- 30 10月, 2013 2 次提交
-
-
由 Sudeep KarkadaNagesha 提交于
OF/DT core library provides architecture specific hook to match the logical cpu index with the corresponding physical identifier. On ARM64, the MPIDR_EL1 contains specific bitfields(MPIDR_EL1.Aff{3..0}) which uniquely identify a CPU, in addition to some non-identifying information and reserved bits. The ARM cpu binding defines the 'reg' property to only contain the affinity bits, and any cpu nodes with other bits set in their 'reg' entry are skipped. This patch overrides the weak definition of arch_match_cpu_phys_id with ARM64 specific version using MPIDR_EL1.Aff{3..0} as cpu physical identifiers. Signed-off-by: NSudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Mark Salter 提交于
Some drivers (ACPI notably) use ioremap_cache() to map an area which could either be outside of kernel RAM or in an already mapped reserved area of RAM. To avoid aliases with different caching attributes, ioremap() does not allow RAM to be remapped. But for ioremap_cache(), the existing kernel mapping may be used. Signed-off-by: NMark Salter <msalter@redhat.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 28 10月, 2013 1 次提交
-
-
由 Robin Murphy 提交于
This patch updates the barrier semantics in the kuser helper functions to take advantage of the ARMv8 additions to AArch32, which are guaranteed to be available in situations where these functions will be called. Note that this slightly changes the cmpxchg functions in that they are no longer necessarily full barriers if they return 1. However, the documentation only states they include their own barriers "as needed", not that they are obligated to act as a full barrier for the caller. Signed-off-by: NRobin Murphy <robin.murphy@arm.com> Acked-by: NWill Deacon <will.deacon@arm.com> CC: Matthew Leach <matthew.leach@arm.com> CC: Dave Martin <dave.martin@arm.com> CC: Mark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 25 10月, 2013 20 次提交
-
-
由 Vinayak Kale 提交于
This patch fixes ARMV8_EVTYPE_* macros since evtCount (event number) field width is 10bits in event selection register. Signed-off-by: NVinayak Kale <vkale@apm.com> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
This patch wires up CONFIG_CPU_BIG_ENDIAN for the AArch64 kernel configuration. Selecting this option builds a big-endian kernel which can boot into a big-endian userspace. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
The owner and next members of the arch_spinlock_t structure need to be swapped when compiling for big endian. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Reported-by: NMatthew Leach <matthew.leach@arm.com> Acked-by: NWill Deacon <will.deacon@arm.com>
-
由 Matthew Leach 提交于
Currently when CPUs are brought online via a spin-table, the address they should jump to is written to the cpu-release-addr in the kernel's native endianness. As the kernel may switch endianness, secondaries might read the value byte-reversed from what was intended, and they would jump to the wrong address. As the only current arm64 spin-table implementations are little-endian, stricten up the arm64 spin-table definition such that the value written to cpu-release-addr is _always_ little-endian regardless of the endianness of any CPU. If a spinning CPU is operating big-endian, it must byte-reverse the value before jumping to handle this. Signed-off-by: NMatthew Leach <matthew.leach@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Matthew Leach 提交于
The endianness of memory accesses at EL2 and EL1 are configured by SCTLR_EL2.EE and SCTLR_EL1.EE respectively. When the kernel is booted, the state of SCTLR_EL{2,1}.EE is unknown, and thus the kernel must ensure that they are set before performing any memory accesses. This patch ensures that SCTLR_EL{2,1} are configured appropriately at boot for kernels of either endianness. Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NMatthew Leach <matthew.leach@arm.com> [catalin.marinas@arm.com: fix SCTLR_EL1.E0E bit setting in head.S] Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Matthew Leach 提交于
Currently, the code for setting the __cpu_boot_mode flag is munged in with el2_setup. This makes things difficult on a BE bringup as a memory access has to have occurred before el2_setup which is the place that we'd like to set the endianess on the current EL. Create a new function for setting __cpu_boot_mode and have el2_setup return the mode the CPU. Also define a new constant in virt.h, BOOT_CPU_MODE_EL1, for readability. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NMatthew Leach <matthew.leach@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Matthew Leach 提交于
Add CPU_LE and CPU_BE to select assembler code in little and big endian configurations respectively. Signed-off-by: NMatthew Leach <matthew.leach@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Matthew Leach 提交于
Currently the sigreturn compat code is copied to an offset in the vectors table. When using a BE kernel this data will be stored in the wrong endianess so when returning from a signal on a 32-bit BE system, arbitrary code will be executed. Instead of declaring the code inside a struct and copying that, use the assembler's .byte directives to store the code in the correct endianess regardless of platform endianess. Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NMatthew Leach <matthew.leach@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Matthew Leach 提交于
