After switching the MMIO registers to use pci_iomap, remember to dispose
of the mapping with pci_iounmap (for symmetry).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

It should be idle on cleanup anyway...
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

So long as we adhere to the fence registers rules for alignment and no
overlaps (including with unfenced accesses to linear memory) and account
for the tiled access in our size allocation, we do not have to allocate
the full fenced region for the object. This allows us to fight the bloat
tiling imposed on pre-i965 chipsets and frees up RAM for real use. [Inside
the GTT we still suffer the additional alignment constraints, so it doesn't
magic allow us to render larger scenes without stalls -- we need the
expanded GTT and fence pipelining to overcome those...]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Also spotted by Dan Carpenter.

obj->pin_count is unsigned so the BUG_ON(obj->pin_count<0) will never
trigger.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The error code is only expected during the actual pruning and not during
the first measurement (nr_to_scan == 0) pass.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

In order to force a page-fault on a GTT mapping after we start using it
from the GPU and so enforce correct CPU/GPU synchronisation, we need to
invalidate the mapping.

Pointed out by Owain G. Ainsworth.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

By using read_cache_page() for individual pages during pwrite/pread we
can eliminate an unnecessary large allocation (and immediate free) of
obj->pages. Also this eliminates any potential nesting of get/put pages,
simplifying the code and preparing the path for greater things.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Since we rarely use the mmap_offset and it is easily computable from the
obj->map_list.hash, remove it.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Eliminate the racy device unload by embedding a shrinker into each
device. Smaller, simpler code.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Play safe and use the common routines which take care of the cachability
of the memory when setting up the iomapping for the PCI registers.
Whilst they should be cacheable for the current generations, actually
honouring what the device requires is a better long term strategy.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This holds error state from the main graphics arbiter mainly involving
the DMA engine and address translation.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This is the same value as before, but it just makes the code slightly
more readable to use the local variable than converting the aperture
size into bytes every time.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

More precisely: For those that _need_ to be mappable. Also add two
BUG_ONs in fault and pin to check the consistency of the mappable
flag.

Changes in v2:
- Add tracking of gtt mappable space (to notice mappable/unmappable
  balancing issues).
- Improve the mappable working set tracking by tracking fault and pin
  separately.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This way we can make some more educated guesses as to why exactly
we can't use 2G apertures to their full potential ;)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

On VT-d supporting platforms the GGTT is allocated in a stolen mem
section separate from graphcis stolen mem. The GMCH register contains
a bitfield specifying the size of that region. Docs suggest that this
region can only be used for GGTT and PPGTT. Hence ensure that the
PPGTT is disabled and use the complete area for the GGTT.

Unfortunately the graphics core on G33/Pineview can't cope with really
large GTTs and the BIOS usually enables the maximum of 512MB. So
don't bother with maximizing the GTT on these platforms.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

... and switch to a more classical store-reg-on-suspend, restore-on-resume
way of doing things. Obviously this is just preparation for the future,
the code is not there at all, yet.

This is needed because the next patch adjusts this register and everything
in it (not just the pagetable address) needs to be restored on resume.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

At least the part that's currently enabled by the BIOS.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

In i915_gem_object_pin obviously unbind only if mappable is true.

This is the last part to enable gtt_mappable_end != gtt_size, which
the next patch will do.

v2: Fences on g33/pineview only work in the mappable part of the
gtt.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Like before add a parameter mappable (also to gem_object_pin) and
set it depending upon the context. Only bos that are brought into
the gtt due to an execbuffer call can be put into the unmappable
part of the gtt, everything else (especially pinned objects) need
to be put into the mappable part of the gtt.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Add a mappable parameter to i915_gem_evict_something to distinguish
the two cases (non-restricted vs. mappable gtt allocations). No
functional changes because the mappable limit is set to the end of
the gtt currently.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The render ring is not alone any more! And the other rings are just as
troublesome...
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Currently, we believe the GPU is idle if just the RENDER ring is idle.
This is obviously wrong if we only using either the BLT or the BSD
rings and so masking genuine hangs.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

In the event that we fail to dispatch the execbuffer, for example if
there is insufficient space on the ring, we were leaving the objects in
an inconsistent state. Notably they were marked as being in the GPU
write domain, but were not added to the ring or any list. This would
lead to inevitable oops:

[ 1010.522940] [drm:i915_gem_do_execbuffer] *ERROR* dispatch failed -16
[ 1010.523055] BUG: unable to handle kernel NULL pointer dereference at
0000000000000088
[ 1010.523097] IP: [<ffffffff8122d006>] i915_gem_flush_ring+0x26/0x140
[ 1010.523120] PGD 14cf2f067 PUD 14ce04067 PMD 0
[ 1010.523140] Oops: 0000 [#1] SMP
[ 1010.523154] last sysfs file: /sys/devices/virtual/vc/vcsa2/uevent
[ 1010.523173] CPU 0
[ 1010.523183] Pid: 716, comm: X Not tainted 2.6.36+ #34 LosLunas
CRB/SandyBridge Platform
[ 1010.523206] RIP: 0010:[<ffffffff8122d006>]  [<ffffffff8122d006>]
i915_gem_flush_ring+0x26/0x140
[ 1010.523233] RSP: 0018:ffff88014bf97cd8  EFLAGS: 00010296
[ 1010.523249] RAX: ffff88014e2d1808 RBX: 0000000000000000 RCX: 0000000000000000
[ 1010.523270] RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000
[ 1010.523290] RBP: ffff88014e2d1000 R08: 0000000000000002 R09: 00000000400c645f
[ 1010.523311] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002
[ 1010.523331] R13: ffff88014e29a000 R14: 00000000000000c8 R15: ffffffff8162eb28
[ 1010.523352] FS:  00007fc62379d700(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000
[ 1010.523375] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1010.523392] CR2: 0000000000000088 CR3: 000000014bf87000 CR4: 00000000000406f0
[ 1010.523412] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1010.523433] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1010.523454] Process X (pid: 716, threadinfo ffff88014bf96000, task ffff88014cc1ee40)
[ 1010.523475] Stack:
[ 1010.523483]  ffff88014d5199c0 0000000000000200 0000000000000000 ffff88014bcc6400
[ 1010.523509] <0> 0000000000000000 0000000000000001 ffff88014e29a000 ffff88014bcc6400
[ 1010.523537] <0> ffffffff8162eb28 ffffffff8122faa8 ffff88014e29a000 ffff88014bcc6400
[ 1010.523568] Call Trace:
[ 1010.523578]  [<ffffffff8122faa8>] ?  i915_gem_object_flush_gpu_write_domain+0x48/0x80
[ 1010.523601]  [<ffffffff8122fb8e>] ?  i915_gem_object_set_to_gtt_domain+0x2e/0xb0
[ 1010.523623]  [<ffffffff8123113b>] ?  i915_gem_set_domain_ioctl+0xdb/0x1f0
[ 1010.523644]  [<ffffffff8120a3f1>] ? drm_ioctl+0x3d1/0x460
[ 1010.523660]  [<ffffffff81231060>] ?  i915_gem_set_domain_ioctl+0x0/0x1f0
[ 1010.523682]  [<ffffffff81092618>] ?  vma_prio_tree_insert+0x28/0x120
[ 1010.523701]  [<ffffffff8109f379>] ? vma_link+0x99/0xf0
[ 1010.523717]  [<ffffffff810a111d>] ? mmap_region+0x1ed/0x4f0
[ 1010.523734]  [<ffffffff810c306f>] ? do_vfs_ioctl+0x9f/0x580
[ 1010.523750]  [<ffffffff810c3599>] ? sys_ioctl+0x49/0x80
[ 1010.523767]  [<ffffffff810022eb>] ?  system_call_fastpath+0x16/0x1b
[ 1010.523785] Code: 00 00 00 00 00 41 57 89 ce 41 56 41 55 41 54 45 89 c4 55 48 89 fd 53 48 89 d3 44 89 c2 48 89 df 4c 8d b3 c8 00 00 00 48 83 ec 18 <ff> 93 88 00 00 00 48 8b 83 c8 00 00 00 4c 8b bd 30 03 00 00 48
[ 1010.523946] RIP  [<ffffffff8122d006>] i915_gem_flush_ring+0x26/0x140
[ 1010.523966]  RSP <ffff88014bf97cd8>
[ 1010.523977] CR2: 0000000000000088
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Preparing the ringbuffer for adding new commands can fail (a timeout
whilst waiting for the GPU to catch up and free some space). So check
for any potential error before overwriting HEAD with new commands, and
propagate that error back to the user where possible.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The ringbuffer keeps a pointer to the parent device, so we can use that
instead of passing around the pointer on the stack.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Hi,

while I looked through your changes in drm-intel git tree (as I've got
a pressure for supporting DisplayPort audio), I stumbled on the
possible bug in the commit a9756bb5

	Author: Zhenyu Wang <zhenyuw@linux.intel.com>
	Date:   Sun Sep 19 13:09:06 2010 +0800
	drm/i915: Enable DisplayPort audio

In this commit, you changed the return value of g4x_dp_detect()
to "bit", but it should be "status", I suppose.

[ickle: mea culpa.]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31094Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

usbfs_get_inode() is something completely different...

Bogosity introduced by commit 85fe4025 ("fs: do not assign default
i_ino in new_inode").
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use Ben's new range manager hooks to implement a manager for
GMRs that manages ids rather than ranges.
This means we can use the standard TTM code for binding, unbinding and
eviction.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

broken by:
drm/radeon/r600: fix tiling issues in CS checker.

v2: only apply it to 1D tiling case.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Do not enable this Kconfig menu by default since it contains devices not
present on the majority of systems.

This is becoming a pain and a waste of time especially when doing a bunch
of kernel builds on different systems daily and have to answer "make
oldconfig" prompts for strange devices.
Signed-off-by: NBorislav Petkov <bp@alien8.de>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Andres Salomon <dilinger@collabora.co.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>