Add necessary alias to autoload ip6ip6 tunnel module.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When configs BRIDGE=y and IPV6=m, this build error occurs:

br_multicast.c:(.text+0xa3341): undefined reference to `ipv6_dev_get_saddr'

BRIDGE_IGMP_SNOOPING is boolean; if it were tristate, then adding
	depends on IPV6 || IPV6=n
to BRIDGE_IGMP_SNOOPING would be a good fix.  As it is currently,
making BRIDGE depend on the IPV6 config works.
Reported-by: NPatrick Schaaf <netdev@bof.de>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=29252
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=30462

In commit d80bc0fd ("ipv6: Always
clone offlink routes.") we forced the kernel to always clone offlink
routes.

The reason we do that is to make sure we never bind an inetpeer to a
prefixed route.

The logic turned on here has existed in the tree for many years,
but was always off due to a protecting CPP define.  So perhaps
it's no surprise that there is a logic bug here.

The problem is that we canot clone a route that is already a
host route (ie. has DST_HOST set).  Because if we do, an identical
entry already exists in the routing tree and therefore the
ip6_rt_ins() call is going to fail.

This sets off a series of failures and high cpu usage, because when
ip6_rt_ins() fails we loop retrying this operation a few times in
order to handle a race between two threads trying to clone and insert
the same host route at the same time.

Fix this by simply using the route as-is when DST_HOST is set.

Reported-by: slash@ac.auone-net.jp
Reported-by: NErnst Sjöstrand <ernstp@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since a8f80e8f any process with
CAP_NET_ADMIN may load any module from /lib/modules/.  This doesn't mean
that CAP_NET_ADMIN is a superset of CAP_SYS_MODULE as modules are
limited to /lib/modules/**.  However, CAP_NET_ADMIN capability shouldn't
allow anybody load any module not related to networking.

This patch restricts an ability of autoloading modules to netdev modules
with explicit aliases.  This fixes CVE-2011-1019.

Arnd Bergmann suggested to leave untouched the old pre-v2.6.32 behavior
of loading netdev modules by name (without any prefix) for processes
with CAP_SYS_MODULE to maintain the compatibility with network scripts
that use autoloading netdev modules by aliases like "eth0", "wlan0".

Currently there are only three users of the feature in the upstream
kernel: ipip, ip_gre and sit.

    root@albatros:~# capsh --drop=$(seq -s, 0 11),$(seq -s, 13 34) --
    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	fffffff800001000
    CapEff:	fffffff800001000
    CapBnd:	fffffff800001000
    root@albatros:~# modprobe xfs
    FATAL: Error inserting xfs
    (/lib/modules/2.6.38-rc6-00001-g2bf4ca3/kernel/fs/xfs/xfs.ko): Operation not permitted
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit
    sit: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit0
    sit0      Link encap:IPv6-in-IPv4
	      NOARP  MTU:1480  Metric:1

    root@albatros:~# lsmod | grep sit
    sit                    10457  0
    tunnel4                 2957  1 sit

For CAP_SYS_MODULE module loading is still relaxed:

    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	ffffffffffffffff
    CapEff:	ffffffffffffffff
    CapBnd:	ffffffffffffffff
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    xfs                   745319  0

Reference: https://lkml.org/lkml/2011/2/24/203Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NKees Cook <kees.cook@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

The units in show_results in pktgen were not correct.
The results are in usec but it was displayed nsec.
Reported-by: NJong-won Lee <ljw@handong.edu>
Signed-off-by: NDaniel Turull <daniel.turull@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In usual cases ifa_address == ifa_local, but in the case where
SIOCSIFDSTADDR sets the destination address on a point-to-point
link, ifa_address gets set to that destination address.

Therefore we should use ifa_local when we want the local interface
address.

There were two cases where the selection was done incorrectly:

1) When devinet_ioctl() does matching, it checks ifa_address even
   though gifconf correct reported ifa_local to the user

