This patch adds a new debugfs file "rc_stats_csv" to output Minstrels
statistics in a common csv format that is easy to parse.
Signed-off-by: NThomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: NStefan Venz <ikstream86@gmail.com>
Acked-by: NFelix Fietkau <nbd@openwrt.org>
[remove printing current time of day]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch restructures the rc_stats debugfs table of Minstrel-HT in
order to achieve better human readability. A new layout of the
statistics and a new header is added. In addition to the old layout
there are two new columns of information added:
idx	- representing the rate index of each rate in mac80211 which
	  can be used to set specific rates as fixed rate via debugfs
airtime	- the tx-time in micro seconds that a 1200 Byte packet
	  takes to be transmitted over the air at the given rate

The old layout of rc_stats:

type           rate      tpt eprob *prob ret  *ok(*cum)        ok(      cum)
HT20/LGI       MCS0      5.6 100.0 100.0   1    0(   0)         1(        1)
HT20/LGI   B   MCS1     10.5 100.0 100.0   0    0(   0)         1(        1)
HT20/LGI  A    MCS2     14.8 100.0 100.0   0    0(   0)         1(        1)
...

is changed into this new layout:

            best   ________rate______    __statistics__    ________last_______    ______sum-of________
mode guard #  rate  [name   idx airtime]  [ ø(tp) ø(prob)]  [prob.|retry|suc|att]  [#success | #attempts]
HT20  LGI  1         MCS0     0    1480      0.0      0.0      0.0   1     0 0             0   0
HT20  LGI  1     B   MCS1     1     740     10.5    100.0    100.0   0     0 0             1   1
HT20  LGI  1    A    MCS2     2     496     14.8    100.0    100.0   0     0 0             1   1
...
Signed-off-by: NThomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: NStefan Venz <ikstream86@gmail.com>
Acked-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch restructures the rc_stats debugfs table of Minstrel in
order to achieve better human readability. A new layout of the
statistics and a new header is added. In addition to the old layout
there are two new columns of information added:
idx	- representing the rate index of each rate in mac80211 which
	  can be used to set specific rates as fixed rate via debugfs
airtime - the tx-time in micro seconds that a 1200 Byte packet
	  takes to be transmitted over the air at the given rate

The old layout of rc_stats:

    rate      tpt  eprob *prob ret  *ok(*cum)        ok(      cum)
 DP 1          0.9  93.5 100.0   1    0(   0)         2(        2)
    2          0.4  40.0 100.0   0    0(   0)         4(        10)
    5.5        0.0   0.0   0.0   0    0(   0)         0(        0)
...

is changed into this new layout:

best   _______rate_____    __statistics__    ________last_______    ______sum-of________
rate  [name idx tx-time]  [ ø(tp) ø(prob)]  [prob.|retry|suc|att]  [#success | #attempts]
 DP   1     0     9738      0.9    93.5     100.0   1     1 1             2   2
      2     1     4922      0.4    40.0     100.0   1     0 0             4   10
      5.5   2     1858      0.0     0.0       0.0   2     0 0             0   0
...
Signed-off-by: NThomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: NStefan Venz <ikstream86@gmail.com>
Acked-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Patch eeca9fce (cfg80211: Schedule
timeout for all CRDA call) introduced a regression, where in case
that crda is not installed (or not configured properly etc.), the
regulatory core will needlessly continue to call it, polluting the
log with the following log:

"cfg80211: Calling CRDA to update world regulatory domain"

Fix this by limiting the number of continuous CRDA request failures.
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

We currently have a hand-rolled table with 256 entries and are
using the last byte of the MAC address as the hash. This hash
is obviously very fast, but collisions are easily created and
we waste a lot of space in the common case of just connecting
as a client to an AP where we just have a single station. The
other common case of an AP is also suboptimal due to the size
of the hash table and the ease of causing collisions.

Convert all of this to use rhashtable with jhash, which gives
us the advantage of a far better hash function (with random
perturbation to avoid hash collision attacks) and of course
that the hash table grows and shrinks dynamically with chain
length, improving both cases above.

Use a specialised hash function (using jhash, but with fixed
length) to achieve better compiler optimisation as suggested
by Sergey Ryazanov.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Richard Cochran says:

====================
ptp: remove open coded ns_to_timespec64 and reverse

This patch series is a follow up to the recent timespec64 work for the
PTP Hardware Clock drivers.  Arnd noticed that drivers are using open
coded implementations of ns_to_timespec64 and timespec64_to_ns.  This
series replaces the open coded logic with the helper functions.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.

Compile tested only.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.

Compile tested only.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the driver to use ns_to_timespec64() instead of
open coding the same logic.

Compile tested only.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.

Compile tested only.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the driver to use ns_to_timespec64() instead of
open coding the same logic.

Compile tested only.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the driver to use ns_to_timespec64() instead of
open coding the same logic.

Compile tested only.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.

Compile tested only.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the driver to use ns_to_timespec64() instead of
open coding the same logic.

Compile tested only.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Acked-by: NJacob Keller <jacob.e.keller@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.

Compile tested only.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When mii-mon discovers that the link is up, it will call
bond_3ad_handle_link_change() but we forget to add the LACP_ENABLED
flag when we discover the speed and duplex for the slave link are
normal.

