Suppress warnings for systems that do not recognize LFS_*.

 getconf: no such configuration parameter `LFS_CFLAGS'
 getconf: no such configuration parameter `LFS_LDFLAGS'
 getconf: no such configuration parameter `LFS_LIBS'

Fixes: d7f14c66 ("kbuild: Enable Large File Support for hostprogs")
Reported-by: NChen Feng <puck.chen@hisilicon.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

.PHONY is a target, not a variable.
Signed-off-by: NUlf Magnusson <ulfalizer@gmail.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

With the brand-new syntax extension of Kconfig, we can directly
check the compiler capability in the configuration phase.

If the cc-can-link.sh fails, the BPFILTER_UMH is automatically
hidden by the dependency.

I also deleted 'default n', which is no-op.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.

That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.

HOWEVER.

It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_NONE is not set
  # CONFIG_CC_STACKPROTECTOR_REGULAR is not set
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_STACKPROTECTOR_AUTO=y

and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.

The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one.  This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).

This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_STACKPROTECTOR=y
  CONFIG_STACKPROTECTOR_STRONG=y
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.
Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As Documentation/kbuild/kconfig-language.txt notes, 'select' should be
be used with care - it forces a lower limit of another symbol, ignoring
the dependency.  Currently, KCOV can select GCC_PLUGINS even if arch
does not select HAVE_GCC_PLUGINS.  This could cause the unmet direct
dependency.

Now that Kconfig can test compiler capability, let's handle this in a
more sophisticated way.

There are two ways to enable KCOV; use the compiler that natively
supports -fsanitize-coverage=trace-pc, or build the SANCOV plugin if
the compiler has ability to build GCC plugins.  Hence, the correct
dependency for KCOV is:

  depends on CC_HAS_SANCOV_TRACE_PC || GCC_PLUGINS

You do not need to build the SANCOV plugin if the compiler already
supports -fsanitize-coverage=trace-pc.  Hence, the select should be:

  select GCC_PLUGIN_SANCOV if !CC_HAS_SANCOV_TRACE_PC

With this, GCC_PLUGIN_SANCOV is selected only when necessary, so
scripts/Makefile.gcc-plugins can be cleaner.

I also cleaned up Kconfig and scripts/Makefile.kcov as well.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>

Move the test for -fstack-protector(-strong) option to Kconfig.

If the compiler does not support the option, the corresponding menu
is automatically hidden.  If STRONG is not supported, it will fall
back to REGULAR.  If REGULAR is not supported, it will be disabled.
This means, AUTO is implicitly handled by the dependency solver of
Kconfig, hence removed.

I also turned the 'choice' into only two boolean symbols.  The use of
'choice' is not a good idea here, because all of all{yes,mod,no}config
would choose the first visible value, while we want allnoconfig to
disable as many features as possible.

X86 has additional shell scripts in case the compiler supports those
options, but generates broken code.  I added CC_HAS_SANE_STACKPROTECTOR
to test this.  I had to add -m32 to gcc-x86_32-has-stack-protector.sh
to make it work correctly.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NKees Cook <keescook@chromium.org>

Commit 21c54b77 ("kconfig: show compiler version text in the top
comment") was intended to detect the compiler upgrade, but Geert
reported a breakage on the m68k build.

The compiler upgrade is detected by the change of the environment
variable, CC_VERSION_TEXT, which contains the first line of the output
from $(CC) --version.  Currently, this works well when CROSS_COMPILE
is given via the environment variable or the Make command line.

However, some architectures such as m68k can specify CROSS_COMPILE
from arch/$(SRCARCH)/Makefile as well.  In this case, "make ARCH=m68k"
ends up with endless syncconfig loop.

  $ make ARCH=m68k defconfig
  *** Default configuration is based on 'multi_defconfig'
  #
  # configuration written to .config
  #
  $ make ARCH=m68k
  scripts/kconfig/conf  --syncconfig Kconfig
  scripts/kconfig/conf  --syncconfig Kconfig
  scripts/kconfig/conf  --syncconfig Kconfig
  scripts/kconfig/conf  --syncconfig Kconfig

Things are happening like this:

Because arch/$(SRCARCH)/Makefile is included after CC_VERSION_TEXT
is set, it contains the host compiler version in the defconfig phase.

To create or update auto.conf, the following line is triggered:

include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
        $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig

This recurses the top Makefile after arch/$(SRCARCH)/Makefile is
included.  CROSS_COMPILE is set to a m68k toolchain prefix and
exported to the recursed Make.  Then, syncconfig is invoked with
the target compiler version in CC_VERSION_TEXT.

The Make will restart because auto.conf and auto.conf.cmd have been
updated.  At this point, CROSS_COMPILE is reset, so CC_VERSION_TEXT
is set to the host compiler version again.  Then, syncconfig is
triggered due to the change of CC_VERSION_TEXT.  This loop continues
eternally.