2) IN_DEV_ARP_NOTIFY handling sends a gratuitous ARP using
   ifa_address instead of ifa_local.
Reported-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Recently had this bug halt reported to me:

kernel BUG at net/rds/send.c:329!
Oops: Exception in kernel mode, sig: 5 [#1]
SMP NR_CPUS=1024 NUMA pSeries
Modules linked in: rds sunrpc ipv6 dm_mirror dm_region_hash dm_log ibmveth sg
ext4 jbd2 mbcache sd_mod crc_t10dif ibmvscsic scsi_transport_srp scsi_tgt
dm_mod [last unloaded: scsi_wait_scan]
NIP: d000000003ca68f4 LR: d000000003ca67fc CTR: d000000003ca8770
REGS: c000000175cab980 TRAP: 0700   Not tainted  (2.6.32-118.el6.ppc64)
MSR: 8000000000029032 <EE,ME,CE,IR,DR>  CR: 44000022  XER: 00000000
TASK = c00000017586ec90[1896] 'krdsd' THREAD: c000000175ca8000 CPU: 0
GPR00: 0000000000000150 c000000175cabc00 d000000003cb7340 0000000000002030
GPR04: ffffffffffffffff 0000000000000030 0000000000000000 0000000000000030
GPR08: 0000000000000001 0000000000000001 c0000001756b1e30 0000000000010000
GPR12: d000000003caac90 c000000000fa2500 c0000001742b2858 c0000001742b2a00
GPR16: c0000001742b2a08 c0000001742b2820 0000000000000001 0000000000000001
GPR20: 0000000000000040 c0000001742b2814 c000000175cabc70 0800000000000000
GPR24: 0000000000000004 0200000000000000 0000000000000000 c0000001742b2860
GPR28: 0000000000000000 c0000001756b1c80 d000000003cb68e8 c0000001742b27b8
NIP [d000000003ca68f4] .rds_send_xmit+0x4c4/0x8a0 [rds]
LR [d000000003ca67fc] .rds_send_xmit+0x3cc/0x8a0 [rds]
Call Trace:
[c000000175cabc00] [d000000003ca67fc] .rds_send_xmit+0x3cc/0x8a0 [rds]
(unreliable)
[c000000175cabd30] [d000000003ca7e64] .rds_send_worker+0x54/0x100 [rds]
[c000000175cabdb0] [c0000000000b475c] .worker_thread+0x1dc/0x3c0
[c000000175cabed0] [c0000000000baa9c] .kthread+0xbc/0xd0
[c000000175cabf90] [c000000000032114] .kernel_thread+0x54/0x70
Instruction dump:
4bfffd50 60000000 60000000 39080001 935f004c f91f0040 41820024 813d017c
7d094a78 7d290074 7929d182 394a0020 <0b090000> 40e2ff68 4bffffa4 39200000
Kernel panic - not syncing: Fatal exception
Call Trace:
[c000000175cab560] [c000000000012e04] .show_stack+0x74/0x1c0 (unreliable)
[c000000175cab610] [c0000000005a365c] .panic+0x80/0x1b4
[c000000175cab6a0] [c00000000002fbcc] .die+0x21c/0x2a0
[c000000175cab750] [c000000000030000] ._exception+0x110/0x220
[c000000175cab910] [c000000000004b9c] program_check_common+0x11c/0x180
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The unix_dgram_recvmsg and unix_stream_recvmsg routines in
net/af_unix.c utilize mutex_lock(&u->readlock) calls in order to
serialize read operations of multiple threads on a single socket. This
implies that, if all n threads of a process block in an AF_UNIX recv
call trying to read data from the same socket, one of these threads
will be sleeping in state TASK_INTERRUPTIBLE and all others in state
TASK_UNINTERRUPTIBLE. Provided that a particular signal is supposed to
be handled by a signal handler defined by the process and that none of
this threads is blocking the signal, the complete_signal routine in
kernel/signal.c will select the 'first' such thread it happens to
encounter when deciding which thread to notify that a signal is
supposed to be handled and if this is one of the TASK_UNINTERRUPTIBLE
threads, the signal won't be handled until the one thread not blocking
on the u->readlock mutex is woken up because some data to process has
arrived (if this ever happens). The included patch fixes this by
changing mutex_lock to mutex_lock_interruptible and handling possible
error returns in the same way interruptions are handled by the actual
receive-code.
Signed-off-by: NRainer Weikusat <rweikusat@mobileactivedefense.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

exthdrs_core.c and addrconf_core.c in net/ipv6/ contain bits which
must be made available even if IPv6 is disabled.

net/ipv6/Makefile already correctly includes them if CONFIG_IPV6=n
but net/Makefile prevents entering the subdirectory.
Signed-off-by: NThomas Graf <tgraf@infradead.org>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The standby logic used to be pretty dependent on the work requeueing
behavior that changed when we switched to WQ_NON_REENTRANT.  It was also
very fragile.

