Native PCI drivers for root complex devices were originally all in
drivers/pci/host/.  Some of these devices can also be operated in endpoint
mode.  Drivers for endpoint mode didn't seem to fit in the "host"
directory, so we put both the root complex and endpoint drivers in
per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc.

These per-device directories contain trivial Kconfig and Makefiles and
clutter drivers/pci/.  Make a new drivers/pci/controllers/ directory and
collect all the device-specific drivers there.

No functional change intended.

Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.comSigned-off-by: NShawn Lin <shawn.lin@rock-chips.com>
[bhelgaas: changelog]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The AER driver only needed the pcie_device to get to the port pci_dev.
Save the pci_dev pointer directly in struct aer_rpc and remove the
unnecessary indirection.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Remove unused "struct pcie_device *" parameters to handle_error_source()
and aer_process_err_devices().  No functional change intended.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

When CONFIG_GPIOLIB is disabled, we run into a build failure:

  drivers/pci/dwc/pcie-qcom.c: In function 'qcom_pcie_probe':
  drivers/pci/dwc/pcie-qcom.c:1223:16: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration]
    pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW);

Including gpio/consumer.h directly is the correct fix.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>

pci_scan_child_bus_extend() complains when we assign an unreachable
secondary bus number to a bridge.  For example, given the topology below:

  +-1b.0-[01-39]----00.0-[02-3a]--+-00.0-[03]----00.0
                                  +-01.0-[04-39]--
                                  \-02.0-[3a]----00.0

it logs the following messages:

  pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:02 [bus 02-39]
  pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:01 [bus 01-39]

These messages are incorrect (0000:02 is a bus, not a bridge) and
confusing.  Make the message more understandable:

  pci 0000:02:02.0: devices behind bridge are unusable because [bus 3a] cannot be assigned for them

Also, remove the reference to CardBus, because this issue affects all
varieties of PCI, not just CardBus.
Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: changelog]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

It is not immediately clear what the two functions actually return so
add kernel-doc comment explaining it a bit better.
Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

If there is only a single bridge on the bus, we assign all resources to it.
Currently this is done as a part of the resource distribution loop but it
does not have to be there, and moving it outside actually improves
readability because we can then save one indent level in the loop.

While there we can add hotplug_bridges == 1 && normal_bridges == 0 to
the same block because they are dealt the same way.
Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

When distributing extra bus number space to hotplug bridges for future
extension, we don't account for the fact that there might be non-hotplug
bridges on the bus after the hotplug bridges.  For example:

  01:00.0 --+- 02:00.0 (HotPlug-) -- Thunderbolt host controller
            +- 02:01.0 (HotPlug+)
            \- 02:02.0 (HotPlug-) -- xHCI host controller

pci_scan_child_bus_extend() is supposed to distribute the remaining bus
numbers to the hotplug bridge at 02:01.0, but only after accounting for all
bridges on bus 02.  Since we don't check whether there's another
non-hotplug bridge after the hotplug bridge 02:01.0, it may not leave space
for the non-hotplug bridge:

  pci 0000:00:1b.0: PCI bridge to [bus 01-39]  (Root Port)
  pci 0000:01:00.0: PCI bridge to [bus 02-39]
  ...
  pci 0000:02:00.0: PCI bridge to [bus 03]
  pci 0000:02:01.0: PCI bridge to [bus 04]
  pci_bus 0000:04: [bus 04-39] extended by 0x35
  pci_bus 0000:04: bus scan returning with max=39
  pci_bus 0000:04: busn_res: [bus 04-39] end is updated to 39
  pci 0000:02:02.0: scanning [bus 00-00] behind bridge, pass 1
  pci_bus 0000:3a: scanning bus
  pci_bus 0000:3a: bus scan returning with max=3a
  pci_bus 0000:3a: busn_res: [bus 3a] end is updated to 3a
  pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:02 [bus 02-39]
  pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:01 [bus 01-39]
  pci_bus 0000:02: bus scan returning with max=3a
  pci_bus 0000:02: busn_res: [bus 02-39] end can not be updated to 3a

The resulting 'lspci -t' output looks like this:

  +-1b.0-[01-39]----00.0-[02-3a]--+-00.0-[03]----00.0
                             ^^   +-01.0-[04-39]--
                                  \-02.0-[3a]----00.0
                                          ^^
The xHCI host controller behind 02:02.0 is not usable because it would have
to be assigned bus 3a, which is not accessible through 00:1b.0.

