- 10 9月, 2009 29 次提交
-
-
由 Avi Kivity 提交于
Instead of reloading the pdptrs on every entry and exit (vmcs writes on vmx, guest memory access on svm) extract them on demand. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Instead of reading the PDPTRs from memory after every exit (which is slow and wrong, as the PDPTRs are stored on the cpu), sync the PDPTRs from memory to the VMCS before entry, and from the VMCS to memory after exit. Do the same for cr3. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
vmx_set_cr3() will call vmx_tlb_flush(), which will flush the ept context. So there is no need to call ept_sync_context() explicitly. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gregory Haskins 提交于
We currently publish the i8254 resources to the pio_bus before the devices are fully initialized. Since we hold the pit_lock, its probably not a real issue. But lets clean this up anyway. Reported-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NGregory Haskins <ghaskins@novell.com> Acked-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gregory Haskins 提交于
We modernize the io_device code so that we use container_of() instead of dev->private, and move the vtable to a separate ops structure (theoretically allows better caching for multiple instances of the same ops structure) Signed-off-by: NGregory Haskins <ghaskins@novell.com> Acked-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gregory Haskins 提交于
We invoke kfree() on a data member instead of the structure. This works today because the kvm_io_device is the first element of the private structure, but this could change in the future, so lets clean this up. Signed-off-by: NGregory Haskins <ghaskins@novell.com> Acked-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Stephen Rothwell 提交于
Fixes a couple of warnings like this one: WARNING: arch/powerpc/kvm/kvm-440.o(.text+0x1e8c): Section mismatch in reference from the function kvmppc_44x_exit() to the function .exit.text:kvmppc_booke_exit() The function kvmppc_44x_exit() references a function in an exit section. Often the function kvmppc_booke_exit() has valid usage outside the exit section and the fix is to remove the __exit annotation of kvmppc_booke_exit. Also add some __init annotations on obvious routines. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
kvm_svm.h is only included from svm.c, so fold it in. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Christian Ehrhardt 提交于
Changing s390 code in kvm_arch_vcpu_load/put come across this header declarations. They are complete duplicates, not even useful forward declarations as nothing using it is in between (maybe it was that in the past). This patch removes the two dispensable lines. Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sheng Yang 提交于
Disable interrupt at interrupt handler and enable it when guest ack is for the level triggered interrupt, to prevent reinjected interrupt. MSI/MSI-X don't need it. One possible problem is multiply same vector interrupt injected between irq handler and scheduled work handler would be merged as one for MSI/MSI-X. But AFAIK, the drivers handle it well. The patch fixed the oplin card performance issue(MSI-X performance is half of MSI/INTx). Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Andre Przywara 提交于
Since AMD does not support sysenter in 64bit mode, the VMCB fields storing the MSRs are truncated to 32bit upon VMRUN/#VMEXIT. So store the values in a separate 64bit storage to avoid truncation. [andre: fix amd->amd migration] Signed-off-by: NChristoph Egger <christoph.egger@amd.com> Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sheng Yang 提交于
We only trap one page for MSI-X entry now, so it's 4k/(128/8) = 256 entries at most. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Christian Ehrhardt 提交于
This patch relocates the variables kvm-s390 uses to track guest mem addr/size. As discussed dropping the variables at struct kvm_arch level allows to use the common vcpu->request based mechanism to reload guest memory if e.g. changes via set_memory_region. The kick mechanism introduced in this series is used to ensure running vcpus leave guest state to catch the update. Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Christian Ehrhardt 提交于
If signal pending is true we exit without updating kvm_run, userspace currently just does nothing and jumps to kvm_run again. Since we did not set an exit_reason we might end up with a random one (whatever was the last exit). Therefore it was possible to e.g. jump to the psw position the last real interruption set. Setting the INTR exit reason ensures that no old psw data is swapped in on reentry. Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Christian Ehrhardt 提交于
To ensure vcpu's come out of guest context in certain cases this patch adds a s390 specific way to kick them out of guest context. Currently it kicks them out to rerun the vcpu_run path in the s390 code, but the mechanism itself is expandable and with a new flag we could also add e.g. kicks to userspace etc. Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jes Sorensen 提交于
Init the itc_offset for all possible vCPUs. The current code by mistake ends up only initializing the offset on vCPU 0. Spotted by Gleb Natapov. Signed-off-by: NJes Sorensen <jes@sgi.com> Acked-by : Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
The in-kernel speaker emulation is only a dummy and also unneeded from the performance point of view. Rather, it takes user space support to generate sound output on the host, e.g. console beeps. To allow this, introduce KVM_CREATE_PIT2 which controls in-kernel speaker port emulation via a flag passed along the new IOCTL. It also leaves room for future extensions of the PIT configuration interface. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gregory Haskins 提交于
KVM provides a complete virtual system environment for guests, including support for injecting interrupts modeled after the real exception/interrupt facilities present on the native platform (such as the IDT on x86). Virtual interrupts can come from a variety of sources (emulated devices, pass-through devices, etc) but all must be injected to the guest via the KVM infrastructure. This patch adds a new mechanism to inject a specific interrupt to a guest using a decoupled eventfd mechnanism: Any legal signal on the irqfd (using eventfd semantics from either userspace or kernel) will translate into an injected interrupt in the guest at the next available interrupt window. Signed-off-by: NGregory Haskins <ghaskins@novell.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Reduce Kconfig code duplication. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