Restructure things so that:
 - We clear WRITE_PENDING when we set STANDBY.  This ensures we will
   requeue work when we wake up later.
 - con_work backs off if STANDBY is set.  There is nothing to do if we are
   in standby.
 - clear_standby() helper is called by both con_send() and con_keepalive(),
   the two actions that can wake us up again.  Move the connect_seq++
   logic here.
Signed-off-by: NSage Weil <sage@newdream.net>

There was some broken keepalive code using a dead variable.  Shift to using
the proper bit flag.
Signed-off-by: NSage Weil <sage@newdream.net>

With commit f363e45f we replaced a bunch of hacky workqueue mutual
exclusion logic with the WQ_NON_REENTRANT flag.  One pieces of fallout is
that the exponential backoff breaks in certain cases:

 * con_work attempts to connect.
 * we get an immediate failure, and the socket state change handler queues
   immediate work.
 * con_work calls con_fault, we decide to back off, but can't queue delayed
   work.

In this case, we add a BACKOFF bit to make con_work reschedule delayed work
next time it runs (which should be immediately).
Signed-off-by: NSage Weil <sage@newdream.net>

When a DNS resolver key is instantiated with an error indication, attempts to
read that key will result in an oops because user_read() is expecting there to
be a payload - and there isn't one [CVE-2011-1076].

Give the DNS resolver key its own read handler that returns the error cached in
key->type_data.x[0] as an error rather than crashing.

Also make the kenter() at the beginning of dns_resolver_instantiate() limit the
amount of data it prints, since the data is not necessarily NUL-terminated.

The buggy code was added in:

	commit 4a2d7892
	Author: Wang Lei <wang840925@gmail.com>
	Date:   Wed Aug 11 09:37:58 2010 +0100
	Subject: DNS: If the DNS server returns an error, allow that to be cached [ver #2]

This can trivially be reproduced by any user with the following program
compiled with -lkeyutils:

	#include <stdlib.h>
	#include <keyutils.h>
	#include <err.h>
	static char payload[] = "#dnserror=6";
	int main()
	{
		key_serial_t key;
		key = add_key("dns_resolver", "a", payload, sizeof(payload),
			      KEY_SPEC_SESSION_KEYRING);
		if (key == -1)
			err(1, "add_key");
		if (keyctl_read(key, NULL, 0) == -1)
			err(1, "read_key");
		return 0;
	}

What should happen is that keyctl_read() reports error 6 (ENXIO) to the user:

	dns-break: read_key: No such device or address

but instead the kernel oopses.

This cannot be reproduced with the 'keyutils add' or 'keyutils padd' commands
as both of those cut the data down below the NUL termination that must be
included in the data.  Without this dns_resolver_instantiate() will return
-EINVAL and the key will not be instantiated such that it can be read.

The oops looks like:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: [<ffffffff811b99f7>] user_read+0x4f/0x8f
PGD 3bdf8067 PUD 385b9067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:19.0/irq
CPU 0
Modules linked in:

Pid: 2150, comm: dns-break Not tainted 2.6.38-rc7-cachefs+ #468                  /DG965RY
RIP: 0010:[<ffffffff811b99f7>]  [<ffffffff811b99f7>] user_read+0x4f/0x8f
RSP: 0018:ffff88003bf47f08  EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff88003b5ea378 RCX: ffffffff81972368
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003b5ea378
RBP: ffff88003bf47f28 R08: ffff88003be56620 R09: 0000000000000000
R10: 0000000000000395 R11: 0000000000000002 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffffffffa1
FS:  00007feab5751700(0000) GS:ffff88003e000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000003de40000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process dns-break (pid: 2150, threadinfo ffff88003bf46000, task ffff88003be56090)
Stack:
 ffff88003b5ea378 ffff88003b5ea3a0 0000000000000000 0000000000000000
 ffff88003bf47f68 ffffffff811b708e ffff88003c442bc8 0000000000000000
 00000000004005a0 00007fffba368060 0000000000000000 0000000000000000
Call Trace:
 [<ffffffff811b708e>] keyctl_read_key+0xac/0xcf
 [<ffffffff811b7c07>] sys_keyctl+0x75/0xb6
 [<ffffffff81001f7b>] system_call_fastpath+0x16/0x1b
Code: 75 1f 48 83 7b 28 00 75 18 c6 05 58 2b fb 00 01 be bb 00 00 00 48 c7 c7 76 1c 75 81 e8 13 c2 e9 ff 4c 8b b3 e0 00 00 00 4d 85 ed <41> 0f b7 5e 10 74 2d 4d 85 e4 74 28 e8 98 79 ee ff 49 39 dd 48
RIP  [<ffffffff811b99f7>] user_read+0x4f/0x8f
 RSP <ffff88003bf47f08>
CR2: 0000000000000010
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NJeff Layton <jlayton@redhat.com>
cc: Wang Lei <wang840925@gmail.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

