support for davinci_wdt driver. Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Karicheri, Muralidharan 提交于
As a first step towards migrating davinci platforms to use common clock framework, replace all instances of clk_enable() with clk_prepare_enable() and clk_disable() with clk_disable_unprepare(). Until the platform is switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just adds a might_sleep() call and would work without any issues. This will make it easy later to switch to common clk based implementation of clk driver from DaVinci specific driver. Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 29 11月, 2012 3 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 06 1月, 2012 1 次提交
-
-
由 Axel Lin 提交于
This patch converts the drivers in drivers/watchdog/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Cc: Nicolas Thill <nico@openwrt.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Marc Zyngier <maz@misterjones.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alejandro Cabrera <aldaya@gmail.com> Cc: "George G. Davis" <gdavis@mvista.com> Cc: Sylver Bruneau <sylver.bruneau@googlemail.com> Cc: Vitaly Wool <vital@embeddedalley.com> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: Timo Kokkonen <timo.t.kokkonen@nokia.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 29 3月, 2011 1 次提交
-
-
由 Julia Lawall 提交于
Request_mem_region should be used with release_mem_region, not release_resource. In pnx4008_wdt.c, a missing clk_put is added as well. The semantic match that finds the first problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,E; @@ *x = request_mem_region(...) ... when != release_mem_region(x) when != x = E * release_resource(x); // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Cc: stable <stable@kernel.org>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 07 3月, 2010 1 次提交
-
-
由 Wim Van Sebroeck 提交于
make the watchdog_info struct const where possible. Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 24 12月, 2009 1 次提交
-
-
由 H Hartley Sweeten 提交于
Use resource_size(). Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Kevin Hilman <khilman@ti.deeprootsystems.com> Cc: Ulrik Bech Hald <ubh@ti.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Vincent Sanders <support@simtec.co.uk> Acked-by: NThierry Reding <thierry.reding@avionic-design.de> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
- 18 9月, 2009 1 次提交
-
-
由 Kevin Hilman 提交于
Remove use of CLOCK_TICK_RATE in favor of using clock framework for getting timer frequency. Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NRussell King <linux@arm.linux.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 18 6月, 2009 1 次提交
-
-
由 Wim Van Sebroeck 提交于
A pointer to probe and remove functions is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 25 3月, 2009 1 次提交
-
-
由 Kevin Hilman 提交于
Remove davinci platform-specific IO accessor macros in favor of standard ioremap + io[read|write]* functions. Also, convert printk(KERN_ERR ....) into dev_err(...) Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 07 8月, 2008 2 次提交
-
-
由 Russell King 提交于
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 06 8月, 2008 1 次提交
-
-
由 Wim Van Sebroeck 提交于
This brings the watchdog drivers into line with coding style. This patch takes cares of the indentation as described in chapter 1. Main changes: * Re-structure the ioctl switch call for all drivers as follows: switch (cmd) { case WDIOC_GETSUPPORT: case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: case WDIOC_GETTEMP: case WDIOC_SETOPTIONS: case WDIOC_KEEPALIVE: case WDIOC_SETTIMEOUT: case WDIOC_GETTIMEOUT: case WDIOC_GETTIMELEFT: default: } This to make the migration from the drivers to the uniform watchdog device driver easier in the future. Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 27 5月, 2008 1 次提交
-
-
由 Alan Cox 提交于
Review and switch to unlocked_ioctl Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 11 4月, 2008 1 次提交
-
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable watchdog drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers; registration fixes] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 11月, 2007 1 次提交
-
-
由 Alexey Dobriyan 提交于
Some watchdog drivers initialize global spinlocks in module's init function which is tolerable, but some do it in PCI probe function. So, switch to static initialization to fix theoretical bugs and, more importantly, stop giving people bad examples. Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
- 25 10月, 2007 1 次提交
-
-
由 Florian Fainelli 提交于
This patch fixes two returns in the TI Davinci and PNX4008 in void functions. Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 18 10月, 2007 1 次提交
-
-
由 Wim Van Sebroeck 提交于
move watchdog tree from drivers/char/watchdog to drivers/watchdog. Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 24 7月, 2007 2 次提交
-
-
由 Wim Van Sebroeck 提交于
* Remove the redundant check for pwrite(), given that the open() routine already invokes nonseekable_open(). * The WDIOF_CARDRESET flag can only be used when you can read this status via the WDIOC_GETSTATUS ioctl call. * Add the mandatory WDIOC_GETBOOTSTATUS ioctl call. Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Vladimir Barinov 提交于
Add watchdog support for TI Davinci DM644x/DM646x processors. Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-