The problem exists only on VMX. Also currently we skip this step if there is pending exception. The patch fixes this too. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Christoph Hellwig 提交于
Use proper foo-y style list additions to cleanup all the conditionals, move module selection after compound object selection and remove the superflous comment. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
The jump target should not be sign extened; use an unsigned decode flag. Cc: stable@kernel.org Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Absolute jumps use zero extended immediate operands. Cc: stable@kernel.org Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Mark McLoughlin 提交于
If we run out of cpuid entries for extended request types we should return -E2BIG, just like we do for the standard request types. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jaswinder Singh Rajput 提交于
Replace 0xc0010010 with MSR_K8_SYSCFG and 0xc0010015 with MSR_K7_HWCR. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Huang Ying 提交于
The related MSRs are emulated. MCE capability is exported via extension KVM_CAP_MCE and ioctl KVM_X86_GET_MCE_CAP_SUPPORTED. A new vcpu ioctl command KVM_X86_SETUP_MCE is used to setup MCE emulation such as the mcg_cap. MCE is injected via vcpu ioctl command KVM_X86_SET_MCE. Extended machine-check state (MCG_EXT_P) and CMCI are not implemented. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jaswinder Singh Rajput 提交于
Use standard msr-index.h's MSR declaration. MSR_IA32_TSC is better than MSR_IA32_TIME_STAMP_COUNTER as it also solves 80 column issue. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
When reinjecting a software interrupt or exception, use the correct instruction length provided by the hardware instead of a hardcoded 1. Fixes problems running the suse 9.1 livecd boot loader. Problem introduced by commit f0a3602c20 ("KVM: Move interrupt injection logic to x86.c"). Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Linus Torvalds 提交于
-
- 09 9月, 2009 3 次提交
-
-
由 Ed Cashin 提交于
Andy Whitcroft reported an oops in aoe triggered by use of an incorrectly initialised request_queue object: [ 2645.959090] kobject '<NULL>' (ffff880059ca22c0): tried to add an uninitialized object, something is seriously wrong. [ 2645.959104] Pid: 6, comm: events/0 Not tainted 2.6.31-5-generic #24-Ubuntu [ 2645.959107] Call Trace: [ 2645.959139] [<ffffffff8126ca2f>] kobject_add+0x5f/0x70 [ 2645.959151] [<ffffffff8125b4ab>] blk_register_queue+0x8b/0xf0 [ 2645.959155] [<ffffffff8126043f>] add_disk+0x8f/0x160 [ 2645.959161] [<ffffffffa01673c4>] aoeblk_gdalloc+0x164/0x1c0 [aoe] The request queue of an aoe device is not used but can be allocated in code that does not sleep. Bruno bisected this regression down to cd43e26f block: Expose stacked device queues in sysfs "This seems to generate /sys/block/$device/queue and its contents for everyone who is using queues, not just for those queues that have a non-NULL queue->request_fn." Addresses http://bugs.launchpad.net/bugs/410198 Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13942 Note that embedding a queue inside another object has always been an illegal construct, since the queues are reference counted and must persist until the last reference is dropped. So aoe was always buggy in this respect (Jens). Signed-off-by: NEd Cashin <ecashin@coraid.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Bruno Premont <bonbons@linux-vserver.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Linus Torvalds 提交于
Reinette Chatre reports a frozen system (with blinking keyboard LEDs) when switching from graphics mode to the text console, or when suspending (which does the same thing). With netconsole, the oops turned out to be BUG: unable to handle kernel NULL pointer dereference at 0000000000000084 IP: [<ffffffffa03ecaab>] i915_driver_irq_handler+0x26b/0xd20 [i915] and it's due to the i915_gem.c code doing drm_irq_uninstall() after having done i915_gem_idle(). And the i915_gem_idle() path will do i915_gem_idle() -> i915_gem_cleanup_ringbuffer() -> i915_gem_cleanup_hws() -> dev_priv->hw_status_page = NULL; but if an i915 interrupt comes in after this stage, it may want to access that hw_status_page, and gets the above NULL pointer dereference. And since the NULL pointer dereference happens from within an interrupt, and with the screen still in graphics mode, the common end result is simply a silently hung machine. Fix it by simply uninstalling the irq handler before idling rather than after. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13819Reported-and-tested-by: NReinette Chatre <reinette.chatre@intel.com> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhenyu Wang 提交于
eDP is exclusive connector too, and add missing crtc_mask setting for TV. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14139Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Reported-and-tested-by: NCarlos R. Mafra <crmafra2@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 9月, 2009 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add LTE/GTE discard + rv515 two sided stencil register.
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: IMA: update ima_counts_put
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: pcmcia: add CNF-CDROM-ID for ide
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: agp/intel: support for new chip variant of IGDNG mobile drm/i915: Unref old_obj on get_fence_reg() error path drm/i915: increase default latency constant (v2 w/comment)
-
- 07 9月, 2009 2 次提交
-
-
由 Dave Airlie 提交于
This adds some rv350+ register for LTE/GTE discard, and enables the rv515 two sided stencil register. It also disables the DEPTHXY_OFFSET register which can be used to workaround the CS checker. Moves rs690 to proper place in rs600 and uses correct table on rs600. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Mimi Zohar 提交于
- As ima_counts_put() may be called after the inode has been freed, verify that the inode is not NULL, before dereferencing it. - Maintain the IMA file counters in may_open() properly, decrementing any counter increments on subsequent errors. Reported-by: NCiprian Docan <docan@eden.rutgers.edu> Reported-by: NJ.R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: NMimi Zohar <zohar@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 06 9月, 2009 1 次提交
-
-
由 David S. Miller 提交于
Reported by Michael Guntsche <mike@it-loops.com> -------------------- Commit 38bddf04 gianfar: gfar_remove needs to call unregister_netdev() breaks the build of the gianfar driver because "dev" is undefined in this function. To quickly test rc9 I changed this to priv->ndev but I do not know if this is the correct one. -------------------- Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-