If we mark the connection CLOSED we will give up trying to reconnect to
this server instance.  That is appropriate for things like a protocol
version mismatch that won't change until the server is restarted, at which
point we'll get a new addr and reconnect.  An authorization failure like
this is probably due to the server not properly rotating it's secret keys,
however, and should be treated as transient so that the normal backoff and
retry behavior kicks in.
Signed-off-by: NSage Weil <sage@newdream.net>

get_user_pages() can return fewer pages than we ask for.  We were returning
a bogus pointer/error code in that case.  Instead, loop until we get all
the pages we want or get an error we can return to the caller.
Signed-off-by: NSage Weil <sage@newdream.net>

The OpenAFS server is now sending ACKALL packets, so we need to handle them.
Otherwise we report a protocol error and abort.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The incorrect ops routine was being tested for in
DCB_ATTR_IEEE_PFC attributes. This patch corrects
it.

Currently, every driver implementing ieee_setets also
implements ieee_setpfc so this bug is not actualized
yet.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like many other places, we have to check that the array index is
within allowed limits, or otherwise, a kernel oops and other nastiness
can ensue when we access memory beyond the end of the array.

[ 5954.115381] BUG: unable to handle kernel paging request at 0000004000000000
[ 5954.120014] IP:  __find_logger+0x6f/0xa0
[ 5954.123979]  nf_log_bind_pf+0x2b/0x70
[ 5954.123979]  nfulnl_recv_config+0xc0/0x4a0 [nfnetlink_log]
[ 5954.123979]  nfnetlink_rcv_msg+0x12c/0x1b0 [nfnetlink]
...

The problem goes back to v2.6.30-rc1~1372~1342~31 where nf_log_bind
was decoupled from nf_log_register.

Reported-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>,
  via irc.freenode.net/#netfilter
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

This fixes a bug in the order of dccp_rcv_state_process() that still permitted
reception even after closing the socket. A Reset after close thus causes a NULL
pointer dereference by not preventing operations on an already torn-down socket.

 dccp_v4_do_rcv() 
	|
	| state other than OPEN
	v
 dccp_rcv_state_process()
	|
	| DCCP_PKT_RESET
	v
 dccp_rcv_reset()
	|
	v
 dccp_time_wait()

 WARNING: at net/ipv4/inet_timewait_sock.c:141 __inet_twsk_hashdance+0x48/0x128()
 Modules linked in: arc4 ecb carl9170 rt2870sta(C) mac80211 r8712u(C) crc_ccitt ah
 [<c0038850>] (unwind_backtrace+0x0/0xec) from [<c0055364>] (warn_slowpath_common)
 [<c0055364>] (warn_slowpath_common+0x4c/0x64) from [<c0055398>] (warn_slowpath_n)
 [<c0055398>] (warn_slowpath_null+0x1c/0x24) from [<c02b72d0>] (__inet_twsk_hashd)
 [<c02b72d0>] (__inet_twsk_hashdance+0x48/0x128) from [<c031caa0>] (dccp_time_wai)
 [<c031caa0>] (dccp_time_wait+0x40/0xc8) from [<c031c15c>] (dccp_rcv_state_proces)
 [<c031c15c>] (dccp_rcv_state_process+0x120/0x538) from [<c032609c>] (dccp_v4_do_)
 [<c032609c>] (dccp_v4_do_rcv+0x11c/0x14c) from [<c0286594>] (release_sock+0xac/0)
 [<c0286594>] (release_sock+0xac/0x110) from [<c031fd34>] (dccp_close+0x28c/0x380)
 [<c031fd34>] (dccp_close+0x28c/0x380) from [<c02d9a78>] (inet_release+0x64/0x70)

The fix is by testing the socket state first. Receiving a packet in Closed state
now also produces the required "No connection" Reset reply of RFC 4340, 8.3.1.
Reported-and-tested-by: NJohan Hovold <jhovold@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

