Content for the 8bit device threaded interrupt handlers.  Depending on the
interrupt line and chip configuration, either click or wakeup / freefall
handler is called.  In case of click, BTN_ event is sent via input device.
 In case of wakeup or freefall, input device ABS_ events are updated
immediatelly.

It is still possible to configure interrupt line 1 for fast freefall
detection and use the second line either for click or threshold based
interrupts.  Or both lines can be used for click / threshold interrupts.

Polled input device can be set to stopped state and still get coordinate
updates via input device using interrupt based method.  Polled mode and
interrupt mode can also be used parallel.

BTN_ events are remapped based on existing axis remapping information.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: NEric Piel <eric.piel@tremplin-utc.net>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Original lis3 driver didn't provide interrupt handler(s) for click or
threshold event handling.  This patch adds threaded handlers for one or
two interrupt lines for 8 bit device.  Actual content for interrupt
handling is provided in the separate patch.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Tested-by: NDaniel Mack <daniel@caiaq.de>
Acked-by: NEric Piel <eric.piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

8 bit device has two wakeup / free fall units.  It was not possible to
configure the second unit.  This patch introduces configuration entry to
the platform data and also corresponding changes to the 8 bit setup
function.

High pass filters were enabled by default.  Patch introduces configuration
option for high pass filter cut off frequency and also possibility to
disable or enable the filter via platform data.  Since the control is a
new one and default state was filter enabled, new option is used to
disable the filter.  This way old platform data is still compatible with
the change.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: NEric Piel <eric.piel@tremplin-utc.net>
Tested-by: NDaniel Mack <daniel@caiaq.de>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Separate configuration function for 8 bit version of the chip.  This way
generic part of the init function stays little bit more readable.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: NEric Piel <eric.piel@tremplin-utc.net>
Tested-by: NDaniel Mack <daniel@caiaq.de>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Definitions for click were missing.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: NEric Piel <eric.piel@tremplin-utc.net>
Tested-by: NDaniel Mack <daniel@caiaq.de>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since crc32.c contains a nifty test program that can be executed in user
space, make sure endian detection works reliably in user space too.
Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Precompute more crc32 values(0xcc00, 0xcc0000 and 0xcc000000) into tables.
 This increases the table size from 1KB to 4KB but the performance benfit
makes it worth it:

28% faster on MPC8321, 266 MHz
2x faster on Core 2 Duo, 3.1GHz

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Acked-by: NJean Delvare <khali@linux-fr.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I've seen various new Kconfigs with rather unhelpful one liner
descriptions.  Add a Kconfig warning for a minimum length of the Kconfig
help section.

Right now I arbitarily chose 4. The exact value can be debated.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove own implementation of hex_to_bin().
Signed-off-by: NAndy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of using own implementation involve hex_to_bin() function.
Signed-off-by: NAndy Shevchenko <ext-andriy.shevchenko@nokia.com>
Acked-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove own implementation of hex_to_bin().
Signed-off-by: NAndy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: "Richard Russon (FlatCap)" <ldm@flatcap.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of using own implementation involve hex_to_bin() function.
Signed-off-by: NAndy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove own implementation of hex_to_bin().
Signed-off-by: NAndy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of using own implementation which potentialy has bugs involve
hex_to_bin() function.  It requires to have hex_to_bin() implementation
introduced by starter patch in series.
Signed-off-by: NAndy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Duncan Sands <duncan.sands@free.fr>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove own implementation of hex_to_bin().
Signed-off-by: NAndy Shevchenko <ext-andriy.shevchenko@nokia.com>
Acked-by: NTilman Schmidt <tilman@imap.cc>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

hex_to_bin() is a little method which converts hex digit to its actual
value.  There are plenty of places where such functionality is needed.

[akpm@linux-foundation.org: use tolower(), saving 3 bytes, test the more common case first - it's quicker]
[akpm@linux-foundation.org: relocate tolower to make it even faster! (Joe)]
Signed-off-by: NAndy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: Duncan Sands <duncan.sands@free.fr>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: "Richard Russon (FlatCap)" <ldm@flatcap.org>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reduce char linebuf[200] to the actual size required., which is 32 * 3 + 2
+ 32 + 1, ie: linebuf[131].

Change examples to use bool true not int 1.

Align multiline argument indentation to open parenthesis.

Use temporary for ptr[j] so trigraph fits on single line.

