sg_miter_start() is currently unaware of the direction of the copy
process (to or from the scatter list). It is important to know the
direction because the page has to be flushed in case the data written
is seen on a different mapping in user land on cache incoherent
architectures.
Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc>
Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing/stat: Fix seqfile memory leak
  function-graph: Fix seqfile memory leak
  trace_stack: Fix seqfile memory leak
  profile: Suppress warning about large allocations when profile=1 is specified

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: be more polite in the async caching threads
  Btrfs: preserve commit_root for async caching

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dmaengine: at_hdmac: add DMA slave transfers
  dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller
  dmaengine: dmatest: correct thread_count while using multiple thread per channel
  dmaengine: dmatest: add a maximum number of test iterations
  drivers/dma: Remove unnecessary semicolons
  drivers/dma/fsldma.c: Remove unnecessary semicolons
  dmaengine: move HIGHMEM64G restriction to ASYNC_TX_DMA
  fsldma: do not clear bandwidth control bits on the 83xx controller
  fsldma: enable external start for the 83xx controller
  fsldma: use PCI Read Multiple command

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: Fix loading of VAT inode when drive wrongly reports number of recorded blocks

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6:
  quota: Silence lockdep on quota_on

* git://git.infradead.org/users/cbou/battery-2.6.31:
  Add ds2782 battery gas gauge driver
  olpc_battery: Ensure that the TRICKLE bit is checked
  olpc_battery: Fix up eeprom read function

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: remove dcache entries for remote deleted inodes
  GFS2: Fix incorrent statfs consistency check
  GFS2: Don't put unlikely reclaim candidates on the reclaim list.
  GFS2: Don't try and dealloc own inode
  GFS2: Fix panic in glock memory shrinker
  GFS2: keep statfs info in sync on grows
  GFS2: Shrink the shrinker

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx
  powerpc/86xx: Update GE Fanuc sbc310 default configuration
  powerpc/86xx: Update defconfig for GE Fanuc's PPC9A
  cpm_uart: Don't use alloc_bootmem in cpm_uart_cpm2.c
  powerpc/83xx: Fix PCI IO base address on MPC837xE-RDB boards
  powerpc/85xx: Don't scan for TBI PHY addresses on MPC8569E-MDS boards
  powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boards
  powerpc/mm: Fix SMP issue with MMU context handling code

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest and virtio: cleanup struct definitions to Linux style.
  lguest: update commentry
  lguest: fix comment style
  virtio: refactor find_vqs
  virtio: delete vq from list
  virtio: fix memory leak on device removal
  lguest: fix descriptor corruption in example launcher
  lguest: dereferencing freed mem in add_eventfd()

Use kernel_text_address() for checking probe address instead of
__kernel_text_address(), because __kernel_text_address() returns true
for init functions even after relaseing those functions.

That will hit a BUG() in text_poke().
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Not that anybody can blame him.  It's a morass.  But hey, it's way
better than it _used_ to be, though, so thanks for all the fish.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit d01730d7 didn't completely fix
the problem since we still take dqio_mutex and i_mutex in the wrong
order. Move taking of i_mutex further down (luckily it's needed only
for updating inode flags) below where dqio_mutex is taken.
Tested-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: NJan Kara <jack@suse.cz>

VAT inode is located in the last block recorded block of the medium. When the
drive errorneously reports number of recorded blocks, we failed to load the VAT
inode and thus mount the medium. This patch makes kernel try to read VAT inode
from the last block of the device if it is different from the last recorded
block.
Signed-off-by: NJan Kara <jack@suse.cz>

The semaphore used by the async caching threads can prevent a
transaction commit, which can make the FS appear to stall.  This
releases the semaphore more often when a transaction commit is
in progress.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The async block group caching code uses the commit_root pointer
to get a stable version of the extent allocation tree for scanning.
This copy of the tree root isn't going to change and it significantly
reduces the complexity of the scanning code.

During a commit, we have a loop where we update the extent allocation
tree root.  We need to loop because updating the root pointer in
the tree of tree roots may allocate blocks which may change the
extent allocation tree.

Right now the commit_root pointer is changed inside this loop.  It
is more correct to change the commit_root pointer only after all the
looping is done.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When a file is deleted from a gfs2 filesystem on one node, a dcache
entry for it may still exist on other nodes in the cluster. If this
happens, gfs2 will be unable to free this file on disk. Because of this,
it's possible to have a gfs2 filesystem with no files on it and no free
space. With this patch, when a node receives a callback notifying it
that the file is being deleted on another node, it schedules a new
workqueue thread to remove the file's dcache entry.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Since both linked and unlinked inodes are counted by rgd->rd_dinodes, It
makes no sense to count them with the used data blocks (first check that
I changed), it makes sense to count them with the linked inodes (second
check), and it makes no sense to care if there are more unlinked inodes
than linked ones. This fixes these errors.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

GFS2 was placing far too many glocks on the reclaim list that were not good
candidates for freeing up from cache.  These locks would sit there and
repeatedly get scanned to see if they could be reclaimed, wasting a lot
of time when there was memory pressure. This fix does more checks on the
locks to see if they are actually likely to be removable from cache.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

When searching for unlinked, but still allocated inodes during block
allocation, avoid the block relating to the inode that is doing the
allocation. This fixes a hang caused when an unlinked, but still
open, inode tries to allocate some more blocks and lands up
finding itself during the search for deallocatable inodes.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

It is possible for gfs2_shrink_glock_memory() to check a glock for
demotion
that's in the process of being freed by gfs2_glock_put().  In this case,
gfs2_shrink_glock_memory() will acquire a new reference to this glock,
and
then try to free the glock itself when it drops the refernce.  To solve
this, gfs2_shrink_glock_memory() just needs to check if the glock is in
the process of being freed, and if so skip it without ever unlocking the
lru_lock.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Acked-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

GFS2 wasn't syncing its statfs info on grows.  This causes a problem
when you grow the filesystem on multiple nodes.  GFS2 would calculate
the new space based on the resource groups (which are always current),
and then assume that the filesystem had grown the from the existing
statfs size.  If you grew the filesystem on two different nodes in a
short time, the second node wouldn't see the statfs size change from the
first node, and would assume that it was grown by a larger amount than
it was.  When all these changes were synced out, the total fileystem
size would be incorrect (the first grow would be counted twice).