	Fix dst_lock usage in __ip_vs_update_dest. We need
_bh locking because destination is updated in user context.
Can cause lockups on frequent destination updates.
Problem reported by Simon Kirby. Bug was introduced
in 2.6.37 from the "ipvs: changes for local real server"
change.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

netlink_dump() may failed, but nobody handle its error.
It generates output data, when a previous portion has been returned to
user space. This mechanism works when all data isn't go in skb. If we
enter in netlink_recvmsg() and skb is absent in the recv queue, the
netlink_dump() will not been executed. So if netlink_dump() is failed
one time, the new data never appear and the reader will sleep forever.

netlink_dump() is called from two places:

1. from netlink_sendmsg->...->netlink_dump_start().
   In this place we can report error directly and it will be returned
   by sendmsg().

2. from netlink_recvmsg
   There we can't report error directly, because we have a portion of
   valid output data and call netlink_dump() for prepare the next portion.
   If netlink_dump() is failed, the socket will be mark as error and the
   next recvmsg will be failed.
Signed-off-by: NAndrey Vagin <avagin@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

addr_type of 0 means that the type should be adopted from from_dev and
not from __hw_addr_del_multiple(). Unfortunately it isn't so and
addr_type will always be considered. Fix this by implementing the
considered and documented behavior.
Signed-off-by: NHagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With slab poisoning enabled, I see the following oops:

  Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6b73
  ...
  NIP [c0000000006bc61c] .rxrpc_destroy+0x44/0x104
  LR [c0000000006bc618] .rxrpc_destroy+0x40/0x104
  Call Trace:
  [c0000000feb2bc00] [c0000000006bc618] .rxrpc_destroy+0x40/0x104 (unreliable)
  [c0000000feb2bc90] [c000000000349b2c] .key_cleanup+0x1a8/0x20c
  [c0000000feb2bd40] [c0000000000a2920] .process_one_work+0x2f4/0x4d0
  [c0000000feb2be00] [c0000000000a2d50] .worker_thread+0x254/0x468
  [c0000000feb2bec0] [c0000000000a868c] .kthread+0xbc/0xc8
  [c0000000feb2bf90] [c000000000020e00] .kernel_thread+0x54/0x70

We aren't initialising token->next, but the code in destroy_context relies
on the list being NULL terminated. Use kzalloc to zero out all the fields.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Before this patch issuing these commands:

  fd = open("/proc/sys/net/ipv6/route/flush")
  unshare(CLONE_NEWNET)
  write(fd, "stuff")

would flush the newly created net, not the original one.

The equivalent ipv4 code is correct (stores the net inside ->extra1).
Acked-by: NDaniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the bridge multicast snooping feature periodically issues
IPv6 general multicast listener queries to sense the absence of a
listener.

For this, it uses :: as its source address - however RFC 2710 requires:
"To be valid, the Query message MUST come from a link-local IPv6 Source
Address". Current Linux kernel versions seem to follow this requirement
and ignore our bogus MLD queries.

With this commit a link local address from the bridge interface is being
used to issue the MLD query, resulting in other Linux devices which are
multicast listeners in the network to respond with a MLD response (which
was not the case before).
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Map the IPv6 header's destination multicast address to an ethernet
source address instead of the MLD queries multicast address.

For instance for a general MLD query (multicast address in the MLD query
set to ::), this would wrongly be mapped to 33:33:00:00:00:00, although
an MLD queries destination MAC should always be 33:33:00:00:00:01 which
matches the IPv6 header's multicast destination ff02::1.
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the multicast bridge snooping support is not active for
link local multicast. I assume this has been done to leave
important multicast data untouched, like IPv6 Neighborhood Discovery.

In larger, bridged, local networks it could however be desirable to
optimize for instance local multicast audio/video streaming too.

With the transient flag in IPv6 multicast addresses we have an easy
way to optimize such multimedia traffic without tempering with the
high priority multicast data from well-known addresses.

This patch alters the multicast bridge snooping for IPv6, to take
effect for transient multicast addresses instead of non-link-local
addresses.
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The nsrcs number is 2 Byte wide, therefore we need to call ntohs()
before using it.
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We actually want a pointer to the grec_nsrcr and not the following
field. Otherwise we can get very high values for *nsrcs as the first two
bytes of the IPv6 multicast address are being used instead, leading to
a failing pskb_may_pull() which results in MLDv2 reports not being
parsed.
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The protocol type for IPv6 entries in the hash table for multicast
bridge snooping is falsely set to ETH_P_IP, marking it as an IPv4
address, instead of setting it to ETH_P_IPV6, which results in negative
look-ups in the hash table later.
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I previously managed to reproduce a hang while scanning wireless
channels (reproducible with airodump-ng hopping channels); subsequent
lockdep instrumentation revealed a lock ordering issue.