To fix this problem, $(CC_VERSION_TEXT) must be evaluated only after
arch/$(SRCARCH)/Makefile.  Setting it earlier is OK as long as it is
defined by using the '=' operator instead of ':='.

For the defconfig phase, $(CC_VERSION_TEXT) is evaluated when Kbuild
descends into scripts/kconfig/, so it contains the target compiler
version correctly.

include/config/auto.conf.cmd references $(CC_VERSION_TEXT) as well,
so it must be included after arch/$(SRCARCH)/Makefile.

Fixes: 21c54b77 ("kconfig: show compiler version text in the top comment")
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org>

check that CC can build executables and use that compiler instead of HOSTCC
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By default, sparse assumes a 64bit machine when compiled on x86-64
and 32bit when compiled on anything else.

This can of course create all sort of problems for the other archs, like
issuing false warnings ('shift too big (32) for type unsigned long'), or
worse, failing to emit legitimate warnings.

Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT,
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the now unneeded -m32/-m64 in arch specific Makefiles.
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

The kernel depends on macros like __BYTE_ORDER__,
__BIG_ENDIAN__ or __LITTLE_ENDIAN__.

OTOH, sparse doesn't know about the endianness of the kernel and
by default uses the same as the machine on which sparse was built.

Ensure that sparse can predefine the macros corresponding to
how the kernel was configured by adding -m{big,little}-endian
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the equivalent done in arch specific Makefiles.
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Currently, $(CHECK) receives NOSTDINC_FLAGS twice:
* first directly in the main Makefile via CHECKFLAGS,
* then indirectly in scripts/Makefile.build via c_flags.

Since once is enough, leave the occurence via c_flags and
remove the one via CHECKFLAGS.
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

The kernel configuration phase is now tightly coupled with the compiler
in use.  It will be nice to show the compiler information in Kconfig.

The compiler information will be displayed like this:

  $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- config
  scripts/kconfig/conf  --oldaskconfig Kconfig
  *
  * Linux/arm64 4.16.0-rc1 Kernel Configuration
  *
  *
  * Compiler: aarch64-linux-gnu-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011
  *
  *
  * General setup
  *
  Compile also drivers which will not load (COMPILE_TEST) [N/y/?]

If you use GUI methods such as menuconfig, it will be displayed in the
top menu.

This is simply implemented by using the 'comment' statement.  So, it
will be saved into the .config file as well.

This commit has a very important meaning.  If the compiler is upgraded,
Kconfig must be re-run since different compilers have different sets
of supported options.

All referenced environments are written to include/config/auto.conf.cmd
so that any environment change triggers syncconfig, and prompt the user
to input new values if needed.

With this commit, something like follows will be added to
include/config/auto.conf.cmd

  ifneq "$(CC_VERSION_TEXT)" "aarch64-linux-gnu-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011"
  include/config/auto.conf: FORCE
  endif
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>

Now that 'shell' function is supported, this can be self-contained in
Kconfig.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NUlf Magnusson <ulfalizer@gmail.com>

To get access to environment variables, Kconfig needs to define a
symbol using "option env=" syntax.  It is tedious to add a symbol entry
for each environment variable given that we need to define much more
such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability
in Kconfig.

Adding '$' for symbol references is grammatically inconsistent.
Looking at the code, the symbols prefixed with 'S' are expanded by:
 - conf_expand_value()
   This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list'
 - sym_expand_string_value()
   This is used to expand strings in 'source' and 'mainmenu'

All of them are fixed values independent of user configuration.  So,
they can be changed into the direct expansion instead of symbols.

This change makes the code much cleaner.  The bounce symbols 'SRCARCH',
'ARCH', 'SUBARCH', 'KERNELVERSION' are gone.

sym_init() hard-coding 'UNAME_RELEASE' is also gone.  'UNAME_RELEASE'
should be replaced with an environment variable.

ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced
without '$' prefix.

The new syntax is addicted by Make.  The variable reference needs
parentheses, like $(FOO), but you can omit them for single-letter
variables, like $F.  Yet, in Makefiles, people tend to use the
parenthetical form for consistency / clarification.

At this moment, only the environment variable is supported, but I will
extend the concept of 'variable' later on.

The variables are expanded in the lexer so we can simplify the token
handling on the parser side.

For example, the following code works.

[Example code]

  config MY_TOOLCHAIN_LIST
          string
          default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)"

[Result]

  $ make -s alldefconfig && tail -n 1 .config
  CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E"
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>

Kbuild provides a couple of ways to specify CROSS_COMPILE:

[1] Command line
[2] Environment
[3] arch/*/Makefile (only some architectures)
[4] CONFIG_CROSS_COMPILE

[4] is problematic for the compiler capability tests in Kconfig.
CONFIG_CROSS_COMPILE allows users to change the compiler prefix from
'make menuconfig', etc.  It means, the compiler options would have
to be all re-calculated everytime CONFIG_CROSS_COMPILE is changed.