Convert printk ptr from %*p, (int)(2 * sizeof(void *)) to %p as %p uses
the same calculation for size.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NFlorian Ragwitz <rafl@debian.org>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This doesn't change behavior at all.  In the original code, if nwords was
zero then ddebug_parse_query() would return -EINVAL, now we just do it
earlier.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This changes the default of the option --git-all-signature-types to be
disabled by default.

The effect being, that only certain (currently Signed-Off-By:, Acked-by:
and Reviewed-By:) tags are used to get adresses of potential maintainers.

Motivated is this change by the desire to not 'spam' people unnecessary: A
Tested-By or a Reported-By is not ment as a hint that those people want
to/are able to review patches to the code in question.

In a quest to find resilient statistics for this i came up with this:

I produced a list of all the tag-signers not already covered with a
signed-off/acked/reviewed tag somewhere in the last year of git history.

Those were 650 addresses of "assumed non-developers".

And to check if those "assumed non-developers" are professional
testers/reporters worth cc'ing, i then counted their total appearences
in the git log:

469 were mentioned only once.
123 were mentioned twice.
38 three times
8 four times
5 six times
5 five times
1 eight times
1 fourteen times

I believe this supports my thesis, that the ''non-maintainer-tags'' are
not actively useful for patch-review.  (except probably the guy mentioned
fourteen times...)

But of course one could also find arguments to poke holes in this
statistics, for example does this statistic not include code-locality: A
tested-by on a patch that touches some specific piece of code can be more
worth than a signed-off in another part of the tree.

But...  let's play it safe and let's err on the "safe" side meaning to not
spam those people when in doubt.  We already have the signed-off's and
Maintainers file.  So this should be ok.  And if need be, the maintainers
can always forward the patch.

[i probably could make a diploma thesis out of this changelog :)]
Signed-off-by: NFlorian Mickler <florian@mickler.org>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Joe Perches <joe@perches.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow the use of a .get_maintainer.conf file to control the default
options applied when scripts/get_maintainer.pl is run.

.get_maintainer.conf can contain any valid command-line argument.

File contents are prepended to any additional command line arguments.

Multiple lines may be used, blank lines ignored, # is a comment.

Updated scripts/get_maintainer.pl version to 0.24
Signed-off-by: NJoe Perches <joe@perches.com>
Reviewed-by: NFlorian Mickler <florian@mickler.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When using --git to determine who to send a patch to, get_maintainers will
currently include all signatures.  This can include signers that simply
report an issue or test a patch.  Signers that use this tag are not
necessarily good candidates to review new patches.

This patch allows get_maintainers to optionally restrict output to only
signatures that use Signed-off-by:, Acked-by:, or Reviewed-by:.

Signed-off-by: is included because those are people who are responsible
for the code.

Acked-by: is questionable, but as signers that use this tag tend to be
active linux gatekeepers, false positives are tolerable.

Reviewed-by: is included because signers responsible for the code thought
that the review feedback for a changeset by that signer was valuable.

This patch has been modified from Florian's original submission to change
the supported signature types to the canonical forms and use slightly
different spacing.  A couple of spacing issues were also corrected in the
original source.  The command line argument was also renamed.
Original-patch-by: NFlorian Mickler <florian@mickler.org>
Signed-off-by: NFlorian Mickler <florian@mickler.org>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mark static functions with noinline_for_stack

Before:

  akpm:/usr/src/25> objdump -d lib/vsprintf.o | perl scripts/checkstack.pl
  0x00000e82 pointer [vsprintf.o]:                        344
  0x0000198c pointer [vsprintf.o]:                        344
  0x000025d6 scnprintf [vsprintf.o]:                      216
  0x00002648 scnprintf [vsprintf.o]:                      216
  0x00002565 snprintf [vsprintf.o]:                       208
  0x0000267c sprintf [vsprintf.o]:                        208
  0x000030a3 bprintf [vsprintf.o]:                        208
  0x00003b1e sscanf [vsprintf.o]:                         208
  0x00000608 number [vsprintf.o]:                         136
  0x00000937 number [vsprintf.o]:                         136

After:

  akpm:/usr/src/25> objdump -d lib/vsprintf.o | perl scripts/checkstack.pl
  0x00000a7c symbol_string [vsprintf.o]:                  248
  0x00000ae8 symbol_string [vsprintf.o]:                  248
  0x00002310 scnprintf [vsprintf.o]:                      216
  0x00002382 scnprintf [vsprintf.o]:                      216
  0x0000229f snprintf [vsprintf.o]:                       208
  0x000023b6 sprintf [vsprintf.o]:                        208
  0x00002ddd bprintf [vsprintf.o]:                        208
  0x00003858 sscanf [vsprintf.o]:                         208
  0x00000625 number [vsprintf.o]:                         136
  0x00000954 number [vsprintf.o]:                         136
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