Without knowing the design intent, it looks like the locks should be
taken in reverse order; please comment.

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.38-rc5-341cd #4
-------------------------------------------------------
airodump-ng/15445 is trying to acquire lock:
 (&rdev->devlist_mtx){+.+.+.}, at: [<ffffffff816b1266>]
cfg80211_wext_siwfreq+0xc6/0x100

but task is already holding lock:
 (&wdev->mtx){+.+.+.}, at: [<ffffffff816b125c>] cfg80211_wext_siwfreq+0xbc/0x100

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&wdev->mtx){+.+.+.}:
       [<ffffffff810a79d6>] lock_acquire+0xc6/0x280
       [<ffffffff816d6bce>] mutex_lock_nested+0x6e/0x4b0
       [<ffffffff81696080>] cfg80211_netdev_notifier_call+0x430/0x5f0
       [<ffffffff8109351b>] notifier_call_chain+0x8b/0x100
       [<ffffffff810935b1>] raw_notifier_call_chain+0x11/0x20
       [<ffffffff81576d92>] call_netdevice_notifiers+0x32/0x60
       [<ffffffff815771a4>] __dev_notify_flags+0x34/0x80
       [<ffffffff81577230>] dev_change_flags+0x40/0x70
       [<ffffffff8158587c>] do_setlink+0x1fc/0x8d0
       [<ffffffff81586042>] rtnl_setlink+0xf2/0x140
       [<ffffffff81586923>] rtnetlink_rcv_msg+0x163/0x270
       [<ffffffff8159d741>] netlink_rcv_skb+0xa1/0xd0
       [<ffffffff815867b0>] rtnetlink_rcv+0x20/0x30
       [<ffffffff8159d39a>] netlink_unicast+0x2ba/0x300
       [<ffffffff8159dd57>] netlink_sendmsg+0x267/0x3e0
       [<ffffffff8155e364>] sock_sendmsg+0xe4/0x110
       [<ffffffff8155f3a3>] sys_sendmsg+0x253/0x3b0
       [<ffffffff81003192>] system_call_fastpath+0x16/0x1b

-> #0 (&rdev->devlist_mtx){+.+.+.}:
       [<ffffffff810a7222>] __lock_acquire+0x1622/0x1d10
       [<ffffffff810a79d6>] lock_acquire+0xc6/0x280
       [<ffffffff816d6bce>] mutex_lock_nested+0x6e/0x4b0
       [<ffffffff816b1266>] cfg80211_wext_siwfreq+0xc6/0x100
       [<ffffffff816b2fad>] ioctl_standard_call+0x5d/0xd0
       [<ffffffff816b3223>] T.808+0x163/0x170
       [<ffffffff816b326a>] wext_handle_ioctl+0x3a/0x90
       [<ffffffff815798d2>] dev_ioctl+0x6f2/0x830
       [<ffffffff8155cf3d>] sock_ioctl+0xfd/0x290
       [<ffffffff8117dffd>] do_vfs_ioctl+0x9d/0x590
       [<ffffffff8117e53a>] sys_ioctl+0x4a/0x80
       [<ffffffff81003192>] system_call_fastpath+0x16/0x1b

other info that might help us debug this:

2 locks held by airodump-ng/15445:
 #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff81586782>] rtnl_lock+0x12/0x20
 #1:  (&wdev->mtx){+.+.+.}, at: [<ffffffff816b125c>]
cfg80211_wext_siwfreq+0xbc/0x100