To avoid complexity and performance issues, I'd like to evaluate
the shell commands statically, i.e. only parsing Kconfig files.

I guess the majority is [1] or [2].  Currently, there are only
5 defconfig files that specify CONFIG_CROSS_COMPILE.
  arch/arm/configs/lpc18xx_defconfig
  arch/hexagon/configs/comet_defconfig
  arch/nds32/configs/defconfig
  arch/openrisc/configs/or1ksim_defconfig
  arch/openrisc/configs/simple_smp_defconfig
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>

The kbuild cache was introduced to remember the result of shell
commands, some of which are expensive to compute, such as
$(call cc-option,...).

However, this turned out not so clever as I had first expected.
Actually, it is problematic.  For example, "$(CC) -print-file-name"
is cached.  If the compiler is updated, the stale search path causes
build error, which is difficult to figure out.  Another problem
scenario is cache files could be touched while install targets are
running under the root permission.  We can patch them if desired,
but the build infrastructure is getting uglier and uglier.

Now, we are going to move compiler flag tests to the configuration
phase.  If this is completed, the result of compiler tests will be
naturally cached in the .config file.  We will not have performance
issues of incremental building since this testing only happens at
Kconfig time.

To start this work with a cleaner code base, remove the kbuild
cache first.

Revert the following commits:
Commit 9a234a2e ("kbuild: create directory for make cache only when necessary")
Commit e17c400a ("kbuild: shrink .cache.mk when it exceeds 1000 lines")
Commit 4e562071 ("kbuild: Cache a few more calls to the compiler")
Commit 3298b690 ("kbuild: Add a cache for generated variables")
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>

Modules do not tend to cope with -ffunction-sections, even though they
do not link with -gc-sections. It may be possible for unused symbols to
be trimmed from modules, but in general that would take much more work
in architecture module linker scripts.

For now, enable these only for kernel build.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a97 ("arch: remove blackfin port"),
commit bb6fb6df ("metag: Remove arch/metag/"), respectively.

No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX,
hence the last argument of scripts/depmod.sh can be removed.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>

Since commit e501ce95 ("x86: Force asm-goto"), aarch64 build on
distributions which enable PIE by default (e.g. openSUSE Tumbleweed) does
not detect support for asm goto correctly. The problem is that ARM specific
part of scripts/gcc-goto.sh fails with PIE even with recent gcc versions.
Moving the asm goto detection up in Makefile put it before the place where
we disable PIE. As a result, kernel is built without jump label support.

Move the lines disabling PIE before the asm goto test to make it work.

Fixes: e501ce95 ("x86: Force asm-goto")
Reported-by: NAndreas Faerber <afaerber@suse.com>
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Clang does not recognize this compiler option.
Reported-by: NPrasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

The __FILE__ macro is used everywhere in the kernel to locate the file
printing the log message, such as WARN_ON(), etc.  If the kernel is
built out of tree, this can be a long absolute path, like this:

  WARNING: CPU: 1 PID: 1 at /path/to/build/directory/arch/arm64/kernel/foo.c:...

This is because Kbuild runs in the objtree instead of the srctree,
then __FILE__ is expanded to a file path prefixed with $(srctree)/.

Commit 9da0763b ("kbuild: Use relative path when building in a
subdir of the source tree") improved this to some extent; $(srctree)
becomes ".." if the objtree is a child of the srctree.

For other cases of out-of-tree build, __FILE__ is still the absolute
path.  It also means the kernel image depends on where it was built.

A brand-new option from GCC, -fmacro-prefix-map, solves this problem.
If your compiler supports it, __FILE__ is the relative path from the
srctree regardless of O= option.  This provides more readable log and
more reproducible builds.

Please note __FILE__ is always an absolute path for external modules.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Our convention is to distinguish file types by suffixes with a period
as a separator.

*-asn1.[ch] is a different pattern from other generated sources such
as *.lex.c, *.tab.[ch], *.dtb.S, etc.  More confusing, files with
'-asn1.[ch]' are generated files, but '_asn1.[ch]' are checked-in
files:
  net/netfilter/nf_conntrack_h323_asn1.c
  include/linux/netfilter/nf_conntrack_h323_asn1.h
  include/linux/sunrpc/gss_asn1.h

Rename generated files to *.asn1.[ch] for consistency.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Clean up these patterns from the top Makefile to omit 'clean-files'
in each Makefile.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Files suffixed by .lex.c, .tab.[ch] are generated lexers, parsers,
respectively.  Clean them up globally from the top Makefile.

Some of the final host programs those lexer/parser are linked into
are necessary for building external modules, but the intermediates
are unneeded.  They can be cleaned away by 'make clean' instead of
'make mrproper'.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NFrank Rowand <frowand.list@gmail.com>