To fix this, reserve at least one bus for each bridge while scanning
already configured bridges.  Then use this information in the second
scan to correct the available extra bus space for hotplug bridges.

After this change the 'lspci -t' output is what is expected:

  +-1b.0-[01-39]----00.0-[02-39]--+-00.0-[03]----00.0
                                  +-01.0-[04-38]--
                                  \-02.0-[39]----00.0

The xHCI controller is now on bus 39, where it is usable.

Fixes: 1c02ea81 ("PCI: Distribute available buses to hotplug-capable bridges")
Reported-by: NMario Limonciello <mario.limonciello@dell.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: changelog]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org

Remove unnecessary parentheses.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Following PCIehp mark the unplugged PCI devices disconnected.  This makes
sure PCI core code leaves the now missing hardware registers alone.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

When acpiphp re-enumerates a PCI hierarchy because of an ACPI Notify()
event, we should skip bridges managed by native hotplug (pciehp or shpchp).
We don't want to scan below a native hotplug bridge until the hotplug
controller generates a hot-add event.

A typical scenario is a Root Port leading to a Thunderbolt host router that
remains powered off until something is connected to it.  See [1] for the
lspci details.

  1. Before something is connected, only the Root Port exists.  It has
     PCI_EXP_SLTCAP_HPC set and pciehp is responsible for hotplug:

       00:1b.0 Root Port (HotPlug+)

  2. When a USB-C or Thunderbolt device is connected, the Switch in the
     Thunderbolt host router is powered up, the Root Port signals a hotplug
     add event and pciehp enumerates the Switch:

       01:00.0 Switch Upstream Port   to [bus 02-39]
       02:00.0 Switch Downstream Port to [bus 03]    (HotPlug-, to NHI)
       02:01.0 Switch Downstream Port to [bus 04-38] (HotPlug+, to Thunderbolt connector)
       02:02.0 Switch Downstream Port to [bus 39]    (HotPlug-, to xHCI)

     The 02:00.0 and 02:02.0 Ports lead to Endpoints that are not powered
     up yet.  The Ports have PCI_EXP_SLTCAP_HPC cleared, so pciehp doesn't
     handle hotplug for them and we assign minimal resources to them.

     The 02:01.0 Port has PCI_EXP_SLTCAP_HPC set, so pciehp handles native
     hotplug events for it.

  3. The BIOS powers up the xHCI controller.  If a Thunderbolt device was
     connected (not just a USB-C device), it also powers up the NHI.  Then
     it sends an ACPI Notify() to the Root Port, and acpiphp enumerates the
     new device(s):

       03:00.0 Thunderbolt Host Controller (NHI) Endpoint
       39:00.0 xHCI Endpoint

  4. If a Thunderbolt device was connected, the host router firmware uses
     the NHI to set up Thunderbolt tunnels and triggers a native hotplug
     event (via 02:01.0 in this example).  Then pciehp enumerates the new
     Thunderbolt devices:

       04:00.0 Switch Upstream Port   to [bus 05-38]
       05:01.0 Switch Downstream Port to [bus 06-09] (HotPlug-)
       05:04.0 Switch Downstream Port to [bus 0a-38] (HotPlug+)

     In this example, 05:01.0 leads to another Switch and some NICs.  This
     subtree is static, so 05:01.0 doesn't support hotplug and has
     PCI_EXP_SLTCAP_HPC cleared.

In step 3, acpiphp previously enumerated everything below the Root Port,
including things below the 02:01.0 Port.  We don't want that because pciehp
expects to manage hotplug below that Port, and firmware on the host router
may be in the middle of configuring its Link so it may not be ready yet.

To make this work better with the native PCIe (pciehp) and standard PCI
(shpchp) hotplug drivers, we let them handle all slot management and
resource allocation for hotplug bridges and restrict ACPI hotplug to
non-hotplug bridges.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=199581#c5
Link: https://lkml.kernel.org/r/20180529160155.1738-1-mika.westerberg@linux.intel.comSigned-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: changelog, use hotplug_is_native() instead of
dev->is_hotplug_bridge]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

In the same way we do for pciehp, add shpchp_is_native(), which returns
true if the bridge should be handled by the native SHPC driver.  Then
convert the driver to use this function.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The fix for an AMD POGO erratum related to SHPC incorrectly identified the
device.  The workaround should be applied only for AMD POGO devices, but it
was instead applied to:

  - all AMD bridges, and
  - all devices from any vendor with device ID 0x7458

Fixes: 53044f35 ("[PATCH] PCI Hotplug: shpchp: AMD POGO errata fix")
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Implement MSI support for Mobiveil PCIe Host Bridge IP device driver.
Signed-off-by: NSubrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>

Add a driver for Mobiveil AXI PCIe Host Bridge Soft IP - GPEX 4.0,
a PCIe gen4 IP. This IP has upto 8 outbound and inbound windows
for the address translation.
Signed-off-by: NSubrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[bhelgaas: fold in mobiveil_pcie_of_match[] NULL termination from Wei
Yongjun <weiyongjun1@huawei.com>]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>

Decode the Requester ID from the AER Error Source Register into domain/
bus/device/function format to match other logging.  In cases where the ID
matches the device used for pci_err(), drop the extra ID completely so we
don't print it twice.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Just move the actual function up so that it is visible to its user
aer_recover_queue().

No functional changes.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Our goal is to handle ERR_FATAL errors similarly, whether they are reported
via AER or via DPC.  A previous commit changed AER so it handles ERR_FATAL
by calling driver .remove() methods and resetting the Link.  DPC already
does that (although the Link reset is done automatically by hardware and
happens before we call the driver .remove() methods).

Restructure the DPC code so it calls the same pcie_do_fatal_recovery()
interface used by AER.  This makes it clearer that we want to use the same
path.

Implement the .reset_link() method used by pcie_do_fatal_recovery().  For
DPC, the actual reset is done automatically by hardware, so we really only
have to wait for the Link to be inactive, then release the Port from DPC.
Signed-off-by: NOza Pawandeep <poza@codeaurora.org>
[bhelgaas: changelog, DPC_FATAL is not a bitfield, can be sequential]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Pass the service type to pcie_do_fatal_recovery() instead of assuming AER.
We will make DPC also use pcie_do_fatal_recovery(), and it needs to do
things a little differently for AER and DPC.
Signed-off-by: NOza Pawandeep <poza@codeaurora.org>
[bhelgaas: split to separate patch]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

PCIe ERR_NONFATAL errors mean a particular transaction is unreliable but
the Link is otherwise fully functional (PCIe r4.0, sec 6.2.2).

The AER driver handles these by logging the error details and calling
driver-supplied pci_error_handlers callbacks.  It does not reset downstream
devices, does not remove them from the PCI subsystem, does not re-enumerate
them, and does not call their driver .remove() or .probe() methods.

But DPC driver previously enabled DPC on ERR_NONFATAL, so if the hardware
supports DPC, these errors caused a Link reset (performed automatically by
the hardware), followed by the DPC driver removing affected devices (which
calls their .remove() methods), bringing the Link back up, and
re-enumerating (which calls driver .probe() methods).

Disable ERR_NONFATAL DPC triggering so these errors will only be handled by
AER.  This means drivers won't have to deal with different usage of their
pci_error_handlers callbacks and .probe() and .remove() methods based on
whether the platform has DPC support.
Signed-off-by: NOza Pawandeep <poza@codeaurora.org>
[bhelgaas: changelog]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add generic pcie_port_find_device() routine.
Signed-off-by: NOza Pawandeep <poza@codeaurora.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NKeith Busch <keith.busch@intel.com>

Use dev_printk() for messages related to requesting control of SHPC hotplug
via the OSHP method.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

get_hp_hw_control_from_firmware() is a trivial wrapper around
acpi_get_hp_hw_control_from_firmware(), probably intended to be generic in
case other firmware needed similar OS/platform negotiation.

Remove get_hp_hw_control_from_firmware() and call
acpi_get_hp_hw_control_from_firmware() directly.  Add a stub for
acpi_get_hp_hw_control_from_firmware() for the non-ACPI case.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

acpi_get_hp_hw_control_from_firmware() no longer uses the flags parameter,
so remove it.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: split to separate patch]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

If _OSC exists, we evaluated it when adding the ACPI host bridge, and we
requested SHPC control if the SHPC driver is present.  Use the result of
that _OSC evaluation instead of evaluating it again.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: split to separate patch]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The SHPC driver now must be builtin (it cannot be a module).  If it is
present, request SHPC control immediately when adding the ACPI host bridge.
This is similar to how we handle native PCIe hotplug via pciehp.
Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: split to separate patch]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

We need to be able coordinate between SHPC and acpiphp to determine which
driver handles hotplug of a given bridge.  Because acpiphp is already bool,
convert SHPC to be bool as well.
Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Previously pciehp_is_native() returned true for any PCI device in a
hierarchy where _OSC says we can use pciehp.  This is incorrect because
bridges without PCI_EXP_SLTCAP_HPC capability should be managed by acpiphp
instead.