New parts supported:
	AD5170, AD5171, AD5172, AD5173, AD5273
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

New parts supported:
	AD5280, AD5282, ADN2860
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

New parts supported:
	AD5241, AD5242, AD5243, AD5245, AD5246, AD5247, AD5248
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Split the bus logic out into separate files so that we can handle I2C and
SPI busses independently.  The new SPI bus logic brings in support for a
lot more parts:

	AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
	AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
	AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
	AD7376, AD8400, AD8402, AD8403, ADN2850

[randy.dunlap@oracle.com: fix ad525X_dpot build]
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The possible output data is 16bits, not 8bits, so don't truncate it.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Macro away the duplication to make maintenance easier.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Minor cleanup on duplicate __{start/stop}__ksymtab_gpl_future.
Signed-off-by: NWenji Huang <wenji.huang@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For now, all users of ratelimit_state allocates it statically, so
DEFINE_RATELIMIT_STATE() is enough.  But, I want to use ratelimit_state
for fs, i.e.  per super_block to suppress too many error reports.

So, this adds ratelimit_state_init() to initialize ratelimite_state
which is dynamically allocated, instead of opencoding.
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ratelimit_state initialization of printk_ratelimited() seems broken.  This
fixes it by using DEFINE_RATELIMIT_STATE() to initialize spinlock
properly.
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For misc devices, inode->i_cdev doesn't point to the device drivers own
data.  Link between file operations and device driver internal data is
lost.  Pass pointer to misc device struct via file private data for driver
open function use.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

32-bit Sparc used to only allow usage of 24-bit of it's atomic_t type.
This was corrected with linux 2.6.3 when Keith M Wesolowski changed the
implementation to use the parisc approach of having an array of spinlocks
to protect the atomic_t.

These warnings were also removed from the sparc implementation when the
new implementation was merged in BKrev:402e4949VThdc6D3iaosSFUgabMfvw, but
the warning still remained in some other places without any 24-bit-only
atomic_t implementation inside the kernel.

We should remove these warnings to allow users to rely on the full 32-bit
range of atomic_t.
Signed-off-by: NPeter Fritzsche <peter.fritzsche@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current logging macros are
pr_<level>, dev_<level>, netdev_<level>, and netif_<level>.
pr_ uses warning, the other use warn.

Standardize these logging macros a bit more by adding pr_warn and
pr_warn_ratelimited.

Right now, there are:

$ for level in emerg alert crit err warn warning notice info ; do \
    for prefix in pr dev netdev netif ; do \
      echo -n "${prefix}_${level}:	`git grep -w "${prefix}_${level}" | wc -l`	" ; \
    done ; \
    echo ; \
  done
pr_emerg: 	45	dev_emerg: 	4	netdev_emerg: 	1	netif_emerg: 	4
pr_alert: 	24	dev_alert: 	36	netdev_alert: 	1	netif_alert: 	6
pr_crit: 	24	dev_crit: 	22	netdev_crit: 	1	netif_crit: 	4
pr_err:  	2013	dev_err: 	8467	netdev_err: 	267	netif_err: 	240
pr_warn: 	0	dev_warn: 	1818	netdev_warn: 	126	netif_warn: 	23
pr_warning: 	773	dev_warning: 	0	netdev_warning:	0	netif_warning: 	0
pr_notice: 	148	dev_notice: 	111	netdev_notice: 	9	netif_notice: 	3
pr_info: 	1717	dev_info: 	3007	netdev_info: 	101	netif_info: 	85
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Quote from Nick piggin's about btrfs patch
- http://www.mail-archive.com/linux-btrfs@vger.kernel.org/msg04472.html.

"add_to_page_cache_lru is exported, so it should be used. Benefits over
using a private pagevec: neater code, 128 bytes fewer stack used, percpu
lru ordering is preserved, and finally don't need to flush pagevec
before returning so batching may be shared with other LRU insertions."

Let's use it instead of private pagevec in ntfs, too.
Signed-off-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NAnton Altaparmakov <aia21@cantab.net>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cached_page and lru_pvec have not been used.  Let's remove the arguments.
Signed-off-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NAnton Altaparmakov <aia21@cantab.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>