The arm64 port contains wrappers for arm32 syscalls that pass 64-bit values. These wrappers concatenate the two registers to hold a 64-bit value in a single X register. On BE, however, the lower and higher words are swapped. Create a new assembler macro, regs_to_64, that when on BE systems swaps the registers in the orr instruction. Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NMatthew Leach <matthew.leach@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
This patch adds support for BE8 AArch32 tasks to the compat layer. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
uname -m reports the machine field from the current utsname, which should reflect the endianness of the system. This patch reports ELF_PLATFORM for the field, so that everything appears consistent from userspace. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
This patch adds support for the aarch64_be ELF format to the AArch64 ELF loader. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
For big-endian processors, we must include linux/byteorder/big_endian.h to get the relevant definitions for swabbing between CPU order and a defined endianness. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
This patch adds big-endian support to the AArch64 top-level Makefile. This currently just passes the relevant flags to the toolchain and is predicated on a Kconfig option that will be introduced later on. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Mark Rutland 提交于
This patch adds support for using PSCI CPU_OFF calls for CPU hotplug. With this code it is possible to hot unplug CPUs with "psci" as their boot-method, as long as there's an appropriate cpu_off function id specified in the psci node. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Mark Rutland 提交于
This patch adds the basic infrastructure necessary to support CPU_HOTPLUG on arm64, based on the arm implementation. Actual hotplug support will depend on an implementation's cpu_operations (e.g. PSCI). Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Mark Rutland 提交于
With the advent of CPU_HOTPLUG, the enable-method property for CPU0 may tells us something useful (i.e. how to hotplug it back on), so we must read it along with all the enable-method for all the other CPUs. Even on UP the enable-method may tell us useful information (e.g. if a core has some mechanism that might be usable for cpuidle), so we should always read it. This patch factors out the reading of the enable method, and ensures that CPU0's enable method is read regardless of whether the kernel is built with SMP support. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Mark Rutland 提交于
The arm64 kernel has an internal holding pen, which is necessary for some systems where we can't bring CPUs online individually and must hold multiple CPUs in a safe area until the kernel is able to handle them. The current SMP infrastructure for arm64 is closely coupled to this holding pen, and alternative boot methods must launch CPUs into the pen, where they sit before they are launched into the kernel proper. With PSCI (and possibly other future boot methods), we can bring CPUs online individually, and need not perform the secondary_holding_pen dance. Instead, this patch factors the holding pen management code out to the spin-table boot method code, as it is the only boot method requiring the pen. A new entry point for secondaries, secondary_entry is added for other boot methods to use, which bypasses the holding pen and its associated overhead when bringing CPUs online. The smp.pen.text section is also removed, as the pen can live in head.text without problem. The cpu_operations structure is extended with two new functions, cpu_boot and cpu_postboot, for bringing a cpu into the kernel and performing any post-boot cleanup required by a bootmethod (e.g. resetting the secondary_holding_pen_release to INVALID_HWID). Documentation is added for cpu_operations. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Mark Rutland 提交于
For hotplug support, we're going to want a place to store operations that do more than bring CPUs online, and it makes sense to group these with our current smp_enable_ops. For cpuidle support, we'll want to group additional functions, and we may want them even for UP kernels. This patch renames smp_enable_ops to the more general cpu_operations, and pulls the definitions out of smp code such that they can be used in UP kernels. While we're at it, fix up instances of the cpu parameter to be an unsigned int, drop the init markings and rename the *_cpu functions to cpu_* to reduce future churn when cpu_operations is extended. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Mark Rutland 提交于
The functions in psci.c are only used from smp_psci.c, and smp_psci cannot function without psci.c. Additionally psci.c is built when !SMP, where it's expected that cpu_suspend may be useful. This patch unifies the two files, removing pointless duplication and paving the way for PSCI support in UP systems. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 24 10月, 2013 6 次提交