This patch syncs makes GFS2 read in the statfs changes from disk before
a grow, and write them out after the grow, while the master statfs inode
is locked.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch removes some of the special cases that the shrinker
was trying to deal with. As a result we leave fewer items on
the list and none at all which cannot be demoted. This makes
the list scanning more efficient and solves some issues seen
with large numbers of inodes.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

I've been doing this for years, and akpm picked me up on it about 12
months ago.  lguest partly serves as example code, so let's do it Right.

Also, remove two unused fields in struct vblk_info in the example launcher.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>

Every so often, after code shuffles, I need to go through and unbitrot
the Lguest Journey (see drivers/lguest/README).  Since we now use RCU in
a simple form in one place I took the opportunity to expand that explanation.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>

I don't really notice it (except to begrudge the extra vertical
space), but Ingo does.  And he pointed out that one excuse of lguest
is as a teaching tool, it should set a good example.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>

This refactors find_vqs, making it more readable and robust, and fixing
two regressions from 2.6.30:
- double free_irq causing BUG_ON on device removal
- probe failure when vq can't be assigned to msi-x vector
  (reported on old host kernels)
Tested-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This makes delete vq the reverse of find vq.
This is required to make it possible to retry find_vqs
after a failure, otherwise the list gets corrupted.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Make vp_free_vectors do the reverse of vq_request_vectors.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

1d589bb1 "Add serial number support
for virtio_blk, V4a" extended 'struct virtio_blk_config' to 536 bytes.
Lguest and S/390 both use an 8 bit value for the feature length, and
this change broke them (if the code is naive).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: John Cooper <john.cooper@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>

"new" was freed and then dereferenced.  Also the return value wasn't being
used so I modified the caller as well.

Compile tested only.  Found by smatch (http://repo.or.cz/w/smatch.git).

regards,
dan carpenter
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

General update of defconfig including the following notable changes:
 - Enable Highmem support.
 - Support for PCMCIA based daughter card.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

General update of defconfig including the following notable changes:
 - Enable GPIO access via sysfs on GE Fanuc's PPC9A.
 - Enable Highmem support.
 - Support for PCMCIA based daughter card.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This is another alloc_bootmem() -> kzalloc() change, this time to
fix the non-fatal badness caused when booting with a cpm2_uart console.
Signed-off-by: NMark Ware <mware@elphinstone.net>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

U-Boot maps PCI IO at 0xe0300000, while current dts files specify
0xe2000000. This leads to the following oops with CONFIG_8139TOO_PIO=y.

8139too Fast Ethernet driver 0.9.28
Machine check in kernel mode.
Caused by (from SRR1=41000): Transfer error ack signal
Oops: Machine check, sig: 7 [#1]
MPC837x RDB
[...]
NIP [00000900] 0x900
LR [c0439df8] rtl8139_init_board+0x238/0x524
Call Trace:
[cf831d90] [c0439dcc] rtl8139_init_board+0x20c/0x524 (unreliable)
[cf831de0] [c043a15c] rtl8139_init_one+0x78/0x65c
[cf831e40] [c0235250] pci_call_probe+0x20/0x30
[...]

This patch fixes the issue by specifying the correct PCI IO base
address.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Sometimes (e.g. when there are no UEMs attached to a board)
fsl_pq_mdio_find_free() fails to find a spare address for a TBI PHY,
this is because get_phy_id() returns bogus 0x0000ffff values
(0xffffffff is expected), and therefore mdio bus probing fails with
the following message:

  fsl-pq_mdio: probe of e0082120.mdio failed with error -16

And obviously ethernet doesn't work after this.

This patch solves the problem by adding tbi-phy node into mdio node,
so that we won't scan for spare addresses, we'll just use a fixed one.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Linux isn't able to detect link changes on ethernet ports that were
used by U-Boot. This is because U-Boot wrongly clears interrupt
polarity bit (INTPOL, 0x400) in the extended status register (EXT_SR,
0x1b) of Marvell PHYs.

There is no easy way for PHY drivers to know IRQ line polarity (we
could extract it from the device tree and pass it to phydevs, but
that'll be quite a lot of work), so for now just reset the PHYs to
their default states.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

In switch_mmu_context() if we call steal_context_smp() to get a context
to use we shouldn't fall through and than call steal_context_up().  Doing
so can be problematic in that the 'mm' that steal_context_up() ends up
using will not get marked dirty in the stale_map[] for other CPUs that
might have used that mm.  Thus we could end up with stale TLB entries in
the other CPUs that can cause all kinda of havoc.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* 'i2c-fixes-rc4' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-omap: OMAP3430 Silicon Errata 1.153
  i2c-omap: In case of a NACK|ARDY|AL return from the ISR
  i2c-omap: Bug in reading the RXSTAT/TXSTAT values from the I2C_BUFFSTAT register
  i2c-sh_mobile: change module_init() to subsys_initcall()
  i2c: strncpy does not null terminate string
  i2c-s3c2410: s3c24xx_i2c_init: don't clobber IICLC value