stack backtrace:
Pid: 15445, comm: airodump-ng Not tainted 2.6.38-rc5-341cd #4
Call Trace:
 [<ffffffff810a3f0a>] ? print_circular_bug+0xfa/0x100
 [<ffffffff810a7222>] ? __lock_acquire+0x1622/0x1d10
 [<ffffffff810a1f99>] ? trace_hardirqs_off_caller+0x29/0xc0
 [<ffffffff810a79d6>] ? lock_acquire+0xc6/0x280
 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100
 [<ffffffff810a31d7>] ? mark_held_locks+0x67/0x90
 [<ffffffff816d6bce>] ? mutex_lock_nested+0x6e/0x4b0
 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100
 [<ffffffff810a31d7>] ? mark_held_locks+0x67/0x90
 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100
 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100
 [<ffffffff816b2fad>] ? ioctl_standard_call+0x5d/0xd0
 [<ffffffff8157818b>] ? __dev_get_by_name+0x9b/0xc0
 [<ffffffff816b2f50>] ? ioctl_standard_call+0x0/0xd0
 [<ffffffff816b3223>] ? T.808+0x163/0x170
 [<ffffffff8112ddf2>] ? might_fault+0x72/0xd0
 [<ffffffff816b326a>] ? wext_handle_ioctl+0x3a/0x90
 [<ffffffff8112de3b>] ? might_fault+0xbb/0xd0
 [<ffffffff815798d2>] ? dev_ioctl+0x6f2/0x830
 [<ffffffff810a1bae>] ? put_lock_stats+0xe/0x40
 [<ffffffff810a1c8c>] ? lock_release_holdtime+0xac/0x150
 [<ffffffff8155cf3d>] ? sock_ioctl+0xfd/0x290
 [<ffffffff8117dffd>] ? do_vfs_ioctl+0x9d/0x590
 [<ffffffff8116c8ff>] ? fget_light+0x1df/0x3c0
 [<ffffffff8117e53a>] ? sys_ioctl+0x4a/0x80
 [<ffffffff81003192>] ? system_call_fastpath+0x16/0x1b
Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Fix a bug that undo_retrans is incorrectly decremented when undo_marker is
not set or undo_retrans is already 0. This happens when sender receives
more DSACK ACKs than packets retransmitted during the current
undo phase. This may also happen when sender receives DSACK after
the undo operation is completed or cancelled.

Fix another bug that undo_retrans is incorrectly incremented when
sender retransmits an skb and tcp_skb_pcount(skb) > 1 (TSO). This case
is rare but not impossible.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Eric W. Biederman <ebiederm@xmission.com>

In the beginning with batching unreg_list was a list that was used only
once in the lifetime of a network device (I think).  Now we have calls
using the unreg_list that can happen multiple times in the life of a
network device like dev_deactivate and dev_close that are also using the
unreg_list.  In addition in unregister_netdevice_queue we also do a
list_move because for devices like veth pairs it is possible that
unregister_netdevice_queue will be called multiple times.

So I think the change below to fix dev_deactivate which Eric D. missed
will fix this problem.  Now to go test that.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 5fa782c2 re-worked the
handling of unknown parameters. sctp_init_cause_fixed() can now
return -ENOSPC if there is not enough tailroom in the error
chunk skb. When this happens, the error header is not appended to
the error chunk. In that case, the payload of the unknown parameter
should not be appended either.
Signed-off-by: NJiri Bohac <jbohac@suse.cz>
Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric W. Biederman reported a lockdep splat in inet_twsk_deschedule()

This is caused by inet_twsk_purge(), run from process context,
and commit 575f4cd5 (net: Use rcu lookups in inet_twsk_purge.)
removed the BH disabling that was necessary.

Add the BH disabling but fine grained, right before calling
inet_twsk_deschedule(), instead of whole function.

With help from Linus Torvalds and Eric W. Biederman
Reported-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Daniel Lezcano <daniel.lezcano@free.fr>
CC: Pavel Emelyanov <xemul@openvz.org>
CC: Arnaldo Carvalho de Melo <acme@redhat.com>
CC: stable <stable@kernel.org> (# 2.6.33+)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Low level driver could pass rx frames to us after disassociate, what
can lead to run conn_mon_timer by ieee80211_sta_rx_notify(). That
is obviously wrong, but nothing happens until we unload modules and
resources are used after free. If kernel debugging is enabled following
warning could be observed:

WARNING: at lib/debugobjects.c:259 debug_print_object+0x65/0x70()
Hardware name: HP xw8600 Workstation
ODEBUG: free active (active state 0) object type: timer_list
Modules linked in: iwlagn(-) iwlcore mac80211 cfg80211 aes_x86_64 aes_generic fuse cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ext3 jbd dm_mirror dm_region_hash dm_log dm_mod uinput hp_wmi sparse_keymap sg wmi arc4 microcode serio_raw ecb tg3 shpchp rfkill ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif firewire_ohci firewire_core crc_itu_t mptsas mptscsih mptbase scsi_transport_sas ahci libahci pata_acpi ata_generic ata_piix floppy nouveau ttm drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: cfg80211]
Pid: 13827, comm: rmmod Tainted: G        W   2.6.38-rc4-wl+ #22
Call Trace:
 [<ffffffff810649cf>] ? warn_slowpath_common+0x7f/0xc0
 [<ffffffff81064ac6>] ? warn_slowpath_fmt+0x46/0x50
 [<ffffffff81226fc5>] ? debug_print_object+0x65/0x70
 [<ffffffff81227625>] ? debug_check_no_obj_freed+0x125/0x210
 [<ffffffff8109ebd7>] ? debug_check_no_locks_freed+0xf7/0x170
 [<ffffffff81156092>] ? kfree+0xc2/0x2f0
 [<ffffffff813ec5c5>] ? netdev_release+0x45/0x60
 [<ffffffff812f1067>] ? device_release+0x27/0xa0
 [<ffffffff81216ddd>] ? kobject_release+0x8d/0x1a0
 [<ffffffff81216d50>] ? kobject_release+0x0/0x1a0
 [<ffffffff812183b7>] ? kref_put+0x37/0x70
 [<ffffffff81216c57>] ? kobject_put+0x27/0x60
 [<ffffffff813d5d1b>] ? netdev_run_todo+0x1ab/0x270
 [<ffffffff813e771e>] ? rtnl_unlock+0xe/0x10
 [<ffffffffa0581188>] ? ieee80211_unregister_hw+0x58/0x120 [mac80211]
 [<ffffffffa0377ed7>] ? iwl_pci_remove+0xdb/0x22a [iwlagn]
 [<ffffffff8123cde2>] ? pci_device_remove+0x52/0x120
 [<ffffffff812f5205>] ? __device_release_driver+0x75/0xe0
 [<ffffffff812f5348>] ? driver_detach+0xd8/0xe0
 [<ffffffff812f4111>] ? bus_remove_driver+0x91/0x100
 [<ffffffff812f5b62>] ? driver_unregister+0x62/0xa0
 [<ffffffff8123d194>] ? pci_unregister_driver+0x44/0xa0
 [<ffffffffa0377df5>] ? iwl_exit+0x15/0x1c [iwlagn]
 [<ffffffff810ab492>] ? sys_delete_module+0x1a2/0x270
 [<ffffffff81498889>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff8100bf42>] ? system_call_fastpath+0x16/0x1b
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

commit 9b5e383c (net: Introduce
unregister_netdevice_many()) left an active LIST_HEAD() in
rollback_registered(), with possible memory corruption.

Even if device is freed without touching its unreg_list (and therefore
touching the previous memory location holding LISTE_HEAD(single), better
close the bug for good, since its really subtle.

(Same fix for default_device_exit_batch() for completeness)
Reported-by: NMichal Hocko <mhocko@suse.cz>
Tested-by: NMichal Hocko <mhocko@suse.cz>
Reported-by: NEric W. Biderman <ebiderman@xmission.com>
Tested-by: NEric W. Biderman <ebiderman@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Octavian Purdila <opurdila@ixiacom.com>
CC: stable <stable@kernel.org> [.33+]
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric W. Biderman and Michal Hocko reported various memory corruptions
that we suspected to be related to a LIST head located on stack, that
was manipulated after thread left function frame (and eventually exited,
so its stack was freed and reused).

Eric Dumazet suggested the problem was probably coming from commit
44345724 (net: factorize
sync-rcu call in unregister_netdevice_many)

This patch fixes __dev_close() and dev_close() to properly deinit their
respective LIST_HEAD(single) before exiting.

References: https://lkml.org/lkml/2011/2/16/304
References: https://lkml.org/lkml/2011/2/14/223Reported-by: NMichal Hocko <mhocko@suse.cz>
Tested-by: NMichal Hocko <mhocko@suse.cz>
Reported-by: NEric W. Biderman <ebiderman@xmission.com>
Tested-by: NEric W. Biderman <ebiderman@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 0dbaee3b (net: Abstract default ADVMSS behind an
accessor.) introduced a possible crash in tcp_connect_init(), when
dst->default_advmss() is called from dst_metric_advmss()
Reported-by: NGeorge Spelvin <linux@horizon.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The flaw was in skipping the second byte in MAC header due to increasing
the pointer AND indexed access starting at '1'.
Signed-off-by: NJoerg Marx <joerg.marx@secunet.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>