-
-
由 Mark Rutland 提交于
There are a few points in the arm64 booting document which are unclear (such as the initial state of secondary CPUs), and/or have not been documented (PSCI is a supported mechanism for booting secondary CPUs). This patch amends the arm64 boot document to better express the (existing) requirements, and to describe PSCI as a supported booting mechanism. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Reviewed-by: NWill Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Martin <dave.martin@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Fu Wei <tekkamanninja@gmail.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
This function may be called from loadable modules, so it needs exporting. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Reported-by: NLoc Ho <lho@apm.com>
-
由 Will Deacon 提交于
This patch introduces cmpxchg64_relaxed for arm64 using the existing cmpxchg_local macro, which performs a cmpxchg operation (up to 64 bits) without barrier semantics. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
Our spinlocks are only 32-bit (2x16-bit tickets) and our cmpxchg can deal with 8-bytes (as one would hope!). This patch wires up the cmpxchg-based lockless lockref implementation for arm64. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
This patch introduces a ticket lock implementation for arm64, along the same lines as the implementation for arch/arm/. Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 23 10月, 2013 1 次提交
-
-
由 AKASHI Takahiro 提交于
In ftrace_syscall_enter(), syscall_get_arguments(..., 0, n, ...) if (i == 0) { <handle orig_x0> ...; n--;} memcpy(..., n * sizeof(args[0])); If 'number of arguments(n)' is zero and 'argument index(i)' is also zero in syscall_get_arguments(), none of arguments should be copied by memcpy(). Otherwise 'n--' can be a big positive number and unexpected amount of data will be copied. Tracing system calls which take no argument, say sync(void), may hit this case and eventually make the system corrupted. This patch fixes the issue both in syscall_get_arguments() and syscall_set_arguments(). Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 07 10月, 2013 4 次提交
-
-
由 Linus Torvalds 提交于
-
由 Eric W. Biederman 提交于
Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: stable@vger.kernel.org Reviewed-by: NEric Sandeen <sandeen@redhat.com> Reported-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target fixes queued up for v3.12-rc4 code. The highlights include: - Make vhost/scsi tag percpu_ida_alloc() use GFP_ATOMIC - Allow sess_cmd_map allocation failure fallback to use vzalloc - Fix COMPARE_AND_WRITE se_cmd->data_length bug with FILEIO backends - Fixes for COMPARE_AND_WRITE callback recursive failure OOPs + non zero scsi_status bug - Make iscsi-target do acknowledgement tag release from RX context - Setup iscsi-target with extra (cmdsn_depth / 2) percpu_ida tags Also included is a iscsi-target patch CC'ed for v3.10+ that avoids legacy wait_for_task=true release during fast-past StatSN acknowledgement, and two other SRP target related patches that address long-standing issues that are CC'ed for v3.3+. Extra thanks to Thomas Glanzmann for his testing feedback with COMPARE_AND_WRITE + EXTENDED_COPY VAAI logic" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tags iscsi-target: Perform release of acknowledged tags from RX context iscsi-target: Only perform wait_for_tasks when performing shutdown target: Fail on non zero scsi_status in compare_and_write_callback target: Fix recursive COMPARE_AND_WRITE callback failure target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size ib_srpt: always set response for task management target: Fall back to vzalloc upon ->sess_cmd_map kzalloc failure vhost/scsi: Use GFP_ATOMIC with percpu_ida_alloc for obtaining tag ib_srpt: Destroy cm_id before destroying QP. target: Fix xop->dbl assignment in target_xcopy_parse_segdesc_02
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes from Vinod Koul: "Here is the slave dmanegine fixes. We have the fix for deadlock issue on imx-dma by Michael and Josh's edma config fix along with author change" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: imx-dma: fix callback path in tasklet dmaengine: imx-dma: fix lockdep issue between irqhandler and tasklet dmaengine: imx-dma: fix slow path issue in prep_dma_cyclic dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMA edma: Update author email address
-
- 06 10月, 2013 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "This is a small collection of fixes, including a regression fix from Liu Bo that solves rare crashes with compression on. I've merged my for-linus up to 3.12-rc3 because the top commit is only meant for 3.12. The rest of the fixes are also available in my master branch on top of my last 3.11 based pull" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: Fix crash due to not allocating integrity data for a bioset Btrfs: fix a use-after-free bug in btrfs_dev_replace_finishing Btrfs: eliminate races in worker stopping code Btrfs: fix crash of compressed writes Btrfs: fix transid verify errors when recovering log tree