Improve pciehp_is_native() to return true only when PCI_EXP_SLTCAP_HPC is
set and the pciehp driver is present.  In any other case return false
to let acpiphp handle those.
Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: remove NULL pointer check]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Rename host->native_hotplug to host->native_pcie_hotplug to make room for a
similar flag for SHPC hotplug.
Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: split to separate patch]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The generic PCI host controller is often instantiated by hypervisors, and
they may add several of them or add them in addition to a physical host
controller like the Jailhouse hypervisor is doing.  Therefore, allow for
multiple domains so that we can handle them all.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add support for unbinding the generic PCI host controller.  This is
particularly useful when working in virtual environments where the
controller may come and go, but possibly not only there.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Will Deacon <will.deacon@arm.com>
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

of_pci_get_host_bridge_resources() allocates the resource structures it
fills dynamically, but none of its callers care to release them so far.
Rather than requiring everyone to do this explicitly, convert the existing
function to a managed version.
Tested-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Acked-by: NJoao Pinto <jpinto@synopsys.com>
Acked-by: NJingoo Han <jingoohan1@gmail.com>
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Now that we have a device reference, make use of it for printing.
Tested-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com>

Another step towards a managed version of
of_pci_get_host_bridge_resources(): Feed in the underlying device, rather
than just the OF node.  This will allow us to use managed resource
allocation internally later on.
Tested-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Acked-by: NJingoo Han <jingoohan1@gmail.com>
CC: Joao Pinto <Joao.Pinto@synopsys.com>
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

We will add a "struct device *dev" parameter to this function soon, so
rename the existing "struct device_node *dev" parameter to "dev_node".
Tested-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com>

Fix a memory leak by freeing the PCI resource list in
devm_pci_release_host_bridge_dev().

Fixes: 5c3f18cc ("PCI: Add devm_pci_alloc_host_bridge() interface")
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

In some cases pcie_get_minimum_link() returned misleading information
because it found the slowest link and the narrowest link without
considering the total bandwidth of the link.

For example, consider a path with these two links:

  - 16.0 GT/s  x1 link  (16.0 * 10^9 * 128 / 130) *  1 / 8 = 1969 MB/s
  -  2.5 GT/s x16 link  ( 2.5 * 10^9 *   8 /  10) * 16 / 8 = 4000 MB/s

The available bandwidth of the path is limited by the 16 GT/s link to about
1969 MB/s, but pcie_get_minimum_link() returned 2.5 GT/s x1, which
corresponds to only 250 MB/s.

Callers should use pcie_print_link_status() instead, or
pcie_bandwidth_available() if they need more detailed information.

Remove pcie_get_minimum_link() since there are no callers left.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Manipulating the enable_cnt behind the back of the driver will wreak
complete havoc with the kernel state, so disallow it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NKeith Busch <keith.busch@intel.com>

Some SR-IOV PF drivers implement .sriov_configure(), which allows
user-space to enable VFs by writing the desired number of VFs to the sysfs
"sriov_numvfs" file (see sriov_numvfs_store()).

The PCI core limits the number of VFs to the TotalVFs advertised by the
device in its SR-IOV capability.  The PF driver can limit the number of VFs
to even fewer (it may have pre-allocated data structures or knowledge of
device limitations) by calling pci_sriov_set_totalvfs(), but previously it
could not limit the VFs to 0.

Change pci_sriov_get_totalvfs() so it always respects the VF limit imposed
by the PF driver, even if the limit is 0.

This sequence:

  pci_sriov_set_totalvfs(dev, 0);
  x = pci_sriov_get_totalvfs(dev);

previously set "x" to TotalVFs from the SR-IOV capability.  Now it will set
"x" to 0.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
[bhelgaas: split to separate patch]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Before the guest finishes the device initialization, the device can be
removed anytime by the host, and after that the host won't respond to
the guest's request, so the guest should be prepared to handle this
case.

Add a polling mechanism to detect device presence.
Signed-off-by: NDexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: edited commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>