Change-Id: Ie8b268ecfeea0f99bf9fdcd72706c0653f9d9e49
Signed-off-by: NMahesh Bandewar <maheshb@google.com>
Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

AD_PORT_ACTOR_CHURN and AD_PORT_PARTNER_CHURN are already present and
essentially BOND_MONITOR_CHURNED is a combination of these two definitions.
Signed-off-by: NMahesh Bandewar <maheshb@google.com>
Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nicolas Ferre says:

====================
net/macb: fixes after big driver update

The recent modifications to the macb driver lead to issues with the probe
function code flow. Here are some attempt to fix them.
This time, some more issues are fixed related to the clock as reported by Boris
Brezillon.

The series is written on top of net-next.

Changes in v2:
- address Cyrille comment about exit condition of queue configuration loop
- add fixes for probe sequence related to clocks
- add ethtool register dump
- fix peripheral version test
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As we need to check peripheral version from the hardware during probe, I
introduce a little helper to unify these tests. It would prevent to
de-synchronize the test like previously observed.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We currently need two checks of the peripheral version in MACB_MID register.
One of them got out of sync after modification by 8a013a9c (net: macb:
Include multi queue support for xilinx ZynqMP ethernet version).
Fix this in macb_configure_caps() so that xilinx ZynqMP will be considered
as a GEM flavor.

Fixes: 8a013a9c ("net: macb: Include multi queue support for xilinx ZynqMP
ethernet version")
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Cc: <stable@vger.kernel.org> #4.0 (if it doesn't make it for -final)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

User i/o register EMAC_USRIO or GMAC_UR can be found on both macb and gem
flavors of the peripheral. By using the proper accessor, we can add it to the
register dump feature of ethtool.
Increment the version of this API so it can be noticed from user space.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As accessing the peripheral registers need the clocks to be set, we have to
enable them as soon as possible. Their configuration depend on the type of
device used and determined by the DT compatible string. That lead to add
another initialization function in the DT configuration structure.
As the device private structure length depend on an information read in the
registers, we have to store the clock pointers in temporary variables before
feeding the structure fields.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As a non-native English speaker, I would correct "capacities" of the macb
peripheral to "capabilities": correct me if I'm wrong!
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Capabilities configuration by macb_configure_caps() was moved far too late by
421d9df0 (net/macb: merge at91_ether driver into macb driver) which would
lead to badly configured hardware.
So, move this function to early probe and modify its prototype to re-gain its
original behavior.
DT data retrieval is also moved to simplify the probe code flow.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As we access the MID register directly, we need to tell why
we don't use the macb_is_gem() dedicated function.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When merging at91_ether and macb driver during 421d9df0 (net/macb: merge
at91_ether driver into macb driver) the probe function has been split. The code
dealing with initialization of queues is now moved in macb_init() which needs
information computed in the parent macb_probe() function.
So, add the queue_mask information to the private structure and use it when
needed in macb_init().
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Cc: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit cb6e0b36 ("net: smc91x: make use of 4th parameter to devm_gpiod_get_index")
caused the following build warning:

drivers/net/ethernet/smsc/smc91x.c:2208:6: warning: unused variable 'res' [-Wunused-variable]

Remove the unused 'res' variable.
Reported-by: NOlof's autobuilder <build@lixom.net>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-davem-2015-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Lots of updates for net-next; along with the usual flurry
of small fixes, cleanups and internal features we have:
 * VHT support for TDLS and IBSS (conditional on drivers though)
 * first TX performance improvements (the biggest will come later)
 * many suspend/resume (race) fixes
 * name_assign_type support from Tom Gundersen
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unlike other places, this function uses name "dev" for what should be
"orig_dev", which might be a bit confusing. So fix this.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
mlx4: Extend statistics gathering and display

This series from Eran and Matan extends the statistics collected and later
reported to the user via ethtool for native mode and SRIOV PF.

More Packet statistics, PFC statistics and global pause statistics
are now displayed via ethtool.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

More packet statistics are now calculated and visible to the user via
ethtool:

- RX packet errors statistics.
- TX/RX drops are now calculated.
- TX multicast and broadcast statistics.
- RX/TX per priority bytes statistics.
- RX/TX no vlan packets and bytes statistics.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Flow control per priority and Global pause counters are now visible via
ethtool.  The counters shows statistics regarding pauses in the device.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NShani Michaeli <shanim@mellanox.com>
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This will allow parallel access to the statistics bitmap.
A pre-step for adding PFC counters, where the statistics bitmap
can be dynamically changed when modifying the PFC setting.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver uses a bitmask to indicate which statistics should be
displayed to the user in ethtool. The bitmask is u64, therefore we are
limited for a selective view of up to 64 statistics. Extend the bitmap
in order to show more than 64 statistics.

In addition, add packet statistics to the ethtool display for PF.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The statistics bitmap belongs to the Ethernet driver, move it there.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add mlx4_stats.h file and move there all statistics structs and marcos.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Two counters (rx_chksum_complete and tx_chksum_offload) are not displayed
under SRIOV for the PF via ethtool because their bit mask is off, fix that.

Fixes: f8c6455b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE')
Fixes: 9fab426d ('mlx4: add a new xmit_more counter')
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Petri Gynther says:

====================
net: bcmgenet: code cleanup

Five patches to clean up bcmgenet code:
1. add UMAC_IRQ_RXDMA_DONE and UMAC_IRQ_TXDMA_DONE
2. remove __bcmgenet_fini_dma()
3. fix bcmgenet_open()
4. add UMAC_IRQ_LINK_EVENT
5. fix the call to phy_mac_interrupt()
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>