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO fixes from Linus Walleij: "Two patches for the OMAP driver, dealing with setting up IRQs properly on the device tree boot path" * tag 'gpio-v3.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio/omap: auto-setup a GPIO when used as an IRQ gpio/omap: maintain GPIO and IRQ usage separately
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are none fixes for various USB driver problems. The majority are gadget/musb fixes, but there are some new device ids in here as well" * tag 'usb-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: add Intel Clovertrail pci id usb: gadget: s3c-hsotg: fix can_write limit for non-periodic endpoints usb: gadget: f_fs: fix error handling usb: musb: dsps: do not bind to "musb-hdrc" USB: serial: option: Ignore card reader interface on Huawei E1750 usb: musb: gadget: fix otg active status flag usb: phy: gpio-vbus: fix deferred probe from __init usb: gadget: pxa25x_udc: fix deferred probe from __init usb: musb: fix otg default state
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty fixes from Greg KH: "Here are two tty driver fixes for 3.12-rc4. One fixes the reported regression in the n_tty code that a number of people found recently, and the other one fixes an issue with xen consoles that broke in 3.10" * tag 'tty-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: xen/hvc: allow xenboot console to be used again tty: Fix pty master read() after slave closes
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging fixes from Greg KH: "Here are 4 tiny staging and iio driver fixes for 3.12-rc4. Nothing major, just some small fixes for reported issues" * tag 'staging-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: ni_65xx: (bug fix) confine insn_bits to one subdevice iio:magnetometer: Bugfix magnetometer default output registers iio: Remove debugfs entries in iio_device_unregister() iio: amplifiers: ad8366: Remove regulator_put
-
- 05 10月, 2013 1 次提交
-
-
由 Darrick J. Wong 提交于
When btrfs creates a bioset, we must also allocate the integrity data pool. Otherwise btrfs will crash when it tries to submit a bio to a checksumming disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 PGD 2305e4067 PUD 23063d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: btrfs scsi_debug xfs ext4 jbd2 ext3 jbd mbcache sch_fq_codel eeprom lpc_ich mfd_core nfsd exportfs auth_rpcgss af_packet raid6_pq xor zlib_deflate libcrc32c [last unloaded: scsi_debug] CPU: 1 PID: 4486 Comm: mount Not tainted 3.12.0-rc1-mcsum #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8802451c9720 ti: ffff880230698000 task.ti: ffff880230698000 RIP: 0010:[<ffffffff8111e28a>] [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 RSP: 0018:ffff880230699688 EFLAGS: 00010286 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000005f8445 RDX: 0000000000000001 RSI: 0000000000000010 RDI: 0000000000000000 RBP: ffff8802306996f8 R08: 0000000000011200 R09: 0000000000000008 R10: 0000000000000020 R11: ffff88009d6e8000 R12: 0000000000011210 R13: 0000000000000030 R14: ffff8802306996b8 R15: ffff8802451c9720 FS: 00007f25b8a16800(0000) GS:ffff88024fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000018 CR3: 0000000230576000 CR4: 00000000000007e0 Stack: ffff8802451c9720 0000000000000002 ffffffff81a97100 0000000000281250 ffffffff81a96480 ffff88024fc99150 ffff880228d18200 0000000000000000 0000000000000000 0000000000000040 ffff880230e8c2e8 ffff8802459dc900 Call Trace: [<ffffffff811b2208>] bio_integrity_alloc+0x48/0x1b0 [<ffffffff811b26fc>] bio_integrity_prep+0xac/0x360 [<ffffffff8111e298>] ? mempool_alloc+0x58/0x150 [<ffffffffa03e8041>] ? alloc_extent_state+0x31/0x110 [btrfs] [<ffffffff81241579>] blk_queue_bio+0x1c9/0x460 [<ffffffff8123e58a>] generic_make_request+0xca/0x100 [<ffffffff8123e639>] submit_bio+0x79/0x160 [<ffffffffa03f865e>] btrfs_map_bio+0x48e/0x5b0 [btrfs] [<ffffffffa03c821a>] btree_submit_bio_hook+0xda/0x110 [btrfs] [<ffffffffa03e7eba>] submit_one_bio+0x6a/0xa0 [btrfs] [<ffffffffa03ef450>] read_extent_buffer_pages+0x250/0x310 [btrfs] [<ffffffff8125eef6>] ? __radix_tree_preload+0x66/0xf0 [<ffffffff8125f1c5>] ? radix_tree_insert+0x95/0x260 [<ffffffffa03c66f6>] btree_read_extent_buffer_pages.constprop.128+0xb6/0x120 [btrfs] [<ffffffffa03c8c1a>] read_tree_block+0x3a/0x60 [btrfs] [<ffffffffa03caefd>] open_ctree+0x139d/0x2030 [btrfs] [<ffffffffa03a282a>] btrfs_mount+0x53a/0x7d0 [btrfs] [<ffffffff8113ab0b>] ? pcpu_alloc+0x8eb/0x9f0 [<ffffffff81167305>] ? __kmalloc_track_caller+0x35/0x1e0 [<ffffffff81176ba0>] mount_fs+0x20/0xd0 [<ffffffff81191096>] vfs_kern_mount+0x76/0x120 [<ffffffff81193320>] do_mount+0x200/0xa40 [<ffffffff81135cdb>] ? strndup_user+0x5b/0x80 [<ffffffff81193bf0>] SyS_mount+0x90/0xe0 [<ffffffff8156d31d>] system_call_fastpath+0x1a/0x1f Code: 4c 8d 75 a8 4c 89 6d e8 45 89 e0 4c 8d 6f 30 48 89 5d d8 41 83 e0 af 48 89 fb 49 83 c6 18 4c 89 7d f8 65 4c 8b 3c 25 c0 b8 00 00 <48> 8b 73 18 44 89 c7 44 89 45 98 ff 53 20 48 85 c0 48 89 c2 74 RIP [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 RSP <ffff880230699688> CR2: 0000000000000018 ---[ end trace 7a96042017ed21e2 ]--- Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-